Hi,
is there a way to change the brightness on the fingerprint sensor. I believe even if you put your brightness to lowest the fingerprint's brightness remains the same when idling.
I'm scared because it might cause uneven display or burn-in issue/s.
Thanks
Are you using Always On Display? If not, then there's nothing to worry.
Related
Using stock 4.0.1 here, and have always had the brightness set to auto. But it never seems to do anything? If I am in a light or dark room it is always dark, often darker than the lowest brightness setting.
I am just worried that the sensor might not be working, if the phone needs to be sent back it needs to be done soon. Anyone else with this issue? I know the sensor that turns off the phone screen when in call works, but the auto brightness might use a different one.
Fatila said:
Using stock 4.0.1 here, and have always had the brightness set to auto. But it never seems to do anything? If I am in a light or dark room it is always dark, often darker than the lowest brightness setting.
I am just worried that the sensor might not be working, if the phone needs to be sent back it needs to be done soon. Anyone else with this issue? I know the sensor that turns off the phone screen when in call works, but the auto brightness might use a different one.
Click to expand...
Click to collapse
Auto brightness is just simply low on this device. There are some hacks in the dev section to increase it...but they don't work on my ROM.
I just started using juicedefender to adjust the auto birghtness
So auto brightness itself is broken and sensor is pry OK? I wonder if there are any apps to test it.
Fatila said:
So auto brightness itself is broken and sensor is pry OK? I wonder if there are any apps to test it.
Click to expand...
Click to collapse
Simply put a bright light to it and watch the screen brighten up. The sensor is fine.. auto brightness simply is a little too conservative, probably because more people would moan about battery life than screen brightness.
My auto brightness works just fine. Sometimes I have to the screen off then on for it to adjust. Other than that, the levels are fine. I'm on 4.0.3.
Sent from my Galaxy Nexus using XDA App
I've noticed with my GNEX that it seems like all of the sudden it won't auto dim. When I unlock the device it will brighten if needed, however if I walk into a dimmer area it will not auto dim. Is this the normal behavior for the light sensor?
I'm used to my Xperia Play which would constantly adjust the screen up and down.
My auto-brightness setting sets the screen brightness lower than the lowest actual brightness setting regardless of whether I'm in light or dark.
There's a fix for it here: http://forum.xda-developers.com/showthread.php?t=1377410&highlight=auto+screen+brightness
I haven't tested that out though.
Kinbote said:
My auto-brightness setting sets the screen brightness lower than the lowest actual brightness setting regardless of whether I'm in light or dark.
There's a fix for it here: http://forum.xda-developers.com/showthread.php?t=1377410&highlight=auto+screen+brightness
I haven't tested that out though.
Click to expand...
Click to collapse
Yea I was worried maybe the brightness sensor was not working since. Turns out my wife's droid 2 with CM7 acts the same way. Lowest setting until you unlock at which time it only increases the brightness, never decreasing.
Does anyone know what light levels the light sensor takes? I came from Droid X where the light sensor only sense 4 values. Does the GS3 light sensor only take specific values or the whole interval? I want to know cause my auto brightness is very low when I'm outdoor and not sure which light levels to fix.
Are you sure the brightness is low when you're outside?
AMOLED screens usually aren't very effective in the outdoors, I have to crank the brightness all the way up for it to be visible for example.
and iahucarn
I'm sure it's something to do with auto brightness since the screen is much brighter when I turn off the auto brightness and turn the brightness all the way up. It might be a bug in my rom, I'm using CM10.
Sometimes when I'm in a dimmer area, my display will be so dim I can hardly see it. This doesn't happen in brighter areas.
For reference, it is far far dimmer than brightness setting 1. I have the watch set to auto brightness and ambient off.
Anyone else seeing this?
Yeah, it seems that the 360's auto brightness setting is (at least sometimes) pretty aggressive in low light conditions.
Same here, and I hate that. I always have to go into the settings when the room light is dim, and switch off auto brightness and change to the 1 setting.
jt3 said:
Yeah, it seems that the 360's auto brightness setting is (at least sometimes) pretty aggressive in low light conditions.
Click to expand...
Click to collapse
I'm almost positive it's a bug, the low brightness of 1 isn't too bright for very dark situations and the dimmed mode is simply too dim.
I'm pretty sure auto-brightness should turn on at level 1 (if it's dark) and then go to the ultra-dimmed mode before the screen times-out just like in normal brightness.
I don't think I've seen this bug happen in the daytime though, so it does seem like a bug at brightness level 1 only
Any solution to this problem? Drives me crazy.
Thanks
Smart Brightness for Moto 360
Try Smart Brightness for Moto 360. This application allows to set auto brightness with a minimum brightness to avoid a dimm screen on dark situations.
https://play.google.com/store/apps/details?id=com.makinke.smartbrightness
I leave my phone set for Adaptive Brightness.
First, it's annoying that setting the manual brightness to max and then turning on Adaptive Brightness means that I can't achieve super dim display in dark.
Anyhow, so I leave my phone set to Adaptive Brightness all the time.
And it usually adjusts my display bright or dim(ish) as needed.
Then randomly it'll just go to the absolute dimmest setting and stay there even after a reboot.
I have to toggle Adaptive Brightness off and back on again.
Anyone else seeing this behavior?
I think it's time to give Lux Brightness app another shot.
Hopefully they've worked out the bugs since the last time I used it.
CZ Eddie said:
I leave my phone set for Adaptive Brightness.
First, it's annoying that setting the manual brightness to max and then turning on Adaptive Brightness means that I can't achieve super dim display in dark.
Anyhow, so I leave my phone set to Adaptive Brightness all the time.
And it usually adjusts my display bright or dim(ish) as needed.
Then randomly it'll just go to the absolute dimmest setting and stay there even after a reboot.
I have to toggle Adaptive Brightness off and back on again.
Anyone else seeing this behavior?
I think it's time to give Lux Brightness app another shot.
Hopefully they've worked out the bugs since the last time I used it.
Click to expand...
Click to collapse
I've not had any issues with mine, do you have a tempered glass screen protector that covers the sensor on the front of the phone? It may be detracting light confusing the sensor.
Nope, no covers. Nekid phone here.