Related
*EDIT* This appears to only be working for people with NON-unlimited data plans. I apologize for the inconvenience...
Saw this over in the AT&T subforum, originally posted by @ExTREmE99 , just reposting here.
This will disable the carrier check on your Verizon G4 and allow you to use the native WiFi tether - no root needed!
1. Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
2. Enable USB debugging under Settings -> Developer options
3. Connect the device with a USB cable to a computer with the Android SDK platform tools installed
4. Start an adb shell: adb shell
5. In the adb shell, run these commands one by one:
settings put global tether_dun_required 0
settings put system tether_entitlement_check_state 0
reboot
When your phone comes back up you will have a fully functional native WiFi tether
i must be doing something wrong because i still get the "you need a subscription" popup
Worked for me, thanks! Needed this a few days ago and couldn't use it n was like "F***, wish I had root" hahaha. Oh and also shouldn't this be posted in General?
jrc27 said:
i must be doing something wrong because i still get the "you need a subscription" popup
Click to expand...
Click to collapse
Same here, did I do this right?
Code:
$ adb shell
[email protected]:/ $ settings put global tether_dun_required 0
[email protected]:/ $ settings put system tether_entitlement_check_state 0
[email protected]:/ $ reboot
Congobongo said:
Same here, did I do this right?
Code:
$ adb shell
[email protected]:/ $ settings put global tether_dun_required 0
[email protected]:/ $ settings put system tether_entitlement_check_state 0
[email protected]:/ $ reboot
Click to expand...
Click to collapse
when do you see the subscription message?
try typing:
adb devices
you should see a string of characters listing your device. if it shows no device, then you need to double check that you have your device drivers installed
Tomyk89 said:
when do you see the subscription message?
try typing:
adb devices
you should see a string of characters listing your device. if it shows no device, then you need to double check that you have your device drivers installed
Click to expand...
Click to collapse
I see it after i reboot and try using the hotspot app
jrc27 said:
I see it after i reboot and try using the hotspot app
Click to expand...
Click to collapse
don't use the hotspot app - in fact, disable that one.
You want to use the built in functionality to tether (not technically an app)
Go to settings, More (under wireless networks), then "Mobile Hotspot". You can setup your SSID and password in there. Also, you can create a shortcut in your notification bar by scrolling over to the right side, clicking edit, then checking the box next to "Mobile Hotspot"
Hope that helps.
Tomyk89 said:
don't use the hotspot app - in fact, disable that one.
You want to use the built in functionality to tether (not technically an app)
Go to settings, More (under wireless networks), then "Mobile Hotspot". You can setup your SSID and password in there. Also, you can create a shortcut in your notification bar by scrolling over to the right side, clicking edit, then checking the box next to "Mobile Hotspot"
Hope that helps.
Click to expand...
Click to collapse
I can't even find the damn app to disable it.
I tried as you suggested, going in through the settings and i still get the verizon C*ckblock...
jrc27 said:
I can't even find the damn app to disable it.
I tried as you suggested, going in through the settings and i still get the verizon C*ckblock...
Click to expand...
Click to collapse
Could you try disabling the verizon hotspot app? Mine was disabled way before I discovered this so I may need to add this step to the instructions. you may want to go through the steps one more time after that to ensure everything is set correctly. Don't forget to restart either. It works great on mine so it should for yours as well - unless you took the update a week ago?
Let me know - Thanks!
Tomyk89 said:
Could you try disabling the verizon hotspot app? Mine was disabled way before I discovered this so I may need to add this step to the instructions. you may want to go through the steps one more time after that to ensure everything is set correctly. Don't forget to restart either. It works great on mine so it should for yours as well - unless you took the update a week ago?
Let me know - Thanks!
Click to expand...
Click to collapse
I've been very careful not to take the update. Is the hot spot app have a weird name or something? I can't seem to find it in the app manager or using rom toolbox
jrc27 said:
I've been very careful not to take the update. Is the hot spot app have a weird name or something? I can't seem to find it in the app manager or using rom toolbox
Click to expand...
Click to collapse
hmmm i think I'm confused. My Hotspot app is apparently still in my app drawer. When i click on it it just takes me to the native hotspot functionality.
Honestly I'd attempt to run those commands again. It would help if you took a screen shot of the command prompt window after running all of the commands. After each command it should pause for a second or two then jump to the next line with no errors or responses.
Is your USB debugging on? Also, are you in MTP or PTP USB mode when plugged into your PC?
jrc27 said:
i must be doing something wrong because i still get the "you need a subscription" popup
Click to expand...
Click to collapse
Should it be? I assumed stuff like this went under the Help section since it was helping people. Maybe I'm wrong. If a MOD would like to correct me and maybe move the thread, feel free.
Tomyk89 said:
hmmm i think I'm confused. My Hotspot app is apparently still in my app drawer. When i click on it it just takes me to the native hotspot functionality.
Honestly I'd attempt to run those commands again. It would help if you took a screen shot of the command prompt window after running all of the commands. After each command it should pause for a second or two then jump to the next line with no errors or responses.
Is your USB debugging on? Also, are you in MTP or PTP USB mode when plugged into your PC?
Click to expand...
Click to collapse
Heading to bed...I'll give it another go in the morning
Thanks again for the help, i appreciate it!
jrc27 said:
Heading to bed...I'll give it another go in the morning
Thanks again for the help, i appreciate it!
Click to expand...
Click to collapse
no problem dude. try some of my suggestions tomorrow and get back to me. feel free to PM and we can post the final solution up here as to not fill the the thread up with troubleshooting.
No Go...
Tried multiple times and could not get it to work. adb looked successful but after reboot I still get a subscription check.
joebrady119 said:
Tried multiple times and could not get it to work. adb looked successful but after reboot I still get a subscription check.
Click to expand...
Click to collapse
have you taken the latest OTA update?
Tomyk89 said:
have you taken the latest OTA update?
Click to expand...
Click to collapse
Have not taken any OTA.
This unfortunately doesn't seem to work for me either
I had to put my device in PTP mode in order for ADB to show the device, after the device was confirmed with adb devices, I issued the commands this is the output
Code:
C:\Users\NOTIMPORTANT\AppData\Local\Android\sdk>adb devices
List of devices attached
VS986931(changed the last four for security) device
C:\Users\NOTIMPORTANT\AppData\Local\Android\sdk>adb shell
[email protected]:/ $ settings put global tether_dun_required 0
settings put global tether_dun_required 0
[email protected]:/ $ settings put system tether_entitlement_check_state 0
settings put system tether_entitlement_check_state 0
[email protected]:/ $
When I attempt to enable hotspot I am greeted with the "Use of this service requires a subscription..."
FoxFi seems to work, I just HATE having to change my lock screen in order to use the damn thing!
I'm willing to run further tests and commands if you would like, please just let me know.
I have NOT taken any over the air update. I used the Debloater tool and blocked/hid the app.
Tomyk89 said:
when do you see the subscription message?
try typing:
adb devices
you should see a string of characters listing your device. if it shows no device, then you need to double check that you have your device drivers installed
Click to expand...
Click to collapse
Here's a screenshot of my terminal window:
I'm using the native tethering just like everybody else (Settings, More, flick the tethering switch to On and receive the service check). Haven't taken the OTA and have the service disabled via debloater tool. I appreciate the help!
At this point I'm not sure why some are reporting that this works while others aren't. I added a message on the original post warning that this isn't a for sure thing. I'll be sure to update if/when I find a fix or what is going wrong, but for now I think I have enough info to look into this. thanks for your help everyone and I hope that I can find a fix for this. Worst case - we have to wait until we have root to enable this.
-tom
Okay Sso I've just ordered the lenovo p2. I was looking for a mid-range/budget phone under the £200 price mark and found this and several others. After checking and comparing the phones in this range, I decided to buy this (even though the camera is pretty rubbish). Now upon further investigation, I've noticed that this phone isn't as polished in terms of glitches. There's a lip sync issue and notification issues that keeps on coming up wherever I look as well as several other issues. Most of the fixes for these issues are pretty much either work or don't so I don't want to end up with a phone that has glitches. Could someone list their experience with this phone and any pros and cons.
TwilightLoz said:
Okay Sso I've just ordered the lenovo p2. I was looking for a mid-range/budget phone under the £200 price mark and found this and several others. After checking and comparing the phones in this range, I decided to buy this (even though the camera is pretty rubbish). Now upon further investigation, I've noticed that this phone isn't as polished in terms of glitches. There's a lip sync issue and notification issues that keeps on coming up wherever I look as well as several other issues. Most of the fixes for these issues are pretty much either work or don't so I don't want to end up with a phone that has glitches. Could someone list their experience with this phone and any pros and cons.
Click to expand...
Click to collapse
Update to nougat bro and issue will be fixed
reality1234 said:
Update to nougat bro and issue will be fixed
Click to expand...
Click to collapse
Im in the UK and not sure if we have received the update over here yet.
Yes just update to nougat and enjoy.
I haven't regretted buying this phone one single bit.
It's a great phone and amazing phone once you factor in the price!
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
There is an official update but they pulled it for the time being (there are still a couple of issues). It's still better than MM and you can download and put the update.zip on the SD card to update it manually.
philje123 said:
Yes just update to nougat and enjoy.
I haven't regretted buying this phone one single bit.
It's a great phone and amazing phone once you factor in the price!
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
There is an official update but they pulled it for the time being (there are still a couple of issues). It's still better than MM and you can download and put the update.zip on the SD card to update it manually.
Click to expand...
Click to collapse
MM?
Do I have to root the phone just to update it manually?
No, you don't have to root to update it.
The lip sync issue can be fixed by updating to Nougat and resetting the phone to factory defaults after updating it.
The notification "lag" issue can be fixed by executing a adb dumpsys command to disable doze.
MrColdbird said:
The notification "lag" issue can be fixed by executing a adb dumpsys command to disable doze.
Click to expand...
Click to collapse
And how would I do that?
No problems here... Probably some mistake from your side... The sync issue was resolved in nougat AFAIK.
TwilightLoz said:
And how would I do that?
Click to expand...
Click to collapse
adb shell dumpsys deviceidle disable
yes i have also purchased from 3 UK and all issues are resolved with Nougat update which you can do manually. It also enables Volte so it works properly. Just follow the manual update for Nougat thread.
So the notification lag isn't really the Lenovo P2's problem?
edit: perhaps it really isn't https://www.reddit.com/r/Nexus6P/comments/3qsgue/yes_doze_will_delay_your_social_media/
Doze is a disease, but yes, it's not the P2's fault.
Bigger shot smartphones like the OnePlus 3 also suffer from this "bug".
Doze is worthless it doesn't even save battery for the most part. It just delays notifications. Yes that's what it does. It's a plague on many phones.
how to disable it?
No issues here.
MrColdbird said:
The notification "lag" issue can be fixed by executing a adb dumpsys command to disable doze.
Click to expand...
Click to collapse
What is this "lag" you speak of?
Is this the lag like -
When Im playing spotify and stopped and cleared it from recents I'll have some notification in the status bar
like the first song i played then after display. Notification is gone. is that it??
sam00561 said:
how to disable it?
Click to expand...
Click to collapse
adb shell dumpsys deviceidle disable
Needs to be done after every reboot as it doesn't stick.
Also needs to be noted that this command can be made to auto execute when the hosting app is given android.permission.DUMP rights via adb, or if the executing app has root rights.
I coded myself a minimalistic app, requested and granted it android.permission.DUMP and auto start rights and let it handle the command execution for me, essentially disabling doze permanently on my P2.
Things have been a breeze since then.
MrColdbird said:
Also needs to be noted that this command can be made to auto execute when the hosting app is given android.permission.DUMP rights via adb, or if the executing app has root rights.
I coded myself a minimalistic app, requested and granted it android.permission.DUMP and auto start rights and let it handle the command execution for me, essentially disabling doze permanently on my P2.
Things have been a breeze since then.
Click to expand...
Click to collapse
Care to share in PM?
Skickat från min iPhone med Tapatalk
I think the following helps. Credit goes to JasonMR and [MENTION=487946]manototh (Taken from oneplus.net forum)
JasonMR
KitKat
JasonMR, Nov 2, 2016 :
Guys, to avoid having to run the ADB command after each reboot follow these instructions (please note, the files should be downloaded to a PC and then transferred to your phone via USB otherwise they mess up sometimes):
You need to enable USB debugging mode in Developer options first
Download and install this apk and transfer it to your phones storage - https://drive.google.com/file/d/0BxDMCRH9QxV7aUQyalpZQ2JudGc/view?usp=drivesdk
Then connect phone to PC and allow the drivers to install
Download and install ADB here - https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
Go into the ADB folder, hold shift, right click and select "Open command prompt here"
Type the command: adb devices (now hit enter)
It should return your phones serial number is connected correctly
Run this command in ADB: adb -d shell pm grant com.adamioan.scriptrunner android.permission.DUMP (now hit enter)
Download this file and transfer it to your phones storage - https://drive.google.com/open?id=0BxDMCRH9QxV7YVA4YmxGTS1OX3c
Open the SH Script runner app and tap the three dots in the top right corner, select "Load" and locate the file from teh previous step
Click the Circle button with the play sign at the top of the screen
You should see the message "Idle mode disabled" which means that Doze has now been disabled.
Whenever you reboot your phone, open the SH Script runner and the command will still be there, just click the play button to run the script again.
And that is it, two clicks to disable Doze after each reboot.
Full credit to [MENTION=487946]manototh for putting this together originally.
I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)
Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?
I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.
Did someone have any success?
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps
?
Hey did you succeed?
please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks
Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon
Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?
Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?
Hi Mr.
mrtoweldo you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job
Hi,
Our Xiaomi MI 9T is splendid with its great AMOLED full screen without any notch or hole.
However, the web browsers like Chrome (and others apps) doesn't propose the possibility in the settings to remove the notification bar and to get a true immersive full screen mode.
No problem, adb is there!
No need to root the smartphone.
EDIT: I have tested "Immersive Manager Application" from Google Play Store and it's perfect. Very simple and it works even when you reboot your phone.
No more need to type adb commands below except at least few adb commands to grant the Secure Settings permission to the app. This is well explained by the application when you launch it the first time.
I let the adb commands below for information in case we had some "purists" who prefer adb than an immersive app.
1/ Enable the Developper mode
Go to Parameters/ About the phone
Click many times (at least 10) on the MIUI Version to activate the Developper mode
2/ Enable USB Debugging
Go to Parameters/... Others parameters/Developper options
Click on USB debugging
Click on Install via USB => You will have to connect to your MI account
Click on USB debugging (security parameters)
3/ Launch adb on your PC
Get adb.exe on the net (very easy)
Put it in a folder of your PC (for instance C:/adb)
Connect your smartphone to the PC
Launch a DOS command window
Go to the adb folder => cd /adb
To check if your smartphone is ready, type:
Code:
adb devices
If it's the first time, there will be a popup on your smartphone to authorize the adb commands
Then, normally your device will appear after typing "adb devices"
4/ Get the list of applications installed on your smartphone
Code:
adb shell pm list packages
Retrieve the name of the application(s) you want to remove the notification bar.
5a/ For instance, hide the notification bar only for Chrome and Google Photos
Code:
adb shell settings put global policy_control immersive.status=com.android.chrome,com.google.android.apps.photos
Note: Each time you enter this command, you cancel the previous one. You need to type only one command with all the apps you want to remove the notification bar (names of app are separated by a comma ,).
5b/ For instance, if you want to hide the notification bar for all the applications
Code:
adb shell settings put global policy_control immersive.status=*
6/ If you want to cancel this setting and put back the notification bar
Code:
adb shell settings put global policy_control null*
Enjoy your brillant full screen mainly when you are in dark mode.
:good:
Pls the screen..
Redmi K20 cihazımdan Tapatalk kullanılarak gönderildi
pidobeuliou said:
Hi,
Our Xiaomi MI 9T is splendid with its great AMOLED full screen without any notch or hole.
However, the web browsers like Chrome (and others apps) doesn't propose the possibility in the settings to remove the notification bar and to get a true immersive full screen mode.
No problem, adb is there!
No need to root the smartphone.
1/ Activate the Developper mode
Go to Parameters/ About the phone
Click many times (at least 10) on the MIUI Version to activate the Developper mode
2/ Activate USB Debugging
Go to Parameters/... Others parameters/Developper options
Click on USB debugging
Click on Install via USB => You will have to connect to your MI account
Click on USB debugging (security parameters)
3/ Launch adb on your PC
Get adb.exe on the net (very easy)
Put it in a folder of your PC (for instance C:/adb)
Connect your smartphone to the PC
Launch a DOS command window
Go to the adb folder => cd /adb
To check if your smartphone is ready, type:
Code:
adb devices
If it's the first time, there will be a popup on your smartphone to authorize the adb commands
Then, normally your device will appear after typing "adb devices"
4/ Get the list of applications installed on your smartphone
Code:
adb shell pm list packages
Retrieve the name of the application(s) you want to remove the notification bar.
5a/ For instance, hide the notification bar only for Chrome and Google Photos
Code:
adb shell settings put global policy_control immersive.status=com.android.chrome,com.google.android.apps.photos
Note: Each time you enter this command, you cancel the previous one. You need to type only one command with all the apps you want to remove the notification bar (names of app are separated by a comma ,).
5b/ For instance, if you want to hide the notification bar for all the applications
Code:
adb shell settings put global policy_control immersive.status=*
6/ If you want to cancel this setting and put back the notification bar
Code:
adb shell settings put global policy_control null*
Enjoy your brillant full screen mainly when you are in dark mode.
:good:
Click to expand...
Click to collapse
Thanks for the instructions bro... I like the immersive mode on all the apps but i do not in instagram app, What is the command to get the immersive mode on all the apps but not in some specifics one?
The setting is reset on reboots. How can it be persisted?
salzzz said:
The setting is reset on reboots. How can it be persisted?
Click to expand...
Click to collapse
Do you have root permissions? If the asnwer is "yes" you can do this:
Install terminal emulator from google play store. Open it and writte "su"
now writte this:
settings put global policy_control immersive.status=*
Tachan! you have immensive mode active. Only save the command in a note app. Always you reboot your phone the only thing you have to do is open terminal, su and paste your command.
A lot more easy and fast than do it with adb. the only "problem" is you need root.
If someone knows how to add an exception, please say so.
How do you show it on lock screen? Any ideas?
"Permission denial: writing to settings requires:android.permission.write_security_settings"
ramsyst said:
"Permission denial: writing to settings requires:android.permission.write_security_settings"
Click to expand...
Click to collapse
Did you manage to overcome this getting same error here
NVM, fixed it
ralphoberholzer said:
Did you manage to overcome this getting same error here
NVM, fixed it
Click to expand...
Click to collapse
Still getting the same error, how did u get around it ?
ramsyst said:
Still getting the same error, how did u get around it ?
Click to expand...
Click to collapse
Enable USB debugging (security settings) under developer options.
I used SystemUI Tuner as it allows for blacklisting apps (sucha as whatsapp) that don´t manage full screen well.
ralphoberholzer said:
Enable USB debugging (security settings) under developer options
Click to expand...
Click to collapse
Thank you! It worked, but as stated above, it reset after phone restart.
Maybe running a tasker command at boot might fix it ?
Edit: Use the Immersive Manager app (thank me later!)
ramsyst said:
Thank you! It worked, but as stated above, it reset after phone restart.
Maybe running a tasker command at boot might fix it ?
Edit: Use the Immersive Manager app (thank me later!)
Click to expand...
Click to collapse
Worked great, Thanks
pidobeuliou said:
Hi,
Our Xiaomi MI 9T is splendid with its great AMOLED full screen without any notch or hole.
However, the web browsers like Chrome (and others apps) doesn't propose the possibility in the settings to remove the notification bar and to get a true immersive full screen mode.
No problem, adb is there!
No need to root the smartphone.
1/ Activate the Developper mode
Go to Parameters/ About the phone
Click many times (at least 10) on the MIUI Version to activate the Developper mode
2/ Activate USB Debugging
Go to Parameters/... Others parameters/Developper options
Click on USB debugging
Click on Install via USB => You will have to connect to your MI account
Click on USB debugging (security parameters)
3/ Launch adb on your PC
Get adb.exe on the net (very easy)
Put it in a folder of your PC (for instance C:/adb)
Connect your smartphone to the PC
Launch a DOS command window
Go to the adb folder => cd /adb
To check if your smartphone is ready, type:
Code:
adb devices
If it's the first time, there will be a popup on your smartphone to authorize the adb commands
Then, normally your device will appear after typing "adb devices"
4/ Get the list of applications installed on your smartphone
Code:
adb shell pm list packages
Retrieve the name of the application(s) you want to remove the notification bar.
5a/ For instance, hide the notification bar only for Chrome and Google Photos
Code:
adb shell settings put global policy_control immersive.status=com.android.chrome,com.google.android.apps.photos
Note: Each time you enter this command, you cancel the previous one. You need to type only one command with all the apps you want to remove the notification bar (names of app are separated by a comma ,).
5b/ For instance, if you want to hide the notification bar for all the applications
Code:
adb shell settings put global policy_control immersive.status=*
6/ If you want to cancel this setting and put back the notification bar
Code:
adb shell settings put global policy_control null*
Enjoy your brillant full screen mainly when you are in dark mode.
:good:
Click to expand...
Click to collapse
I am sorry friend, bootloader unlocked ?
wilmerwils said:
I am sorry friend, bootloader unlocked ?
Click to expand...
Click to collapse
No, it's not necessary to unlock the bootloader.
You have just to activate the developper mode as I indicate it.
ramsyst said:
Thank you! It worked, but as stated above, it reset after phone restart.
Maybe running a tasker command at boot might fix it ?
Edit: Use the Immersive Manager app (thank me later!)
Click to expand...
Click to collapse
Yes, it's true. Each time you reboot the phone, you should loose the setting.
And good point, thank you Ramsyst, I didn't check on Google Play Store the myriad of immersive mode applications!!
I have tested "Immersive Manager Application" and it's perfect. Very simple and it works even when you reboot your phone. :good::good:
I had previously created a task with Tasker and AutoTools (paid version) to change the immersive mode with the "Custom Setting" feature. But knowing that there are many apps (free and paid version) doing that better than AutoTools, it's not usefull to describe how I did it.
pidobeuliou said:
Yes, it's true. Each time you reboot the phone, you should loose the setting.
And good point, thank you Ramsyst, I didn't check on Google Play Store the myriad of immersive mode applications!!
I have tested "Immersive Manager Application" and it's perfect. Very simple and it works even when you reboot your phone. :good::good:
I had previously created a task with Tasker and AutoTools (paid version) to change the immersive mode with the "Custom Setting" feature. But knowing that there are many apps (free and paid version) doing that better than AutoTools, it's not usefull to describe how I did it.
Click to expand...
Click to collapse
Thank you too! I didn't know this immersive mode was possible until i stumbled on your thread. Now, we can all enjoy that beautiful screen 100%!
No devices / emulator found ... Please help. I instal drivers do all on this topic
ramsyst said:
Thank you! It worked, but as stated above, it reset after phone restart.
Maybe running a tasker command at boot might fix it ?
Edit: Use the Immersive Manager app (thank me later!)
Click to expand...
Click to collapse
With Tasker you already have an option to make all apps you want to go immersive! There is no need to use any other command or app.
I believe everybody in the world should buy tasker
Is the best Android app. It may looks hard in the begining, but your imagination is the limit to do whatever you want.
Hi how can i used this on split screen but in full screen mode with status bar and navigation?
MrYuu said:
Hi how can i used this on split screen but in full screen mode with status bar and navigation?
Click to expand...
Click to collapse
You're right. I had never tested the split screen function. The notification bar is not hidden on split screen mode even when immersive mode is activated. The result is a bit weird as there is a mix of notification bar and app on the top of the screen.
"Google search" indicates that you are not the first one to face this issue... but apparently no solution has been found so far.
If somebody can help.
Hi
I'm trying to run this command on boot:
Code:
settings put secure sysui_keyguard_left "com.devuni.flashlight/com.devuni.flashlight.MainActivity"
However, I cant find a way to make it run at boot. App Init.D can execute it on demand (sometimes works), but never at boot. Kernel Auditor is not working as well (nothing happens).
Please, what else can I try to make it work on Oreo 8.1 stock ROM, rooted with Magisk?
Thanks in advance!
-Or at least, is there an app to create 1x1 widget to execute this script?
-Is there any way to change icon of the shortcut? This one shows only white circle as an icon. However, same app had normal icon, while set as shortcut on alternative lockscreen app... Or is this not possible?
Please, I have this issue since month, and I cant push it trough. It is last issue with my new phone, but I am afraid I will fight it for maybe months more! Unless I will get some help maybe...