MiFlash Problems, Device Bricked? - Xiaomi Mi Max 3 Questions & Answers

Hi, after an error 7 when flashing a custom rom via recovery, I tried to flash the actual stock rom with MiFlash.
Tried it serveral time, get allways the error message as shown in the attachement.
Is there any solution?

robert_b said:
Hi, after an error 7 when flashing a custom rom via recovery, I tried to flash the actual stock rom with MiFlash.
Tried it serveral time, get allways the error message as shown in the attachement.
Is there any solution?
Click to expand...
Click to collapse
Re-download custom ROM again. Use file manager if needed. Most likely a corrupt download.

usgaap said:
Re-download custom ROM again. Use file manager if needed. Most likely a corrupt download.
Click to expand...
Click to collapse
I tried downloads from several places. This is not the reason for the problem, sorry.

robert_b said:
I tried downloads from several places. This is not the reason for the problem, sorry.
Click to expand...
Click to collapse
Hi Robert,
My apologies for the short answer earlier.
Your device does not seem te be bricked. Yet. At least, not with the info you provided thus far. I am guessing you already googled "MiFlash crc check fail." Some of the options were; use a different archiver, re-download, sideload, rename file and folder into short names or boot a custom recovery (instead of flashing) and install that way.
I've had this exact same problem before (see bottom of post), hence my short reply.
Do you have custom recovery? Can you tell me what happens if you flash custom ROM for the Mi Max 3 that way?
It seems your goals is to flash official. Out of the top of my head, you could also install Official Global ROM through adb & fastboot. This needs unlocked bootloader though if I'm not mistaken, not sure if that's the case here. Alternatively, you can try using another computer. Or don't use MiFlash.
My issue with installing Global ROM was that the first 85% of the download took 3 minutes. The last 15% 5 seconds. I downloaded from official site. Install gave CRC Check Fail everytime. I tried 3 times. Nothing seemed out of the ordinary. I then used a Google Drive link with matching size and details and everything worked like a charm.
I sincerely hope any of this helps. As with everything Mi Max 3 related, please be aware of arb. Sorry for the generic warning but you can never be sure.
Regards

Related

Failed root attempt left tablet at the Samsung screen

I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
cameron72 said:
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
Click to expand...
Click to collapse
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
bob23bk said:
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
Click to expand...
Click to collapse
I had already tried the method and file in the forum you linked me to. It failed almost instantly. That's when I turned everything off and tossed it all to the back seat of my work truck before it got thrown at the windshield. I keep seeing people saying they have trwp or whatever. I don't even know what that is haven't researched that. Is it something i need as well?
I've never successfully rooted a Samsung device. I used to do this stuff a lot back with the droid x with Linux and everything was pretty simple. Does Samsung change their bootloader with each update like Motorola did then? I was wondering that when trying to install a firmware of a previous version that maybe that was the problem.
All I wanted root for was to just tweak some things and be happy. It has turned into a nightmare.
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
moonbutt74 said:
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
Click to expand...
Click to collapse
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
cameron72 said:
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
Click to expand...
Click to collapse
okay, hmm, when you say it fails, do you mean odin fails to flash and if so what is the reason/ouput ?
or do you mean that you are now in a recovery bootloop ?
note- though i go the full route of packing recovery.img's for odin flashing, the md5 checksum always seems to
come up as invalid, the working "remedy" is to remove the .md5 extension from the "odin-flashable-recovery".tar.md5 file
by renaming the file to "odin-flashable-recovery".tar
odin will no longer attempt the checksum verification but the recovery file will flash.
make sure you have samsung-usb-drivers for windows installed. on the main page of my devhost archive [link is in my signature]
you will find the tools you need. the possible problem is that the ota you installed may have overwritten your bootloader, for that i don't
have a reliable fix, so if anything make sure you also have the stock recovery ready to go as well as supersu update zip
already downloaded onto your device for rooting.
after you flash the custom recovery [with auto-restart in odin disabled] run the flash and wait for the res-ok message, give it another second or two then disconnect the tab and force reboot to recovery, home,vol-up and power, once in recovery make a full backup, then flash supersu zip and reboot, if you do go into recovery loop, force reboot to odin mode, home,vol-down and power, follow the on screen instruction, now reconnect your tab to pc and use odin to flash back stock recovery.
m
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
moonbutt74 said:
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
Click to expand...
Click to collapse
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
cameron72 said:
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
Click to expand...
Click to collapse
for root look up supersu update zip
ask Restl3ss :silly:
m
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Glad it worked out, recovering from brick does set you free from the stress induced by the disclaimers imo :silly:

Help please! Fire phone without an OS and stuck on amazon logo

Hello,
First of all, Thanks for this great community. It has been helping me with my S4 for a long time.
Almost a year ago, I bought a fire phone for my younger brother. Today I tried to install the Custom Rom CM11 (which I successfully did), but, among the files in the proper thread, are 2 more files, the Google apps and also, a "flash wipe out". I did this in the end, expecting that just cleaned everything without touching the OS. Huge and novice mistake from miself. After almost 5 hours of looking for a solution, I realized that I don't have an OS and can only enter to "Fire phone recovery mode". I have downloaded almost 5 or 6 stock firmwares that are available to donwload here in XDA. Tried to download the OTA for an unlocked phone from amazon and tried to upload it to the phone via ABD tools. In the end, I always get the same errors: Not-signed and can't install it in the phone.
I'm going to be honest: I'm desperate.
In conlcusion:
1) No OS in a fire phone.
2) No custom TWRP.
3) I just have recovery mode
4) Been trying to install through ADB tools without any success the stock OTA update (the last one, since I had the 4.6.6 version)
Anything that can help will be well received.
Thanks in advance
Hello,
Have you tried ADB sideload when you go into your phone's recovery? And if you did, what did it say when you tried installing it? Try using this to sideload your phone.
Thanks for your answer @mechasnyper but I have tried that out as well
Hey, thanks for the answer. I really appreciate the time for doing it.
Yes, I have tried the ADB Sideload. The phone it's identified through the CMD (I get to see the serial) and then try the ADB Sideload. It doesn't work with bin files. It says unable to load. I tried also with the zip files that are posted here in the forums, being able to load then at 100% but the cell phone says "invalid signature", and for this couldn't install it over the fire phone.
lordofra said:
Hey, thanks for the answer. I really appreciate the time for doing it.
Yes, I have tried the ADB Sideload. The phone it's identified through the CMD (I get to see the serial) and then try the ADB Sideload. It doesn't work with bin files. It says unable to load. I tried also with the zip files that are posted here in the forums, being able to load then at 100% but the cell phone says "invalid signature", and for this couldn't install it over the fire phone.
Click to expand...
Click to collapse
Try sideloading using this file. https://www.androidfilehost.com/?fid=24052804347783512 I found this somewhere else and this is the file I used when I screwed up my ROM installation.
When I get home I'll try using that file that you have posted.
I'll update the results.
lordofra said:
When I get home I'll try using that file that you have posted.
I'll update the results.
Click to expand...
Click to collapse
Success?
Sorry for the delay. Been talking with centurylink because since yesterday I have no Internet service (Answering from the phone). No, no success at all.
lordofra said:
It says unable to load.
Click to expand...
Click to collapse
Your need free RAM on computer bigger than .bin size.
Hey, thanks for the answer.
I'm doing it on my laptop that has 8 Gb of ram. Just in case, I'm going to try it on my brother's laptop that has 16 gb of ram to test this out. But I doubt this will make a difference, since I've tried already many .bin files (all of them are unable to load an their size its 1.2 GB max. Many zip files as well where I have obtained 100% load but the firephone aborts the installation due to signature verification failure.
This is really strange. I have screwed up installing Cyanogenmod onto my phone, yet I was able to revert back to the stock ROM with just the stock recovery. I will have to look more into this. I will post again soon for updates. Have you wiped the data and cache?
EDIT: I am not sure if this will work, but try using this bin file. http://androidhost.org/o120v
@lordofra
Try (with quotes)
adb sideload "full_path_and_name_of_the_bin.bin"

BootLoop problems

Hi, I currently have a Samsung Galaxy S7 Active and while updating, it went into a bootloop. I cant boot into recovery, odin fails to flash the stock rom, and all I get when booting is:
SAMSUNG
Galaxy S7 Active
Powered By
android
screen. It doesn't even go to that, all it does is boots into recovery. I don't want to send it out for repairs (Mostly because I am broke).
If also, may I get answers from people that own one and been in this problem before and/or people that know how to repair this issue.
Also, I can only use the Stock Recovery.
Thanks, Nysean01'
Edit: I have also been to this. It was no help what so ever and got me deeper to this point in the post.
Edit 2: I have a backup phone and that one is currently working. I still wanna keep using my newer one.
which rom/version was you on?
which you trying to get to?
which ones have you tried in odin?
are you loading all the files ?
does it say it completes successfully ?
miniminus said:
which rom/version was you on?
which you trying to get to?
which ones have you tried in odin?
are you loading all the files ?
does it say it completes successfully ?
Click to expand...
Click to collapse
7.0
Not trying to change
Yes, I'm loading all the files
Nope. It says in red, FAIL.
then i would guess that the file is currupt, or maybe the cable is dodge...
but which version was you on before (QB2) and which you tried so far ? (QD4 ?)
miniminus said:
then i would guess that the file is currupt, or maybe the cable is dodge...
but which version was you on before (QB2) and which you tried so far ? (QD4 ?)
Click to expand...
Click to collapse
I was running the latest version of everything. 7.0 for phone, 10 for computer, and a mod odin.
Try a different Odin package, an older stock ROM and a different cable.
Which ones would you recommend?
Odin 3.12.4 and PI2, that is the earliest on BL2, try that, and if it works you should be able to OTA back up.
Mark as closed. I took it to the store, and even they said that they cant do nothing about it. So, Since I had the warranty (didn't know, was a hand me down), Samsung is sending me a new phone.
I have the same problem, got stuck on Nand writel. Already try different odin versions, I was on the last stock room, the problem was that I heva virus and had to do a hard reset, but when I finish got stuck on google verification, after try a lot of times I decided to fls stock room, but I fail.
What I can do it?

Bricked Galaxy A3 2017

Hello everyone, I decided to root my phone today. First I enabled OEM unlock and then installed TWRP, no problems with that. Then I tried to install CF autoroot through recovery and everything seemed fine. When I tried to boot up my phone it said something like integrity check failed and I had to do a factory reset to be able to even start the phone. I did not do that but tried to install official samsung oreo firmware through odin but it won't install, just fails. Then i got other error message saying "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". The only thing I can do now is enter download mode and nothing else but odin does not let me flash anything. I'm desperate here so any suggestion would be great. Model is SM A-320FL btw. Sorry for my english and lengthy post
Jura_11 said:
Hello everyone, I decided to root my phone today. First I enabled OEM unlock and then installed TWRP, no problems with that. Then I tried to install CF autoroot through recovery and everything seemed fine. When I tried to boot up my phone it said something like integrity check failed and I had to do a factory reset to be able to even start the phone. I did not do that but tried to install official samsung oreo firmware through odin but it won't install, just fails. Then i got other error message saying "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". The only thing I can do now is enter download mode and nothing else but odin does not let me flash anything. I'm desperate here so any suggestion would be great. Model is SM A-320FL btw. Sorry for my english and lengthy post
Click to expand...
Click to collapse
What kind of error do you get in Odin?
Is it the one that says something like "SW Rev. check fail"?
If so than for me it worked to flash the bootloader and modem of Oreo and the after that i reinstalled the OS without any problems.
First it was just a red fail for BL, CSC and those other things and later it just won't even start. When I try to install TWRP it goes to half and stays there. Thanks for the suggestion though.
Jura_11 said:
First it was just a red fail for BL, CSC and those other things and later it just won't even start. When I try to install TWRP it goes to half and stays there. Thanks for the suggestion though.
Click to expand...
Click to collapse
Was your device from a carrier, if so, try to flash the firmware that your device came with. If you can't solve this, PM me, so that we can try to resolve this on Telegram, Discord etc. :highfive:
MartinYTCZ said:
Was your device from a carrier, if so, try to flash the firmware that your device came with. If you can't solve this, PM me, so that we can try to resolve this on Telegram, Discord etc. :highfive:
Click to expand...
Click to collapse
Thank you for the reply, I don't think it was from carrier, when I tried to flash firmware I downloaded latest firmware from my current carrier so I think that shouldn't be a problem. I'll contact you tomorrow because i'm just too tired now. And update, I can flash TWRP now if that is of any help.
It is solved now, thanks everyone for your help
Jura_11 said:
It is solved now, thanks everyone for your help
Click to expand...
Click to collapse
Hi. Glad to see you got this sorted, but it may be useful for other users to see what you did to resolve this.
Yes, how did you solved that.
Looking at two A320F I found one difference:
One has AP SWREV B:2 K:0 S:0
the other one (that makes trouble): AP SWREV B:3 K:1 S:1
What exactly does it mean.
Flashing with Odin gave me erros (on device, Odin just say "failed") depending on flashing BL (SW Rev Check failed )Bootlader Device: 3, binary: 2 , while flashing AP gives Kernel Rev check fail.
So, how to go on? I was able to flash TWRP, but not Stock (neither an old 6.0 nor 8.0).
Ok, solved it. Flashing stock will probably only work to same or newer versions, not for downgrade (at least not without any special tricks that I don't know).
After downloading the latest stock FW , odin passed.
Now I still have the problem, that I can't transfer data partion from one A3 to another one.
https://forum.xda-developers.com/showpost.php?p=78062070&postcount=71
My first error was that I downloaded wrong firmware for my phone and because of that odin gave me errors. Second error was that I tried to wipe data through advanced wipe, but I needed to format it by pressing format data button. After doing that I was able to flash official stock ROM, install TWRP and root my phone. User MartinYTCZ helped me greatly with this, big thanks to him again. :victory:
starbright_ said:
Ok, solved it. Flashing stock will probably only work to same or newer versions, not for downgrade (at least not without any special tricks that I don't know).
After downloading the latest stock FW , odin passed.
Now I still have the problem, that I can't transfer data partion from one A3 to another one.
https://forum.xda-developers.com/showpost.php?p=78062070&postcount=71
Click to expand...
Click to collapse
Can't you backup your internal storage on PC or SD card, contacts, messages, phone calls, settings on samsung account and apps and data with titanium backup? When I flashed stock ROM I lost all data from my phone so be careful with that.

find device storage corrupted your device is unsafe now

Im using MI 6 since last two weeks i am facing Error "find device storage corrupted your device is unsafenow" and already it’s been reset two times!
the wifi is not enabling and some of sensors are also not working i am in very big trouble
the bootloader is locked and i am not able to flash the official stock ROM
i have tried to download latest package from update and installed but not get success
I've seen many tutorials to solve this problem, but the thing is I've to unlock bootloader! My phone bootloader is still locked
What should i do now!
Experts please help me to sort out my problem!
Thank you.
I've heard xiaomi phone can use 'fastboot oem edl' even if it is not unlocked.
Maybe you can search something about that.
Hope that helps.
Good point. I have the same problem. I will try edl mode.
i am also getting this, have you solved?
---------- Post added at 11:48 AM ---------- Previous post was at 11:07 AM ----------
Reflashed using edl, problem still continues.
Edit, posted in wrong topic
You can try to use XiaomiTool and flash your phone with instead..
Check if your device is still encrypted, if not, that's likely the reason why it tells You storage is unsafe.
Is it solved? The same problem
Help
I had same issue. I unlocked bootloader, flashed twrp format data and then flash xioami eu and it works.
If you want to flash Global or other official you have to use miflash and tgz rom. If you, after flashing, see a corrupted memory try from fastboot the command:
fastboot format userdata
I also have this problem, but my status is strange. I use Xiaomi Flash Tool to flash the offical rom 10.3.4. When I boot to system, I get the error message, "find device storage corrupted your device is unsafe now". I flash the newest rom 10.4.3 from miui.eu, everything is good....><"
When I get this error, I have tried to enter fastboot mode and enter the command, "fastboot format userdata", but it's not work.
Have anyone also this problem and solution?
Were you able to find a solution?
imrankhp said:
Im using MI 6 since last two weeks i am facing Error "find device storage corrupted your device is unsafenow" and already it’s been reset two times!
the wifi is not enabling and some of sensors are also not working i am in very big trouble
the bootloader is locked and i am not able to flash the official stock ROM
i have tried to download latest package from update and installed but not get success
I've seen many tutorials to solve this problem, but the thing is I've to unlock bootloader! My phone bootloader is still locked
What should i do now!
Experts please help me to sort out my problem!
Thank you.
Click to expand...
Click to collapse
I have the same problem in my Mix2 having followed the instructions to move from the now stopped Global Developer ROM to the Global Stable. I followed the directions carefully and after unlocking the bootloader, flashed using the fastflash method choosing to lock the bootloader again. On starting up the phone, I have all the problems you describe, including no way of signing into my Mi account to reflash the phone. [email protected] have been contacted but their suggestions have not addressed the fundamental problem of the corruption also blocking my ability to log into the Xiaomi account to unlock the bootloader.
This has been a very good phone but now!!!
Did you find a way to unllock the bootloader? It seems to be a problem for quite a few people and it would be helpful to know if it is still worth trying to rescue the phone.
Thank you in advance. You described the problem very clearly,
Chris
On xiaomi mi 9t I installed
Code:
davinci_eea_global_images_V10.3.12.0.PFJEUXM_20190801.0000.00_9.0_eea_1d38ae0ec5
and
davinci_global_images_V10.3.11.0.PFJMIXM_20190802.0000.00_9.0_global_ea6683ef55
two times . device storage corrupted every time
3rd time installed davinci_global_images_V10.3.11.0.PFJMIXM but logged in with miaccount during first configuration and error is gone..
i have this problem in redmi note 8, after trying xiaomi.eu rom, i have flashed stock rom again via twrp and now i have that error.
is it solved already?
I have removed the problem, but I don't know the root cause. I install third rom and rollback to miui eu rom, then the problem is disappeared.
1. Install OmniRom(clean dalvik, cache, and internal).
2. Install magisk to root OS(clean dalvik, cache, and internal).
3. Boot to os and reboot to twrp.
4. Reinstall xiaomi.eu_multi_MI6_V10.3.1.0.OCACNXM_v10-8.0.zip.
5. Boot to OS and I find the problem is fixed.
mfpower86 said:
i have this problem in redmi note 8, after trying xiaomi.eu rom, i have flashed stock rom again via twrp and now i have that error.
is it solved already?
Click to expand...
Click to collapse
What's the solution?
ChrisX5 said:
I have the same problem in my Mix2 having followed the instructions to move from the now stopped Global Developer ROM to the Global Stable. I followed the directions carefully and after unlocking the bootloader, flashed using the fastflash method choosing to lock the bootloader again. On starting up the phone, I have all the problems you describe, including no way of signing into my Mi account to reflash the phone. [email protected] have been contacted but their suggestions have not addressed the fundamental problem of the corruption also blocking my ability to log into the Xiaomi account to unlock the bootloader.
This has been a very good phone but now!!!
Did you find a way to unllock the bootloader? It seems to be a problem for quite a few people and it would be helpful to know if it is still worth trying to rescue the phone.
Thank you in advance. You described the problem very clearly,
Chris
Click to expand...
Click to collapse
This is exactly the trouble I caused with my Redmi 3S Prime
I am also have the same problem in redmi 4x
, I restored perist partition it's fixed,
this error comes when revert back to stock or lower version custom Rom from Q based custom Rom.
Then I faced another problem weak network (reset the network every tower/ band changes) freeze my phone ? I don't know how to fix it? Some one please help me
imrankhp said:
Im using MI 6 since last two weeks i am facing Error "find device storage corrupted your device is unsafenow" and already it’s been reset two times!
the wifi is not enabling and some of sensors are also not working i am in very big trouble
the bootloader is locked and i am not able to flash the official stock ROM
i have tried to download latest package from update and installed but not get success
I've seen many tutorials to solve this problem, but the thing is I've to unlock bootloader! My phone bootloader is still locked
What should i do now!
Experts please help me to sort out my problem!
Thank you.
Click to expand...
Click to collapse
Well I got a solution from telegram group.
People having this problem can flash persist.img . But this worked on POCO F1 , don't know about other devices . Y'all can try and let other know.

Categories

Resources