Related
When you have one of the smartest smartphones at your disposal, you obviously want to make sure that you have the smartest protection out there. The rugged OtterBox Defender Case safeguards the thin and light body of your Samsung GALAXY Note from damages under virtually , any circumstances for the ultimate protection solution!
DESIGN AND FEEL:
Full access to all the Samsung Galaxy Note’s buttons and features through the case, including camera, flash and stylus opening.
Silicone plugs provide full coverage of volume controls, headphone jack, micro USB opening, power button and charging port.
Two-layers of protection include a sturdy polycarbonate inner layer and rugged silicone outer layer.
Inner polycarbonate layer includes a built-in screen protector and inner foam liner.
Outer silicone layer features a grooved texture on the side for enhanced grip.
BUILD QUALITY AND LAYERS OF PROTECTION
Screen Protection: Built-in screen protector prevents scratches, scuffs and smudges while retaining the sensitivity of the Note’s touchscreen.
Inner Layer: Two-piece polycarbonate snaps together around the Galaxy Note creating a solid shelter. The
inside of the polycarbonate includes a foam inner liner to cushion the Note against oopsies such as bumps,shocks and drops.
Outer Layer: Rugged silicone wraps around the inner polycarbonate layer. The sides of the silicone outer layer feature a grooved texture for enhanced grip.
Holster: Rotating belt clip securely fastens to almost anything and also doubles as a media viewing stand when locked into place. You can face the touchscreen out for use or face it in for maximum protection.
ACCESSIBILITY AND STYLE :
The case is classic black in color, which some people may find boring, where as I just love the simple bold look, it looks very sturdy and strong. It does add some bulk to the phone but for me it wasn’t a deal breaker.The Earpiece,Sensors and front facing Camera are protected with hard plastic edges which are very classy and look stunning.The Volume keys are also fully protected ,as is the Power key on the right side..
At the top , the noise cancelling mic is open and the Headphone jack covered by a small pull-able cover, what is great about this is there is a very hard plastic edge around the Jack port.As with the Top the Bottom is also well protected namely the Micro USB Charging port. The S-Pen is fully open giving great ease of use when pulling out the S-Pen. There is separate openings for Microphone and rear speaker.
One word to describe this case would be: DEFENDER!
"Conclusion"
My overall experience with Otterbox Defender series has been great. This is the Best Protective Case for Galaxy Note as no other case provides this Premium look, Awesome feel, and the Amazing protection that Otterbox provides.
Price :
It is priced at $59.99 on www.otterbox.com
For Images and More info , Visit : www.theandroidcop.com/review-otterbox-defender-case-for-samsung-galaxy-note/
I was fortunate enough to find this case lying around the workplace.
The boss-man said I could have it!
Saved myself $60!
Ouch... feels like having 2 notes inside my pocket, lack of close-up pictures in details
Too bulky for a already large phone... and too expensive.. there is better protection for less out there... IMHO
Sent from my GT-N7000 using XDA Premium HD app
Yes its big, but I'd worked out what size it would be before buying the phone or case. Get a ruler, make a cardboard mock up.
I actually had the case before the phone and it went straight into it on arrival. Working outdoors a lot and having had old candy bar type phones often take a tumble to the ground, I wanted my new phone properly protected.
Having used the phone and case for 6 months, its only tumbled out of pocket once, when not actually clipped in. I typically use the hard beltclip cover, in top pocket of work shirt, with the clip opened over the shirt button. This prevents it riding deeper in the pocket, but the button provides something for the clip to grab, so if during contortions outside, the phone flips out of pocket, it remains clipped to the pocket. Additionally when using the belt clip cover, the silicon shell faces the body, so it seems very unlikely perspiration would find its way into the phone, which seems to be an issue with some phones and their usb/headphone ports (covered with defender)
It seems it would also be quite secure if deeper in the pocket without the belt clip cover, the silicon case grabs the pocket well, although in this position the button is exposed to body moisture (if theres no stock seal around that)
What I did NOT like about the case was the built in screen protector, like all matte finish protectors I have seen, it blurs the pixels giving a fuzzy effect to the display.
I carefully removed the built in protector, pushing around with thumb in warm weather worked, and replaced it with a Spigen glas.t, tempered glass protector. The glas.t is about 0.5mm thick, there is room for it within the defender case. I suspect the tempered glass/silicon adhesive would do a good job of spreading the energy from a sharp impact, performing much like a laminated car windscreen which tend to keep most impact chips in the outer glass layer.
I have the full protection of the defender case, and full visual clarity of the screen. Win/Win
I also do not have to worry about the possibility of dust, grit etc working its way into the case and being held against the screen. This may not happen, I didn't leave it original long enough, but certainly seemed it would be likely in the environments I work in.
Hope this helps someone
Its big, bulky, but is worth it! Own one myself. Its worth the tradeoff for protection of an expensive toy
Well i have this case for over 2 months and i can say that its trully worth the money! The extra protection is awesome as well is the design and grip! However it has 2 downsides IMHO.
1st you have to open it and clean it once per 15 days and believe me at first it's a pain in the ass to open it and you re gonna break some nails .
2nd some areas far on the top on the screen need to be pressed harder i.e. it takes some time to get used to taking down the Notification Center the first days.
Hope this helps!
Hi, few days ago I was happy Z3c owner. Phone is great but it's one of the most fragile phones on market so I'm looking for a case.
I bough Ringke Fusion but seems also not so protective comparing to cases I had before for older phones like Ballistic or Trident.
So, if You would like to help me choose right. Except one I have (Ringke) I found Cruzerlite - looks nice cause on left side only magnetic port is opened so not so many weak spots but it also like Ringke seems like tuned regular TPU for 2$.
Case Mate from Z1c after adding few cutouts looks promising and people are saying it's best protection case. I also found Incipio Dual Layer case but I heard that rubber part is stretching and I hate it when it does.
There are many other cases on eBay for 2-10$ but I would like not to buy another case like this Ringke which is not best choice for me for it's price.
Cruzerlite Bugdroid.
Bought 14 months ago. Great cover
I use the Case-Mate Barely There clear plastic case (edit: for the z3c, not the modified z1c in the poll). It's hard plastic, not TPU, but I like it because it has a very slim profile.
Thank You, but unlike all I prefer something more "bulky". I used that my phone can hit on the street when I'm running and get out of this without a scratch. Pity that there is no such case for Z3c.
Hama Crystal Case for Z3C, fits perfect(without plastic adapters)
This thread should include the Devilcase. It can take hits to concrete, leaves the USB flap and magnetic port exposed, and adds minimal bulk.
I never saw any crash tests with Devilcase but I don't think those tiny parts of foam or sponge between phone and bumper can absorb damage.
I know it looks great but without it phone also looks great and I think with and without this case screen is as well exposed as without it. If I depend only on scratch protection I would take any 0.3mm transparent case.
Anyway thank You for mention.
The sides of the bumper come up about 2mm,so that with a glass screen protector (that you should get no matter which case you buy) there is still about 1mm separating the protector from the offending surface.
And like I said, I've dropped it multiple times onto concrete to absolutely 0 ill effect. It's not like other slim cases, aluminum behaves much differently than silicone.
I'm working in a repair service center and I saw many iPhones after they hit the ground in a alu bumper and they looks same as phones without any protection. Thats why I conclude that all hard cases and bumpers acts the same in contact with the floor.
Of course I'm using tempered glass but it can help in case of direct impact on the screen but it wont help with pressure formed from the side impact.
Still I'd go for something more flexible cause I'd rather not to test aluminum shock absorption.
I think if I wont find anything decent I will order Cruzerlite and after comparing it with Ringke I'll stay with better one.
It sad there is no really rugged case for Z3c.
You can laugh but after reading some reviews I ordered Devilcase.
I didn't want to argue with you, as we had contradictory personal experience. I won't laugh, you made a good choice.
I once had the original Sony case.
Plus: The magnet that opens the screen when opening the case
Minus: The window that is positioned in a different place than the clock widget. One cannot change the position of this clock widget on the lock screen.
Minus: The book-wise opening which makes the front flap being a hindrance for easy handling
Now I bought a cheap one, opening from the top side:
Plus: Easy handling
Plus: Self installed magnet in the flap for automagic opening of the screen when opening the flap.
Plus: Good protection
I have some pictures.
The Sony Cover pictures are taken with original locked phone.
The other pictures with unlocked Marshmallow and destroyed DRM keyes.
It's easy to see the bad picture quality after unlocking. :crying: :crying:
The best by far is the Case-Mate Tough for the Z3 Compact.
It's dual layered with an inner rubber layer and a solid plastic outer layer.
It has cut outs so you can use it with the official Dock DK48 and leaves the usb and sd card flap accessible.
http://www.case-mate.com/products/black-sony-xperia-z3-compact-tough-case
Do You have or tested one??
I have one and it's awesome. Good grip too.
I skipped this one cause most reviews I found was negative. Mostly because like half of the phone is unprotected.
Only a portion of one side is uncovered, all the corners are protected and even if you dropped it sideways the case sticks out.so the phone isn't touched. Try it out you will see how tough it feels.
Make no mistake, the phone is very safe.
devilcase all the way
I dropped my Z3c several times already, sometimes on a pavement. not even a scratch on the phone itself, Barely There protects it really well.
Firstly, I have read through many of the threads existing on protectors.
When I checked YouTube to see if there were any videos comparing screen protectors for the OPX there were none, so I watched a video comparing 4 screen protectors for a different phone. Of these Armorz and Bodyguardz protectors seemed to come out on top, and survive the strenuous tests the videomaker put them through. It seems neither of these brands make protectors for the OPX.
Next I searched this forum and read through many of the threads on the different screen protectors. For as many people that promote the different protectors, there seem to be as many if not more detractors, complaining of rainbox effect, the protector fitting one OPX but not another, air bubbles, etc.
I ordered my OPX today, and I intend to order a Spigen OnePlus X Case Rugged Armor Black but I was hoping to compliment that with a screen protector.
I was hoping to order the best protector, that will fit my OPX, no rainbox effect, and that will not cause any isue with the Spigen Case - does this exist?
Simple answer is it depends on luck.
I have tried several including 1+, Nillkin, generic, full cover... None of them are perfect, if you go for any like the official 1+ one where only the display is covered you may end up with horrid air bubbles around the cover, many people complained of this-I only know of one guy who done it flawlessly. The plus side of this is that cases will fit fine. The full cover one is the best one I've tried, though it has a rainbow effect in the middle of the screen which can be seen under bright light conditions or on a white screen. This screen protector doesn't have any air bubbles and fits great, only downside is the rainbow, some cases should fit fine e.g. I use the Nillkin frosted back cover which fits without issue.
For me the small rainbow is something I can deal with unlike the air bubbles around the whole display which were an eye sore, you'd be lucky if you didn't get any. So it is hit and miss tbh, just trial and error, I wasted a good £20 on protectors for this phone, which is something I'll never do again.
In the end I ordered from Amazon:
OnePlus X Screen Protector,Nillkin®[Anti-Explosion ][With Camera film][With Back Protector]Amazing H+Pro 9H Tempered Glass Screen Protector for OnePlus X
You mention the protector you use covers the whole phone, but the thing is that I also want the added protection of the Spigen OnePlus X Rugged Armour.
Accepting that they all have flaws, as I can probably still cancel my order and change it, and considering I want front screen protection AND the Spigen Rugged Armour case, do you think I would be better with a different protector than the Nilkin?
*Air bubbles are the main thing I wish to avoid, I could live with a Rainbox effect, once it is only visible from certain angles etc.?
It is a real shame there are non more protectors, I really was sold on Bodyguardz or Armorz protectors after watching the videos where they were tested, and was disappointed to discover they do not make protectors the OPX. I am guessing they do not think there is enough of a market to make it worth their while.
I had a look at the case and it seems that the Nillkin one is probably your best option, as the case covers the sides and slightly overlaps on the front-full protector covers the whole front so you may get issues with it.
Have a look for yourself, here is the one I bought (and currently use):
http://www.ebay.com/itm/281856280418
This is the issue, you could risk bubbles and use the spigen or avoid them, live with a rainbow and use another case. It's down to luck, you may not get any bubbles or rainbow depending on which one you use.
The first sentence in your reply is not so clear, you are saying the Nilkin it is the best option although I may still have issues with it?
I ordered the protector you linked to on eBay about a week ago, but it will take a few weeks to get here!
I do have my Nilkin H+ protector here, my Spigen Rugged Armor case, and my OnePlus X arrived about 15 minutes ago
I want to try apply the Nilkin cover right away - I will post picture for others - but what is the best method? I read somewhere on the forum that we should make sure to use the 'x method', but I cannot remember what x is?
The full cover protector covers the whole front, I mean edge to edge, so the case may not fit-it may conflict with the glass. The Nillkin one only covers the display/screen not the side edges/bezels so you will have no issues with the protector and case.
I have never heard of the 'x method' so don't know, but the best method I have used is with tape or alignment stickers (your protector may have came with them). So you carefully align the protector with the display, apply the tape so it stays in place, remove the film and just close the protector (like a book), apply some pressure in the centre and leave it for a few minutes. Oh and make sure there isn't any dust before applying the glass, use a microfibre cloth to clean.
Also, just to clear things up-you may have issues with the full cover glass protector (not Nillkin-I gave the ebay link previously), the only issue with the Nillkin one is that if you botch it, you will have an air gap around the whole glass. Though if your lucky you may not.
I think this is the x method:
Chris.nl said:
I'm happy with it. The glass feels better then the plastic stock one.
Use the 'hinge method' to apply the screenprotector.
Click to expand...
Click to collapse
Though I haven't tried it myself.
Please upload some picture of your result when you are done
Used hinge method, still got the rainbow effect. I tried unhinging it a few times and cleaned both the screen and the protector and places it back on but there was always a rainbox effect - the last time I tried removing it the protector cracked
I was suspicious at the time when I tried installing the Nilkin Screen Protector, the plastic film removable cover of the protector was on the OUTSIDE of the tempered glass!!!!
WTF!
I know it was on the outside, and not the inside, because the holes in the glass for the front ear speaker and front camera would only line up when the film cover was on the outside, that is facing me as I looked down at the phone. This was the first tempered glass screen protector I ever tried to install, so I assumed I must be mistaken and continued trying to install.
From the videos I have looked again, it seems that this film cover should always be on the inside of the protector (before being removed), that is, on the side of the tempered glass that will be touching the screen of the phone?
Thanks, yes that is the method, see my comments on how it did not work and how I think they somehow sent me a screen protector with the film cover on the wrong side.
xx
As you can see the plastic film protector is on the wrong side of the tempered glass, well, if you want the holes for the speaker and camera to line up!
http://i.imgur.com/VJU5LC7.jpg"]http://i.imgur.com/VJU5LC7.jpg
Yeah, the film is on the inside, the side that attaches to the screen, peeling the plastic sheet off exposes the adhesive bit which sticks to the glass. Just saw the pictures, bad luck man. I got through like 3-4 protectors before settling-if that makes you feel better.
Then I am not losing my mind! Did you see the picture I posted?
Amazon are refunding me at least. I hate that I could not apply a protector to the brand new screen.
Like I said before, I have ordered the one you recommended but it will take some weeks to arrive, and I think you said it will not fit with my Spigen Rugged Armor case anyway.
Can you recommend any others and I will order now? I am in Ireland so possible options are Amazon UK or ebay, though I guess I can order from anywhere really.
As this device is relatively new (only a few months old) there are not many variations of protectors available. As far as I am aware there is the Nillkin type which covers the screen only and the full cover which covers the whole front. I got the ebay one in about a week (China to London), I chose standard delivery (its free and faster than economy).
Check the image in my post here: http://forum.xda-developers.com/showpost.php?p=65705849&postcount=37
That is the full cover one, I had an issue and got it replaced, now it only has a slight rainbow-but I can live with it.
TIFU - I did not realise the second smaller hole in the Nilkin tempered glass was for the proximity sensor, the camera has no hole...
Since there is only a thread for the Nillkin cases and tempered glass I thought it would be nice to have some thread for the accessories in general.
Until this day I tried 3 cases, two screen protectors (films) and two tempered glass protectors.
Case No. 1 ) Slim, silicone case http://www.ebay.com/itm/Transparent-Clear-Silicone-Slim-Gel-Case-For-Huawei-Honor-9/112446352466?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 - Very slim and light case made from nice silicone BUT the protection when dropped would be none. It's not made 100% precisely and since it's silicone it doesn't look any good on the back where it creates bubbles. I've ordered this as the first case to have at least some protection. Nice thing is they include free screen protector but the quality isn't very good - doesn't cover the whole display (I'm not talking about edge-to-edge) and there are 2mm gaps on each side and when the display is on it looks terrible. 2/5
Case No. 2) Nillkin Super Frosted http://www.ebay.com/itm/For-HUAWEI-Honor-9-NILLKIN-Super-Frosted-Shield-Hard-Plastic-Back-Covers-Cases-/152596952252?var=&hash=item23877cb4bc:m:mtNLCAV-KRHaAK2TUOYLPTg - very nice case, really sturdy BUT I have few complaints - it's kinda slippery on the sides but this will go away after some use maybe and the bottom side around jack, charging port and speaker is a bit sharp and if you're holding the phone with the little finger on the bottom it't not really comfortable. Besides that it's really nice case for the price but I expected a bit more. But once again for the price it's more than OK. 4/5
Case No. 3) TPU Shockproof case with "carbon" http://www.ebay.com/itm/Luxury-Carbon-Fiber-Slim-Shockproof-Soft-TPU-Back-Case-For-Huawei-Honor-9-Magic/112325496837?ssPageName=STRK%3AMEBIDX%3AIT&var=412748326145&_trksid=p2060353.m2749.l2649 - as you can imagine, there is absolutely no carbon at all, just some kind of "sticker" or what it is. Nevermind, this case is the best of the three. Really nice case made from TPU, sturdy, should have the best drop protection and fits just perfectly. There is a small "rim" around the screen that should protect the screen from scratches when the phone is "face down". 5/5
Screen protector (film) No. 1) Nillkin Super Clear Protective Film - in terms of size the best screen protector I've had. Obviously it's not edge-to-edge but it does cover the whole display with gaps on the edges BUT the display is fully protected so thumbs up for me. In terms of "anti-fingerprint" it's nowhere close to the display or the back but is much better than some noname protector I've got with TPU case. Overall very nice screen protector for free but I'm still waiting for the Nillkin H+ tempered glass and some noname edge-to-edge tempered glass. 4/5
Tempered glass No. 1) Edge-to-edge blue 2.5D tempered glass http://www.ebay.com/itm/9H-2-5D-Full-Cover-Real-Tempered-Glass-Screen-Protective-Film-For-Huawei-honor-9/152593109357?ssPageName=STRK%3AMEBIDX%3AIT&var=452016649496&_trksid=p2060353.m2749.l2649 - really nice tempered glass (2 pcs) for the price. It has the adhesive only on the top, bottom and the sides but the application was very easy and the glass holds on even with any of tested cases. It has some "dots" in the screen area so I got no rainbow effect whatsoever. The blue color is a bit different from the original color od the phone but it's not a problem since you have your phone in a case. Overall for the price pretty good. 4/5
Tempered glass No. 2) Normal tempered glass Caliber (bought in CZE) - not edge-to-edge, doesn't cover the whole screen, gaps on the sides. Overall sh*t. 1/5
Still waiting for the Nillkin H+ tempered glass.
Nilkin Amazing H+ Pro is No Go
Got the 0.2mm H+ Pro. It's cover the display area for like 99%, with-out just about 0.5mm on each side, after all still the best.
BUT. The silicon layer doesn't hold the tempered glass on both sides, looks like the phone display curve started a bit earlier than its needed for the protector.
It doesn't stick to the display, making it looks like ****, with 3mm frame from each side. Top/bottom sides stick OK, all the way to edges.
So Nilkin Amazing H+ Pro is No Go for me.
Well, got it yesterday so I'm still waiting to try it but not sure if wan't to :laugh:
cases
sooooo, I bought these from tvc mall. They were so cheap that I bought three different ones with the intent of disposing of whichever were poor. Thing is, they are all good in their own way. The plain bumper is just very slimline. The rugged looking one is cool as it has a stand in landscape mode, and the wallet is exceptional quality, given the price. All three fit perfectly, but the plain bumper makes the power and volume buttons so much more tactile. The rugged one looks really cheap in silver, perhaps black would have been a good choice. As i wasn't expecting much from the wallet one, I also oredered the nilkin wallet but that hasn't arrived yet.
https://www.tvc-mall.com/details/dr...r-9-auspicious-dragon-black-sku10174840d.html
https://www.tvc-mall.com/details/fo...casing-with-kickstand-black-sku10174919a.html
https://www.tvc-mall.com/details/ma...ot-for-huawei-honor-9-black-sku10175044a.html
https://www.tvc-mall.com/details/ni...se-for-huawei-honor-9-black-sku10174916a.html
I have also ordered the ultimate sheild screen protector, which is edge to edge, in black as I think it will make an excellent contrast to the silver rear of the handset....which wont be visible when the (absolutely necessary) bumper is fitted!
Ultimate sheild screen protector
.... And the ultimate sheild protector turned up. It is excellent. A word of caution, unless this is fitted absolutely perfectly, it will render one or both of the capacitance keys inoperable. This happened to me as i fitted the sheild a fraction of a millimetre to the right. I carefully removed and replaced it with more accuracy.
Here is a pic of the black sheild fitted to my silver H9, and a photo of the plain bumper fitted from my previous post. Svelt but rugged!
After a couple of hours of use I can say that there has been no loss of sensitivity on the screen or capacitive buttons, but on darker details and the blacks, it does look like the screen is behind a sheet of glass. You will know what i mean if you have used a screen protector which bonds over its entirety, whereas this one has a mild adhesive at the top and bottom of the protector, where the bezels are. A small price to pay i think to protect my new device. It is mostly noticeable in bright light, not so much in low light. And I love the new black look of the bezels with the silver fingerprint sensor still visible.
Right, so, some more hours on....the ultimate sheild has begun to show its flaws. Towards the middle of the screen there is now what i can only describe as a "woodgrain" effect. This could be caused by tiny amounts of moisture getting between the screen and protector, which I guess there is nothing to stop that happening. They offered a refund for dissatisfaction so I guess I will be chasing that up. Pfffft. So disappointed.....
Is there a smart cover for it ?!
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
NotoriousNick said:
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
Click to expand...
Click to collapse
Can you upload a photo of the phone with the case applied?! That would be awesome
The nilkin "sparkle series" wallet turned up. Its awful. Unlike the cheap wallet I purchased, which remains closed under magnetism, the nilkin just falls open and feels poorer quality.
The Ipaky bumper with the clear perspex back is, however, very nice. The only caveat, it sits flush with the screen so offers no protection if you decide to place your device screen down.
I'm waiting for the smart cover case, if it didn't come fast, I'll go with a skin.
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
danygold95 said:
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
Click to expand...
Click to collapse
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
PalakMi said:
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
Click to expand...
Click to collapse
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
danygold95 said:
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
Click to expand...
Click to collapse
I didn't test, I will try it once I get my honor 9
PalakMi said:
I didn't test, I will try it once I get my honor 9
Click to expand...
Click to collapse
:good:
If someone else has tried this protective film, please give us a feedback.
Did someone try the Mofi screen protector? According to a review on Aliexpress it has minimal space at both sides.
I've seen ones from ultimate shield, I'm considering getting one.
PalakMi said:
I've seen ones from ultimate shield, I'm considering getting one.
Click to expand...
Click to collapse
Good luck with that. Did you read my earlier post? As the protector does not actually sit on the screen, due to the adhesive around the edges, it is susceptible to the "rainbow effect" which i think is caused by humidity between screen and protector. It seemed to manifest itself after the phone had been in my pocket and warmed up. I don't have an overly sweaty crotch.....
Anyhow, they apologised and promptly sent a replacement and the same happened again.
By all means give it a go and they will refund you without issue.
Yesterday I recieved the SPECK Presidio Grip for my new Google Pixel 2 XL. I thought that you might enjoy some photos and a short review. This review is neither sponsored, nor did I recieve any discount in order to write this review.
Pricing
SPECK lists this product for 44.95 USD. I paid ~10 USDs at an German online retailer who lists the case for ~25 USD and applying an available-to-all discount for new customers. The list price is pretty hefty, the reduced one is a steal.
Retail box
This case comes in the standard SPECK retail box which allows to take a sneak peak at the case without unboxing.
Build quality / Durability / Looks
Unlike the classic glossy CandyShell cases, the Presidio Grip is made of matted plastic with rubber stripes on. This looks nice and makes the phone much more easy to hold. The rubber removes the slippery quality of the phone's material.
This case has a two-layered construction: The outer layer is sturdy plastic while the inner one is soft rubber. The edges and corners have some air-cushion. SPECK promises that the case would resist scratches easily. Since it is only a day old, I cannot tell. But judged by the feel of the product, I tend to believe the promise.
The lid above the USB port is rubber only (without a plastic housing). I believe this to be a weakness as I experienced deformed/broken rubber at the exact same place earlier on other cases. Time will tell.
The lid in combination with the curved glass panel leads to deep ridges which are predestinated to collect lint. It might be necessairy to remove this cases from times to times in order to clean it.
Be aware that this case adds some bulk definitely more than rubber cases. And as the edges are air-cushioned, the device grows in dimensions to a point where a person with smaller hands might have trouble to hold it in a comfortable manner.
Protection
I am quite confident with the protection level: The sturdy outer shell combined with the air cushioned edges and the inner rubber layer might protect the phone from serious drips. The frontside lip is thick enough to protect the screen while dropping on almost flat surfaces and avoids scratches when putting the phone face to the table.
Fitting / Cutouts / Buttons
This case fits like a glove.. All needed cutouts are there. They are located perfectly and are surrounded by rubber to keep lint out of the case.
The buttons are rubber-made and are easy to press. The covered buttons still provide great tactile feedback.
Active Edge
Active Edge is still working with this case put on and not much pressure is needed to activate it.
Verdict
I highly recommend this case: It looks and feels great, provides great protection without adding too much bulk.
Please rate
Enjoyed this review? Do not forget to push the "thx" button!
Have it. Great case must own for my devices.
ademmer said:
Yesterday I recieved the SPECK Presidio Grip for my new Google Pixel 2 XL. I thought that you might enjoy some photos and a short review. This review is neither sponsored, nor did I recieve any discount in order to write this review.
Pricing
SPECK lists this product for 44.95 USD. I paid ~10 USDs at an German online retailer who lists the case for ~25 USD and applying an available-to-all discount for new customers. The list price is pretty hefty, the reduced one is a steal.
Retail box
This case comes in the standard SPECK retail box which allows to take a sneak peak at the case without unboxing.
Build quality / Durability / Looks
Unlike the classic glossy CandyShell cases, the Presidio Grip is made of matted plastic with rubber stripes on. This looks nice and makes the phone much more easy to hold. The rubber removes the slippery quality of the phone's material.
This case has a two-layered construction: The outer layer is sturdy plastic while the inner one is soft rubber. The edges and corners have some air-cushion. SPECK promises that the case would resist scratches easily. Since it is only a day old, I cannot tell. But judged by the feel of the product, I tend to believe the promise.
The lid above the USB port is rubber only (without a plastic housing). I believe this to be a weakness as I experienced deformed/broken rubber at the exact same place earlier on other cases. Time will tell.
The lid in combination with the curved glass panel leads to deep ridges which are predestinated to collect lint. It might be necessairy to remove this cases from times to times in order to clean it.
Be aware that this case adds some bulk definitely more than rubber cases. And as the edges are air-cushioned, the device grows in dimensions to a point where a person with smaller hands might have trouble to hold it in a comfortable manner.
Protection
I am quite confident with the protection level: The sturdy outer shell combined with the air cushioned edges and the inner rubber layer might protect the phone from serious drips. The frontside lip is thick enough to protect the screen while dropping on almost flat surfaces and avoids scratches when putting the phone face to the table.
Fitting / Cutouts / Buttons
This case fits like a glove.. All needed cutouts are there. They are located perfectly and are surrounded by rubber to keep lint out of the case.
The buttons are rubber-made and are easy to press. The covered buttons still provide great tactile feedback.
Active Edge
Active Edge is still working with this case put on and not much pressure is needed to activate it.
Verdict
I highly recommend this case: It looks and feels great, provides great protection without adding too much bulk.
Please rate
Enjoyed this review? Do not forget to push the "thx" button!
Click to expand...
Click to collapse
Thanks for the review. I had this case for the original Pixel XL and noticed the fit became more loose in a pretty short amount of time (like 4 days). I ended up going through 3 of these before I ended up with a Tech21 case instead which has retained its tight, glove like fit for at least 6 months now. Have you noticed this case becomes noticeably more loose over time?
Today was my 5th day of use. I removed and put the case back on several over the last few days. Until now, I haven't noticed any signs of a loosening fit.
Does it play well with tempered screen protectors?
Sent from my Pixel 2 XL using XDA-Developers Legacy app
Don_Perrignon said:
Does it play well with tempered screen protectors?
Click to expand...
Click to collapse
I don't have one but according from the look of it and the available space I'd say yes.
I have the Speck Presidio Show - which is the same case but with a clear back and without the grippy texture there. I love this case. It has a nice beefy front lip more so than the other three cases I have. Definitely not a slim case, but it's not overly thick either. Provides more serious drop protection than most cases as well, without being big like an Otterbox Defender.
pixelsquish said:
I have the Speck Presidio Show - which is the same case but with a clear back and without the grippy texture there. I love this case. It has a nice beefy front lip more so than the other three cases I have. Definitely not a slim case, but it's not overly thick either. Provides more serious drop protection than most cases as well, without being big like an Otterbox Defender.
Click to expand...
Click to collapse
Also have the Speck Presidio on my XL2. Love the case. I'm bad with dropping and this was by far the least slick case. No drops yet. I'm wanting to get a tempured glass to go with but can't decide after tons of readings seems like they are mostly all bad minus maybe the Dome whitestone. Which I'm not sure if it fits with this case and I'll be highly annoyed if I spend 45 and it doesn't. Although from looking at the edges I'd guess it would fit.
Don_Perrignon said:
Does it play well with tempered screen protectors?
Sent from my Pixel 2 XL using XDA-Developers Legacy app
Click to expand...
Click to collapse
I've had the Presidio Grip on my Pixel 2 XL since I got it in November (week of Black Friday). I agree with the reviewer -- fits very well, excellent grip and it certainly appears to offer excellent shock protection -- but it DOES make the phone significantly bulkier.
Re: the question about screen protectors: I have an InvisShield from SG Fresh Idea on the phone, and the Presidio Grip is perfect with that. There's only a tiny bit of clearance between the InvisShield and the Presidio grip, but it's enough so that the case never touches the protector, and therefore doesn't lift the protector at all -- even when I squeeze the side to trigger Google Assistant.
Since it fits the InvisShield perfectly, you can also be confident that it would be fine with the Whitestone Dome Glass, since that's a bit smaller than the InvisShield.
What's the name of the retailer?
ademmer said:
Yesterday I recieved the SPECK Presidio Grip for my new Google Pixel 2 XL. I thought that you might enjoy some photos and a short review. This review is neither sponsored, nor did I recieve any discount in order to write this review.
Pricing
SPECK lists this product for 44.95 USD. I paid ~10 USDs at an German online retailer who lists the case for ~25 USD and applying an available-to-all discount for new customers. The list price is pretty hefty, the reduced one is a steal.
Retail box
This case comes in the standard SPECK retail box which allows to take a sneak peak at the case without unboxing.
Build quality / Durability / Looks
Unlike the classic glossy CandyShell cases, the Presidio Grip is made of matted plastic with rubber stripes on. This looks nice and makes the phone much more easy to hold. The rubber removes the slippery quality of the phone's material.
This case has a two-layered construction: The outer layer is sturdy plastic while the inner one is soft rubber. The edges and corners have some air-cushion. SPECK promises that the case would resist scratches easily. Since it is only a day old, I cannot tell. But judged by the feel of the product, I tend to believe the promise.
The lid above the USB port is rubber only (without a plastic housing). I believe this to be a weakness as I experienced deformed/broken rubber at the exact same place earlier on other cases. Time will tell.
The lid in combination with the curved glass panel leads to deep ridges which are predestinated to collect lint. It might be necessairy to remove this cases from times to times in order to clean it.
Be aware that this case adds some bulk definitely more than rubber cases. And as the edges are air-cushioned, the device grows in dimensions to a point where a person with smaller hands might have trouble to hold it in a comfortable manner.
Protection
I am quite confident with the protection level: The sturdy outer shell combined with the air cushioned edges and the inner rubber layer might protect the phone from serious drips. The frontside lip is thick enough to protect the screen while dropping on almost flat surfaces and avoids scratches when putting the phone face to the table.
Fitting / Cutouts / Buttons
This case fits like a glove.. All needed cutouts are there. They are located perfectly and are surrounded by rubber to keep lint out of the case.
The buttons are rubber-made and are easy to press. The covered buttons still provide great tactile feedback.
Active Edge
Active Edge is still working with this case put on and not much pressure is needed to activate it.
Verdict
I highly recommend this case: It looks and feels great, provides great protection without adding too much bulk.
Please rate
Enjoyed this review? Do not forget to push the "thx" button!
Click to expand...
Click to collapse
what's the name of the German retailer? I'm in the UK so no customs fees...thanks
I had this case as well. I returned it, though, because the grip texture started to peel after a few weeks.
edgeicator said:
I had this case as well. I returned it, though, because the grip texture started to peel after a few weeks.
Click to expand...
Click to collapse
Wow...that's unusual for a Speck case. The Candy Grip has been around for several years, and the Presidio Grip is a similar concept, and they've been incredibly popular case for iPhones and many Android phones for years. I've had a Presidio Grip on my Pixel 2 XL since Thanksgiving -- just about 3 months now -- and use my phone a LOT, so the case is getting handled many times a day, sits in my pocket when not in use (except when on my nightstand charging at night), gets pulled in and out of my pocket dozens of times a day, etc., and -- it's indistinguishable from new.
Most people I know who have had Speck cases over the past 5 years or so have never had issues. I've read a tiny handful of reports online of folks who talk about peeling -- in most of these, it seems they bought online from a reseller, and it's been suggested that these were likely counterfeit Speck cases (apparently pretty common), sold as the real thing. Of course it's possible you have the real thing and it's peeling -- just a pretty rare occurrence -- I'm not challenging your experience -- just wondering if it's possible you had a counterfeit, or if Speck's quality control let a bad batch through. Where did you buy yours?
Same here, no issues with Speck cases! Best protection and grips!!
jonstrong said:
Wow...that's unusual for a Speck case. The Candy Grip has been around for several years, and the Presidio Grip is a similar concept, and they've been incredibly popular case for iPhones and many Android phones for years. I've had a Presidio Grip on my Pixel 2 XL since Thanksgiving -- just about 3 months now -- and use my phone a LOT, so the case is getting handled many times a day, sits in my pocket when not in use (except when on my nightstand charging at night), gets pulled in and out of my pocket dozens of times a day, etc., and -- it's indistinguishable from new.
Most people I know who have had Speck cases over the past 5 years or so have never had issues. I've read a tiny handful of reports online of folks who talk about peeling -- in most of these, it seems they bought online from a reseller, and it's been suggested that these were likely counterfeit Speck cases (apparently pretty common), sold as the real thing. Of course it's possible you have the real thing and it's peeling -- just a pretty rare occurrence -- I'm not challenging your experience -- just wondering if it's possible you had a counterfeit, or if Speck's quality control let a bad batch through. Where did you buy yours?
Click to expand...
Click to collapse
I bought mine from target.com when it was on sale during the holidays. 3 of the smaller, outer strips at the midline of the phone horizontally were peeling for me.
paulbadassbriant said:
what's the name of the German retailer? I'm in the UK so no customs fees...thanks
Click to expand...
Click to collapse
https://www.otto.de/p/speck-hardcas.../?variationId=649310242#variationId=649310242
17 EUR voucher + free delivery for new customers: https://www.otto.de/user/register?entryPoint=loginPage
Makes this case a steak!
edgeicator said:
I had this case as well. I returned it, though, because the grip texture started to peel after a few weeks.
Click to expand...
Click to collapse
Mine's still good as new.