Hi, i'm using a mi max 3 but i suffer from Ghost Touch. I tried different roms but noy any solution.
Did anyone suffer from this? How to solve?
Thanks,
Andrés
Ghost touch on any device, much less on the Mi Max 3, is almost always a hardware problem.
You may try this, however I am very uncertain it will help.
It will most likely be the problem of a faulty assembly of the screen digitizer.
Please let me know if any of this helped.
Regards.
Related
My defy has a problem in the touchscreen on the left most side, I almost cannot type q or a (Tried Touch Test app and it shows the same, the touch doesn't extend to the left most side of the screen).
Besides, in so many times it just freezes until I turn the screen off and on again (and wait for the next freeze).
Checked on the forum, seems only one person other than me having the 2nd problem and none got the first.
Anyone can advise on a solution before I will take it to the service center?
Thanks.
Max
Protective case may cause the problem.
My defy is 'naked'...
The problem exists before I have the protection screen, it didn't go worse (or better).
Do you have any news?
Was it hardware related?
I have a note 3 900t, I took shop they charged me 270 replace screen and digitizer and it did not work, I rooted and used custom room and still does not work. I reset 1000 times.
My spen works, there is no damage to screen, but the touchscreen does not work with fingers..
Does anyone have imput or same issue?
How many digitizers are in the note 3?
daze28nyc said:
I have a note 3 900t, I took shop they charged me 270 replace screen and digitizer and it did not work, I rooted and used custom room and still does not work. I reset 1000 times.
My spen works, there is no damage to screen, but the touchscreen does not work with fingers..
Does anyone have imput or same issue?
How many digitizers are in the note 3?
Click to expand...
Click to collapse
I faced the exact same problem today after I updated to Kitkat (Mobile Odin method to keep root).
Touch Screen doesn't work, s-pen works flawlessly. It was working properly earlier.
A simple restart made it work. Sorry that it isn't working for you. But looking at what happened to me, it looks like a software problem, not a hardware one.
Samsung owners from entire world, and other galaxies, unite here and help me please! Help your brother in need
Ok, let me start with this,
I bought a note 2 n7100 couple of days ago, and I have problem, i don't wanna believe that I have to change entire display, because, it's way to pricy.
My touch screen reacts perfectly with stylus, and when I try to use my fingers, NOTHING :/ It won't react, i tried everything, from factory reset, to entire ROM change, but nothing happens :/ It still doesn't work with my fingers, stylus perfect, but fingers, nothing.
Please tell me that I can fix it somehow without entire display replacement, i googled it, but blank, tried every trick that i've found and still nothing.
Greetings
PS. I just need confirmation that it is hardware problem, and that I can kill all my hopes about fixing it any software way
Blaster_Bax said:
Samsung owners from entire world, and other galaxies, unite here and help me please! Help your brother in need
Ok, let me start with this,
I bought a note 2 n7100 couple of days ago, and I have problem, i don't wanna believe that I have to change entire display, because, it's way to pricy.
My touch screen reacts perfectly with stylus, and when I try to use my fingers, NOTHING :/ It won't react, i tried everything, from factory reset, to entire ROM change, but nothing happens :/ It still doesn't work with my fingers, stylus perfect, but fingers, nothing.
Please tell me that I can fix it somehow without entire display replacement, i googled it, but blank, tried every trick that i've found and still nothing.
Greetings
Click to expand...
Click to collapse
maybe you should search if only digitizer could be replaced. It is cheap compared to whole lcd
yaro666 said:
maybe you should search if only digitizer could be replaced. It is cheap compared to whole lcd
Click to expand...
Click to collapse
I doubt that it is possible, ive heard that digitizer is glued to the screen :/
Actually it is possible, search for 'LE55ONS' on youtube, he has a video that shows the complete disassembly of the Galaxy Note II's screen.
I heaved same problem, i think because condensation inside your phone.
Hi
I'm having a problem with a lite (T110) that I bought second hand. The digitizer wasn't working so I bought a new one, but the problem pre-existed my replacing the digitizer. The video below shows it, which you can see is intermittent, and hitting the power button twice in succession generally resolves it.
It's not a ROM issue, as I've tried a few ROMs. Kernel, I don't know. My best guess is that it's related to the flex cable that connects the LCD to the tablet. While changing I disconnected this flex, and tried to see if I could resolve the issue by touching it. The results were not conclusive. Sometimes I could, sometimes I couldn't.
Does anyone have a video/picture of the inside of a T110 that shows how the lcd flex is supposed to fit? Has anyone else experienced this problem and resolved it?
After I updated my Galaxy Tab S4 to Android 10 with One UI 2, the screen became like the picture attached. Now half of the screen is occupied by black and white stripes.
I contacted Samsung and tried all the possible troubleshooting solutions but in vain, the problem still existed.
I also started a thread on Samsung community about this issue, and I got a lot of replies about the same screen problem that happened with many people.
https://eu.community.samsung.com/t5...en-issue-after-android-10-update/td-p/1837825
Still no response from Samsung about that.
Please can you help me with this issue?
I got 100% same problem
I try downgrade and same
But mine its from damage during shipping, the glass covering the amoled is cracked but I hope the screen its not affected.
Now I'm waiting the HDMI to usb type c cable to arrive to see if its screen or motherboard problem
If I lock/unlock(power button) fast and many times the lines dissapear and works normall a while
Do you fix it or you find what is wrong?
Today the HDMI to usb type c cabe arrived from china
I connect the tablet to TV and seems that lines are only on amoled, unfortunately the screen seem to be faulty
Hi at all the community, and Merry Christmas, oh oh oh
I made this post because i want to clear the situation about this very diffused issue that occur on samsung tab s4. I'm going to buy a tablet in the same screen condition in the attached picture, but before i want to know if the problem is related to the screen only or it's an hardware issue that affect the motherboard.
Please if anyone has fix this, please share a solution because in internet there are tons of user that ask for that and i haven't found if it's a screen or motherboard problem.
Thanks and wish you a merry christmas to all the community
majdantonio said:
After I updated my Galaxy Tab S4 to Android 10 with One UI 2, the screen became like the picture attached. Now half of the screen is occupied by black and white stripes.
I contacted Samsung and tried all the possible troubleshooting solutions but in vain, the problem still existed.
I also started a thread on Samsung community about this issue, and I got a lot of replies about the same screen problem that happened with many people.
https://eu.community.samsung.com/t5...en-issue-after-android-10-update/td-p/1837825
Still no response from Samsung about that.
Please can you help me with this issue?
Click to expand...
Click to collapse
unfortunately this is not screen issue, this is RAM or CPU issue, i did a Reballing and RAM replacement on Customer's TAB S4 and the issue was solved.
MULTITECH on Instagram: "Galaxy Tab S4 with image issue, done. CPU reball and RAM replacement. #microsoldering #microsoldagembrasil #microsoldadura #microsoldagem"
24 likes, 2 comments - MULTITECH (@multitechrepair) on Instagram: "Galaxy Tab S4 with image issue, done. CPU reball and RAM replacement. #microsoldering #microsold..."
www.instagram.com
Thanks biohazard for your reply, i'm going to examinate the motherboard I really trust in yor words and is what i believe..
Anyway someone else can confirm after changing the screen this kinda of issue persist?
I want to clear the situation share your experience!
I can confirm what biohazard16 said, it's not oled screen problem or display coonection problem but hardware problem on the motherboard. I've tried to connect my tablet using MHL cable to a TV and the picture on the TV is perfect without any glitch, clear of any half screen issue. I've tried to install another original screen 100% working and i've still had the same half screen issue, it's not a screen problem.
I search a lot in internet for complete schematics or boardview for this Tab S4 but i've only found a service manual that doesn't help. If anyone have boardview or any other Oled pinout please post.
I think that Samsung after made a good tablet, wich a large amount of these have the same screen issue, must be release the complete schematics because people with good skills can repair a Project/Assembly mistake made by Samsung, but till now from Samsung 0 news.
At this point i want go through the problem and i've attached a picture of what IC need to be reball/resolder.
biohazrd16 or anyone can confirm i'am right?
I start thinking that reapir this kind of issue is like the 3rd secret of Fatima ;-)