I know this topic has be address many many times and there are still no soluation to the problem.
So.. I want to make a poll to see how many user is experiencing this problem.
I hope to grather enough data to see if it is a hardware problem or Firmware problem so that i can address to O2 regarding this issue.
I love my PDA/phone.. but... this issuse really bugs me cos i used the phone for business and it always happens when a important call arrived... :evil:
Pls, Lets Vote with your honest answer...
Derek
No problems here....
What i've experienced is that sometimes the ringing sound is very quite even though the volume is at maximum. I make a soft reset and everything's back to normal.
NO SOUND
I have also experienced the same. I normally have to do a soft reset to fix the problem. Seems its a firmware issue to me.
One more issue is that we need to disable the power off system setting after 3minutes.
If not, a phone call will be automatically ended after 3 minutes talking.
i have also experienced this problem. i had a important caller call me twice and i didnt hear my phone ring. it was also next to me. luckily, i had my backup phone with me when he tried that line.
agreed that we shouldnt have to soft reset to get back the ring tone functionality. i personally think its a caller id version problem, but thats my opinion cause its easier to fix. i just hope it isnt a firmware problem since i wont hold my breathe on O2 releasing a rom upgrade in my phone version.
im going to try some reg tweaks to see if it will help, once my main pc is up and running (currently moving). i just dont want to go back to an older rom because of a ringing problem. but it IS a big problem for most of us.
ps. sorry about the spelling mistakes and punctuations. im on my pda at a coffee shop.
Yup I have see the no sould on outgoing, no sound on incoming, reset does the trick for me. Also feel that the sound is low in general (even if set to max)
Ha.. i call XDA today in their headoffice in Singapore. The CS guy told me.. they know this issue and say there will be a new (Rom) or patch release very soon.
After seeing the vote result. I believe that the issue is do to software, not hardware.
I have a firend that design such product. he told me that it could be that DSP script is not written well. He said, the Echo Cancelling must be overflow causing the unit to manufunction. and after reset, the overflow will be clear out, so the unit function again.
I hope O2 is really releasing a new patch to fix this issue. If not, i think i am force to go back to my Sony Ericsson P910i or one PDA and one phone option.
i'm glad that O2 recognises the problem and not passing it on to other people. thanks for the information rcbear. glad you took the extra steps get them looking this way.
i hope "soon" means in a waek or two.
same problem
My ringer always works but sometimes, at least every other day. When someone calls me i can not hear them, they can sort of hear me, but the earpiece is dead. A soft reset fix's this problem. Is my issue related to the current issue dicussed in this thread? Thanks
Jeff
I have the problem
But I get it seldom and sporadically.
pda2k (out of the box)
ROM: 1.22.00 WWE
Radio: 1.06.00
Protocol: 1337.38
ExtROM: 1.22.162 WWE
AT&T/Cingular
Re: same problem
jeffro01 said:
My ringer always works but sometimes, at least every other day. When someone calls me i can not hear them, they can sort of hear me, but the earpiece is dead. A soft reset fix's this problem. Is my issue related to the current issue dicussed in this thread? Thanks
Jeff
Click to expand...
Click to collapse
Hi Jeffro01..
Welcome to the club.. :lol:
Derek
I don't seem to have the ring volume problem, but my phone will get into a state where it rings, I answer the phone, but there is no audio. In the six or so times it's happened, I haven't really determined if the caller can hear me. A reboot fixes it.
I can't pin down any one thing I do to cause it to get into this state, but it seems like a software/firmware issue.
I have this problem too.
I had to send my BT headset for repair for two weeks and noticed it did not happen during that time while it started again since I got my BT back.
When it happens (once to twice a week) I soft reset my SPVM2000 and it then is ok.
Also the BT Orange Switzerland patch makes the problem appear less often.
Phone ring problem got me twice today...
Both times, never heard three calls, but the phone still reports them as being missed.
Gotta be a solution for this or I'll be soft resetting every time I finish a call/use.
I had to send my BT headset for repair for two weeks and noticed it did not happen during that time while it started again since I got my BT back.
Click to expand...
Click to collapse
If so I have 2 questions for everyone who has this issue:
1, Do you use a bluetooth headset or any other bluetooth device (gps...)?
2, What is your current bluetooth version and build?
I have Bluetooth build 3900, and I'm using 1.33.
No probleme here
not using BT or WiFi.
Where can I find my BT version?
I don't also have the 3 minutes switch off pb, the PDA function switch off after 3 minutes but the phone remains operational. I often switch the PDA off myself whilst on the phone to save on batteries.
...Hi everyone! (1st post!)...
I get the dead-speaker in calls too...
I took delivery of my first SPV M2000 a couple of weeks ago; it had a few problems, one of which was that the speaker would be dead occassionally when making or answering calls requiring a soft-reset to resolve. I initially thought this might be caused by the device not correctly recognising external hardware had become disconnected - handsfree/BT/car-cradle etc. - but it did seem to be at random.
Orange replaced the device last week; and by day 3 without using any handsfree/cradles etc. and BT and WiFi not even enabled (much less paired/connected); the dead-speaker problem reappeared.
I'm not going to bother chasing Orange about this issue on its own (this device doesn't exhibit any of the other problems I had with my first); as it seems to be a pretty common problem that's going to require a software update to fix. Needless to say when I read that HTC have written a fix I will be on Orange's back to make a fix for their ROMs public. (dreaming?).
Just FYI, both the initial device I was supplied and the replacement have the same software versions (in my sig).
Regards,
Rob.
I circumvented (temporally fixed) the ringtone problem by setting the default ringtone to "None", and also set the phone to vibrate. Then Re-enabled MS Voice Command to announce all incoming calls. The only problem is, the voice isn't loud enough in noisy places, but it does the job in the office or semi noisy environment. I guess this will have to do until a verified fix comes along our way.
I have a problem that more people seem to have, according to the search. I couldn’t find the “audio” tab in my Bluetooth-settings, so that didn’t help me.
The problem is as follows. After 1 day the sound on my compact III mutes, including vibration. Sometimes it's after 12 hours, sometimes after 2 days, there's no distinct pattern to be recognized. Also, it doesn't seem to matter if you use the phone or not, since it sometimes is alright at night and the sound is muted the next morning. This is for all sound-events (warnings, incoming call notifications, messages, mp3 etc), however, you can make a call without any problems and hear what the other person is saying. Once you’ve hard-reset the device everything is back to normal.
It does get annoying however, since I regularly miss calls due to this bug.
I had the same problem on my Vario in the past. So I’m guessing it’s somewhere in the software I use, but apart from Total Commander and TomTom6 I haven’t installed any third-party apps.
Yup i've been having a slight problem with the sound. I thought it was like the endless knackered M500's that orange used to send me which had speaker failure after about 10minuites! (Swear they kept sending me the same 2 faulty phones - I had 5 in 5 days once!) But a play in the bluetooth seems to get it working again.
The other annoying thing is that if you leave the power management at the default settings then occasionally the screen blanks without being able to get the backlight on again - so now I have to manually turn of the screen. Stil aint much of a problem - ive had a normal days use, 2 hours of radio play, bluetooth and wi-fi on all day and still have 35% battery - wehay!
Hopefully there'll be a patch soon to sort out he glitches.
I forgot to mention I had the exact same problem on my mda Vario also. I always thought it was a problem with that specific piece, but apparantly not.
Could it be the vibrate.cab that I'm using to produce vibrations when you use the phonepad? Or should I really do some further research in the bluetooth-department?
Same problem here.
Phone becomes completely silent after 9 hours in standby mode.
I need to reset it to get back sound
Does someone know what is going on here ?
Please advise. Thank you.
I seem to experience no problems the past couple of days (fingers crossed). I used the 'speed up your WM5' tweak where you set the Glyphcache to 32768. After I reduced it to 16something the problems seem to have disappeared.
I noticed that this problem happens when for example email is automatically checked during night. If email comes in (and is not read immediately) the phone will start notifying in background.
Notifications are kept and only a program like "check notifications" will delete them manually. But still if you delete them, the phone then needs a reset
to work properly again.
This is not a memory issue, it has to do with the notifications.
I do not know how to solve it.
Hi all guy's,
first to trown my phone from my windows i want ask how many of you have my same problem and if it is related to an hardware or software issue.
Sometime without a resonable reason my phone stop producing sound when i making screen selection even if the audible selection is selected.
There are two methods for solve this problems, the first one is plugin and unplugging the phone from the usb connector.
The second one is deactivate during a call the speaker option that is auto enabled when this problem occur.
I already sended the phone to the samsung once for this problem and they gave me back it after 15 DAYS (beloved and hated apple gave me back a new iphone in 3 days when i sended it to them for a problem) and the phone worked good for about 2 weeks, now i have the same problem as i had and i don't know what to do :\
I think the problem is not related to the firmware version becouse the first time i had this problem i changed the firmwares many times trying to solve it by myself but i couldn't solve it.
What can i do? Is there someone with my same problem?
Sorry for my english and thx for the answears
i have another related problem... sometime an image talk more than 1000 worlds
http://yfrog.com/nehpim1091j
Howdy pards!
Got a rooted E4GT running Supernexus for about the last 2 months give or take.
All has been well until about 2 weeks ago (thereabouts), I started noticing my callers and I could not hear each other for about the first 10 secs of the call.
The delay is just long enough that it usually convinces caller they should hang up .
It happens a lot but not every time. I'd say half my calls.
My phone is integrated with Google Voice. That has had some delays but usually just small latencies (coudld still hear) and I haven't had that problem in a good year or two now.
Outgoing calls are fine usually. No delays like this.
Some things I have wondered is if it could be the PRL that needs to be updated?
And if it is, should try an update? Is that safe when running an AOSP ROM? (Doesn't seem like it would be so I haven't.)
(Corollary question: are there other updates that people typically do that folks like me should avoid?)
Attaching my Hardware Info screenshot.
Any ideas?
I updated to 5.1.1 and all seemed well, but today, my phone all of a sudden is calling people on its own. In one case I was speaking to someone on the speaker phone and watching the screen and it began calling a phone number while I the call was in progress. I am not sure that it began with the update, as I have possibly seen this before, but I could never pin it down. Has anyone seen this and short of a factory reset, are there any suggestions? Thanks.