Thomson Android Percee TV, remains on booting animation. - Philips, Sony, TCL Android TV

Hi people.
I have a smart TV android, Thomson percee tv, 65" (65UD6406 S).
Happens that it remains on android animated loading screen, forever. I guess that I messed up, when in developer mode, clicked on (somewhere in "showing pointer" (or something similar), in developper menu, that I had activated months ago)... It automatically turned off, and then tried to restart, without results.
Tried to unplug, but still doing the same)
Can't do any kind of factory reset, as the TV hasn't any physical buttons.
Region is Europe, Portugal.
Edit:
Found hidden power button behind "standby led".
Unpluged cord line, and while pressing down power button, pluged it again, waited for about 15 seconds, and an image with the android robot, appeared, with the message "error".
Downloaded the updatee file (V8-T658T01-LF1V543.zip) from manufacturers site to a memory stick (fat32, 8 Gb), and did the same as before.
This time the updating menu appeared, and went throughout the whole updating process.
But when booting, android boot animation logo was there forever, as before.
What should i do to fix it?
Is there a way to replace all the firmware, instead of updating, like as installing a ROM in a smartphone?
Thanks in advance for any answer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit (again)
Ive done it at last.
Inserted the stick, and while pressing "power" button, connected the cord to the wall socket.
Waited a few seconds, and got a message, saying that there was no software present to do the update
Ignored it, and kept waiting... after a short while the message changed, and the updating bar showed up.
Waited to it ro run till the end, and the animated image of Android loading appeared
To be honest, I hadn´r any faith that it would make it... but it worked, at last!!!! It booted successfully.
So.... I guess the problem was with the message. It was saying me that there was no software, then i gave up a few times, taking out the stick. This time I ignored it, and it changed a few seconds later.

same problem
I have a same problem i activate showing pointer, and android not load, i update with last version download from thomson a but like you said it does the update but doesn't reset the android settings. I tried to insert a pendrive without software to do what you say, but after it comes out the message that it doesn't find the software starts loading android and it still doesn't start.
Can you tell me again what you did to reset the TV . Thanks

I downloaded several times the software, and tried to repair the TV sftware with no avail.
I didn't mention that my TV was in warranty yet, and called "Thomson" in Portugal.
A guy came to my home, and said the updating software was exactly that one i had downloaded, but was needed an addictional one to repair first. He had it, was necessary use two different sticks, one to repair, and other (the one I had) to update (reinstall).
But even his repairing software, showed a message, saying there was no software in the pen drive, however, he ignored it, and kept waiting. Then, in a minute, or so, later the process began to run.
After that was done, he took out that pen, and inserted the second, and the process ran well till the end, and everything became normal.
When I was talking with Thomson dealer on phone, I asked them to provide me the .zip file to repair it myself, as I had enough knowledge to do it, if i had it. But they denied, saying that they were not authorized to do it, because that stuff is only for credited technicians of the brand (They could have avoided to travel 200 km to come personally to my home).
I hadn't mentioned the technician before, when editing, because no one answered the post, and I guessed I was the only one with that kind of TV.
Anyway, it was completely free, as it was in warranty yet.
PS: To enter in contact with the technician, I called the store where I bought the TV, then they put me in contact with Thomson Portugal, and they told me to do (what i already had done, as you also did).
Told them it didn't work... then we combined the date for him to visit my home (the day after).
EDIT:
If you don't mind to try again... download the update file from https://www.mythomson.com/fr_fr/television-73-fr-fr/tv-uhd-86-fr-fr/serie-d64-4257
If the link doesn't open correctly from the forum, copy the link, and paste it on your browser search bar, this way, it will open well.
Scroll down the page, to access "Download"
After it is done, open the zip file, and IMPORTANT, read the directions on txt file.
I guess you have to unzip, and then get another zipped file. This last file, is not meant to be unzipped (is the update file).
You must format the USB stick (FAT32), before put the file in it (in the stick, must remain only this one file).
On tv, if you get a small black and white rectangle, with a message, saying there is no update data in the stick, ignore it, and wait anyway.
If it doesn't work... call the technician, or perhaps someone in XDA forum, can provide you better info.
I would be glad if you solved that.

ALbert76 said:
same problem
I have a same problem i activate showing pointer, and android not load, i update with last version download from thomson a but like you said it does the update but doesn't reset the android settings. I tried to insert a pendrive without software to do what you say, but after it comes out the message that it doesn't find the software starts loading android and it still doesn't start.
Can you tell me again what you did to reset the TV . Thanks
Click to expand...
Click to collapse
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.

Hdr videos on youtube are washed out after upgraded to latest v568..anyone know how to fix this issue. Thanks

Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
This solution works for me. Thank you very much.

Released is newer PKG file V574.....
http://celesw.tcl.com/CSEU%20TV/Software/MT58/V8-T658T01-LF1V574_PKG_USB_GMC.zip
and also OTA update....
http://www.mediacenter.tcl.eu/uploads/common/MT58_Android%20O_V574.zip
or V575 PKG....
Google Drive - Virus scan warning
drive.google.com

Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
Thank you man it works good

Hi all
got the same problem on my TCL. I've tried the Update.pkg onto a usb stick. No way... Got only a picture with red cross and "error!" message... some ideas?

kelly-x974 said:
Hi all
got the same problem on my TCL. I've tried the Update.pkg onto a usb stick. No way... Got only a picture with red cross and "error!" message... some ideas?
Click to expand...
Click to collapse
Your present firmware installed ?

Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
stasiof said:
Released is newer IMG file V574.....
http://celesw.tcl.com/CSEU%20TV/Software/MT58/V8-T658T01-LF1V574_PKG_USB_GMC.zip
and also OTA update....
http://www.mediacenter.tcl.eu/uploads/common/MT58_Android%20O_V574.zip
Click to expand...
Click to collapse
Do these firmwares work on 49UC6406?

strollaco said:
Do these firmwares work on 49UC6406?
Click to expand...
Click to collapse
Your present firmware installed ?

stasiof said:
Your present firmware installed ?
Click to expand...
Click to collapse
My tv shows the following:
Software version: V8-T658T01-LF1V570
SO TV+ version: V5.0.0(V8-2004241-MF1V500)

Yes, is works...
Latest is V8-T658T01-LF1V575.

Hello, i have TCL 55UC6406 with the same issue. TV will stuck on boot logo. I tried to update the firmware using USB stick, but without luck. Tried different versions, different usb sticks, but the update procedure will not start.
Procedure
1. Unplagged TV from wall socket
2. Inserted USB stick (formatted to FAT32) with Update.pkg file in root.
3. Press and hold power button on TV, than plugged to the wall socket.
4. Released the power button when "Thomson" logo appeared.
Nothing happend. No updating, no message. TV will start up and will stuck on boot logo again. Tried with hardware button on tv, power button on remote control, tried to release the button earlier, later, but nothing happend. When i try to hold the power button longer, TV wil turn off and on again. I dissasembed TV to reconnect all the cables - without luck. Version printed on sticker is V8-T658T01-LF1V353.
Any ideas ?
Thank. Mukates.

USB 2.0 stick in USB 2.0 TV port?
Try this:
Update_V8-T658T01-LF1R579_sign.pkg
Shared with Dropbox
www.dropbox.com

stasiof said:
Yes, is works...
Latest is V8-T658T01-LF1V575.
Click to expand...
Click to collapse
It worked. Thanks you.

stasiof said:
USB 2.0 stick in USB 2.0 TV port?
Try this:
Update_V8-T658T01-LF1R579_sign.pkg
Shared with Dropbox
www.dropbox.com
Click to expand...
Click to collapse
Did not work :-( I think that the mainboard is faulty. Different USB 2.0 sticks in port 2.0 (service port), but update never started.

stasiof said:
Released is newer IMG file V574.....
http://celesw.tcl.com/CSEU%20TV/Software/MT58/V8-T658T01-LF1V574_PKG_USB_GMC.zip
and also OTA update....
http://www.mediacenter.tcl.eu/uploads/common/MT58_Android%20O_V574.zip
Click to expand...
Click to collapse
Yes, this last firmware version worked on my Thomson 50UD6426.
The same issue as all of you here - stuck on boot Thomson logo.
Lubo-mir's instructions worked like charm.

Lubo-mir said:
I have a Thomson 55UD6426 and had the exact same problem.
I managed to solve it by an update from TCL. Apparently, they have very similar hardware with Thomson.
I searched for V8-T658T01-LF1V on TCL index page: http://celesw.tcl.com/
Found this key: CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip, MT58 in my case
Append the key to get the full link http://celesw.tcl.com/CSEU TV SW/MT58/V8-T658T01-LF1V551_PKG_USB_GMC.zip
Download and extract the ZIP file
Copy the file Update.pkg to USB stick (FAT-32 format) and safe remove from PC
Unplug the TV from power socket
Press and hold the TV power button
Plug the TV to power socket
Wait for Thomson logo to pop up
Release the power button
Wait a while, since there was no progress bar nor animation, just a text message
TCL update wizard showed up and this time it worked like charm
After I finished the entire setup, I tried the official Thomson update again and it worked finally.
Apparently the TCL update wiped out the Developer mode settings.
Hope this helps, good luck.
Click to expand...
Click to collapse
Thanks. That really helped me today on my 49UC6406 stuck on booting.
I got the V8-T658T01-LF1V574_PKG_USB_GMC.zip from the resource you provided (impossible to find a direct link on Thomson/TCL website).

Related

Eonon GA6164F - Recovering from no Boot/Brick - MTCD - RK3188 - MTCD_KLD

Here are my notes regarding the Eonon GA6164F and recovering from a black screen, cant boot, cant get into recovery.
Thanks to all the members and information on this site who i was able to piece together to come up with this solution.
I still dont know if my assumptions are totally correct, (please comment if i need to learn more) .
--
Back Story : My device was shipped with a Dec 2016 Android 5.1.1 build, and my steering wheel keys on my Camry were not all working.
Skip track and Back track were doing the same action, I tried re-learning/mapping in "WheelKeys Study" but nothing fixed it.
I resorted to using Vol - + for volume, Skip forward = skip track, MODE button (underneth) as = skip back.
I contacted Eonon about this, and they gave me a new Android build to try, update.img.
I wasnt able to update using the Settings - About - Software Update. (Error finding file).
I wasnt able to update using the standard recovery options (RES button, power etc.)
I did notice it was looking for dupdate.img.
I renamed my update.img file to dupdate.img and it was able to install via the Settings - About - Software Update.
The device rebooted , installed, then nothing... just a black screen.
I couldnt get any display up no matter what i tried.
After 24 hours or so of testing/trailing etc. I did manage to get it back working.
Im certain it was a bad update file because once i had it working again, i re-applied the update file i was supplied and sure enough, it broke it again.
These are my notes on how i recovered it.
--
Reboot into recovery on a healthy device
----------------
Hold RES
Press Power
Release RES (while still holding power)
Let go of power 1-2 secs after
Should reboot into recovery
---
Boot into recovery and restoring on a un-healthy device
----------------------
If cant boot into recovery
Download a Malaysk android build file (you may need to sign up to the hosting server site, and then add to downloads, then you can download to your computer from there)
Create bootable SD card using 'rockchip create upgrade disk tool v1.4'
(Run .exe as admin, dont check 'SD Boot', just leave 'Upgrade Firmware'
(If you cant see your USB drive, check that you have right clicked-Run as Admin in windows on the .exe)
Select Malaysk MTCD dupdate.img file
First post has download links
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/rom-malaysk-roms-mtcd-device-t3385309
Fully power off device (unplug from the back/or remove neg battery from car).
Insert new-bootable SD card into GPS slot
Plug device back in (or reconnect neg. battery cable to car)
- Device will boot into recovery and complain about no update file (thats fine) the Bootable SD card is just to get you into recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once in recovery, remove the GPS slot SD card and plug in a USB stick with an update.img
(my machine was looking for dupdate.img so i had to rename it).
Press power button to skip down the settings
Hold power button to select an option
Select 'Update system/mcu image from usb and clear all'
<processing>
Device reboots
Toyota logo shows (never progresses)
Press RES
Device reboots
Toyota logo shows
Android is starting (optimizing app XX of XX)
Malaysk recomends once the build is installed, to reboot into recovery once again using the normal method of buttons (RES + Power etc.) and 'wipe all data/factory and cache reset'
--
Now i am running a 10.8 build, because i was having trouble with the Google services on the latest, and i need to learn more about the 11.4 build and the MicroG stuff that replaces the Google services.
I am still suffering from the steering wheel controls issue, but at this point... i dont care...
I found i am getting a lot of "unable to read file" from the m4a files i have on my SD or USB card/stick and i need to learn more about how to get the steering wheel controls to action "other" music apps, i believe this is to do with the MTCD-Keys stuff, but going from what seemed like a dead device to this point, i want to wait a while before i start playing with it again.
I have added pictures in the thread, but they are linked to a photobucket, so i have also added them as attachments in case that photobucket account ever goes down.
Eonon Issue HELP!!!!
I have a Eonon Radio similar to this unit except it originally had 4.2.2 on it I recently tried to update it to 4.4.4 and mcu 2.81 which worked perfectly until restarting the car overnight. Radio booted into cannot find e:\
I then reverted back to 4.2.2 but I can get to the 4.2.2 recovery mode but every update.img I try to use only puts me into a reboot mode of the KiKat screen Maylay Mod Splash. Anyone out there can help suggest something?
I seem to have a half baked system that I can get into the recovery mode for 4.2.2. but the update.img says it cannot find it in the GPS sd card.
rogerradio said:
I have a Eonon Radio similar to this unit except it originally had 4.2.2 on it I recently tried to update it to 4.4.4 and mcu 2.81 which worked perfectly until restarting the car overnight. Radio booted into cannot find e:\
I then reverted back to 4.2.2 but I can get to the 4.2.2 recovery mode but every update.img I try to use only puts me into a reboot mode of the KiKat screen Maylay Mod Splash. Anyone out there can help suggest something?
I seem to have a half baked system that I can get into the recovery mode for 4.2.2. but the update.img says it cannot find it in the GPS sd card.
Click to expand...
Click to collapse
There are no Eonon radios, Eonon sell radios from several different manufacturers, the one in this thread is a Klyde - KLD.
If yours was 4.2.2./4.4.2 and MCU 2.85 then you have an MTCB unit and you need to try in the MTCB forums.
I've downloaded the rockchip create upgrade disk tool v1.4 and ran through your instructions. The HU won't boot off the SD card. Just sits there. If I remove the SD card, it immediately boots into the installed ROM. (I want to downgrade)
Hi
I tried reinstall the malaysk firmware but i rename dupdate.img as update.img and after reinstall now my device do not turn on, only show black screen like off and appear turn on nothing, i tried apply different methods of reset but nothing worked.
Help please!
Rodrizio said:
Hi
I tried reinstall the malaysk firmware but i rename dupdate.img as update.img and after reinstall now my device do not turn on, only show black screen like off and appear turn on nothing, i tried apply different methods of reset but nothing worked.
Help please!
Click to expand...
Click to collapse
Can you put it in recovery ?
typos1 said:
Can you put it in recovery ?
Click to expand...
Click to collapse
I don't know how exactly. I push the reset and power button in the sequence of first post but nothing happens. Only every time pushed the reset button the device light flashes but it's look like off
Rodrizio said:
I don't know how exactly. I push the reset and power button in the sequence of first post but nothing happens. Only every time pushed the reset button the device light flashes but it's look like off
Click to expand...
Click to collapse
Try making a bootable sdcard.
Guys your help pls! My head unit is stuck to the initial logo (Navigation System) and there seems to be nothing I can do to get into recovery to re-install the software. I have tried everything described above, no way to get into recovery with buttons, so I made and SD bootable card with various firmwares but the HU does not seem to read the card (I tried also with a USB stick, with no luck).
Is there anything else I can try to get it to work again?
My HU is a Px3 MTCE KGL 2 GB.
Thanks a lot for your help!!
Bobek82 said:
Guys your help pls! My head unit is stuck to the initial logo (Navigation System) and there seems to be nothing I can do to get into recovery to re-install the software. I have tried everything described above, no way to get into recovery with buttons, so I made and SD bootable card with various firmwares but the HU does not seem to read the card (I tried also with a USB stick, with no luck).
Is there anything else I can try to get it to work again?
My HU is a Px3 MTCE KGL 2 GB.
Thanks a lot for your help!!
Click to expand...
Click to collapse
Try @marchnz's recovery method.
typos1 said:
Try making a bootable sdcard.
Click to expand...
Click to collapse
I tried boot with a Sdcard bootable created with rockchip create upgrade disk tool (my sdcard is a 8gb size. I don´t know if the size make a issue) with the Malaysk dupdate.img file but nothing happend.
I follow the next steps.
I unplug from the back my device and insert the SD card bootable into GPS slot.
I plug again the device from the back and nothig, only the same screen black like off, I try differents combination of keys (press RES+Power ) and nothing....:crying:
It´s my device really dead? :crying:
Rodrizio said:
I tried boot with a Sdcard bootable created with rockchip create upgrade disk tool (my sdcard is a 8gb size. I don´t know if the size make a issue) with the Malaysk dupdate.img file but nothing happend.
I follow the next steps.
I unplug from the back my device and insert the SD card bootable into GPS slot.
I plug again the device from the back and nothig, only the same screen black like off, I try differents combination of keys (press RES+Power ) and nothing....:crying:
It´s my device really dead? :crying:
Click to expand...
Click to collapse
You shouldnt need to press anything, it should boot from the sdcard as soon as you turn it on. I would read @marchnz's unbricking threads if nothing its working.
Just want to know were I can find an "original" Rom for my Klyde PX5 MTCD unit.
I install Hal9k and it work like a charm but what if I have to send it back to Shenzhen?
Maybe I have to do this so before that I want to get it in original state.
Seelenwinter said:
Just want to know were I can find an "original" Rom for my Klyde PX5 MTCD unit.
I install Hal9k and it work like a charm but what if I have to send it back to Shenzhen?
Maybe I have to do this so before that I want to get it in original state.
Click to expand...
Click to collapse
Lol, no one send their unit back to China because it costs too much, its far easier and cheaper to repair it yourself, but there are factory ROMs around if you look, but I wouldnt bother looking unless you need to, cross that bridge (if and) when you come to it as they say.
Now it's a situation I really need that klyde mtcd px5 firmware.
Are there any hints or links?
Thanks ✌?
Yeah loads all over the forums.

tcl android tv firmware

where i can download tcl android tv firmware to flash it with usb
I want to know too, I think there's already TV's with version 9.0 but mine still on 8 I would love to update
I found this about a year ago. I don't have the source, but I remember getting it from a forum where a TCL developer shared the folder. Instructions are inside the folder, you have to translate that. It's still Oreo and I haven't tried by myself, so please be careful and flash it at your own risk. The last update was on July, so I don't know if they are still updating the repository. If you find pie upgrades, share here as well, please.
Instructions are inside the folder, you have to translate that.
Google says the instructions translate to:
"We change the file name to Update.pkg.
We format the pendrive to fat32.
We are installing Update.pkg.
We disconnect the tv from the power supply.
We connect a pendrive.
We hold the power button on the tv (not on the remote control).
We connect the voltage all the time by holding power on tv.
We hold until the update information appears."
I have a TCL 65" TV, purchased about 5 years ago and it was going ok until it wouldn't open YouTube so I did a reset on it with the hope that its memory would be rekindled. Alas, it didnt and now the once operating TV has nothing on it whatsoever ! What changed was it went from a TCL with Australian software on it to a Thompson with (EU) software on it. I can't scan channels of course (different country parameters), I can connect WiFi but not sure if it is working and it is now very slow to respond to remote, basically there is nothing there but I can still get into settings ect. It has a project Name of 65UB6406, Software V8-NT67FO2LF1V614, Chassis NT667EU and a Serial Num 1605DAJ60000600536. Is there any hope for this TV to be resurrected? I haven't been able to find any firmware for the Asia Pacific area for this TV. Cheers

TCL 65P815 firmware update problem and few things

Hi,
My problem is with 65P815. Fabric software was v084, i tried to update to V191 official version from TCL page, but after update and turning off TV, there is nothing shows on screen. I hear only sounds, and remote clicks, menu gone etc.
I search for info, and go back to v083 software, that helped and fixed TV. But now I don't know what to do to fix my TV. Tried to update with factory reset, nothing helped. Any tips how to deal with it ?
Next thing is concerned with soundbar thing, I have LG soundbar, is it possible to control soundbar over TCL's remote ? On my old Samsung TV it worked normally.
Here in TCL I don't see option to choose sound sourec (tv speaker/optical/hdmi), there is no option to mute TV speaker and move sound to soundbar. For now I use 2 remotes, but I want to use only one like in Samsung. I connected soundbar with optical cable to my TV.
Hi there. Trapped into same thing. After flash, I can hear 'bing' when you navigating in menu, backlight is working, but screen still black. Tried to flash V191(Inserted stick to USB2.0 with Update.img and plugged in with power button pressed). But got same thing. Led is blinking during i suppose flashing, but after that - nothing. Can it be somehow reset to stock or whatever?
you have to go back to 0.83
Turn off the TV, plug out the cable. put the drive into usb 2.0, press power button on TV's back and plug in power cord, if led start blinking wait about 10 mins to finish flashing. Sometimes you have to do this twice and TV will be ok.
Write to TCL support about your problem, let them prepare patch
Hmm... I have couple of questions then.
Does that mean v083 firmware didn't published somewhere?
And does that mean that we can't update 65p815 to any new firmware with Android 11?
what was your native FW ?
I tried to update to V191 which is on android 9, and update was failure. There is something wrong with the FW
File upload and sharing. Large file transfers. Free online cloud storage.
Visit this link to download: V8-R51MT02-LF1V083.zip
files.fm
here you can find v0.83
Android 11 is in beta now, we have to wait for official final update
I didn't check my original fware version. I know that was very stupid, but i supposed that just platform is matter.
Thanks for link. Will try this fware. Hope that will help, because i don't like to waste time with support, that usually just redirects to another operator...
it should, try second time if the first will failure
Ok, i just finish downloading and i'll start bring that baby to life. Thanks for help. Will report if suceed.
report it to TCL support to make technical request, and to fix that firmware
Ok. Just flashed twice. God damn, you have been right! All works like charm!
If someone will be as "lucky" as me, steps are next:
1. Load to local pc zip from above.
2. Format flash stick with FAT32 and copy it to root.
3. Insertt stick into USB 2.0 port.
4. Turn off TV power physycally.
5. Press and hold On/Off button on a TV's back and plug TV holding button pressed.
6. Hold for 10 secs, the led in front of TV will start blinking - it is ok.
7. Wait till it will stop blinking and wait some 5 mins after that.
8. Repeat steps 4-7. After TV restart it will show TCL logo and Android welcome screen will appear.
Ok now we should think about how to flash properly new version of FW,
latest official firmware is
https://www.mediacenter.tcl.eu/uploads/common/R51M_Android_P_V191.zip
When I try to flash with it, from menu update/local it works but only first time. When I turn off TV, then screen is black
I found such instruction, what to do after installation
Press the Settings button in the remote control:
Press OK on the icon: Picture.
Then go to the line Advanced settings.
Scroll down to the line: Brightness settings.
Scroll down to the line: Contrast.
With the remote control, do the key sequence: 6 4 2 5
The special menu appears.
Go to the line “Reset All” and press OK.
Go to the line “Reset Shop” and press OK.
Now unplug the main power cord.
Wait for ~2 minutes.
Plug back the main power cord and perform complete installation.
Click to expand...
Click to collapse
but haven't tested it yet.
Guys, can you post "Project ID" of your P815?
As ,for firmware V191 supose to be as attached....
50P815.....285
55P815.....284
65P815.....283,305
TV panel type can be found in service menu.....Main menu (1950)...
Just grabbed my panel name.
stasiof said:
Guys, can you post "Project ID" of your P815?
As ,for firmware V191 supose to be as attached....
50P815.....285
55P815.....284
65P815.....283,305
TV panel type can be found in service menu.....Main menu (1950)...
Click to expand...
Click to collapse
Seems on mine 65P815 by your table, the code should be ST6451D02-3 (code 305), but i have ST6451D02-H (code 283).
I have flashed v272 (img file) from v084 to my 65P815. Flashing went smoothly with no black screen ecountered. v272 works nicely with no problem.
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
@ancifil said:- "Did you reboot your TV after that?"
Sure I had rebooted it after flashing as I have been using this firmware for about a month.
I remembered flashing it 2 times. The first time was not successful (can't remember due to what). The second time reflash (same as what you did as in post #10) was smooth and without any problem.
jngiag, looks like it should, as for me... Maybe, i shall try 272 one more time.
superfly86, did you try 272?
jngiag said:
I remembered flashing it 2 times. The first time was not successful (can't remember due to what). The second time reflash (same as what you did as in post #10) was smooth and without any problem.
Click to expand...
Click to collapse
Btw, one thing. Can you remember, after you had flashed 272 first time and after that launched flash menu, to flash second time, was you able to see menu?
ancifil said:
Btw, one thing. Can you remember, after you had flashed 272 first time and after that launched flash menu, to flash second time, was you able to see menu?
Click to expand...
Click to collapse
I think it was due to a request to input pin while I was trying to setup live TV. I did not know the pin so I powered it off and reflashed as in post #10. Sorry, I can't remember it exactly.
ancifil said:
Seems on mine 65P815 by your table, the code should be ST6451D02-3 (code 283), but i have ST6451D02-H (code 305).
Click to expand...
Click to collapse
Your 65P815 with panel ST6451D02-H...... Project ID MUST be 283.
This is your problem with firmware (black screen ) !
So you need to change ID number from 305 to 283.
To modify the project ID, when TV is ‘ON’, with the remote control do the key sequence
0 6 2 5 9 8 .....MENU.... 283.
At the end of the key sequence the TV must reboots alone if the project ID has been understood by the TV. If it doesn’t, update the product with the last software available and try again.
Sometimes several tries can be necessary for successful project ID modification.
stasiof said:
Your 65P815 with panel ST6451D02-H...... Project ID MUST be 283.
This is your problem with firmware (black screen ) !
Click to expand...
Click to collapse
I've got that. But the hard thing is that i will not see this manipulation... I have to do that blindly. Risky stuff, right?

Thomson 55ud6406 boot loop

asking for help accidentally in the programming options, I activated the indicator, the TV turned off and the android logo is still there
I've already won various updare pendrives but after the update is complete, the android logo is still there. Is there any way to get into recovery? to make a short circuit on the motherboard?
MT58 platform......
read here:
Downgrade File for TCL C6 (Current Version: V8-T658T01-LF1V534)
Hey guys, I am new to the Android TV scene so bear with me. Recently bought TCL C6 TV. It updated yesterday to Android Oreo but the Color accuracy especially in HDR has fallen considerably, constant dimming of backlight for no reason and not to...
forum.xda-developers.com
I have read anything that I would not have uploaded, it will not reset the TV settings for me, do you have an idea?
grzechu023 said:
I have read anything that I would not have uploaded, it will not reset the TV settings for me, do you have an idea?
Click to expand...
Click to collapse
You need TV to work back or worry about not to reset TV ?
First try to unplug TV from power socket and after 10-15 min plug back .
If not,you nee to flash PKG file, to boot normal again.
I have already tried and you have nothing on a 100% working pkg file, each I uploaded the TV stops on the android logo after 4 hours the same

Soft locked my Android TV?

So...
I was dumb enough to play with the developer options hoping to find an option to deactivate adaptive screen resolution. instead i clicked on something and now my tv is kinda soft locked. at first it was stuck in a boot loop, eventually went into recovery mode here and there (see attachment, maybe there are some informations that could help solving the problem) , but i couldn't select/press anything bc this tv only has a power button. Later i found out you can use an USB keyboard to select stuff in recovery mode. So i grabbed my keyboard and waited for the RM screen. but it wouldn't show up. idk why but now its booting "normally", even shows the android logo. but then its just black. eventually the TV turns off and then back on, over and over. i tried every button combination I could find on the whole internet. Nothing seemed to work. One combination got me some hope but that hope disappeared quickly: i unplugged the TV, held the powerbutton, plugged the TV back in, still holding the power button, and waited.
after a short time it showed me a monitor looking like symbol with a gear icon on it and the gear was crossed with a red X. under it it was saying "error". (see attachment) ("Fehler" means "error" it's german)
so here i am. idk how i get it back into recovery mode so i can try that keyboard method.
and since i got that TV from my gramps, I don't have much information about it either. just got the TV and the remote from him.
I just know that it's the TCL 43EP640 respectively 43EP640X1. (Theres a sticker on the back of the TV, see attachment) so yea. I've heard you can update the firmware/software using an USB stick but idk how and i couldn't find any firm-/software for this TV
If you've read to this point and have an answer to my problem: I Love you
Need to flash with any IMG software (firmware) file....
Latest.....
Android 9....V662
Android 11...V715
Search in this thread...
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
stasiof said:
Need to flash with any IMG software (firmware) file....
Latest.....
Android 9....V662
Android 11...V715
Search in this thread...
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
Click to expand...
Click to collapse
i truly have no clue how to do any of these. could you help me out? explain to me like I'm 5
prixtn said:
i truly have no clue how to do any of these. could you help me out? explain to me like I'm 5
Click to expand...
Click to collapse
Please, take time and read in forum I posted...thx.
Edit:
Sample for same thread......#3,725
You need to flash IMG file
stasiof said:
Please, take time and read in forum I posted...thx.
Edit:
Sample for same thread......#3,725
You need to flash IMG file
Click to expand...
Click to collapse
but where do i get the firmware files?
prixtn said:
but where do i get the firmware files?
Click to expand...
Click to collapse
In that thread, everything is there.
Use search function....type... V662 or V715 and you will found.

Categories

Resources