Razer phone screen delay - Razer Phone Questions & Answers

Hello. I have a problem. My friend gave me two razer phones (cheryl). When i Touch the screen it wont do anything. When i hold my finger for 3 seconds and then move it it will do something. What do i have to do to fix this? Do i need to buy a new screen or is it something with the Software?
I also have a Video in youtube but i cannot link the Video becaus i am to new to do This.
Has somebody an Idea what i need to do?
Thx

Related

[Q] Touch Screen Problem

Recently I began to notice a problem with my phone. Whenever I have the keyboard slid out the touch screen is almost non-responsive. So over the past few days I've tried observing what the exact problem is and I think it could be the cable/ribbon that connects the touch screen to the keyboard. I'll have to tilt the screen back and forth before it will actually recognize me touching it. And I've noticed when I rub that ribbon it seems to work. There's also a crease in the ribbon where it folds on it when you close it. I believe this is the problem but I'm not sure and I want any advice/tips I can get. If it is the cable can you order a new one and replace it yourself?
Thanks in advance
Any ideas anyone? I cant get it to half work so I can text and stuff but I have to press it hard and it still wont work at times so something somewhere or another is wrong.
Tripp-phpBB said:
Any ideas anyone? I cant get it to half work so I can text and stuff but I have to press it hard and it still wont work at times so something somewhere or another is wrong.
Click to expand...
Click to collapse
Flash the stock ROM and SPL, and do a warranty exchange. This isn't a device you want to open up unless you really know what you're doing and are certain of the issue. If you really want to give it a go, then just buy a non-functioning unit from eBay to use for parts. They can normally be had for less than $40.
Wow, I cant believe that I finally found someone with the same problem as I have.
At first I thought that it was a software issue and I reloaded the software on my device.
The screen responds to presses with the keyboard in, but extended it doesnt respond and only the external keyboard works.
So to type a nice long sms I would have to start it on my display, flick out the keyboard to carry on and then flick it back in before I could press send or anything.
How frustrating.
But I did a test now and flicking the keyboard out and then slowly slowly pushing it back in I can get to a stage where both the external keyboard and screen responds at the same time again.
Definitely a ribbon problem or something.
Only had this phone for a few months now and if it already doing this then I am not feeling too obtimistic about its future.
Well, time to take it in for a warranty repair. I wonder how much greaf I am in for now.
Time to pull out my awesome trusty Artemis out the cuboard.
Tripp-phpBB said:
If it is the cable can you order a new one and replace it yourself?
Click to expand...
Click to collapse
I had a friend that had this problem with his TP2 which I've successfully repaired. First thing if you want to do it yourself, go to youtube and look for the Rhodium disassembly video (this will help you a lot). It is not difficult to change any parts in the phone provided that you proceed with caution and take the necessary precautions.
If you are afraid or have never opened up a phone to fix parts, then I would suggest to send it to HTC - this would be devastating if you managed to break up the motherboard by mistake or any other parts in the process of fixing the flex cable.
Tripp --
Did you ever find resolution to your problem? Recently my phone started having the same problem, which I originally thought was related to messing up the calibration file when I put loaded xdandroid GBX0A.
However, it sounds like my problem is pretty similar to yours -- touchscreen works fine when the keyboard is closed, but when it is open it only registers on the bottom of the screen -- which is actually useful in some sense because I can still hit the soft keys in the messaging app and such, but not so useful if you want to scroll using the touch screen. If I play around with the z-hinge a bit, sometimes it starts working -- which sounds like the same thing that you described.
Sorry, I just seen your post but I never fixed mine as I went ahead and bought another phone (Evo) but I did research the problem quite extensively and the problem I believe lies in the ribbon that connects the two halves of the phone. If I remember correctly the motherboard is in the side with the keyboard and that's why when it's slide out, the touch screen won't respond correctly. You can find the part online and replace it yourself. I've taken mine apart and it's not that hard but as said, you need the right tools and to be very careful.
Hi guys
I have tried all the above
Last resort is i got sprite backyup to work
BUT HOW THE HELL DO YOU HIT "NEXT" OR "OK" FROM THE KEYBOARD AS SCREEN DOESNT WORK????

[Q] HELP! White lines on black screen HTC Desire CM7

A few days ago I succesfully (at least I thought so..) flashed my Desire to Cyanogenmod 7 using Amon-ra and it worked perfectly, until today out of nowhere my screen is black with a couple of white lines from top to bottom. One minute it worked as normal, and a couple of minutes later when I pressed the top button to unlock it, the screen was all weird. The touch functions of the screen seem to work as normal, I can unlock the screen, shut it down, power it up, enter my pin etc (blindly) but I see only the vertical lines so it's hard to check what's going on. I do see that the lines "move" when something changes on the screen, like when I unlock it, I see that the screen does react on it, but only some lines appear, move or disappear. For the rest, the sound works as normal when I turn op the volume, as does the vibrating.
I have a PVT4 S-on (thats all I remember) if it makes any difference.
Picture is from a camera, not a screenshot. Looks a bit yellow or so but the background is black, and the lines are white.
Does anyone know what it caused and what I can do to fix it? Maybe reset it or reflash it someway?
Many thanks in advance!!
Where's the picture?
You might want to give HTC a ring.
Request from puntchiel, a picture of his mobile phone:
http://dl.dropbox.com/u/13976378/P1050923.JPG
Hm I forgot the picture, my friend len posted a link for me, for Im not yet able to do that cauz Im a nub
Thx len!
Yeh, send it to HTC or your carrier. It looks so ****ed
Well, sending it back and profiting from my insurance is my last option cuz I wont have it back for at least a month. Does anyone know what it could have caused or what could be a way to solve this highly annoying thing? I can't imagine that it is a hardware problem that occured this sudden... And the screen is reacting to my input but it only shows the frikkin lines! So I hope that it is a software problem. I just have no idea how to solve it, so thats why I'm asking the pro's on this forum
And btw, if I'm sending it back I need to make sure that they don't find out of the custom software on my device. That leaves me only two options I quess, fixing it or completely smashing it... So if someone at least knows how to use a RUU or something via my PC (without having to use the screen of my desire), your help is very much appreciated!!!
Meaple said:
You might want to give HTC a ring.
Click to expand...
Click to collapse
Ohh yeah thats helpful; i am sure he did not think to contact htc himself
That picture recalls bad experience with my ex Nokia 5800xm. I had to replace display.
Maybe it is not same case but it looks same.
I have exactly the same problem, flashed cm7 on my desire a few months ago.
Worked all fine.
Then yesterday all of a sudden i had a black screen with white lines.
Maybe you, puntchiel, have found any sollution?
I'm sorry Hanswurst, I had my ensurance company pick up my device and they replaced the screen, so I asume it was a hardware problem. I wish I could help you buddy. Good luck with it!

[Q] need to disable the touchscreen

Please can any one help.
My touch screen broke and riht now there is no way I can afford to get it fixed. I got an idea to buy a blue tooth keyboard witha touch pad and bang I was back in business. Now I could use it as a little home entertainment system.
About 2 weeks ago videos would randomly skip, volume would go up and down, apps would close and others open randomly. I did the show touches in settings and wow litterally all along the cracks you can see gost touches all the time. I asked once before for help and someone suggested flashing a blank driver for the touchscreen. I know I dont have the skill to try and take it to pieces and after a month I still cant seem to find a way to make this go away.
Soncould someone please help me out a kind dev who knows something so I could just flash a zip and boom no mpre touchscreen..
Thanks

Samsung Galaxy Grand I9082 Safe Mode problem after changing the touch screen.

Guys i just got problem with my Mobile i have changed the touch screen few times from repairing shop but every time it comes with a new proble. i just bought a new touch screen from the hardware shop and replaced it by myself. now touch is working fine but there is another problem it just starts in safe mod. i have restarted it many times but the problem remains the same. i checked it with the old touch panel and mobile starts in normal mod with that. can you guys help me out with this? I will be thankful to you guys. Sorry for my English.
I think you have bought an incompatible screen. try connecting older ones or buy a new one
While rebooting the phone keep tapping the left most button (what ever that is called). There is a Youtube video too.
I too faced a similar issue after replacing the screen and happens when you fiddle with the buttons when the phone is booting up.

Stuck in "welcome screen"

hi, my problem is a bit different from what i have seen surfing different forums of the zenfone 2, the complete story is my phone had ghost touch so i bought a new screen and replace it... easy, but the new screen (for whatever reason) lost sensitivity in the right 30% of the screen, the rest of the phone worked fine, i thought maybe reseting the phone i can solve this, well, didnt happened, and now i cant touch the green arrow to pass the FRP, i have some ideas to bypass it but i wanted to ask somebody with better idea of what to do, please help.

Categories

Resources