Develop Bugs

Wifi and Bluetooth not working Verizon Galaxy Note 4

I have a used Verizon Galaxy Note 4.
I can't turn on the WIFI or the Bluetooth.
Nothing happens when you tap the buttons for either of these.
So far, I opened it up and detached and reattached the 2 cables for wifi and Bluetooth . This did not resolve the problem.
It also appeared to have a custom firmware on it so I used odin and installed the latest original firmware but it did not solve the problem.
I was wondering if it could be the charging port board or the Bluetooth and wifi cables but I have read that some people had to swap the main board instead.
A couple of other unusual things,
If I go to settings and tap "System Updates" it says Software update is temporarily unavailable "
Also, if I boot to recovery mode it says "Installing system update" and then says "No command" and finally goes to the menu.

What bootloader are you on? Also what is your baseband and currently installed android version? What firmware did you flash? Is your carrier Verizon?

I couldn't log back in here for some reason so I had to use a different account.
Yes it is Verizon
Baseband: N910VVRS2CQC1
Android Version: 6.0.1
Firmware: MMB29M.N910VVRU2CQC1
In bootloader it says:
Odin Mode: (High Speed)
Product Name: SM-N910V
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START

JediYeti said:
I couldn't log back in here for some reason so I had to use a different account.
Yes it is Verizon
Baseband: N910VVRS2CQC1
Android Version: 6.0.1
Firmware: MMB29M.N910VVRU2CQC1
In bootloader it says:
Odin Mode: (High Speed)
Product Name: SM-N910V
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Click to expand...
Click to collapse
If you have data working, can you download this from the playstore https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en and after you install and open it, scroll over to firmware and tell me what it says there. That will tell you what bootloader you are on. You should be on the CPD1 bootloader.

dhplap said:
If you have data working, can you download this from the playstore https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en and after you install and open it, scroll over to firmware and tell me what it says there. That will tell you what bootloader you are on. You should be on the CPD1 bootloader.
Click to expand...
Click to collapse
I thought we got an update after pd1 that could he could potentially be on . I realize the bootloader didn't change but it may have gotten renamed to the appropriate firmware . That looks right (his device info) if it were stock updated

mojoswagger1980 said:
I thought we got an update after pd1 that could he could potentially be on . I realize the bootloader didn't change but it may have gotten renamed to the appropriate firmware . That looks right (his device info) if it were stock updated
Click to expand...
Click to collapse
The information he provided doesn't show what bootloader he is on though.

Yetisimo said:
I have a used Verizon Galaxy Note 4.
I can't turn on the WIFI or the Bluetooth.
Nothing happens when you tap the buttons for either of these.
So far, I opened it up and detached and reattached the 2 cables for wifi and Bluetooth . This did not resolve the problem.
It also appeared to have a custom firmware on it so I used odin and installed the latest original firmware but it did not solve the problem.
I was wondering if it could be the charging port board or the Bluetooth and wifi cables but I have read that some people had to swap the main board instead.
A couple of other unusual things,
If I go to settings and tap "System Updates" it says Software update is temporarily unavailable "
Also, if I boot to recovery mode it says "Installing system update" and then says "No command" and finally goes to the menu.
Click to expand...
Click to collapse
Hey man I m not sure how far you've gone but I'd have to suggest a complete factory reset then wipe from recovery then reinstall via Odin (latest firmware down to bpa1 should all be usable if you plan on rooting you need to go back anyway . Either way your info is correct something is wrong with your radio flash either pd1 or bpa1 just to be certain the bug isn't inherint to your current firmware

Thanks. It says Bootloader version N910VVRU2CQC1
Some other things while I'm looking.
PDA VERSION N910VVRU2CQC1 / N910VVRU2CQC1_QC4
CSC VERSION N910VVZW2CQC1
BASEBAND N910VVRS2CQ1
Kernel Version 3.10.40-8025465
[email protected] #1
32 BIT
ROOT EXISTENCE No

JediYeti said:
Thanks. It says Bootloader version N910VVRU2CQC1
Some other things while I'm looking.
PDA VERSION N910VVRU2CQC1 / N910VVRU2CQC1_QC4
CSC VERSION N910VVZW2CQC1
BASEBAND N910VVRS2CQ1
Kernel Version 3.10.40-8025465
[email protected] #1
32 BIT
ROOT EXISTENCE No
Click to expand...
Click to collapse
Well that looks right. I would take mojoswagger1980's advice.

I think that's what I already did unless I'm missing something. I did factory reset and wipe and installed the aforementioned firmware with odin.
I'm new to this.
Are you saying I missed something?
should i try again with a different firmware?

JediYeti said:
I think that's what I already did unless I'm missing something. I did factory reset and wipe and installed the aforementioned firmware with odin.
I'm new to this.
Are you saying I missed something?
should i try again with a different firmware?
Click to expand...
Click to collapse
Could you provide the link of the firmware that you flashed with Odin?

Ok.
Please note that this problem existed before I updated firmware.
I was hoping that updating firmware would fix it.
---------- Post added at 01:21 AM ---------- Previous post was at 01:19 AM ----------
The link was
https://www.androidfilehost.com/?fid=745425885120726202

JediYeti said:
Ok.
Please note that this problem existed before I updated firmware.
I was hoping that updating firmware would fix it.
---------- Post added at 01:21 AM ---------- Previous post was at 01:19 AM ----------
The link was
https://www.androidfilehost.com/?fid=745425885120726202
Click to expand...
Click to collapse
Can I get the link to the thread that file came from? I checked Paul Pizz's threads and didn't find that exact download file. It seems like that should have worked. Might have been a bad download. I would try again and if that doesn't work I would Odin back to bpa1. That's lollipop but that would give you a fresh start so you could unlock your bootloader if you decided to. That's just my opinion though.

Could you send me links to good files please?

JediYeti said:
Could you send me links to good files please?
Click to expand...
Click to collapse
Try this with Odin https://www.androidfilehost.com/?fid=529152257862721079

I tried it but it didn't fix it. Maybe a hardware problem.

JediYeti said:
I tried it but it didn't fix it. Maybe a hardware problem.
Click to expand...
Click to collapse
are you sure its a verizon note 4? its easy to flash other carriers ROM . please post a pic of your devices about phone screen(s) so we have an idea what firmware we r talking about . you do lose WiFi f you take safe upgrade maybe you got a phone only partially updated . need more info

Can I downgrade from 7.0 to 6.0.1?

I tried with Odin but it failed. I read a thread on here saying it is possible.

yea , you can.Just download the last BL from nougat and rest files of marshmallow except BL and flash them in odin

And that works? No issues with IMEI etc?

slugger09 said:
And that works? No issues with IMEI etc?
Click to expand...
Click to collapse
Yes, it works

Your right it does work bar one small issue. No cell reception

slugger09 said:
Your right it does work bar one small issue. No cell reception
Click to expand...
Click to collapse
Just download the latest MM firmware form sammobile and it will work.

slugger09 said:
Your right it does work bar one small issue. No cell reception
Click to expand...
Click to collapse
Don't downgrade modem. The CP-part of the firmware.

I am trying to downgrade older version of 7.0. I am using laters BL but it's not working. I am facing with ''sw rev check fail device 4 binary 2'' error. What should I have to do?
I am taking BL from Russia rom and CSC, AP, CP from United Arab Emirates. Is this cause problem?

Castle Of Glass said:
I am trying to downgrade older version of 7.0. I am using laters BL but it's not working. I am facing with ''sw rev check fail device 4 binary 2'' error. What should I have to do?
I am taking BL from Russia rom and CSC, AP, CP from United Arab Emirates. Is this cause problem?
Click to expand...
Click to collapse
The part of "Device 4" is telling you that the bootloader is type 4, in order to make any flash work, you gotta use a rom with "XXU4" in the BL section and no, you can not downgrade the bootloader to match the "Binary 2"
The part of "Binary 2" is telling you that the BL that you are trying to install is type 2 and you need a type 4 to match with your device.

and it works yet?
I tried to go back to 6.0 but it didnt work

cant bring back to factory/ get out of factory binary

Samsung Galaxy S8+
Version Info
Model SM-G955U [SS]
PDA FA70_G955UQU4ARE1
PHONE G955USQU4CRE1
P_S/N UNKNOWN
H/W REV1.0
CAL.ID 2017.04.18
UN (NOT SURE IF TO GIVE THIS NUMBER)
MEMORY 64GB
Ran ODIN v3.12.7 and rom that came with it. now stuck in Factory Binary, trying to flash back to factory, any help? Ive tried several roms and either get fails. or sometimes gets abl.elf
in upload mode
[ UPLOAD MODE ]
User press powerkey 7 sec (it does nothing)
--------------------
DDR Vendor :Samsung
SOC_HW_REVISION : 2.1
last_ns :0xff
Generaring Summary
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>Trust2one
>>Hypervisor
>>APSS
>>MOdem
Done!
in Downloading custom rom
CARRIER: vzw
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS : oFFICIAL
FRP LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B4(2,1,1,1,1) K3 S4
SECURE DOWNLOAD: ENABLE
DID : 205E53BE31CB
AFTER RUNNING ODIN AND FAILING THERES ANEW RED LINE
SW REV CHECK FAIL : [ABL]FUSED 4 > BINARY 1

I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.

Smithfolk4 said:
I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.
Click to expand...
Click to collapse
so could i just google a "verison 4 BL for s8+" or something along those lines?

Kyles89 said:
so could i just google a "verison 4 BL for s8+" or something along those lines?
Click to expand...
Click to collapse
Yes. There are a lot of software versions available. If you use Updato you can search by model number and service provider (listed as region on Updato. I was able to find one with a version 4 bootloader. Similar to your version, but CRE9 at the end. It is an oreo version. Your phone is a model SM-G-955U when you search there. It might take a long time to download. I have sometimes had luck speeding things up by trying to restart the download. Sometimes it just takes a long time. Be careful when you are flashing if you have any desire to go back to a previous version. I am not sure of the limitations.
Another thing you could try that might be easier for you is to go to the JRKruse ROM thread here - https://forum.xda-developers.com/verizon-galaxy-s8+/development/rom-t3771206 and use the instructions he has there to install the ROM. There is another rooted ROM that he has that may also work for you. He has instructions on what to do.

Hello, my galaxy s8 is stuck in rpmb provisioned and its boot looping, I can get to download mode, it doesn't say things such as fuse blown etc. How can I get out of the boot loop? Help is appreciated.

Did you find a fix? Im having a very similar problem. I don't see any stock roms with a v4 bootloader. The most recent seems to be a v3.

Fixed it the way Smithfolk said. I was using the combination rom FA70_G955USQU4ARE1 with a V4 bootloader. I used odin v3.13.1 and flashed verizion G955USQU4CRE9 from Sammobile including the bootloader and it fixed my phone.

Having issue flashing with Samsung S9 SM-G960F

Long story short I rooted my phone with Magisk, fully unrooted then me being stupid I went into settings and turned off OEM Unlock it had to wipe the device since then had this FRP lock, Now i was told only way to fix this is to flash with the default software since this i've run into problems with ODIN when loading the files into the phone it gets stuck on recover.img on Odin and on the phone it says sw rev check fail bootloader device 2 binary 2.
If you guys can help fix I would be so happy
Thank you

gilescore said:
Long story short I rooted my phone with Magisk, fully unrooted then me being stupid I went into settings and turned off OEM Unlock it had to wipe the device since then had this FRP lock, Now i was told only way to fix this is to flash with the default software since this i've run into problems with ODIN when loading the files into the phone it gets stuck on recover.img on Odin and on the phone it says sw rev check fail bootloader device 2 binary 2.
If you guys can help fix I would be so happy
Thank you
Click to expand...
Click to collapse
Make sure you're not trying to downgrade the bootloader, has to be the same version or higher that you're flashing
Download mode look for BL:1 or 2 or 3, and pick a firmware with that number or higher as shown below
G960FXXU2BRJ3 << Version 2

Thanks man thats fixed it
*Detection* said:
Make sure you're not trying to downgrade the bootloader, has to be the same version or higher that you're flashing
Download mode look for BL:1 or 2 or 3, and pick a firmware with that number or higher as shown below
G960FXXU2BRJ3 << Version 2
Click to expand...
Click to collapse
Thank you so much

gilescore said:
Thank you so much
Click to expand...
Click to collapse
No probs :good:

Error when installing stock OS: SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 7. BINARY: 6

Recently I rooted my S9 and installed Lineage OS but I didnt like it and decided to swap back to the stock OS. I used Frija to get the .tar.md5 files for Odin but once I select all the files and hit start the log in Odin loads up to system.img then stops and I get the SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 7. BINARY: 6 error on my phone. Any idea on how to fix this? I'd really appreciate some help as I'm going to be travelling soon and I need my phone for it and I'd prefer not to use Lineage OS. Thanks in advance.

Do you have an At&t branded phone? SM-G960U?
I am having a very similar problem. A customer came in and was having issues with device. I told them to back up, wipe, and update device. That didn't work so I tried a full flash with ODIN. Now I can't get the phone to boot at all and it says, "Secure Check Fail : Modem" and "Unauthorized software visit nearest AT&T blah, blah,..)
I think it is because AT&T has pushed out the latest update(OCT. 18th), but the Odin files are not out yet. According to:
https://www.att.com/devicehowto/tutorial.html#!/stepbystep/id/stepbystep_KM1253489?make=Samsung&model=SamsungG965U
G960USQS7CSI5 is the latest FW. If you google it, there are only four results.

Yep, the problem was the phone was on the latest FW. Newer firmware was just uploaded a few days ago.
I flashed:
G960USQU7CSJ2_G960UOYN7CSJ2_CHA
and now I'm booting again.
Your problem is that your firmware is too old. Basically, you are trying to downgrade your FW. The phone is basically saying, "Hey, I have bootloader 7, I won't let you install something lower than that."

ma777 said:
Your problem is that your firmware is too old. Basically, you are trying to downgrade your FW. The phone is basically saying, "Hey, I have bootloader 7, I won't let you install something lower than that."
Click to expand...
Click to collapse
^^^^ this ^^^^
the Odin error is telling you that youre trying to flash a revision of the bootloader than was last installed on the phone. to to sammobile.com/fimrwares and get the one with the correct bootloader for your specific phone and flash that.
also download the firmware with the frija tool or samfirm. trust me, its literallt 5x faster than a direct download from the site. The 5 min it takes to get samfirm up and running is worth it, believe me on that.

I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted

Nightfox619 said:
I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted
Click to expand...
Click to collapse
got no help here? how so? I see you got the info you needed to get the phone back up and running properly via asking about it here.
with regard to the bootloader version of 7 in your case, it is a very known thing that whatever bootloader version youre on, you cant go backwards from.
In either event, im very glad that you got it up and running!!

Youdoofus said:
got no help here? how so? I see you got the info you needed to get the phone back up and running properly via asking about it here.
with regard to the bootloader version of 7 in your case, it is a very known thing that whatever bootloader version youre on, you cant go backwards from.
In either event, im very glad that you got it up and running!!
Click to expand...
Click to collapse
Getting no help was meant I hadn't Posted asking Questions, I read everything ya'll put up and I was able to do it on my own without continuing to ask, so Yeah I did get help here but not by asking only reading what is available

downgrade samsung sm-g570m
Nightfox619 said:
I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted
Click to expand...
Click to collapse
hi Nightfox619.! I have a samsung sm-g570m and I trying to downgrade to binary 2 when I flash with odin it give me this error message "sw rev check fail bootloader device 7 binary 3" any idea how can I downgrade .??

pol1345 said:
hi Nightfox619.! I have a samsung sm-g570m and I trying to downgrade to binary 2 when I flash with odin it give me this error message "sw rev check fail bootloader device 7 binary 3" any idea how can I downgrade .??
Click to expand...
Click to collapse
Ok so first you should post I'm your devices threads but that aside. Here's what's up. You can't downgrade the error shown is saying your device is on a bit 7 binary. Your trying to flash a bit 3 binary which isn't even 2 you need to find your respective firmware in a bit 7 or higher.

TheMadScientist said:
Ok so first you should post I'm your devices threads but that aside. Here's what's up. You can't downgrade the error shown is saying your device is on a bit 7 binary. Your trying to flash a bit 3 binary which isn't even 2 you need to find your respective firmware in a bit 7 or higher.
Click to expand...
Click to collapse
thanks 4 answering bro and sorry 4 using this thread.! so definitely I can't downgrade 2 a lower binary than 7..?

pol1345 said:
thanks 4 answering bro and sorry 4 using this thread.! so definitely I can't downgrade 2 a lower binary than 7..?
Click to expand...
Click to collapse
Like 99.9%. That's what that error is. The bootloader is blocking downgrade

pol1345 said:
thanks 4 answering bro and sorry 4 using this thread.! so definitely I can't downgrade 2 a lower binary than 7..?
Click to expand...
Click to collapse
yes, if you get a firmware version matching the one last installed on your device, itll go right thru and boot just fine. Goodlock is finally working on all modules for A10 as well. Maybe we will see more development occur with this shutdown going on. Let us know if you run into any trouble, the error you were getting is totally resolvable!

at the end I give up on it..! my internet 2 slow 4 go downloading & trying rom after rom.! i am from venezuela.

Nightfox619 said:
I may be new to this, But I just Flashed a SM-g960u, That Had Bootloader7 locked on it, When I would go into download mode I would see FRP ON, and this Firmware G960USQU7CSK6. So I downloaded a Combination Firmware file. Used Odin Patched, Flashed it there is a guide out there. Restarted into the Settings, Turned on Developer mode, USB Debugging, and Was able to change OEM-Software install. Then I was able to load this phone after, with G960USQS7CSI5 with ease My first flash and I had to bypass a FRP and a Bootloader lock. Now I should be able to flash this to the U1 version unlocked and be good! If you need any help I did just do this last night I can guide you in the right dirrection. Litterally I had no help from here as in asking questions I am pretty savy. So you need to make sure your Version has the "7" in the Same Place. Also after I enabled those things while in the phone before Flashing it I chose the Factory Reset from within, SO it erashed EVERYTHING except Download Mode and the Combination Firm Loaded. Meaning I should have been able to flash to anything I wanted
Click to expand...
Click to collapse
I have S20+ running Android 11 with U7 Binary. I tried downgrading to Androi 10 which has Binary U5. Now I have downloaded the Binary U5 file. But in some video, he is telling that you should download the Binary File with the same number as it is currently installed in your phone, which in my case is U7. So? Am I supposed to download U7 Combination Binary file and flash it in order to downgrade to Android 10
OR
Should I flash the U5 Combination File and flash the Android 10 AP, CSC, BL, HOME ???

Someone has Combination file to G960F with bootloader SF (Version 15)?