[ROM][dragon][UNOFFICIAL][crDroidAndroid-13.0][v9.4]

[ROM][dragon][UNOFFICIAL][crDroidAndroid-13.0][v9.4] - Pixel C Android Development

RESERVED

The last crDroid build for the next time ..
It's based on Lineage-17.1 - we use the same device/kernel/vendor sources for dragon.
Including March security updates and DragonParts app for WiFi country code.
Moved to androidfilehost.com now ..
crDroidAndroid-10.0-20200308-dragon-v6.4.zip
There will be no regular updates .. just some builds from time to time !
Cheers

followmsi said:
The last crDroid build for the next time ..
Click to expand...
Click to collapse
First of all, thank you so much for all your work man, I just saw that you not only maintain official LOS for dragon and this crDroid port but also commit to official TWRP. I don't know how you do all this, but I admire and applaud it.
Two quick questions:
1. GApps are optional, right?
2. Do I flash Magisk after first boot (as described in OP under "Pre-Installation") or right after ROM (as described in OP under "First time installation")?
Edit:
Ok, I just couldn't wait and flashed it. To answer my own questions:
GApps are indeed optional and I flashed Magisk only after booting crDroid for the first time.
@ followmsi
So far I encountered the following problems:
1. A lot of artifacts/flickering/flashing of the UI, looks like refreshes/repaints that get stuck half-way. Sometimes it is impossible to e.g. use the keyboard because of this. If you want I can provide photos, but it should be pretty easy and obvious to reproduce this unless there is something seriously wrong with my installation.
2. Booting into crDroid only works every other time or so, it often freezes on the large Google logo screen. Holding the power button until it shuts off mostly fixes the problem and it boots successfully on the next try, but sometimes even a third try is needed.
Apart from these problems, first impression is very good. Nice to see Android 10 with lots of customization on the good old dragon
Thanks again and let me know if I can be of assistance.

One more build ..
crDroidAndroid-10.0-20200424-dragon-v6.5.zip
Changes:
- Google security updates -> April 2020 (android-10.0.0_r33)
- Turned off SoftAP MAC randomization
- Reverted Kernel MAC address hack -> to prevent boot problems.
- Changed kernel config for USB tethering
- Kernel: Added "fix cpu frequency limitation"
- Latest crDroid changes for Android 10
Enjoy

When using Colour calibration in LiveDisplay, the screen will flicker abnormally

followmsi said:
One more build ..
crDroidAndroid-10.0-20200424-dragon-v6.5.zip
Changes:
- Google security updates -> April 2020 (android-10.0.0_r33)
- Turned off SoftAP MAC randomization
- Reverted Kernel MAC address hack -> to prevent boot problems.
- Changed kernel config for USB tethering
- Kernel: Added "fix cpu frequency limitation"
- Latest crDroid changes for Android 10
Enjoy
Click to expand...
Click to collapse
I've been using this since your first test build. One of the better roms out there.
Considering your lack of time with your busy schedule, I really appreciate it!
Thanks! ??

122877087 said:
When using Colour calibration in LiveDisplay, the screen will flicker abnormally
Click to expand...
Click to collapse
Works normally for me.

A few months later ..
crDroidAndroid-10.0-20200811-dragon-v6.9.zip
Changes:
- Google security updates -> August 2020 (android-10.0.0_r41)
- Latest device and kernel changes for dragon.
- Latest crDroid changes for Android 10
Enjoy

followmsi said:
A few months later ..
crDroidAndroid-10.0-20200811-dragon-v6.9.zip
Changes:
- Google security updates -> August 2020 (android-10.0.0_r41)
- Latest device and kernel changes for dragon.
- Latest crDroid changes for Android 10
Enjoy
Click to expand...
Click to collapse
I know you're quite busy and I expect nothing, so I really appreciate this!
Thank you! ??
Edit: Just an FYi, a dirty flash from CR 6.5 to 6.9 was buggy. Might need a clean flash.
Also, Magisk Canary didn't want to flash. Tried multiple methods. Not a big deal because Magisk betta worked just fine.
Everything is running well,
Thanks!

Let's move to Android 11 ..
crDroidAndroid-11.0-20201219-dragon-v7.1.zip
Changes:
- Initial Android 11 build for dragon device
- Google security updates -> December 2020
- Latest device changes for dragon
- Latest crDroid sources
Enjoy

Awesome, Thanks. Just upgraded from Dirty Unicorns. Flashed with Nik Gapps, no problem except prior mentions in the LOS thread. Thank you a gain and have a great holiday!

First of all, thank you for all your work . I have flashed crDroidAndroid-11.0-20201219-dragon-v7.1.zip and Nik gapps. After the display has switched itself off, it switches on again automatically after 5 seconds and so on. If I turn the display off using the button, it won't turn on again. Do I have any setting that causes this?

It's time for a new build ..
crDroidAndroid-11.0-20210414-dragon-v7.5.zip
Changes:
- Google Security updates -> April 2021
- Latest device and kernel changes for dragon
- Backport of Wifi-Display (Miracast) for Android 11
- Latest crDroid changes for Android 11
Enjoy

Thank you @followmsi for your support of this ROM, as I much prefer it with all it's customization over basic LineageOS. It seems to run much better now than before as well. I think there were some RAM-related issues.
But I have run into a grave problem, as I have accidentally turned off WiFi and now the tablet has become unresponsive, as the UI seems to crash repeatedly. Only the status bar and lock screen symbol pop in and out. I tried to turn on WiFi by booting into TWRP and changing "wifi_on" to 1 in "/data/system/users/0/settings_global.xml" but it didn't work. The tablet runs warm and safe mode doesn't work either btw. Any idea?
Edit: I decided to perform a clean install, since it's been a while anyway and we've skipped a couple versions as well. Anyway, I initially tested to turn WiFi off and it worked fine, no crash. I proceed to set up my device somewhat, enable dark mode, change icon shape, go through all crDroid settings etc.; I turn off WiFi once more, from the quick-settings, and it happened again. I'm not sure what setting or customization exactly leads to this, but I guess I'll have to be very careful not to turn it off for now. If I can help troubleshoot this issue, let me know.
Edit2: I think I figured out what it is: Data usage (daily/monthly) in the quick settings. Gotta keep that turned off.

followmsi said:
It's time for a new build ..
crDroidAndroid-11.0-20210414-dragon-v7.5.zip
Changes:
- Google Security updates -> April 2021
- Latest device and kernel changes for dragon
- Backport of Wifi-Display (Miracast) for Android 11
- Latest crDroid changes for Android 11
Enjoy
Click to expand...
Click to collapse
Finally got around to flashing my beloved dragon again today, looking really good! No bugs or glitches so far, just a lot of customizable awesomeness
Once again thank you so much for your ongoing support for this ageing tablet, I would love to send the equivalent of a few coffees or beers yours way if you tell me how.

It's time for a new build ..
crDroidAndroid-11.0-20210810-dragon-v7.9.zip
Changes:
- Google Security updates -> August 2021
- Latest device and kernel changes for dragon
- Backport of Wifi-Display (Miracast) for Android 11
- Latest crDroid changes for Android 11
Enjoy

Maybe it is good chosen one

followmsi said:
It's time for a new build ..
crDroidAndroid-11.0-20210810-dragon-v7.9.zip
Changes:
- Google Security updates -> August 2021
- Latest device and kernel changes for dragon
- Backport of Wifi-Display (Miracast) for Android 11
- Latest crDroid changes for Android 11
Enjoy
Click to expand...
Click to collapse
As always, thank you so much for your ongoing support for the good old dragon!
Just a note in case anyone else stumbles upon this: I could not get this build to boot with OpenGapps and a clean install, tried three times including format data and everything. Then tried NikGapps and it worked like a charm.
ROM itself is awesome, no problems so far, reasonably fast considering the hardware and a lot of cool features.

This is my last crDroid build for Android 11 .. the next build will be based on 12.
crDroidAndroid-11.0-20211214-dragon-v7.13.zip
Changes:
- Google Security updates -> December 2021
- Latest device and kernel changes for dragon
- Latest crDroid changes for Android 11
Enjoy

Related

[ROM][UNOFFICIAL][PIE] LineageOS 16.0 for Wileyfox Swift 2/Plus/X

Nice job! I was following this @ 4pda since day one.

There is a serious issue with the last 2 builds on the swift 2x. The screen keeps going off and the device locks itself . Not sure what the problem is. The first build doesnt have that issue tho.
logs:
https://drive.google.com/file/d/1A1KZ7ZktqdSpS-yEsrKOKP6xMvBjRMVh/view?usp=sharing
https://drive.google.com/file/d/1Ateb7-r1hFYzzEl1NgufnnhHzbZVk5EM/view?usp=sharing

Abdullah S.A. said:
There is a serious issue with the last 2 builds on the swift 2x. The screen keeps going off and the device locks itself . Not sure what the problem is. The first build doesnt have that issue tho.
logs:
https://drive.google.com/file/d/1A1KZ7ZktqdSpS-yEsrKOKP6xMvBjRMVh/view?usp=sharing
https://drive.google.com/file/d/1Ateb7-r1hFYzzEl1NgufnnhHzbZVk5EM/view?usp=sharing
Click to expand...
Click to collapse
Finnaly have a time to check it.
And what can i say: you using Treble kernel and treble repartition. Its not bad, but LOS kernel have a huge part of updates and highly recommended to useage
[ 0.000000] Linux version 3.18.71-treble ([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Sep 28 18:40:23 +03 2018
Click to expand...
Click to collapse
I cant help you or debug it, untill you using not standart kernel supplied with LOS16.
UPD: yeah, seems like its ROM bug, sorry for misunderstanding. Working on it.

nikith290 said:
Finnaly have a time to check it.
And what can i say: you using Treble kernel and treble repartition. Its not bad, but LOS kernel have a huge part of updates and highly recommended to useage
I cant help you or debug it, untill you using not standart kernel supplied with LOS16.
UPD: yeah, seems like its ROM bug, sorry for misunderstanding. Working on it.
Click to expand...
Click to collapse
Thank you for you work. I just tried the new update (the one with OTA) and the problem is solved. That ROM is really stable. I am facing the same bugs you mentioned in OP so nothing unusual. Waiting for the fixes.
Keep up the great work!

Thanks for supporting Swift 2 @nikith290 ...currently on crDroid Oreo but will definitely try this out ..hoping you find the time to fix screen bug meantime ..:good:
Do you take donations for a beer or coffee via PayPal ?

KevMetal said:
Thanks for supporting Swift 2 @nikith290 ...currently on crDroid Oreo but will definitely try this out ..hoping you find the time to fix screen bug meantime ..:good:
Do you take donations for a beer or coffee via PayPal ?
Click to expand...
Click to collapse
Screen already fixed with RIL data. Several new builds can be downloaded from Gdrive folder =D I just don't give any announcements before camera will be fixed.
Coffee, but not now. Many thanks!

My builds: https://vasy.ru/LineageOS-16/marmite/
What's working:
- Boots
- RIL (Calls, SMS, Data)
- NFC
- Wi-Fi
- Bluetooth
- Audio
- Sensors
- LED
- GPS
- Fingerprint
- Camera
- Camcorder
- Video Playback
- Flash
- FM radio
What's NOT working:
- SELinux Permissive
Changelog
20190413
- fix FM radio
- fix LiveDisplay
- upstream updates
20190407
- fix FP in apps
- fix GPS crash
- add WiFi display(miracast)(need testing)
- upstream updates
20190324
- You are welcome! (first public release)
All source's also on DevelopedInside github

Wow that was quick.
Just tested the new release
Bugs:
- Fingerprint not working with 3d party apps like banking apps (Probably because of SeLinux?)
-Sometimes I got a message of 'Process System is not responding'. Not a big deal tho.
-Casting to a wireless display is not working ( It causes a system UI crash)
-Two camera apps, the lineage os one and the AOSP one.
-FM radio not working
Note: these are the same bugs that I face with gsi ROMs (except for the two cameras and process system)
Everything else (which means almost everything) is working fine. Great job guys!

would you guys say this rom is at a state where i can use it as a daily driver?
also thanks for the hard work in making this

yamileon said:
would you guys say this rom is at a state where i can use it as a daily driver?
also thanks for the hard work in making this
Click to expand...
Click to collapse
It's fine as a daily driver as long as you don't use FM radio. I am using it right now, it is very stable and it offers better battery life than project treble GSIs do.
Also I'd like to report that LiveDisplay isn't working for me on the Swift 2 Plus

Update!
~~~08.04.2019~~~
- LineageOS Upstream
- April Security Path
- Fixed "System Error" message
- Fixed Fingerprint Authentication in 3rd party apps
- Added Qualcomm's WI-FI Display implementation (needs check, my miracast dead)
- Removed AOSP Camera
Download: https://drive.google.com/drive/folders/1p47DeslJmlmuxURwPjJKxiizt3aTvcYP

https://vasy.ru/LineageOS-16/marmite/
20190407
- fix FP in apps
- fix GPS crash
- add WiFi display(miracast)(need testing)
- upstream updates

vm03 said:
https://vasy.ru/LineageOS-16/marmite/
20190407
- fix FP in apps
- fix GPS crash
- add WiFi display(miracast)(need testing)
- upstream updates
Click to expand...
Click to collapse
Is this a different build than the one Nikith90 provided?

Two questions:
1. Is there any simpler and less intrusive ways to get root than Magisk? SuperSU is not an option.
2. When can we foresee a working webview?
Other than that, great work! Very stable and smooth indeed!

Abdullah S.A. said:
Is this a different build than the one Nikith90 provided?
Click to expand...
Click to collapse
No.
We just forgot to ask each other about who gonna release next build

beamscotty said:
Two questions:
1. Is there any simpler and less intrusive ways to get root than Magisk? SuperSU is not an option.
2. When can we foresee a working webview?
Other than that, great work! Very stable and smooth indeed!
Click to expand...
Click to collapse
1. You can download LineageOS SU manager from https://download.lineageos.org/extras (arm64, LOS16)
2. Hm... Its already provided by Chomium-Based Webweiw included in LOS source code, as i know... Can you provide a little more info?

For 1. Great. Thanks. I wan't sure if the standard add on would work.
For 2. I noticed today after upgrading to this version from CRdroid 8.1 (I did a dirty flash of the OS and GAPPS 9, not noticed any other problems so far) when you get the prompt to connect to a WiFi hotspot which requires you to accept terms (in webview) I only get a blank page. I am using Opera as my browser, but it shouldn't be related.
Other suggestions: Can one have the battery icon as a circle? That, and automatic log on when correct PIN is entered would be nice. I miss those features (and a few others) from CRdroid.

beamscotty said:
For 1. Great. Thanks. I wan't sure if the standard add on would work.
For 2. I noticed today after upgrading to this version from CRdroid 8.1 (I did a dirty flash of the OS and GAPPS 9, not noticed any other problems so far) when you get the prompt to connect to a WiFi hotspot which requires you to accept terms (in webview) I only get a blank page. I am using Opera as my browser, but it shouldn't be related.
Other suggestions: Can one have the battery icon as a circle? That, and automatic log on when correct PIN is entered would be nice. I miss those features (and a few others) from CRdroid.
Click to expand...
Click to collapse
1. I will try to check webwiew bug later, now im using mini gapps with Chrome Webwiew
2. LOS not providing that type of features anymore.
Wait for CrDroid PIE builds

anyone able to use faceunlock ? using pico gapps no option for face unlock in smart unlock settings ...if i install trusted face apk from apk mirror settings appear as expected and setup launches but crashes before finishing setup
*should i :
1. install stock gapps package
2. put trusted face apk ..in /system/priv-app/
3. or is there a flashable patch zip
4. or another version of trusted face ( using version 9 latest from apk mirror)
5. or something else
6. or it's broken and take logs ...

[ROM][Signature Spoofing]LineageOS 18.1 for S10E/S10/S10+ Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 for Galaxy S10 Series
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- GPS
- Cameras (All of them)
- HWcomposer (HWC)
- Signal indicator
- Double tap to wake
- Wireless PowerShare
Not Working
- VoLTE and VoWiFi will not be implemented (for now) as they heavily depand on samsungs framework
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat
b) /proc/last_kmsg (or /proc/kmsg)
c) /data/tombstones
d) dmesg
Please do not report bugs if you have performed any system modifications excluding gapps installation
Installation instructions
Make sure you are on Q stock firmware (All of the Q firmwares are tested and confirmed to be working, This should be the case with new fws too as long as Samsung doesnt significantly change bootloader trustzone bits)
Download Q twrp from this thread
flash twrp as per given instructions
if you are coming from stock and have encryption enabled format data (Note i said format, Wiping it in twrp is not the same as formating it)
wipe cache, dalvik cache and system
flash LineageOS
If you want to have gapps flash them right after flashing the rom before first booting
Reboot the device
Downloads:
Google Drive
Mega.nz
(Select build coresponding to your devices codename, S10e = beyond0lte | s10 = beyond1lte | s10+ = beyond2lte)
sha256 checksums
Code:
c8b961734a7972e9db9110785ba622d48c65a3c8ada9c611165864b0411f6699 lineage-18.1-20211111-UNOFFICIAL-beyond2lte.zip
fea1d76cb049cf3d83b9863da19dd0c46b70f91cec7c2a820915adb8943a671c lineage-18.1-20211111-UNOFFICIAL-beyond1lte.zip
540c111583147e94076959fdf3ff51c3f8fc2f29ec98949c6a105d936882f8ce lineage-18.1-20211111-UNOFFICIAL-beyond0lte.zip
If you need general help or questions feel free to join Telegram group
READ BEFORE INSTALLING MAGISK
Gapps
I do this in my free time so bear that in mind when you notice I didn't fix known bug in next available build, Currently i work on this alone and i am not one of those kangers that just copy source and claim it as their own work,
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
Due to requests from some users I added signature spoofing support to the rom which allows usage of MicroG
you can simply install MinMicroG and grant it needed permissions for signature spoofing to make it work as intended
Based On Android R
Changelog
12.11.2021.
- Merged November 2021. security update
- Further Improved bluetooth in call handling
- Added more advanced burn in protection
- Misc performance and stability improvements
- Synced with LOS source
06.10.2021.
- Merged October 2021. security update
- Improved bluetooth in call handling
- Synced with LOS source
10.09.2021.
- Merged September 2021. Security update
- Synced with LOS source
06.08.2021.
- Merged August 2021. Security update
- Synced with LOS source
10.07.2021.
- Merged July 2021. Security update
- Performance and stability improvements
- Changed sensors handling in doze mode to prevent battery drain
- Synced with LOS source
10.06.2021.
- Merged June 2021. Security update
- Synced with LOS source
06.05.2021.
- Added wifi and portable hotspot overlays
- Merged May 2021. Security update
- Synced with LOS source
08.04.2021.
- Fixed USB C audio input/output
- Fixed charging with device powered off (It also has nice new animation now)
- Merged April 2021. Security update
- Misc performance and stability improvements
- Synced with LOS source
08.03.2021.
- Added signature spoofing support
- Synced with LOS source
05.03.2021.
- Merged March 2021. Security update
- Performance and stability improvements
- Synced with LOS source
06.02.2021.
- Merged February 2021. Security update
- Misc performance and stability improvements
- Modernized AdvancedDisplay app codebase
- Cleaned up the source
- Updated magisk boot images
- Synced with LOS source
06.01.2021.
- Merged January 2021. Security update
- Fixed OpenGapps installation from lineage recovery
- Fixed features that broke with initial 18.1 merge
- Misc performance and stability improvements
- Synced with LOS source
09.12.2020.
- Merged December 2020. security update
- Merged December 2020 feature drop
- Merged S9DTK9 vendor blobs
- Switched to full vndk30 vendor
- Fixed ADB inside of lineage recovery
- Improved brightness handling even more
- Performance and stability improvements
- Updated recovery images provided in 3rd post
- Synced with LOS source
10.11.2020.
- Further improved auto brightness handling
- Merged November 2020. security update
- Performance and stability improvements
- Updated recovery images provided in 3rd post
- Synced with LOS source
03.11.2020.
- Fixed issues with overlays and s10 camera cutout
- Enabled access to fingerprint for apps that were looking for secure biometics device (e.g. paypal)
- Improved automatic brightness handling (Switched to calibrated sensor virtual device which calculates brightness more precisely)
- Pinned SystsemUI and SurfaceFlinger to ram to imrpove responsivness
- Added blur to dropdrown notifications panel
- Enabled device controls from power menu
- Synced with LOS source
- Misc performance improvements
22.10.2020.
- Merged october security update
- Added back mDNIe display tuning options
- Added back a lot of previously non working los features
- Misc performance and stability improvements
- Synced with los source
07.10.2020.
- Initial public release
XDA:DevDB Information
[ROM] LineageOS 18.0 for S10E/S10/S10+ Exynos , ROM for the Samsung Galaxy S10
Contributors
Ivan_Meler
Source Code: https://github.com/ivanmeler/android_kernel_samsung_beyondlte/tree/lineage-18.0
ROM OS Version: 11.0
Version Information
Status: Stable
Created 2020-10-07

Reserved

Magisk
Magisk boot images are provided in this google drive folder named beyond*lte-boot-magisk.img you can flash them on boot slot and install magisk manager, No need to worry about rebooting to recovery or not having TWRP and magisk at the same time, Just make sure you dont try to boot to system with magisk patched TWRP as that might cause issues but as long as you have stock twrp and have flashed beyond*lte-boot-magisk.img image to boot slot you are fine, Source for given kernel is available at GitHub if you want to compile kernel yourself just run source build.sh devicename e.g. source build.sh beyond2lte, It will produce new boot image in build/ folder, To update magisk you can follow instructions given at this commit enjoy
Do note that you will have to reflash magisk boot image when updating rom

Wow ! Man, very nice job !
So, you stop release for Lineage 17 ?

troufiniou said:
Wow ! Man, very nice job !
So, you stop release for Lineage 17 ?
Click to expand...
Click to collapse
Nah will update that too, Just felt like releasing this because i had some time to sort out issues with it

The version of gapps doesnt matter even if this is android R right?
I can still flash android 10.0 gapps right?

Eidluci said:
The version of gapps doesnt matter even if this is android R right?
I can still flash android 10.0 gapps right?
Click to expand...
Click to collapse
there is link for android 11 gapps in first post under download section

Ivan_Meler said:
there is link for android 11 gapps in first post under download section
Click to expand...
Click to collapse
Oh thank you, my bad

Hi @Ivan_Meler i'm looking to change rom (i'm on hades rom but this one is not support anymore). And i just want to know if i need a custom kernel to improve battery life on LoS rom (this one or 17.1)?
Thanks for your precisions and your work to maintain on devices uptodate !

[Legenda] said:
Hi @Ivan_Meler i'm looking to change rom (i'm on hades rom but this one is not support anymore). And i just want to know if i need a custom kernel to improve battery life on LoS rom (this one or 17.1)?
Thanks for your precisions and your work to maintain on devices uptodate !
Click to expand...
Click to collapse
Battery life should be fine with stock kernel too as most of things are improved power hal side of things

Ivan_Meler said:
Battery life should be fine with stock kernel too as most of things are improved power hal side of things
Click to expand...
Click to collapse
Great. Thanks. I'll go on 17.1 LoS for awhile and will install this one when it will be more "polish".

Hi I don't know why but on previous lineage os ROMs, when I use TWRP and boot.img it would always boot back to recovery everytime I flashed a ROM.

Can you use lineage recovery to flash ROMs?

Ivan_Meler said:
If you want to root build you will have to use Magisk Canary from here, Once in app download Lineage Recovery for your device from Google Drive or Mega Patch image within manager and flash patched image to recovery partition, When booting hold recovery key combination till you get to first warning screen after that release keys and let system continue booting normally
Magisk curently has some issues properly detecting 2si devices so thats why we cant use boot.img without need for key combo for magisk right now, I will look into that in coming days but till then this is viable solution
Click to expand...
Click to collapse
Tried but says magisk still isn't installed please help.

Il be installing it soon to test it, very hype for android 11

FreeRunner2017 said:
Tried but says magisk still isn't installed please help.
Click to expand...
Click to collapse
make sure you followed instructions closely
1. Download recovery image
2. Download magisk canary app and patch recovery image
3. Flash magisk patched recovwry image (lineage recovery) to recovery partition
4. reboot and hold key combination for recovery until first warning screen shows up, after that release key combo
5. you should be in system with root
if you need further assistance im sure someone from telegram group can help you a bit more

Ivan_Meler said:
make sure you followed instructions closely
1. Download recovery image
2. Download magisk canary app and patch recovery image
3. Flash magisk patched recovwry image (lineage recovery) to recovery partition
4. reboot and hold key combination for recovery until first warning screen shows up, after that release key combo
5. you should be in system with root
if you need further assistance im sure someone from telegram group can help you a bit more
Click to expand...
Click to collapse
I did that but I still have no magisk

SD cards on the s10e just dont work, they keep saying its corrupted even after you format them in android itself ive also tried formatting in windows and twrp but same problem.
network traffic indicator can be turned on but never actualy shows up.
after installing magisk it takes apps 20 seconds to open.
if you need logs i will be happy to do so (if i can remember how to do so)

Wow, already an android 11 ROM ? Nice !
Is there the same issues as on L17 regarding bluetooth and front camera ?

Hi Ivan
Thanks for the great work! Awesome to have Android R available so early. Rom is solid.
On S10e i can confirm, it does not read MMC, i also tried formatting etc, not a biggy
On Bluetooth i can confirm that devices working, headphone sound, speakers etc. But on call when phoning, the sound does not come over to the headset.
HDMI Out is glitchy, creates flickering on secondary display, but is random....
Other than that, the rom is smooth and fast. Still checking battery...
Looking forward to developments...

[ROM] LineageOS 17/18/19 UNOFFICIAL - (Update: 2023-06-17)

LineageOS 17/18/19 for Sony Xperia XZ1 Compact
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1 Compact.
Creating this to honor the great work of modpunk and derf elot from https://forum.xda-developers.com/t/rom-lineageos-18-1-unofficial-2-0-update-2021-01-20.4047763/ which seems to be discontinued. Posting an own thread to keep the latest versions visible, I'm NOT claiming authorship over the ROM.
I basically just build the ROM using the latest changes from upstream LineageOS/Google and kernel updates (usually incorporated by derf elot ) See my post.
FEATURES
Signed with dev keys
EAS kernel
Passes SafetyNet out of the box (thanks Rooted_Ansh, Havoc-OS Team and kdrag0n)
Seedvault (Video)
IMS support (thanks to Rooted_Ansh and also Shujath)
17.1 has stock Sony camera (not possible on 18+)
DOWNLOAD
You can download the latest release here.
HINT: Download both the ZIP and md5sum file so TWRP can check the consistency of the upload/download.
Make sure you download the right version, vanilla LineageOS is named lineage-*UNOFFICIAL-lilac.zip while the MicroG version is named lineage-*-MICROG--lilac.zip
REQUIRED FIRMWARE: 47.2.A.11.228
IMPORTANT: I only test the 17.1 releases myself. The 18.1/19.1 are build from mostly the same sources and hopefully work. I only test them roughly.
Backup download
INSTALLATION
IMPORTANT: Magisk seems to cause issues (bootloops) on update, so remove it first and reinstall if required. Note that Magisk is usually not required unless you want root.
Put the zip file of the ROM on your SD card or internal store and boot into recovery.
When coming from stock ROM, do a full wipe (i.e. factory reset) via "Wipe". You don't need to wipe system. When flashing the stock ROM you can select to not keep user data which is equivalent to this step.
Go to "Install", select the zip file and add optionally the gapps zip. Then flash it.
After updates you may now wipe cache&dalvik (option after install)
I suggest to use modpunks TWRP recovery. Again: Don't forget the md5sum file!
TWRP 3.3.1-0 by modpunk / derf elot
Or use the latest TWRP for 17.1/18.1 or TWRP for 19.1.
3.7.0 Seems to work well with latest updates (decryption working) but LineageOS 19.1 (Android 12) requires the ones with "_12" suffix, e.g. 3.6.2_12.
For ease of use I suggest to flash this recovery (only required once):
Boot in Fastboot mode: Hold "Volume Up" while connecting the USB cable to phone and PC
Flash TWRP by running this on the PC: fastboot flash recovery twrp-3.3.1-0-lilac-android10-1.img
(adjust the filename if necessary)
From now you can boot TWRP by turning on the phone with "Volume Down" + Power
I heavily recommend to make a full backup before any installation so you can go back in case of issues. Flashing an older ROM usually helps to recover bootloops etc.
Upgrades between versionsDirty-flashing (e.g. from 17.1 to 18.1) works well but you have to also flash a GApps version matching the Android version or the device will bootloop.
For the upgrade to 19.1 you may need to fully remove OpenGapps by wiping /system and install e.g. MindTheGapps.
SUPPORT
There is NONE. If you have any issues or question ask in the thread so maybe someone else knows the answer.
I'm just providing the ROM (Lineage 17.1 variant) I use myself for others to try to and just build the Lineage 18.1 ROM without much testing.
If you prefer to use a more well-tested Android 11 ROM, I suggest to look at Havoc-OS.
Contributions to the sources are welcome and likely get integrated into the next release.
Contributors
modpunk, derf elot, Rooted_Ansh, Flamefire, linckandrea
Source Code: https://github.com/Flamefire/android_device_sony_lilac, Original: https://github.com/whatawurst/
If you want to buy me a coffee/beer, I'll appreciate it but it is not necessary.
Also please consider donating to the original authors too or to local charities as requested by @modpunk
Special thanks to landsome for donating a test phone for bug hunting and development.
ROM OS Version: Android 10/11/12
ROM Kernel: Linux 4.4.x
Based On: LineageOS
GApps: None included, except for the MICROG builds. Recommended is OpenGApps for 17/18 and MindTheGapps for 19.

CHANGELOG
2023-06-16
June security patches (backports from 18.1 to 17.1)
Kernel updates (CIP tag -st41)
Fix noise when calling with a headset
Configurable fingerprint sensor when screen is off (Settings->Lockscreen)
2023-05-19
Fix Play Integrity checks --> Google Wallet works
Minor improvements that were missed earlier
May security patches (backports from 18.1 to 17.1)
Kernel updates (CIP tag -st40)
2023-04-30
April security patches (backports from 18.1 to 17.1)
Kernel updates (CIP tag -st39)
2023-03-31
March security patches (backports from 18.1 to 17.1)
Kernel updates (CIP tag -st38)
Fix possible camera issues on 18.1
2023-02-25
February security patches
Kernel updates (e.g. CIP tag -st37, also add some missing patches to 19.1 kernel)
Use newer compiler (Clang 12.0.7) for kernel, possibly improving performance/battery life
Add "Re-apply Modem" setting to XperiaParts to help with connection/modem-crash issues
Clear some space on /system & /vendor partitions by removing files no longer needed
Attempt to fix Android Auto connection (untested)
2023-01-20
January security patches
Kernel updates
MicroG builds added (build date 31st Jan, but same sources)
2022-12-27
December security patches
AGPS fix (using Google servers)
Kernel updates (e.g. Wireguard v1.0.20220627, improved security against stack attacks)
2022-11-15
November security patches
WLAN driver update
Huge APN update
2022-10-13
October security patches
Kernel update
APN for DIGI HU
Option to switch temporarily to 2G on boot
2022-09-29
September security patches
Kernel update
APN update
2022-08-12
August security patches
Kernel update (CIP st20)
2022-07-25/28
July security patches
Kernel update
2022-06-30
June security patches
Kernel update
Backport fix for CVE-2021-39686
Workaround fixing bootloop with recent OpenGapps (20220503 tested)
2022-05-16
May security patches
Fix mic volume issue with wired headsets
Known issue: OpenGapps after 15/2 result in bootloop
2022-05-03
April security patches
Kernel update (CIP st5-tag)
Removed LineageOS updater (unused application here)
Added Sony identification packages (Compatibility for some Sony apps from other sources)
2022-03-20
March security patches
Updated some carrier configs (mostly Indian&Chinese) for IMS (VoLTE...)
Better support for flip covers
Allow disabling battery optimizations for the SMS app
2022-02-20
February security patches
Kernel 4.4.302 (final LTS kernel)
Re-enable VoLTE toggle switch (there were reports of modem crashes when VoLTE is disabled, can't reproduce this, hence added the setting back)
2022-01-23
January security patches
Kernel 4.4.299
Wireguard v1.0.20211208
Enhanced display brightness range
Experimental Ultra-Dim mode
2021-12-19
December security patches
Kernel 4.4.295
QCom driver updates
Fix some permission issues
Reset phone ID to XZ1C
2021-11-29
November security patches
Kernel 4.4.291
Fix IMS on 17.1
Fix/enhance Wifi-Display
Fix some power hints
Update APNs
2021-10-19
October security patches
Kernel 4.4.288
2021-09-18
September security patches
Include some more security patches from AOSP
Clang 11 for LOS 17.1 version (same as 18.1, improved optimizations)
Misc bugfixes backported from Android 11 to Android 10
Kernel 4.4.283
2021-08-11
August security patches
Fix bug with switch 3G->4G in XperiaParts not working on slow boot
Include some more security patches from AOSP
Kernel 4.4.279
2021-07-20
July security patches
Kernel 4.4.275
2021-07-03
June security patches
Update to Linux Kernel 4.4.272
Updated APNs

reserved2

Thank you for keeping this rom up to date for this small but loyal userbase! A miracle come true for me cause I can't build roms on my own.

Thank you so much!! Can anyone report to me if flashing the new 18.1 directly over the previous version of 18.1 works?
I would test myself, but right now I cant afford to need to totally reset my phone if it doesn't work.

Dean F said:
Thank you so much!! Can anyone report to me if flashing the new 18.1 directly over the previous version of 18.1 works?
I would test myself, but right now I cant afford to need to totally reset my phone if it doesn't work.
Click to expand...
Click to collapse
All I can say dirty flashing works well over the latest/previous 17.1 by Flamefire, which in turn works well over the latest modpunk (1.7). So it's worth a try.
More generally, although these ROMs are hardly as well tested as HavocOS, there are satisfied reports over on the original LOS17.1/18.1 thread.

Dean F said:
Thank you so much!! Can anyone report to me if flashing the new 18.1 directly over the previous version of 18.1 works?
I would test myself, but right now I cant afford to need to totally reset my phone if it doesn't work.
Click to expand...
Click to collapse
Dirty flash from 17.1 to 18.1 and all work fine!

rez78 said:
Dirty flash from 17.1 to 18.1 and all work fine!
Click to expand...
Click to collapse
Exactly. Just not the other way around.

Updated with the July security patches.
Note: AndroidFileHost was quite quirky today, so use the md5sum files to verify the integrity of the files

Dirty flash. Work perfect!

Flamefire said:
Updated with the July security patches.
Note: AndroidFileHost was quite quirky today, so use the md5sum files to verify the integrity of the files
Click to expand...
Click to collapse
Thanks. Tried it for a couple of hours - dirty flashed over the 0702 version - and it works just as well so far.
I had one brief moment of panic: upon first boot the phone was stuck right on hitting the desktop for some 10 seconds (did not happen on the many previous dirty flashes); but then everything proceeded well.
Again, great work.

@Flamefire Regarding the information to TWRP: There is an official TWRP version (maintained by @modpunk & @derf elot ): https://twrp.me/sony/sonyxperiaxz1compact.html
Maybe you can update the information in your header.

banana(x) said:
@Flamefire Regarding the information to TWRP: There is an official TWRP version (maintained by @modpunk & @derf elot ): https://twrp.me/sony/sonyxperiaxz1compact.html
Maybe you can update the information in your header.
Click to expand...
Click to collapse
Your suggestion would be valuable if you share your experience:
- encrypted partition mount and decryption compatibility with LineageOS 17.1/18.1
- partition backup / restore - single / batch - with / without password protection
- other version differential bug report

Im running 18.1 ROM now and its working great. It works so much better than the previous January release, because the network connects properly now after restarting. There is no need to fiddle in the settings to switch to 3G, then switch back to 4G.
I really like it.

Ok, I was bored and I made a mess, I could use some help.
I was on the latest and last 17.1 by modpunk. I updated TWRP to the latest official one. I tried to flash the latest 18.1 by Flamefire (I had to disable zip signature verification. I know ). Upon reboot it spends about a minute on the LOS animated logo then reboots to TWRP. I then downgraded TWRP to the latest by modpunk and flashed his latest 18.1 from January. This bootloops to recovery without ever reaching the LOS logo.
I know this is my fault. This said, what's my best chance (if any) not to have to wipe everything? I read in a post above that downgrading from 18.1 to 17.1 won't work, otherwise that would be my next idea.
Thanks in advance to anyone replying!
EDIT: Silly me. I had just forgotten to flash 11.0 gApps. All is well with the dirtiest flash ever.

It was not possible to boot LOS 17.1 with TWRP version from first post. (fresh flash, etc... ) However when using latest official twrp https://twrp.me/sony/sonyxperiaxz1compact.html everything works well.

OUTSTANDING!
Thanks for bringing life to this amazing work, you are the best!
Much appreciated.

@Flamefire
Im confused so u continue with updating the security patches every month correct ?
Im confused about the 18.1 u also only update it with securitypatches or also other stuf like making stable and fixing problems orwhatnot ?
Thank you for keeping our trusty xz1 compact alive a little longer.

megaice said:
It was not possible to boot LOS 17.1 with TWRP version from first post. (fresh flash, etc... ) However when using latest official twrp https://twrp.me/sony/sonyxperiaxz1compact.html everything works well.
Click to expand...
Click to collapse
Does it respond to volume up button presses and in special system restart recovery mode? Prompts for a pin/pattern during login and successfully mount and decrypt the partition? So far no one else has reported using it and so far we knew 17.1 / 18.1 requires a different version. Your experience will help us a lot please share as much experience as possible about the new twrp.

7alvoo said:
Does it respond to volume up button presses and in special system restart recovery mode? Prompts for a pin/pattern during login and successfully mount and decrypt the partition? So far no one else has reported using it and so far we knew 17.1 / 18.1 requires a different version. Your experience will help us a lot please share as much experience as possible about the new twrp.
Click to expand...
Click to collapse
i forgot to mention - i'm using lineage-17.1-20210702-UNOFFICIAL-lilac.zip build (not the latest ..20210720..)
TWRP version 3.5.2_9.0
Magisk 20.4 -> 23
Entering recovery works well, pwr+vol down, vol up after pwr, or when set in Developer submenu - advanced reboot. I have active pin and fingerprint. When entering recovery, twrp asks for password for user 0, using my pin works and twrp decrypts FBE. i can mount and read user data by File Manager in twrp.

[ROM][UNOFFICIAL][13] d1/d2s/d2x crDroid 9.x [May 19 2023][OTA][Encryption]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
Install CrDroid recovery ( Download from here )
Magisk Delta 25.0 or newer for root (after first boot) - (Download from here)
Gapps included
Note:
This rom now supports any android 12 firmware.
Download the respective rom for your device (d2s, d2x, d1)
Format data (clears internal storage), wipe system, cache, dalvik/art cache
Copy and install the rom zip
Flash GApps
Reboot device and enjoy.
Update installation:
Go to updater in settings and check for updates and install new version, or sideload rom in crdroid recovery.
Android Version : 13
Security patch level: May 2023
Build author/Device Maintainer: FreeRunner2017
Rom Sources: https://github.com/crdroidandroid
Kernel: https://github.com/awakened1712/android_kernel_samsung_exynos9820
Device Trees: https://github.com/crDroid-982X
Credits:
CrDroid for sources
awakened1712 for kernel and device trees
Join us on our telegram group @expressluke9820 to report issuess or say hi, also check out my release channel @Freerunner4everupdates
Downloads:
D1
D2S
D2X
Updates:
changelog 05/18/2023
- May security patch
- Upstream kernel to 315
- Synced CrDroid sources
- Many miscellaneous improvements
changelog 04/29/2023
- April security patch
- Added Encryption by default
- Upstream kernel to 313
- Synced CrDroid sources
- Many miscellaneous improvements
01/04/2023
changelog
- March security patch
- Added dynamic encryption back
- Upstream kernel to 4.14.311
- Synced CrDroid sources
- Many miscellaneous improvements
- Removed gapps
- Fixed google restore
19/02/23
changelog
- february security patch
- charging info fixed
- removed dynamic encryption for now
- upstreamed kernel to 4.14.305
- Synced CrDroid sources
- Many miscellaneous improvements
14/01/23
changelog
- Add OTA support
- Synced CrDroid sources
11/01/2023
changelog
- Update crDroid version to 9.1
- January security patch
- Minor fixes
- Synced crDroid sources
06/01/2023
changelog:
- Synced CrDroid sources
- Minor fixes
24/12/2022
changelog
- WireGuard integrated into kernel.
- latest firmwares will now be supported for install.
- Vendor partition reverted back to EXT4 from EROFS.
- Dynamic Encryption based on recovery.
- F2FS filesystem support restored.
-Synced CrDroid sources
12/17/22
changelog:
-merged december update android-13.0.0_r16
-synced CrDroid sources
-many improvements
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
etc.....
Known issues:
Just volte
You tell me
Visit official website @ crDroid.net
crDroid <device> Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs

Nice, finally someone is doing this. Being both a fan of crDroid and Note 10 series, it's sad to see crdroid being no longer built, even just using trees from LOS.
Once thought about build these too, but it takes too much disk spaces to play with other devices and build these devices regularly at the same time...

Rocky7842 said:
Nice, finally someone is doing this. Being both a fan of crDroid and Note 10 series, it's sad to see crdroid being no longer built, even just using trees from LOS.
Once thought about build these too, but it takes too much disk spaces to play with other devices and build these devices regularly at the same time...
Click to expand...
Click to collapse
I will update builds next week again thanks.

Just found out Jubscleisson is doing the same thing. I believe they will make it official in the future which is also great.
Oh, and, um, I don't know if the original maintainer cares, but you should always put his name on the page, since he took sooooooooo much effort to build these trees, and deserve a respect.

May i know that it is for snapdragon devices or exynos?

yuvisant said:
May i know that it is for snapdragon devices or exynos?
Click to expand...
Click to collapse
exynos....i am releasing new builds today with december update.

Rocky7842 said:
Just found out Jubscleisson is doing the same thing. I believe they will make it official in the future which is also great.
Oh, and, um, I don't know if the original maintainer cares, but you should always put his name on the page, since he took sooooooooo much effort to build these trees, and deserve a respect.
Click to expand...
Click to collapse
i agree

New builds!
12/17/22
changelog:
-merged december update android-13.0.0_r16
-synced CrDroid sources
-many improvements

yuvisant said:
May i know that it is for snapdragon devices or exynos?
Click to expand...
Click to collapse
If you have a snapdragon device, GSI is your only choice for now.

new builds are up!
MERRY CHRISTMAS!
24/12/2022
changelog
- WireGuard integrated into kernel.
- latest firmwares will now be supported for install.
- Vendor partition reverted back to EXT4 from EROFS.
- Dynamic Encryption based on recovery.
- F2FS filesystem support restored.
-Synced CrDroid sources

Stay tuned for updates guys....

Hi nice work with that ROM, thanks to u i will stay longer with my note , it will be nicer if u give us additional info about how to "magisking" it, Only via patching boot.img or some other way.
Had also problems with gapps(minimal ver(core)) after first 3 boot-ups(Store Play doesnt want to work), probably smth with play service updating etc.., but now working perfectly
Ps. When i Shuting it down or rebooting via system gui, the screen is turing fast and the phone is turned on for 30secs more, newbie can think that is freeze or smth(Probably everyone will shut it down by force key combination)
D1 Ver on SM-N970F
Once more GJJ, Thank u.

AdmMST3R4H said:
Hi nice work with that ROM, thanks to u i will stay longer with my note , it will be nicer if u give us additional info about how to "magisking" it, Only via patching boot.img or some other way.
Had also problems with gapps(minimal ver(core)) after first 3 boot-ups(Store Play doesnt want to work), probably smth with play service updating etc.., but now working perfectly
Ps. When i Shuting it down or rebooting via system gui, the screen is turing fast and the phone is turned on for 30secs more, newbie can think that is freeze or smth(Probably everyone will shut it down by force key combination)
D1 Ver on SM-N970F
Once more GJJ, Thank u.
Click to expand...
Click to collapse
Thanks for the feedback I will make new builds for crdroid soon my friend, and add the info take care ok!

New builds are up!
06/01/2023
changelog:
- Synced CrDroid sources
- Minor fixes

New builds are up!
11/01/2023
changelog
- Update crDroid version to 9.1
- January security patch
- Minor fixes
- Synced crDroid sources

New builds up!
14/01/23
changelog
- Add OTA support
- Synced CrDroid sources

Good morning,
I installed this fantastic rom, one question, only one line appears in the navigation bar and not the classic 3 icons.
Even though the navbar style is set.
Can you help me? thank you

Massimo_1965 said:
Good morning,
I installed this fantastic rom, one question, only one line appears in the navigation bar and not the classic 3 icons.
Even though the navbar style is set.
Can you help me? thank you
Click to expand...
Click to collapse
Will look into it for next build

I will update soon guys sorry for the delay I've been busy.

i have question.....i have note 10 UEA no signal, if i flash this rom? is signal appear? thanks (sorry for my bad english)

🍌[ROM][13][OFFICIAL] BananaDroid Galaxy Note10 series D1/D2S/D2X [June 24 2023][OTA][Encryption]🍌

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL BananaDroid for Galaxy Note 10 Series by FreeRunner2017
What is this?
BananaDroid is an AOSP based ROM, with smooth fluidity,performance and customization
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
Features: https://www.bananadroid.com/about.html
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
Lights
Sound/vibration
Known issues
Nothing yet
You tell me
INSTALLATION INSTRUCTIONS!
Flashing Instructions:
Pre-installation:
Install lineage recovery (HERE)
First time installation:
Download the respective rom for your device (d1=Note10) (d2s=Note10+) (d2x=Note10+ 5G)
Format data (clears internal storage), wipe system, cache, dalvik/art cache
Sideload the rom zip
Gapps are included
For root sideload magisk delta apk HERE
Reboot device and enjoy.
Update installation:
Note: From 04/16 build forward you can just update through the OTA. Or you can update with the same method below.
Download the respective rom for your device (d1=Note10) (d2s=Note10+) (d2x=Note10+ 5G)
Sideload the updated rom zip
Optionally wipe cache and dalvik cache
Reboot device and enjoy the new update.
Stay healthy eat bananas!
ROM DOWNLOAD:
D1
D2S
D2X
Stay tuned in our telegram group
Our Telegram channel
Also check out our telegram for any questions or just for a chat @FrEeRuNnEr4EvEr-9820 , also check out my releases channel @FreeRunner4everupdates
Changelog 06/23/2023
- Upstream kernel to 316
- Fixed Snapchat and ebay issues
- Fixed some sepolicy issues
- Fixed camera freezing issues
- Replaced stock aperture camera with SGcamGo
- Synced BananaDroid sources
- Many miscellaneous
improvements
Changelog 05/21/2023
- Upstream kernel to 315
- Added more qs header images
- Added aosp music ticker
- Synced BananaDroid sources
- Many miscellaneous
improvements
Changelog 04/16/2023
- Merged with Android-13.0.0_r41 QPR2
- April security patch
- Use different monet customization
- Drop some features due to QPR2 merge
- Some improvements on gamespace
- A little memory optimization
- Initial OTA support
- Other minor improvements under the hood
Changelog:
02/11/23
- february security patch
- upstreamed latest linux kernel
- removed dynamic encryption
- fixed charging info
- many imporvements
- synced banana sources
02/03/23
- gapps included for now
- banana goodness
- many fixes and improvements
- synced banana sources
01/05/23
- Initial build
- Delicious banana goodness
- January security patch
- Synced banandroid sources
Android OS version: 13.0.0_r43
Security patch level: May 2023
Build author/Device Maintainer: FreeRunner2017
Source code: https://github.com/bananadroid
Device Source code: https://github.com/LeDrew2017
Kernel Source code: https://github.com/awakened1712/android_kernel_samsung_exynos9820
bananadroid for sources
Expressluke for helping me along the way

First

hey guys new builds are up!
changelog
02/03/23
- gapps included for now
- banana goodness
- many fixes and improvements
- synced banana sources

Can i flash this room for NOTE 10 5G (SM-971N) ? Thank u

nhockan said:
Can i flash this room for NOTE 10 5G (SM-971N) ? Thank u
Click to expand...
Click to collapse
I don't think so.

On first I like the ROM,it's nice and fast and it has ton of customisation.I don't like that the apps on home screen can't be whit the same color as the Monet .And when you add Google account it crashes and can't restore the apps,wifi passwords etc.This thing is little frustrating but overall it's nice .If someone know how to fix it I"lol be grateful.Cheers!

Velkobeast said:
On first I like the ROM,it's nice and fast and it has ton of customisation.I don't like that the apps on home screen can't be whit the same color as the Monet .And when you add Google account it crashes and can't restore the apps,wifi passwords etc.This thing is little frustrating but overall it's nice .If someone know how to fix it I"lol be grateful.Cheers!
Click to expand...
Click to collapse
I will try different gapps package, sorry the links aren't working rn but I will update the links today.

FreeRunner2017 said:
I will try different gapps package, sorry the links aren't working rn but I will update the links today.
Click to expand...
Click to collapse
Links are working again guys!

Velkobeast said:
On first I like the ROM,it's nice and fast and it has ton of customisation.I don't like that the apps on home screen can't be whit the same color as the Monet .And when you add Google account it crashes and can't restore the apps,wifi passwords etc.This thing is little frustrating but overall it's nice .If someone know how to fix it I"lol be grateful.Cheers!
Click to expand...
Click to collapse
Next builds will have Google restore fixed..thanks for choosing BananaDroid, stat healthy eat bananas my friend

Hey guys just waiting on march update then I will release again thanks!

hi, i am having diffiuties with this rom. its just showing the boot banana and repeating. cant get into the rom. does this need lineage recovery or can i use twrp. any help would be appreciated. id really like to try ths rom out. note 10 plus d2s is my device.

x13igpoppa said:
hi, i am having diffiuties with this rom. its just showing the boot banana and repeating. cant get into the rom. does this need lineage recovery or can i use twrp. any help would be appreciated. id really like to try ths rom out. note 10 plus d2s is my device.
Click to expand...
Click to collapse
ok so i was able to install this but not using your instructions. i installed lineage recovery wiped ,format, flashed banana rom, flashed magisk. everything is working great now. nice rom!

x13igpoppa said:
ok so i was able to install this but not using your instructions. i installed lineage recovery wiped ,format, flashed banana rom, flashed magisk. everything is working great now. nice rom!
Click to expand...
Click to collapse
I will update instructions in the OP, and also will update when march security patch gets merged.

hi，I flashed the latest version of the ROM, and I am using a 5G SIM card from China Unicom. However, this system only supports 4G. Is it a problem with my settings or the system itself?

RogersHuang said:
hi，I flashed the latest version of the ROM, and I am using a 5G SIM card from China Unicom. However, this system only supports 4G. Is it a problem with my settings or the system itself?
Click to expand...
Click to collapse
I'm not sure bro, are u referring to volte?

Hey guys, sorry for the delayed updates. BananaDroid will be released sometime today or early tomorrow thanks for your patience and stay healthy eat bananas

Time for an update!
Changelog 04/16/2023
- Merged with Android-13.0.0_r41 QPR2
- April security patch
- Use different monet customization
- Drop some features due to QPR2 merge
- Some improvements on gamespace
- A little memory optimization
- Initial OTA support
- Other minor improvements under the hood

FreeRunner2017 said:
OFFICIAL BananaDroid for Galaxy Note 10 Series by FreeRunner2017
What is this?
BananaDroid is an AOSP based ROM, with smooth fluidity,performance and customization
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
Features: https://www.bananadroid.com/about.html
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
Lights
Sound/vibration
Known issues
Nothing yet
You tell me
INSTALLATION INSTRUCTIONS!
Flashing Instructions:
Pre-installation:
Install recovery (TWRP) (Download from here)
First time installation:
Download the respective rom for your device (d1=Note10) (d2s=Note10+) (d2x=Note10+ 5G)
Format data (clears internal storage), wipe system, cache, dalvik/art cache
Copy and install the rom zip
Reboot device and enjoy.
Update installation:
Note: From this build forward you can just update through the OTA. Or you can update with the same method below.
Download the respective rom for your device (d1=Note10) (d2s=Note10+) (d2x=Note10+ 5G)
Copy and install the updated rom zip
Optionally wipe cache and dalvik cache
Reboot device and enjoy the new update.
Stay healthy eat bananas!
ROM DOWNLOAD:
D1
D2S
D2X
Stay tuned in our telegram group
Our Telegram channel
Also check out our telegram for any questions or just for a chat @Exynos9820discussion , also check out my releases channel @FreeRunner4everupdates
Changelog 04/16/2023
- Merged with Android-13.0.0_r41 QPR2
- April security patch
- Use different monet customization
- Drop some features due to QPR2 merge
- Some improvements on gamespace
- A little memory optimization
- Initial OTA support
- Other minor improvements under the hood
Changelog:
02/11/23
- february security patch
- upstreamed latest linux kernel
- removed dynamic encryption
- fixed charging info
- many imporvements
- synced banana sources
02/03/23
- gapps included for now
- banana goodness
- many fixes and improvements
- synced banana sources
01/05/23
- Initial build
- Delicious banana goodness
- January security patch
- Synced banandroid sources
Android OS version: 13.0.0_r41
Security patch level: April 2023
Build author/Device Maintainer: FreeRunner2017
Source code: https://github.com/bananadroid
Device Source code: https://github.com/LeDrew2017
Kernel Source code: https://github.com/awakened1712/android_kernel_samsung_exynos9820
bananadroid for sources
Expressluke for helping me along the way
Click to expand...
Click to collapse
Does mobile data as in connecting to the internet work? Because it looks alot like crDroid but with more customizable features and its a banana

Xerian said:
Does mobile data as in connecting to the internet work? Because it looks alot like crDroid but with more customizable features and its a banana
Click to expand...
Click to collapse
Yes everything works bro

FreeRunner2017 said:
Yes everything works bro
Click to expand...
Click to collapse
well i must have installed it wrong cause i set it up and i had no volte at all unless i call. i've been searching for custom roms for my note 10 and there are a few that actually work with voLTE

Develop Bugs

welcome