Related
After updating to android n the lockscreen has become incredibly laggy. Is there anyway (root or no-root) to fix this?
Kudret Davudov:
Flash latest firmware then wait for the blue android screen that says installing updates etc etc...
After that screen immedietly boot into download mode and flash twrp then restart and again immedietly boot into twrp
Just dont let phone boot into android
With this trick you should get /data decrypted so no needed to wipe and not need for no verity no encrypt patch because it lags your phone
ChARCOOL said:
Kudret Davudov:
Flash latest firmware then wait for the blue android screen that says installing updates etc etc...
After that screen immedietly boot into download mode and flash twrp then restart and again immedietly boot into twrp
Just dont let phone boot into android
With this trick you should get /data decrypted so no needed to wipe and not need for no verity no encrypt patch because it lags your phone
Click to expand...
Click to collapse
Ah, okay. I might wait off a bit because I've just recently flashed my phone, and it's kinda a pain in the ass, especially since apparently I have no idea how titanium backup works lol.
ChARCOOL said:
Kudret Davudov:
Flash latest firmware then wait for the blue android screen that says installing updates etc etc...
After that screen immedietly boot into download mode and flash twrp then restart and again immedietly boot into twrp
Just dont let phone boot into android
With this trick you should get /data decrypted so no needed to wipe and not need for no verity no encrypt patch because it lags your phone
Click to expand...
Click to collapse
Hi,
I followed this through the final instructions (bold) wihtout the phone booting into android (rebooted into download once the blue install screen finished). I wasn't sure what I needed to do in TWRP once I rebooted there, so I tried flashing su-config and an sbin 2.82 sr5 supersu install - then rebooted finally into android, and the unlock lag was back.
what needs to be done once twrp flashed and user has rebooted immediately into twrp?
[edit - further experimenting suggests supersu 2.82 versions all cause pattern unlock lag, while 2.79 does not but cannot be hidden via suhide]
thanks, sure I am missing something obvious here.
DullPeon said:
Hi,
I followed this through the final instructions (bold) wihtout the phone booting into android (rebooted into download once the blue install screen finished). I wasn't sure what I needed to do in TWRP once I rebooted there, so I tried flashing su-config and an sbin 2.82 sr5 supersu install - then rebooted finally into android, and the unlock lag was back.
what needs to be done once twrp flashed and user has rebooted immediately into twrp?
[edit - further experimenting suggests supersu 2.82 versions all cause pattern unlock lag, while 2.79 does not but cannot be hidden via suhide]
thanks, sure I am missing something obvious here.
Click to expand...
Click to collapse
Unfortunately supersu has built-in no verity patch, that is why you still get lock screen lag. I use magisk and it works perfect for me with no lags
ChARCOOL said:
Unfortunately supersu has built-in no verity patch, that is why you still get lock screen lag. I use magisk and it works perfect for me with no lags
Click to expand...
Click to collapse
thanks. I am surprised this isn't a more common complaint - do you know if there are recent samsung models with 7.0 that don't have this issue? It seems like anyone with an affected model that tries to run suhide, for example, would run into this immediately.
alternately, does this create the same problem on 6.0?
EDIT - this thread suggests maybe (not verified) it wasn't a problem on nougat 7.1.1 as well https://forum.xda-developers.com/galaxy-j7/how-to/approach-to-rooting-7-1-1-t3709414
I have posted there to try to verify.
I just rooted my phone again with magisk using my method and i didn't got verity error and there is no lock screen lag
ChARCOOL said:
I just rooted my phone again with magisk using my method and i didn't got verity error and there is no lock screen lag
Click to expand...
Click to collapse
thanks. i have rooted with magisk recently and didn't have a lag error either - but the app I need to use for this claims to requre supersu, and in fact seems to not like magisk at all.
also regardless of the 7.1.1 question, neither of the possible phones have a 7.1.1 available.
still looking for a 3rd way to handle this and get suhide, but looks grim for now. maybe simply moving up to the latest 7.0 firmware (my current build is a u2 build from ~~october, so haven't put the U3's on due to what I read about locking the bootloader etc) would fix it. It just seems to be an uncommon problem and that makes me think that there is some way to use a samsung with 7.0 with supersu 2.82 without this issue. Otherwise the number of questions about it from samsung users should be overwhelming.
do you know if it is disabling dm verity, or disabling forced encryption, that is causing the lag? if it is dm verity, would re-enabling dm verity via adb be a work-around? (I dug around for a script to enable verity and encrypt, no dice so far).
thanks for your help.
ChARCOOL said:
Unfortunately supersu has built-in no verity patch, that is why you still get lock screen lag. I use magisk and it works perfect for me with no lags
Click to expand...
Click to collapse
follow-ups to your method -
why is it necessary to let the blue install screen process run before booting back to download to install twrp? if one just goes from download firmware and reboots to download immediately, what changes?
i played around with the no-verity-no-encrypt issue (both with the patch and with aroma su config) and it appears the no-encrypt is what is leading to the lag.
one drawback I am running into with the method above (flash firmware, run blue install screen, download-twrpflash, then immed. to recovery, then install in my case aroma & 2.82su is that i cannot mount data again in twrp once android has loaded, but that seems to be expected as it is not fully decrypting (even though it isn't encrypted, as I understand it?)
DullPeon said:
follow-ups to your method -
why is it necessary to let the blue install screen process run before booting back to download to install twrp? if one just goes from download firmware and reboots to download immediately, what changes?
i played around with the no-verity-no-encrypt issue (both with the patch and with aroma su config) and it appears the no-encrypt is what is leading to the lag.
one drawback I am running into with the method above (flash firmware, run blue install screen, download-twrpflash, then immed. to recovery, then install in my case aroma & 2.82su is that i cannot mount data again in twrp once android has loaded, but that seems to be expected as it is not fully decrypting (even though it isn't encrypted, as I understand it?)
Click to expand...
Click to collapse
Its working so well for me and you need to go to download mode after blue install because it installs csc and cleans old stuff that is why you need to do it if you don't want broken phone
First time messing with this phone
followed the instructions for unlocking bootloader, installing TWRP, and rooting here: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Successfully unlocked bootloader, flashed TWRP, but now hung up on SuperSU.
Flashed SuperSU VV2.82 zip from http://www.supersu.com/download in TWRP
Wiped dalvik and cache
reboot
Now it's been about 10 minutes. Blank screen and blue LED.
Hold power until it reboots again, Android sometimes has issues with new boot.imgs at first
l3ones said:
Hold power until it reboots again, Android sometimes has issues with new boot.imgs at first
Click to expand...
Click to collapse
I did, three times.
I ended up flashing the latest complete OTA to get it back to being able to boot.
Are you on Oreo? I don't know if SuperSU is compatible with it. I switched to Magisk a few weeks ago.
Macusercom said:
Are you on Oreo? I don't know if SuperSU is compatible with it. I switched to Magisk a few weeks ago.
Click to expand...
Click to collapse
was on the latest stock OTA, which was 8.0.0
Flashed Mgisk after flashing the latest OTA, and everything is working swimmingly
Exact Same thing happened to me last night.
And I lost my internal sdcard.
Eventually flashed stock recovery didn't do anything different so flash twrp again and got sdcard back.
It was a strange one.
Now I'm waiting for an update or the right file for root.
Maybe this has something to do with Keymaster?
So, I've been trying to get my OP5t working for a solid six hours straight, and I'm just about to loose my mind.
I'm sorry if this isn't the right place to post this. I've always just sorta lurked about in here.
Here's the deal for my OP5t.
Now I'm stuck in a situation where I can get my phone to boot on all of the OOS versions I've mentioned, but always without root. And If I do manage to get it booting, I end up loosing TWRP and having to reflash it through fastboot.
Since I've always just relied on Titanium backup (yes I know, how silly) I've never had any trouble restoring my backups, but since I've now lost root and being unable to obtain it again, I'm locked out of all my sweet app data. It's all a bit messy now, and I think I'm begging to repeat previous steps and combinations, but here's a list of what I've tried. I really hope some white knight comes to the rescue.
It all happened when I tried doing a clean flash wiping caches, data and system of OOS 5.0.3 (coming from the latest official OOS Nougat build). It all started when I tried to flash the magisk 15.3 after this boot, which resulted in ERROR 1.
- I've tried installing both the old version the previous nougat build and the two most recent stable oreo ones. Wiping thoroughly inbetween even, since at this point I have nothing left to loose.
- Whenever I try to flash magisk 15,1 /3 or 4 I get error 1. Whenever I try to flash supersu (s.82 included the modded SR5 version) I Just don't get root or end up in an endless +1 screen (before the spinner) for 12+ minutes.
- I've tried flashing the stock boot.img
- I've tried all of the above in combination with bluspark recovery 8.61 and 69 + the r100 kernel
- I've tried using codeworks cheesburger and dumpling recoveries
What am I missing here? I assume my phone is encrypted since it asks for a code to open TWRP.
I've never had any issues so grave that I couldn't just search my way through it, but this time I'm at my wits end, and just about ready to settle(tm) for no root.
I've never tried exporting a log, but I sense that I do that from TWRP and then grab it via a file manager from some folder?
Use codeworkx dumpling TWRP, dirty flash your ROM, boot it once, then reboot to recovery and flash Magisk 15.3. Should be all you need.
For Nougat, I think it's better to flash Magisk 14, on some ROMs.
New apps
Great information provided by many users. I have just joined this group and read many experts advice. Thanks
Latest SuperSU (beta 2.85 i believe) don't work on OP5T Oreo update (stable or Open Beta). Don't know why, but I had to use Magisk. ANd I must say, I'm pretty happy with it, too!
Elfomze said:
So, I've been trying to get my OP5t working for a solid six hours straight, and I'm just about to loose my mind.
I'm sorry if this isn't the right place to post this. I've always just sorta lurked about in here.
Here's the deal for my OP5t.
Now I'm stuck in a situation where I can get my phone to boot on all of the OOS versions I've mentioned, but always without root. And If I do manage to get it booting, I end up loosing TWRP and having to reflash it through fastboot.
Since I've always just relied on Titanium backup (yes I know, how silly) I've never had any trouble restoring my backups, but since I've now lost root and being unable to obtain it again, I'm locked out of all my sweet app data. It's all a bit messy now, and I think I'm begging to repeat previous steps and combinations, but here's a list of what I've tried. I really hope some white knight comes to the rescue.
It all happened when I tried doing a clean flash wiping caches, data and system of OOS 5.0.3 (coming from the latest official OOS Nougat build). It all started when I tried to flash the magisk 15.3 after this boot, which resulted in ERROR 1.
- I've tried installing both the old version the previous nougat build and the two most recent stable oreo ones. Wiping thoroughly inbetween even, since at this point I have nothing left to loose.
- Whenever I try to flash magisk 15,1 /3 or 4 I get error 1. Whenever I try to flash supersu (s.82 included the modded SR5 version) I Just don't get root or end up in an endless +1 screen (before the spinner) for 12+ minutes.
- I've tried flashing the stock boot.img
- I've tried all of the above in combination with bluspark recovery 8.61 and 69 + the r100 kernel
- I've tried using codeworks cheesburger and dumpling recoveries
What am I missing here? I assume my phone is encrypted since it asks for a code to open TWRP.
I've never had any issues so grave that I couldn't just search my way through it, but this time I'm at my wits end, and just about ready to settle(tm) for no root.
I've never tried exporting a log, but I sense that I do that from TWRP and then grab it via a file manager from some folder?
Click to expand...
Click to collapse
Same kind of problem here. After clean flashing Oreo can't root anymore. Flashing Magisk ends up in Bootloop. Tried various combinations of TWRPs and Magisk versions, no use. :/
Kunjuuuz said:
Same kind of problem here. After clean flashing Oreo can't root anymore. Flashing Magisk ends up in Bootloop. Tried various combinations of TWRPs and Magisk versions, no use. :/
Click to expand...
Click to collapse
Okay so I managed to figure it out. The problem seemed to be that where one TWRP version could flash magisk, another wouldn't be able to decrypt the phone properly, which I think is what caused the bootloops/non sticky root for me (though I'm by no means sure of this).
I managed to get it worked out by fiddling around a bit more with the different versions and using the a Remix ROM to remove the pin (which I probably should've done initially). I also noticed that I didn't originally pay attention to the fact that codeworks' (non universal) recoveries are aimed at 8.0 and 8.1 respectively, which might have complicated things a bit more for me.
Sorry for spamming up the thread. I hope you figure things out though
The latest SuperSu does not work with 8.1 for us and some other (or all other) 8.1 phones.
And... SuperSu is no longer in development.
Rumor has it a slightly older SuperSu version works in 8.1 but I never got around to trying it and forget the version # now.
And Lineage has not released a SuperSu/superuser for 8.1 yet.
It bums me out because I want that Magisk alternative.
Not a fan of Magisk yet.
Elfomze said:
Okay so I managed to figure it out. The problem seemed to be that where one TWRP version could flash magisk, another wouldn't be able to decrypt the phone properly, which I think is what caused the bootloops/non sticky root for me (though I'm by no means sure of this).
I managed to get it worked out by fiddling around a bit more with the different versions and using the a Remix ROM to remove the pin (which I probably should've done initially). I also noticed that I didn't originally pay attention to the fact that codeworks' (non universal) recoveries are aimed at 8.0 and 8.1 respectively, which might have complicated things a bit more for me.
Sorry for spamming up the thread. I hope you figure things out though
Click to expand...
Click to collapse
Locking the bootloader, wiping, and unlocking the bootloader again fixed the issue for me.
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
Code:
tar -xzf ********.tgz
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
viking777 said:
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
Click to expand...
Click to collapse
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
12:121390 said:
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
Click to expand...
Click to collapse
Anti roll back is disabled and not an issue if bootloader is unlocked
Nice thread. Tried it as well but no chance 10.0.3.00 + twrp + magisk. And you are right the problem is twrp.
Sent from my Phh-Treble vanilla using Tapatalk
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
brother i also want to install RR PIE Rom can you please give me the guide link?
hossman said:
Anti roll back is disabled and not an issue if bootloader is unlocked
Click to expand...
Click to collapse
correct it is not. what happened was.. lol. i thought i was crafty and did some file swapping and made miflash setups that would flash so the stock files as usual , but with gsi's like RR and/or bootleggers for the system image. and it works, up until i flashed from RR to bootleggers with those setups described previously . there is where my genius was flawed. lol. lesson learned
---------- Post added at 06:43 AM ---------- Previous post was at 06:38 AM ----------
marstonpear said:
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
Click to expand...
Click to collapse
for me, i have not come across anything caused by the GSI. any issues I've faced are purely self inflicted.
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Voodoojonny said:
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Click to expand...
Click to collapse
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
viking777 said:
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
Click to expand...
Click to collapse
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Voodoojonny said:
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Click to expand...
Click to collapse
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
viking777 said:
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
Click to expand...
Click to collapse
There seems to be some bugs restoring system and vendor... Some users talked about... I usually only save and restore the data and boot partition and I never had any problems with that. For all other partitions you can use miflash or fastboot...
Yeah all my twrp full backups don't work after a fresh stock installment either, that's very annoying.
The twrp version for daisy is bugged. Backups are not working, the wifi with GSI Roms on pie stock is not working anymore as soon as twrp is installed as well.
Sent from my Phh-Treble vanilla using Tapatalk
Thanks for the replies above. @voodoojohnny
In my case it was the data partition that caused the restore to fail, vendor and system and boot all seemed to go through normally. @cd492
Based on what you say along with my own experiences and those of voovoojohnny, it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
viking777 said:
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
Click to expand...
Click to collapse
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
InfinityXDA said:
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
Click to expand...
Click to collapse
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
Click to expand...
Click to collapse
I meant it, at least for now, but maybe your post will help somebody else.
viking777 said:
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
I meant it, at least for now, but maybe your post will help somebody else.
Click to expand...
Click to collapse
Yes I didn't see that post but understand I didn't give you links to the official TWRP, I gave you the unofficial fixed TWRP which actually features SD Card Support and trust me it works completely fine I haven't had a problem yet. This took me hours upon hours to figure out what I was doing wrong.
The only specific reason you are not successfully getting TWRP is because you didn't flash the aboot.img after installing the zip.
I hope this helps you in the future!
thanks InfinityXDA for the tutorial, you should create a post just for it~
Just curious if anybody has some insight here...
I have a XT1710-09 which I have unlocked the bootloader and went to Lineage, only to find that the moto mods I use aren't working. So I've reverted back to the stock ROM. Everything works, but if I try and flash any version of Magisk (17.3 through 19), my phone will boot loop. I have tried the below items, but they all result in a boot loop:
https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
I can recover from the bootloop by reflashing the boot.img, but I obviously don't have any modification support. I've also noticed the boot.img seems to overwrite my TWRP install on the first boot when applying the encryption.
My phone is currently being flashed with ALBUS_OPS27.76-12-25. Does anybody have any guidance on getting this working? Sadly, I want to get the AAC codecs installed, otherwise my bluetooth system keeps falling back to sbc. Worked great in Lineage, but I have too many moto mods that wouldn't work (including the JBL and Hasselblad).
Thanks!
Are you sure you executed the two commands for keeping force encrypt and keep dm-verity before flashing on TWRP terminal? Because the only reason Magisk ever gives me bootloop on stock is because it automatically sets keep force encrypt, but not the other one.
And of course use v19
Hi!
I wanted to simply update to v24.1 in Magisk Manager on my Xiaomi Mi 9 SE. It rebooted successfully but the wi-fi wouldn't turn on (automatically turned off right when I tried turning it on) and the fingerprint sensor wouldn't recognize my fingerprint.
I looked it up and people recommended disabling and/or uninstalling all modules but it didn't work (I only had Magisk Hide and some other I don't remember). Another was to uninstall Magisk so I tried it and accidentally clicked "restore images". After that, it would only load into TWRP.
It's been like 2 years since I've done any of this stuff so I don't remember much. I didn't even install the official Xiaomi update for well over a year so I'm not even sure which Android version it had, maybe 9?
I have tried flashing Magisk uninstall.zip and also a boot.img (unfortunately I have no clue which the exact ROM is so I just randomly tried this 2019-10-23 one). No luck.
Should I keep trying boot images? I don't want to flash the wrong file and make it worse or lose my data, especially not the app data. I did a TWRP backup now but I don't have a previous one from before I could boot into Android.
Can someone walk a noob through what to do so I don't mess it up more?
Just flash an entire Fastboot ROM without wiping user data (mi flash allows you to do that) and make sure the ROM's version is the same as your device or higher
You can find fastboot images at xiaomifirmwareupdater.com