Pixel 3XL Radio off - Google Pixel 3 XL Questions & Answers

Good morning,
Last night, my phone was working really well, until I plugged it into the phone charger. After doing that, the internet stopped working all together and wasn't getting any data. I reset the phone and when it came back up, it wouldn't recognize my sim card or even be able to connect to WiFi.
Issues
- Doesn't recognize Sim card (new phone does Pixel 4XL, had to get new one) - New sim card doesnt work
- WiFi does not work, but I can connect hot spot to the pixel 4
- Blue tooth works
- I have tried the *#*#4636*# and I get radio off, I get this
- SMC: Refresh Error when pressing Update or Refresh
- When I try to make a call, it says to disable Airplane mode
I have tried turning off phone, and resetting many times.
Has anyone had this issue or been able to fix it?

If airplane mode is off, have you tried a different sim card?
Or even pulling and reinstalling it?

- Doesn't recognize Sim card (new phone does Pixel 4XL, had to get new one) - New sim card doesnt work

Have you tried flashing the full factory image - or at least the modem partitions?
Edit: considering that your problem started when plugging the charger in, you might want to take a good look at the charging port.

hi have you solved your problem? I have the same problem!

I have the same problem. Could someone solve the Problem?
Baseband "Unknown", no IMEI, no Wifi-MAC Adress

koni2222 said:
I have the same problem. Could someone solve the Problem?
Baseband "Unknown", no IMEI, no Wifi-MAC Adress
Click to expand...
Click to collapse
I have the same issue have you solved it?

Related

[Q] usb connection type stuck on charge only?

Hey,
Just flashed my DHD to the latest 2.0.9 Android Revolution, and now when I plug in the usb from the computer it goes to auto charge. I already checked "Connect to PC" settings and I have ask me ticked on, and even changing the default does not help.
Tried restarting the phone and what not...
Help please?
Thanks!
Now I also tried full wipe and flashing 2.0.9 again, and still no luck...
This may sound like a stupid question, but have you tried a different cable?
Have you changed anything like the Radio recently?
Other than that, if it was a software issue, a factory wipe would have cured it.
Hey, in fact I was at work when I did all this with a Nokia cable...
Fixed after I used a motorola cable from my droid... Then came back to work the next day and the nokia cable working again.
Yes, I did flash the radio recently, and also did a full wipe and mentioned above. Weird how things suddenly start working again. I swear I did all the restart etc etc... hopefully will not happen again =/

USB and touch screen no longer working

A few days ago my phone was stuck on a bootloop at the doomkernel logo so i flashed the latest version of doomkernel on and it seemed to fix the problem. Then while copying the wi-fi modules to my memory card i got a weird popup about titanium update crashing so i closed it. Immediately after that my touchscreen stopped working. I didnt think much of it at the time so i just rebooted my phone into recovery and flashed the new wi-fi modules for doomkernel. When I booted the phone the touchscreen still wasnt working but now it wouldnt recognise the usb cable, whether plugged into the computer or charger. I thought it was the cable so I tried a few others but it still wouldnt pick up. When the battery died and i plugged it into the charger it charges while the phone is switched off but when the phone is switched on it wont charge at all. This led me to believe there was some sort of software/driver/kernel issue or something. I could still control most of the phone using the gamepad so i backed up all my important things and flashed stock 4.0.2.A.0.62 firmware back on the phone. Problem still persists and I cant flash the stock wi-fi modules back onto the phone because I cant gain access to the memory card via usb and i cant type on the phone so i cant download it using the phone. Does anybody have any suggestions? Has anybody else even been through something like this?

Stuck in "download mode" whenever i plug a usb

Hi i recently purchase a second hand LG-E971 (locked to rogers and not rooted).
The phone seem to be working at first but whenever
i connect the phone to the computer or charge it on the wall
it goes to "download mode" the only way to exit it is to hold pwr for 8sec.
i got all the driver installed properly in "download mode"
tried to factory reset it with E97110D_00.KDZ and E97110E_00.KDZ
with success but still having the same problem
whenever i plug a usb cable in
i installed the driver for PC
LGUnitedMobileDriver S4981MAN38AP22 ML WHQL Ver 3.8.1.exe
when i connect the phone the driver got installed automatically
but the phone doesnt connect to the PC (win7 i tried 2 different computer) in any mode it is only charging
Is there a KDZ that is already Root with CMW or TWRP that i can factory reset it?
Thank you.
I would contact rogers to get the device checker under waranty.
If you have flashed the original KDZ, you eliminate all software related issue that could've cause this. It must be an hardware issue.
i have same problem. since today whenever i plug the phone to charge it it goes to download mode.
any way to fix it? im on cm but didnt change anything recently
I would suggest to start with cleaning the USB pirt on the phone. Compressed air and a wooden toothpick will help. I had a similar problem with my old SGS2, when dirt in the socket was causing sime weird behaviour.
Worth trying before going to the service centre...
having the same issue as well..i hope there's a possible fix available.
dead thread i know but i have SOME valuable information if you have this phone lying around "dead"ish. i went through a lot of crap trying to revive my dead battery phone and i remembered, i just by chance stumbled upon a "solution" of sorts. it basically is taking out the sim card, turning on the phone WITHOUT the cable, and once it's on i can connect it again. the moment i put in a sim, the damn thing starts flaking out. i'm currently using solidkernel 1.95 gproj with cm 12.0 official nightly 10/16(2015). this had happened to me like a month and a half ago or so as well. ANYWAY, it's either a radio thing, a kernel thing, a rom thing, or a combination of the three. that would NOT explain why the phone assumes download mode has been invoked, especially given it should only happen through a special pre-boot procedure using buttons (two no less). still, it is possible that my sim slot is too dirty, or my sim itself is problematic? i don't know. what do you guys think?

Rooted Samsung Galaxy Nexus w/ CM11 Won't Connect to PC, or Charge

Hello,
tonight I was out with my friends, and I was told to take pictures. When I did, I unlocked my phone and immediately got a "system.ui stopped working" error and then my phone froze. when it freezes i usually lock my phone and continue from there, but then it wouldn't turn back on, so I took the battery out, and put it back in, and now it won't turn back on! I've taken the battery and SIM out, held the power but to drain power from the phone, but nothing happened. so when I got home, I went to my PC and plugged the two in but my PC doesn't even recognize the phone! Although when i plug in the phone without a battery and try to power on, Windows repeatedly plays the device connected and disconnected sound, but windows explorer doesn't see it.
The phone will charge though, nothing says it does, but I put my tongue on the battery before and after leaving it on charge, and results were much different.
I've tried a ton of things to fix this, but nothing has worked. I really need help for this has many pictures, apps texts and contacts on the phone! If anyone might have a clue on how to fix this, please say so, I really need help!
Other info about phone:
Rooted
Unlocked
Running CM11 (latest stable build as of 14/11/14)
Stock Kernel
Always get "System.UI has Stopped" warning, but no issues until now
USB Charger does work properly
I will take any and all advice! It's really important this is fixed ASAP!
Thanks
Cole, or CyanoNexus
1. Try Odin3 & Download mode to get back to stock
2. Failing that, try http://forum.xda-developers.com/gal...de-unbrick-guide-galaxy-nexus-maguro-t2146790
FredFS456 said:
1. Try Odin3 & Download mode to get back to stock
2. Failing that, try http://forum.xda-developers.com/gal...de-unbrick-guide-galaxy-nexus-maguro-t2146790
Click to expand...
Click to collapse
Thank you for the reply, but either method does not work. As I had said, my PC does not recognize it. Do you have anything else?
Bump? Sorry, really need help!
Bump again..

Phone not recognize by PC (after root trial)

Hello guys
2 days ago I tried to root with my samsung s9, While I was in modality mode, the cable (which was not really good) came off, so I turned off the phone and I tried to do it again, but from that the PC did not recognized my phone anymore (it only charges), I tried everything, I followed all the tutorials on YouTube but Nothing, a bug report also appeared on my phone, anybody can help me please
Topgun M said:
Hello guys
2 days ago I tried to root with my samsung s9, While I was in modality mode, the cable (which was not really good) came off, so I turned off the phone and I tried to do it again, but from that the PC did not recognized my phone anymore (it only charges), I tried everything, I followed all the tutorials on YouTube but Nothing, a bug report also appeared on my phone, anybody can help me please
Click to expand...
Click to collapse
go into developer mode and change how the phone interacts when you connect a USB cable between it and a computer. Im betting its set to "charge only". Could the the stock setting on the ROM youre using
edit: i re-read your post and im curious if the phone even boots.

Categories

Resources