Develop Bugs

[Q] what is suitable rom for my device

i have note 2 , 4.1.1 version rooted so i can't instal, updates via wifi
my rom is china region and china don't have the last update 4.4.2 for note 2
can i install any rom with any another region without problems ?

cocoooo said:
i have note 2 , 4.1.1 version rooted so i can't instal, updates via wifi
my rom is china region and china don't have the last update 4.4.2 for note 2
can i install any rom with any another region without problems ?
Click to expand...
Click to collapse
Download triangle away from the play store and reset flash counter.
Fully unroot using Supersu. Then upgrade via software update or Kies.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk

cocoooo said:
i have note 2 , 4.1.1 version rooted so i can't instal, updates via wifi
my rom is china region and china don't have the last update 4.4.2 for note 2
can i install any rom with any another region without problems ?
Click to expand...
Click to collapse
If your device is not carrier locked, you can install any version of firmware, also of another country (you can change language later). Do it via odin.
You can install a stock version or a modded one (Dn3, dr.ketan or other in this section).

cocoooo said:
i have note 2 , 4.1.1 version rooted so i can't instal, updates via wifi
my rom is china region and china don't have the last update 4.4.2 for note 2
can i install any rom with any another region without problems ?
Click to expand...
Click to collapse
If your phone includes two sims, it belongs to China region. It has to be Samsung Galaxy Note 2 Duos GT-N7102.
In that case, unfortunately, you can only upgrade to 4.3 official stock ROM.
There should be a 4.4.2 based ROM available. But my best guess is that it is in Chinese language. So don't know what to suggest.
If it is GT-N7100, you will be spoilt for choice.
Sent from my GT-N7100 using Tapatalk

changing one stock ROM for another

Hi,
I have an AT&T Note 4 (SM-N910A). I would like to upload non-AT&T Stock Rom. I found non AT&T stock rom for SM-N910F (which has the same Snapdragon 805 processor).
I know that SM-N910A has a locked bootloader. but I have seen posts saying that it is possible to upload stock rom even in this case. here is a sample post, although I don't trust the source.
I have seen other posts saying that this is not possible, but they are quite old.
Question:
Does anyone know if uploading a stock, non-ATT rom is possible?
If it is possible, would ODIN get the job done?
Finally - would the SM-N910C do for the SM-N910A? What am I looking for in order to guarantee a match?
Current ROM
bootloader / pda / baseband versions N910AUCU2COC5
CSC version N910AATT2COC5​
Desired ROM
Model SM-N910F
Model name GALAXY Note 4
Country Israel (Pelephone)
Version Android 5.0.1
Changelist 4596175
Build date Tue, 31 Mar 2015 09:31:16 +0000
Product code PCL
PDA N910FXXU1BOC5
CSC N910FOJK1BOC2​

SirenumDev said:
Hi,
I have an AT&T Note 4 (SM-N910A). I would like to upload non-AT&T Stock Rom. I found non AT&T stock rom for SM-N910F (which has the same Snapdragon 805 processor).
I know that SM-N910A has a locked bootloader. but I have seen posts saying that it is possible to upload stock rom even in this case. here is a sample post, although I don't trust the source.
I have seen other posts saying that this is not possible, but they are quite old.
Question:
Does anyone know if uploading a stock, non-ATT rom is possible?
If it is possible, would ODIN get the job done?
Finally - would the SM-N910C do for the SM-N910A? What am I looking for in order to guarantee a match?
Current ROM
bootloader / pda / baseband versions N910AUCU2COC5
CSC version N910AATT2COC5​
Desired ROM
ModelSM-N910F
Model nameGALAXY Note 4
CountryIsrael (Pelephone)
VersionAndroid 5.0.1
Changelist4596175
Build dateTue, 31 Mar 2015 09:31:16 +0000
Product codePCL
PDAN910FXXU1BOC5
CSCN910FOJK1BOC2​
Click to expand...
Click to collapse
You can only Odin firmware for the n910a
You said it yourself. We have a locked bootloader, which means that only stock firmware meant for our specific phone model will flash.
Sent from my SAMSUNG-SM-N910A using Tapatalk

Check this out !!!! I am in the same boat...
SirenumDev said:
Hi,
I have an AT&T Note 4 (SM-N910A). I would like to upload non-AT&T Stock Rom. I found non AT&T stock rom for SM-N910F (which has the same Snapdragon 805 processor).
I know that SM-N910A has a locked bootloader. but I have seen posts saying that it is possible to upload stock rom even in this case. here is a sample post, although I don't trust the source.
I have seen other posts saying that this is not possible, but they are quite old.
Question:
Does anyone know if uploading a stock, non-ATT rom is possible?
If it is possible, would ODIN get the job done?
Finally - would the SM-N910C do for the SM-N910A? What am I looking for in order to guarantee a match?
Current ROM
bootloader / pda / baseband versions N910AUCU2COC5
CSC version N910AATT2COC5​
Desired ROM
Model SM-N910F
Model name GALAXY Note 4
Country Israel (Pelephone)
Version Android 5.0.1
Changelist 4596175
Build date Tue, 31 Mar 2015 09:31:16 +0000
Product code PCL
PDA N910FXXU1BOC5
CSC N910FOJK1BOC2​
Click to expand...
Click to collapse
CHECK THIS OUT !!!!
http://forum.xda-developers.com/note-4-att/general/sm-n910f-firmware-note-4-sm-n910a-t3375595/page2#post67055608

My Galaxy S9 SM-G960U1 haven't got Android 10 Update Yet ?

Hi,
XDA Community
So my inquiry today, is that
i realised samsung has just roll out the Android 10 Update for S9 devices, on Feb 2
but my phone is not getting updated yet via OTA, like always
I had no problem getting Android 9 (Pie) when it released.
but now, i am so confused, why my phone is not getting the update.
Well, i looked into SAMMOBILE official page, and some carriers of my model [SM-G960U1]
have already the Android 10 Update,
so my question here is, wich one of those sammobile.com - samsung - galaxy-s9 -firmware - #SM-G960U1]
, is my correct update or firmware
i figure out is the Uknown (XAA) Version [sammobile.com - samsung- galaxy-s9 - firmware - SM-G960U1 - XAA - download - G960U1UEU7DTA5 - 314846], but i need to be sure
so here we are, i need some help to get the correct firmware for my S9.
The things is that the PDA and CSC are the same on each Carrier, and is difficult to identify
i never had that issue with previous phones like S6, S3 or S7.
also, i looked into IME PAGE INFO, and says that is : XAG Version -> IMEI.info: CSC XAG
so, that confuse me.
NOTE: AND not MY Phone is not Rooted, i keep it official since i bought it.
so for you, i have the ADB Lines: of my S9 Phone:
[ril.debug.ntc]: [M:VZW, S:TFN, T:CDM, C:USA]
[ril.region_props]: [TFN.TFN]
[ril.product_code]: [SM-G960UZKATFN]
[ro.boot.carrierid]: [XAA]
[ro.boot.em.model]: [SM-G960U1]
[ro.boot.sales_code]: [TFN]
[ro.bootloader]: [G960U1UES7CSK2]
[ro.build.PDA]: [G960U1UES7CSK2]
[ro.build.display.id]: [PPR1.180610.011.G960U1UES7CSK2]
[ro.build.product]: [starqlteue]
[ro.carrier]: [unknown]
Click to expand...
Click to collapse
AND Thats all
very grateful that you can help me
I will appreciate it a lot

BoxEstil said:
Hi,
XDA Community
So my inquiry today, is that
i realised samsung has just roll out the Android 10 Update for S9 devices, on Feb 2
but my phone is not getting updated yet via OTA, like always
I had no problem getting Android 9 (Pie) when it released.
but now, i am so confused, why my phone is not getting the update.
Well, i looked into SAMMOBILE official page, and some carriers of my model [SM-G960U1]
have already the Android 10 Update,
so my question here is, wich one of those sammobile.com - samsung - galaxy-s9 -firmware - #SM-G960U1]
, is my correct update or firmware
i figure out is the Uknown (XAA) Version [sammobile.com - samsung- galaxy-s9 - firmware - SM-G960U1 - XAA - download - G960U1UEU7DTA5 - 314846], but i need to be sure
so here we are, i need some help to get the correct firmware for my S9.
The things is that the PDA and CSC are the same on each Carrier, and is difficult to identify
i never had that issue with previous phones like S6, S3 or S7.
also, i looked into IME PAGE INFO, and says that is : XAG Version -> IMEI.info: CSC XAG
so, that confuse me.
NOTE: AND not MY Phone is not Rooted, i keep it official since i bought it.
so for you, i have the ADB Lines: of my S9 Phone:
AND Thats all
very grateful that you can help me
I will appreciate it a lot
Click to expand...
Click to collapse
You don't need Android 10
Sent from my moto g(7) play using Tapatalk

PoochyX said:
You don't need Android 10
Sent from my moto g(7) play using Tapatalk
Click to expand...
Click to collapse
https://youtu.be/KL8U249nY5s
It's a complete tutorial..
Sent from my [device_name] using XDA-Developers Legacy app

BoxEstil said:
Hi,
XDA Community
So my inquiry today, is that
i realised samsung has just roll out the Android 10 Update for S9 devices, on Feb 2
but my phone is not getting updated yet via OTA, like always
I had no problem getting Android 9 (Pie) when it released.
but now, i am so confused, why my phone is not getting the update.
Well, i looked into SAMMOBILE official page, and some carriers of my model [SM-G960U1]
have already the Android 10 Update,
so my question here is, wich one of those sammobile.com - samsung - galaxy-s9 -firmware - #SM-G960U1]
, is my correct update or firmware
i figure out is the Uknown (XAA) Version [sammobile.com - samsung- galaxy-s9 - firmware - SM-G960U1 - XAA - download - G960U1UEU7DTA5 - 314846], but i need to be sure
so here we are, i need some help to get the correct firmware for my S9.
The things is that the PDA and CSC are the same on each Carrier, and is difficult to identify
i never had that issue with previous phones like S6, S3 or S7.
also, i looked into IME PAGE INFO, and says that is : XAG Version -> IMEI.info: CSC XAG
so, that confuse me.
NOTE: AND not MY Phone is not Rooted, i keep it official since i bought it.
so for you, i have the ADB Lines: of my S9 Phone:
AND Thats all
very grateful that you can help me
I will appreciate it a lot
Click to expand...
Click to collapse
XAA is one of several multi CSC firmware sets. Just flash it in Odin, youll be fine. HOME_CSC to not have it factory reset and CSC to have it factory fresh.
https://www.sammobile.com/samsung/galaxy-s9/firmware/SM-G960U1/XAA/download/G960U1UES7DTB2/319745/
and samfirm or frija to download it at over twice the speed
PoochyX said:
You don't need Android 10
Sent from my moto g(7) play using Tapatalk
Click to expand...
Click to collapse
very insightful.... posts like these are the glue that keeps this community together :: facepalm ::

Thanks to all,
i just figure out, that my device support XAA and TFN Carriers, and i just get the Android 10 update, today.
for some one that this can help
to switch between XAA or TFN, just depend on what type of SIM you are using, both can work on this samsung s9 model, the phone will automatically reboot and swith the best for you (XAA or TFN)
Have a great day!

Can i Flash Singapore firmware on my australia model

Soooo long time australia region haven't update android 10
can i know flashable?

terrance91 said:
Soooo long time australia region haven't update android 10
can i know flashable?
Click to expand...
Click to collapse
What's your current CSC of your device: XSA (Multi-CSC OXM)?
If so: https://www.sammobile.com/samsung/galaxy-fold/firmware/SM-F900F/PHN/download/F900FXXU3BTDD/336226/
Flash AP BL CP & HOME_CSC_OXM (other file in archive NOT to be used) with Odin 3.14.x: your data will stay intact
This is the latest update with all OneUI 2.1 functions and May security patch

Downgrade to Android 12, One UI 4 - because of broken ANT+ Support?

Is there a possibility to downgrade to the last Stock ROM?
How to do this?
It's because of the broken ANT+ Support. Custom ROM with ANT+ would be great too, but I can't find one with working ANT+. Any recommendations?

retorix said:
Is there a possibility to downgrade to the last Stock ROM?
How to do this?
It's because of the broken ANT+ Support. Custom ROM with ANT+ would be great too, but I can't find one with working ANT+. Any recommendations?
Click to expand...
Click to collapse
You can flash Android 12 Firmware using odin.
Just download firmware files from Frija by typing your phones model number.
As for the CSC, the only one I know of with Android 12 as of now is KSA.
Once you get all the firmware files, place them in odin and flash while your phone is in download mode.

J521s said:
You can flash Android 12 Firmware using odin.
Just download firmware files from Frija by typing your phones model number.
As for the CSC, the only one I know of with Android 12 as of now is KSA.
Once you get all the firmware files, place them in odin and flash while your phone is in download mode.
Click to expand...
Click to collapse
Thanks for your swift and helpful reply!
Is the wrong CSC a problem? I would need DBT for Germany unbranded.
Dispite of this, I can't find a Android 12 Firmware for my SM-G980F with Frija - not even with KSA.

retorix said:
Thanks for your swift and helpful reply!
Is the wrong CSC a problem? I would need DBT for Germany unbranded.
Dispite of this, I can't find a Android 12 Firmware for my SM-G980F with Frija - not even with KSA.
Click to expand...
Click to collapse
Wrong CSC shouldn't be a problem as long as you have a sim card installed, but then again, it doesn't matter anyways since you want to stay on Android 12.
The S20 got updated into Android 13 in most countries.
Second way to do this is via those websites either Sammobile or samfrew where you just input your Phones model, CSC, and select what Android version you want.