I got few issues with my note 10 plus. If anyone can answer I will grateful
1. ''lift to wake up'' function sometimes works and sometime it doesnt.
2. 'smart stay' option sometimes doesnt work and the screen turns off
3, i ran gyroscope test on *#0*# and i got few fails. most of the times, i get pass. sometimes i get fail. is it normal?
please let me know
thanks
Well, it is not normal
Related
Noticed recently that When a phone call is in progress, the screen will go black no matter what and to get it to come back i have to manual hit the top power button.
I first noticed it with energy rom. When autobacklight was enabled, their was no getting back to screen at all. Disabling autobacklight at least allowed me to get the screen back after clicking the power button.
I switched to core cell rom and noticed the same issue, however, i can manually turn the screen on again even if autobacklight is enabled.
I have no further problems with the proximity sensor, just this one.
Is their perhaps some sort of proximity app that i could use to diagnose whether this is a hardware problem or software problem?
Ok, I had a similar issue, where the phone screen would turn off as soon as the "send" button was pressed, and the only way to turn it back on was either hanging up, or waiting till it felt like coming back on.
My proximity sensor was stuck "on". I could see the sensor status in the registry (don't remember offhand the reg entry, but it's a live reading of the sensor, 1 or 0). I installed "Proximity Sensor for Screen Off v0.2" from http://forum.xda-developers.com/showthread.php?t=624206
That was a mistake on my part, though... then the screen wouldn't come back on! It took some real finagling to get the screen on.
To fix it (temporary? permanent? dunno...) I waved a small neodymium magnet over the sensor (near the ear speaker). I have no clue why that worked. I don't know why it stopped. I *definitely* don't know if that's the issue you are having. But it's worth a shot
I've never had this issue after many different iterations of the Energy ROM.
Do you run Task29 when you flash ROMs?
Yeah i always task29. I don't believe it is the rom since i have tried another rom and the problem persisted. I tried the magnet idea but it didn't work. It was a refrigerator magnet though so i didn't expect it to. Anything else that requires the prox. sensor to work, has no problems and that is why this is weird to me.
hi every one,
My phone proximity sensor are not working i checked in the settings it's Turn On But Still The Are Not workings,... And Even i Install os Many Times Through Odin Because Of This Problem But No use ..
Please Help me Is This A Hardware issue
There's a way to check if it's malfunctioning. Start your phone, and head to the dialer, and type *#0*#, and a screen should come up with all sorts of buttons on it. Tap "Sensor" in the middle, and you should have a screen with a spinny thing. If you hold your hand near the proximity sensor, the white background should turn green and your phone should vibrate. If it doesn't do that, your sensor may be malfunctioning. To exit it, double-tap the back button until it exits.
what rom have you?
kg2811 said:
what rom have you?
Click to expand...
Click to collapse
If he reflaah stock and it doesnt solve it cant be a 'rom' problem
Sent from my iPhone (sometimes my codina)
thak u for your help , i had done the thing which you had tell bought it is on white screen it doesnot turn green ... so this is a hardware issue ...
Has anyone else had a screen rotation issue on their Note 4?
In almost all apps, rotating from portrait to landscape or landscape to portrait has a very long delay. Usually at least 10 seconds, and sometimes not at all unless I tap the phone on a hard surface, and then it rotates.
That might suggest a sensor problem, except for 2 things that do work:
1) In camera mode, the buttons rotate instantly when I rotate the phone
2) In GPS status, which indicates phone orientation, it registers the screen rotation as roll in the pitch/roll display, although the GPS status screen does not rotate correctly either.
These seem to confirm that the actual sensor is working ok.
I've tried safe mode, clearing cache, closing all open apps. Nothing changes in the behavior. I also tried turning off SmartStay, and changing display mode.
Some hits I found suggested turning off "smart screen rotation" on the S5, but that setting doesn't seem to exist on the Note 4.
Has anyone had this problem and found a solution?
Glen
and sometimes not at all unless I tap the phone on a hard surface, and then it rotates.
Click to expand...
Click to collapse
This is like a dead giveaway for a hardware problem.
Wow, 10 seconds is a looooonnnggg time for a screen rotation. I've never experienced this on my Note 4, so the only thing I can think of is talking to your carrier or Samsung themselves to ask about it. Sounds like a hardware failure to me.
Yeah, that does make it seem like a hardware problem. But like I said, the camera buttons rotate instantly every single time, with zero lag. That would seem to say the hardware is working, unless the camera uses a different sensor for rotation than the rest of the UI.
Also, my wife has the same issue with her Note 4. We got them at the same time, so maybe it's a problem with that batch.
Since we both have it, it seemed like it could be caused by some app we both have, but I thought booting in Safe Mode would eliminate that, as only stock apps run in Safe Mode.
I guess I could wipe the device completely and see if it resolves. If not, I'll take it in as a hardware problem.
After a full wipe and cache clear, it still has the same problem. I called Verizon, and they are shipping out a replacement phone.
Glen
Hi everybody ! I have a htc one m9 and for a week already, I have a problem with the proximity sensor. In fact, when my phone stays idle for hours and I try to unlock it with the double tap, it does not. Even when I make a call, the screen does not turn off. But when I restart the phone, it walks again and stops walking again. Can someone help me solve the problem? Thank you
Hello to everyone,
I bought my OP9 pro 2 month ago, and I loved it since first day, but there are some bugs that I really hate!!
When I finish a call or when I finish to hear a voice message on Whatsapp, the brightness goes down, without I touch anything!
In last days I find another annoying bug, sometimes when i put off the phone from the pocket, the pocket mode remain activated, also if I turn my OP, also if I unlock the smartphone... These two bugs are getting me crazy!
Can anyone help me or I have just wait some software update from OnePlus?
xandrew92 said:
Hello to everyone,
I bought my OP9 pro 2 month ago, and I loved it since first day, but there are some bugs that I really hate!!
When I finish a call or when I finish to hear a voice message on Whatsapp, the brightness goes down, without I touch anything!
In last days I find another annoying bug, sometimes when i put off the phone from the pocket, the pocket mode remain activated, also if I turn my OP, also if I unlock the smartphone... These two bugs are getting me crazy!
Can anyone help me or I have just wait some software update from OnePlus?
Click to expand...
Click to collapse
I've exactly same bugs on my OP 9 Pro , sometimes brightness goes down by itself and without touching it, i've always automatic brightness switched off! Then taking it out from Pocket with Pocvket Mode switched off, i find apk opened by themselves, so a total mess!
brunochka said:
I've exactly same bugs on my OP 9 Pro , sometimes brightness goes down by itself and without touching it, i've always automatic brightness switched off! Then taking it out from Pocket with Pocvket Mode switched off, i find apk opened by themselves, so a total mess!
Click to expand...
Click to collapse
Yes! The same for me! I'm rally freaking out! And Oneplus doesn't care about these bugs!
I had the same problems, but interestingly I face it only when my Camera and Mic is turned off.
for me it was dirt an pocket lent, the sensor is very sensitive for some reason so when ever i get that problem I wipe it and it works flawlessly for the next few days until it needs to be done again
Same here, sometimes I can't even turn on the screen after a call...
awsan said:
for me it was dirt an pocket lent, the sensor is very sensitive for some reason so when ever i get that problem I wipe it and it works flawlessly for the next few days until it needs to be done again
Click to expand...
Click to collapse
I don't think so, I've already tried to wipe it, but nothing changed! I have this problem since first day... I thought they resolve it with an update, but after 4 months I'm still waiting
Hello. There is a solution to the problem with the proximity sensor. You go to the dialer enter *#808#, looking for "Device dubbing* and there are "proximity sensor test", tap and choose "infrared proximity calibration". You calibrate the sensor. it should help you. You can also calibrate other problem sensors. Try it with a brightness sensor too
020982 said:
Hello. There is a solution to the problem with the proximity sensor. You go to the dialer enter *#808#, looking for "Device dubbing* and there are "proximity sensor test", tap and choose "infrared proximity calibration". You calibrate the sensor. it should help you. You can also calibrate other problem sensors. Try it with a brightness sensor too
Click to expand...
Click to collapse
Can't use *#808#