Develop Bugs

Lollipop tethering (working)

Thanks to datawrhsdoc for translating the OP
datawrhsdoc said:
1. Root your phone
2. Either modify your existing APN to use IPv4 and adding 'dun' to the list of APN types, or create a duplicate APN with the same modifications
3. Set the modified/new APN as your default.
4. Download tether_counter_kill.txt from the OP's first post, and rename the file removing the txt extension (http://forum.xda-developers.com/showpost.php?p=59858654&postcount=1)
5. Install Smanager from Play Store
6. Navigate to tether_counter_kill from Smanager, and set both 'Su' and 'Boot' options. Run it (you won't need to do this again)
7. Start Mobile Hotspot on your phone, and connect to the hotspot from your devices
8. Immediately start a VPN client from your device(s) which will tether. VPN must redirect ALL traffic (e.g., TorGuard).
9. Enjoy unlimited WiFi tether
Click to expand...
Click to collapse
You can also try adding this to your build.prop (I don't know if this does anything):
net.tethering.noprovisioning=true
Click to expand...
Click to collapse
Idea for the script taken from:
http://forum.xda-developers.com/z3/general/lollipop-tethering-t3058923
This can be fixed permanently using the following procedure (UPDATE: no root required):
Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
Enable USB debugging under Settings -> Developer options
Connect the device with a USB cable to a computer with the Android SDK platform tools installed
Start an adb shell: adb shell
In the adb shell, run this command: settings put global tether_dun_required 0
Click to expand...
Click to collapse

RussianBear said:
Looks like the settings.db is on a lock-down. I can't access it via sqlite any longer. It says: "the database is currently locked by another process"
Any ideas? @autoprime ?
Quick Edit: was able to copy settings.db to sd card and open it up with sqlite. couldn't change any parameters, as sqlite would fc. Downloaded this guy (http://sqlitebrowser.org/) and made changes, then overwrote the one in data/data directory. We'll see how/if it works.
Click to expand...
Click to collapse
Any luck so far?

Fhuron said:
Any luck so far?
Click to expand...
Click to collapse
Nope, something over-writes the tethering back to "1" after each reboot. I'm sure @autoprime can figure this one out, as he did for KK.

You are right I'm on LG G2 with official T-Mo lollipop and I was able to edit settings.db...not with sglite but with SQLite Debugger.
After reboot, the changes i made to the tethering reverted back to dafault 1.

For those that want to use wireless tether, try the app from this thread (it's $2.5):
http://forum.xda-developers.com/note-4-tmobile/general/unlimited-wifi-tethering-t2914057
I'm more interested in making the usb tethering work. I'll try using IPv4 + vpn tonight. Pretty sure it's going to fail because of the tether.dun set to 1...
P.S. additional links:
http://forum.xda-developers.com/note-3-tmobile/help/tethering-fix-t3068545
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/help/unlimited-tethering-t3073884

Another quick update. The guide from here works for tether_dun settings: http://forum.xda-developers.com/z3/general/lollipop-tethering-t3058923
You can use this command in terminal emulator, pending you are rooted.
su
settings put global tether_dun_required 0
Click to expand...
Click to collapse
or those having issues with tethering. I tested it out today and had issues. It would connect but would not resolve dns. I have unlimited tethering on Three, it's always worked until now.
Doing this resolved my issues. I suspect this issue will be resolve by Three when an official uk build is released.
This can be fixed permanently using the following procedure (UPDATE: no root required):
Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
Enable USB debugging under Settings -> Developer options
Connect the device with a USB cable to a computer with the Android SDK platform tools installed
Start an adb shell: adb shell
In the adb shell, run this command: settings put global tether_dun_required 0
Click to expand...
Click to collapse

RussianBear said:
Another quick update. The guide from here works for tether_dun settings: http://forum.xda-developers.com/z3/general/lollipop-tethering-t3058923
You can use this command in terminal emulator, pending you are rooted.
Click to expand...
Click to collapse
anyone tested does this work with no tether tracking?

Uploading a tether_dun_required=0 script (needs root) that you can use with Smanager to either trigger it via a desktop widget, app, or set it on boot. Remove ".txt" from the end and navigate to it via Smanager. I will test tethering later tonight.
Make sure you click/select the SuperUser icon in Smanager's options.
You can also try adding this to your build.prop:
net.tethering.noprovisioning=true
Click to expand...
Click to collapse

Looks like we're money, at least on usb tethering. I will update the op.

any specific settings on Wifi Tether Router? I'm unable to get an SSID to show up using the instructions from wifi tether router's website.
updated APN to ipv4
ran script posted above..

rihc55 said:
any specific settings on Wifi Tether Router? I'm unable to get an SSID to show up using the instructions from wifi tether router's website.
updated APN to ipv4
ran script posted above..
Click to expand...
Click to collapse
Try using stock wifi tether and see if it's counting. I haven't used the other app yet.

RussianBear said:
Try using stock wifi tether and see if it's counting. I haven't used the other app yet.
Click to expand...
Click to collapse
Ohh okay. even better.. ill try it and report back. thanks
EDIT:
Strange, i cant even get an SSID to show up on the native hotspot now. I know it worked before -- i used it last Sunday. The hotspot turns itself off after like 30 seconds.

Okay.. So I did a factory reset because i didnt know how to fix my problem from my previous post.
Then I:
1) added the same APN as IPV5
2) did this:
Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
Enable USB debugging under Settings -> Developer options
Connect the device with a USB cable to a computer with the Android SDK platform tools installed
Start an adb shell: adb shell
In the adb shell, run this command: settings put global tether_dun_required 0
3) used the native tether app
I haven't tested it very extensively but from what i can tell, i am able to tether and it just shows up as normal data vs mobile hotspot. I transferred bout 600mb as a test. will test more later.
Thanks for your help RussianBear!
EDIT:
I lied. i think tmobile was delayed in reflecting my usage. it showed up today.

My hot-spot was broken by LP. Devices connect fine but have no Internet whatsoever. I'm able to USB tether without issues using PDANet and just selecting level 1 hide tether usage works fine. No needs for UA switching or anything like that. Just wish the WiFi tether worked, even if it's counting.

Could anyone help with step by step instructions. I am new at this and dont want to do anything wrong. Plus i dont see the script.

dreday3223 said:
Could anyone help with step by step instructions. I am new at this and dont want to do anything wrong. Plus i dont see the script.
Click to expand...
Click to collapse
Dre, are you rooted? Script is attached to the bottom of the first post.

RussianBear said:
Dre, are you rooted? Script is attached to the bottom of the first post.
Click to expand...
Click to collapse
I am. What exactly do i have to do? Where do i place that command? This is all very new to me and I'm not trying to mess up my phone so the simplest of instructions would be great.

dreday3223 said:
I am. What exactly do i have to do? Where do i place that command? This is all very new to me and I'm not trying to mess up my phone so the simplest of instructions would be great.
Click to expand...
Click to collapse
Download smanager from the playstore, download the script, then using smanager navigate to the script and run it. You will need to select the su icon from the smanager's script options. Let me know if/where you get stuck.

Script Works for WIFI Tether
It appears that this method is working for WIFI tethering as well. I watched an 11 minute Youtube and then emailed myself a 5.5MB Powerpoint. Here are my results:
Before After
Mobile Hotspot 92.2 92.4
Data 462.2 527.1
Not sure where that 0.2MB came from, but that's not much of my 5GB plan, so I don't much care.
Update 1: Figured out where the 0.2MB came from. My testing used all encrypted traffic over HTTPS, and TMO couldn't track it. I then ran a CNN.com video and the Mobile Hotspot counter spiked. Still not quite there yet.
Update 2: Enabled my VPN, and no traffic at all is being tracked by TMO. No user agent required. Yipee!!

datawrhsdoc said:
It appears that this method is working for WIFI tethering as well. I watched an 11 minute Youtube and then emailed myself a 5.5MB Powerpoint. Here are my results:
Before After
Mobile Hotspot 92.2 92.4
Data 462.2 527.1
Not sure where that 0.2MB came from, but that's not much of my 5GB plan, so I don't much care.
Update: Figured out where the 0.2MB came from. My testing used all encrypted traffic over HTTPS, and TMO couldn't track it. I then ran a CNN.com video and the Mobile Hotspot counter spiked. Still not quite there yet.
Click to expand...
Click to collapse
Are you using a vpn service or just agent switchers?

[Q] AT&T Tethering

I've been trying to tether (with the H810), but whenever I do I get the following error:
Authentication was unsuccessful.
There is a temporary network problem that prevents the enablement of the USB tethering function. Please retry later.
I've tried PDAnet and foxfi as well as easytether, none of them work.

I don't have an H810, but I'm on Cricket (using AT&T's network) and I just tethered my PC (I moved to Jersey for a 3 month IT contract) no problems...but not via USB. Just WiFi Hot Spot.

ugh stupid locked down carrier phones. I guess I might return my phone and grab the H815 instead.

Don't return your phone.
ixrs said:
ugh stupid locked down carrier phones. I guess I might return my phone and grab the H815 instead.
Click to expand...
Click to collapse
I got an unlocked unbranded H815 on release day here in the UK.
It's now rooted but as soon as I try to connect another device to it, web access gets blocked by the ISP.
I use the G4's Wi-Fi hotspot, not USB. My other phones, Samsung and HTC, rooted but running custom ROMs had the same problem new out of the box but worked fine once rooted, and running custom ROMs.
Does anyone know if G4's hotspot problem can be solved with a new ROM?
FYI, the mhl / HDMI connection to a monitor doesn't work either.
The mhl dongle used to connect to the monitor works fine with HTC's micro-USB.
I assume the G4 is also 5-pin (as opposed to Samsung's 11-pin).
Any ideas?

No problems with WiFi tethering on my AT&T variant.
Sent from my LG-H810

Farrys said:
FYI, the mhl / HDMI connection to a monitor doesn't work either.
The mhl dongle used to connect to the monitor works fine with HTC's micro-USB.
I assume the G4 is also 5-pin (as opposed to Samsung's 11-pin).
Any ideas?
Click to expand...
Click to collapse
Off topic but the G4 is not MHL, it's Slimport. Just tried my Slimport adaptor that I had from my G2 and it works just fine.
---------- Post added at 06:03 PM ---------- Previous post was at 05:56 PM ----------
Regarding tethering we have to differentiate between "legal" tethering on a plan that allows it (which only the carrier phones will do as they have to connect to the server to authenticate you) and tethering not using a carier phone and/or accessing the full pool of your plan's mobile data, for which the carrier may check the browser ID string and take you to an upsell page. Tethering apps can alter the string but will usually require root to work well or you can go through a VPN.

diamond12 said:
Off topic but the G4 is not MHL, it's Slimport. Just tried my Slimport adaptor that I had from my G2 and it works just fine.
---------- Post added at 06:03 PM ---------- Previous post was at 05:56 PM ----------
Regarding tethering we have to differentiate between "legal" tethering on a plan that allows it (which only the carrier phones will do as they have to connect to the server to authenticate you) and tethering not using a carier phone and/or accessing the full pool of your plan's mobile data, for which the carrier may check the browser ID string and take you to an upsell page. Tethering apps can alter the string but will usually require root to work well or you can go through a VPN.
Click to expand...
Click to collapse
My reply to diamond12
Thank you diamond12.
I'll order a Slimport dongle today.
Your rapid response saved me wasting more time on the HDMI problem.
Re: going off-topic, I use the hotspot of phone to connect a Tab-S 8.4 to the web, and via dongles, to a large HD monitor or TV. It therefore felt more efficient to collate the two, related issues, in one thread.
On data usage, yes you are right. The ISP doesn't allow tethering unless they can sell me yet more data packages.
I already have two separate data packages for the same line, one of which is unlimited, so I'm not being unfair to them.
The question was why when rooted HTC & Samsung devices can by-pass the ISP lock screen, the G4 gets blocked?
It's unbranded, bootloader unlocked, rooted four times and tested.
Maybe one of our bright contributors here can shine a light here?
---------- Post added at 09:37 AM ---------- Previous post was at 09:34 AM ----------
HaVoK C89 said:
No problems with WiFi tethering on my AT&T variant.
Sent from my LG-H810
Click to expand...
Click to collapse
Thank you for your response HaVoK.
You are lucky. Mine is an H815.
Wonder if other owners in Europe have the same issue with tethering getting blocked.

Try FoxFi?

LancerV said:
Try FoxFi?
Click to expand...
Click to collapse
FoxFi and similar won't work where web access is locked down by the ISP. I've tried.
My other devices connect fine, as I've explained above.
Thank you for your suggestion anyway.

Tethering works fine on cricket (att) with 815 here.

frigidazzi said:
Tethering works fine on cricket (att) with 815 here.
Click to expand...
Click to collapse
Yep, and I didn't have to use another program, just built in LG HotSpot function.

Yes the G4 is fine. You are lucky.
Root access alone didn't help. The issue here is the ISP lock.
I expect a de-odexed ROM will bypass that.

Yea, I returned my 810 for a 815. I'm on cricket, 815 works perfectly fine, the 810 doesn't work.

I got the AT&T 810 and the stock wifi tether works for me. I did follow the steps in this article though. Perhaps you can give it a try too?
https://pmf.silvrback.com/fixing-tethering-on-android-kitkat

just an FYI here are the correct instructions to get it to work on an AT&T H810:
1. Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
2. Enable USB debugging under Settings -> Developer options
3. Connect the device with a USB cable to a computer with the Android SDK platform tools installed
4. Start an adb shell: adb shell
5. In the adb shell, run these commands one by one:
settings put global tether_dun_required 0
settings put system tether_entitlement_check_state 0
reboot

ExTREmE99 said:
just an FYI here are the correct instructions to get it to work on an AT&T H810:
1. Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
2. Enable USB debugging under Settings -> Developer options
3. Connect the device with a USB cable to a computer with the Android SDK platform tools installed
4. Start an adb shell: adb shell
5. In the adb shell, run these commands one by one:
settings put global tether_dun_required 0
settings put system tether_entitlement_check_state 0
reboot
Click to expand...
Click to collapse
I assume this would work for a rooted H815 on T-Mobile?

i had no idea the H815, unlocked version still didnt allow you to do hotspots. give it a whirl. all those do is disable the network tethering checks. if tmobile checks tethering based on other things, then i cant say that it will work

ExTREmE99 said:
just an FYI here are the correct instructions to get it to work on an AT&T H810:
1. Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
2. Enable USB debugging under Settings -> Developer options
3. Connect the device with a USB cable to a computer with the Android SDK platform tools installed
4. Start an adb shell: adb shell
5. In the adb shell, run these commands one by one:
settings put global tether_dun_required 0
settings put system tether_entitlement_check_state 0
reboot
Click to expand...
Click to collapse
Would this work on the Verizon G4? (unrooted)

I have the 815t tethering works fine
Sent from my LG-H815 using Tapatalk

Tomyk89 said:
Would this work on the Verizon G4? (unrooted)
Click to expand...
Click to collapse
again, people that are asking if this works on your specific device, why dont you just try it? you dont need root. it takes all but 2min, and you can reverse it. just flip the flags back to 1, instead of 0

Unable to edit Sprint APN settings on Galaxy S9

Back on the S8 I was able to add "dun" to the end of the apn data profile for tethering but they are grayed out on the S9. I tried shortcut master and while I can get to it I just can't edit it. Anyone know of a way to do so? I'd like to have unlimited tethering and also if there's a way to turn off the throttling that would be great as well.

GrandMstrBud said:
Back on the S8 I was able to add "dun" to the end of the apn data profile for tethering but they are grayed out on the S9. I tried shortcut master and while I can get to it I just can't edit it. Anyone know of a way to do so? I'd like to have unlimited tethering and also if there's a way to turn off the throttling that would be great as well.
Click to expand...
Click to collapse
Nothing yet. As far as I know, you could flash the U firmware and that would allow it. I have been looking through some adb commands as well, trying to see if we could do it that way.

I went to add one and was finally able to select that one I added and I made sure to put the "dun" at the end and so far so good

GrandMstrBud said:
I went to add one and was finally able to select that one I added and I made sure to put the "dun" at the end and so far so good
Click to expand...
Click to collapse
How did you finally get it in add mode?

Can you try step 1-8 on this please? I know it says s7 edge but this also worked on s8 and now i'm wondering if it works on the s9. Thanks.
https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446

Chris2433 said:
Can you try step 1-8 on this please? I know it says s7 edge but this also worked on s8 and now i'm wondering if it works on the s9. Thanks.
https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446
Click to expand...
Click to collapse
Tried that. No luck

How are you trying to edit the value? I was able to change it on my Sprint S9+ using Shortcut Master Lite.
There's a thread in the 9+ forum where one person said he had to try several times (using SML) before it actually worked.

meyerweb said:
How are you trying to edit the value? I was able to change it on my Sprint S9+ using Shortcut Master Lite.
There's a thread in the 9+ forum where one person said he had to try several times (using SML) before it actually worked.
Click to expand...
Click to collapse
I have been trying with Shortcut Master...all grey.
It was editable on Day 1. But not since.

VandyCWG said:
I have been trying with Shortcut Master...all grey.
It was editable on Day 1. But not since.
Click to expand...
Click to collapse
I actually have it working now, using a modified version of the ABD command.
Gonna let it sit for a bit, it it keeps working, I'll post it.

Copying from my post in the other thread about this.
Serfrost said:
I have tried every random HiddenMenu shortcut, I have tried ADB CMD and trying to rewrite the APN by hand, I have tried going into the settings and going through Mobile Networks, I have tried mounting /system in the recovery menu, I looked into changing the CSC because it's linked to APN locking... I've literally tried it all.
PDANet+, FoxFi, EasyTether, ClockworkMod Tether ... none of them would work. They would automatically be stuck at 2mbps instead of my normal 30 to 40. Hiding tether/hotspot this way was NOT an option at all.
Specifically on my Sprint S9 and another S9+, I had to do it in this order:
1) Open the Shortcut Master Lite and open LTEFunctionalityTest
2) Open LTE APN Setting
3) Open an APN you want to change.
3) If it's greyed out, close everything and then restart from #1.
4) Edit APN Type, add ",dun" to the end.
5) When done editing, save, and you should be good to go.
If that doesn't work even after trying repeatedly (make sure Shortcut Master Lite is completely closed, etc) ... then you can try the following which allowed me to edit the APN on a sister Sprint S9+ phone:
1) Dialer App, ##3282# (DATA)
2) Edit
3) Sprint MSL for mine is 000000
4) APN Settings
5a) "APN" and "APN protocol" should be editable. Make a minor change, save your APN.
5b) Then change them back, save the APN again. Do this for each APN you want full access to.
6) Open the Shortcut Master Lite and open LTEFunctionalityTest
7) Open LTE APN Setting
8) If it's greyed out, close everything and then restart from #6.
9) Edit APN Type, add ",dun" to the end.
10) After you finish editing, save, and you should be good to go.
Note: You might want to do this for both APNs as one is for LTE & one is for Roaming.
Consider this working on a Sprint S9+ & Sprint S9 Snapdragon SM-G960U - 8.0.0 Oreo Build Feb 10th
Click to expand...
Click to collapse
I had to do this a third time after Factory Resetting my phone, the second set of steps let me do this very quickly.
Do not update your PRL or Profile in System Update, this will wipe out your changes.

This..............
1) Dialer App, ##3282# (DATA)
2) Edit
3) Sprint MSL for mine is 000000
4) APN Settings
5a) "APN" and "APN protocol" should be editable. Make a minor change, save your APN.
5b) Then change them back, save the APN again. Do this for each APN you want full access to.
6) Open the Shortcut Master Lite and open LTEFunctionalityTest
7) Open LTE APN Setting
8) If it's greyed out, close everything and then restart from #6.
9) Edit APN Type, add ",dun" to the end.
10) After you finish editing, save, and you should be good to go.
That worked for me...to a T!
Thanks!

VandyCWG said:
This..............
1) Dialer App, ##3282# (DATA)
2) Edit
3) Sprint MSL for mine is 000000
4) APN Settings
5a) "APN" and "APN protocol" should be editable. Make a minor change, save your APN.
5b) Then change them back, save the APN again. Do this for each APN you want full access to.
6) Open the Shortcut Master Lite and open LTEFunctionalityTest
7) Open LTE APN Setting
8) If it's greyed out, close everything and then restart from #6.
9) Edit APN Type, add ",dun" to the end.
10) After you finish editing, save, and you should be good to go.
That worked for me...to a T!
Thanks!
Click to expand...
Click to collapse
Using this method, APN is not editable for me. But the Shortcut Master Lite method worked fine. Maybe this would work if I hadn't already changed it via SML?

meyerweb said:
Using this method, APN is not editable for me. But the Shortcut Master Lite method worked fine. Maybe this would work if I hadn't already changed it via SML?
Click to expand...
Click to collapse
Trying to get hotspot bypass working... PDAnet works, but is spotty. I have edited my APN's successfully (I had to rename before I could edit). As well as added the ADB commands. I sort of have hotspot working...
When I disable M.data and enable hotspot AND am connected to WiFi, it enables and allows me to re-enable M.data. Hotpot will continue to work indefinately.... until I leave the WiFi connection. Then the Sprint M.data connects and tells me i am not subscribed to Hotspot service. If I am not in a WiFi area when I re-enable M.data, then it instantly goes to the hotspot subscription error.
EDIT: I just reconnected my phone to check settings in adb. The settings were reset to defaults:
tether_dun_required is '1'
tether_dun_apm is 'null'

If you turn on tethering while connected to wifi, you're not really tethering. You're just sharing the WiFi connection.

meyerweb said:
If you turn on tethering while connected to wifi, you're not really tethering. You're just sharing the WiFi connection.
Click to expand...
Click to collapse
I could not share the WiFi connection before I added dun to the APNs.
The real problem appears to be that the ADB settings edits are being reset somehow.

not working with Android 9 (PIE) update

Has any been able to figure out how to open the com.test.LTEfunctionality on Android Pie
I was able to edit the apn before using Quick Shortcut maker but now the com.test.LTEfunctionality cannot be opened.

Any update?

has anybody informed the developer of the app that it needs to be updated for PIE?

Apn settings greyed out
Turn off mobile network and connect to a wifi network(i used my printer wifi network which doesnt internet . I dont know if u can use any wifi or not) i restarted my phone a used mastershortcut and apn is editable again

How to enable Volte on Stock ROM - Help?

I spend days but cannot get volte provisioned on T-Mobile USA.
Things I've done so far
1. Volte Carrier check id already off via *#*#86583#*#*
2. Have temp root access but unable keep edited build.prop, reboot cause a restore of original build.prop, reference link here
3. Try QPST method from this thread and many similar ones, but PDC cannot recognize our phone even QPST see it fine and connected on a com port. Have to use su command "setprop sys.usb.config diag,adb " to make the connection.
Everyone have any ideas?

Your provider may need to enable it from their end as well.
At least that's what mine had to do before I could get VoLTE working.

IkkeZelf1000 said:
Your provider may need to enable it from their end as well.
At least that's what mine had to do before I could get VoLTE working.
Click to expand...
Click to collapse
That's not an option, T-Mobile and all US carriers will not do that, tried already.

It worked for my Familys Phone A2 Lite with Android 9 (don't trust Android 10 update many reports of bugs)
with *#*#86583#*#* then you see HD Symbol in right corner. Your Provider must support VoLTE also some Providers in my Country they only enabled it for certain mobile plan.

Question TTL, APN, and Hotspot Setting Help(AKA Free & Unlimited Native Hotspot)

Hello
I'm going to start off with I don't think there is a resolution to my problem but maybe someone knows a different method.
I have the US Unlocked ZFold 4 (SM-F936U1)
What I have been able to do so far.
1. Setup Custom APN to add "dun" to the "APN Type" setting
2. Add IPv4 support back into the custom APN
3. Changed TTL on the client (In my case Windows 11 via reg edit method)
Method:
In Reg Edit go to -> HKEY_LOCAL_MACHINE subtree, go to the following key: \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Add REG_DWORD "DefaultTTL"
Set to 65(dec)
4. Profit
This lets me use the Native hotspot without a cap or even paying for it .....HOWEVER. Having to change the TTL on each client device is such a pain or not even possible on say an XBOX or Smart TV. I want to be able to change it on the phone directly but there does not seem to be a way with out root.
There is a Terminal Command that seems to do this "cat /proc/sys/net/ipv4/ip_default_ttl 65" but I get an error and I think this is because you need root to make this change.
Are there any ways to change this or am I just stuck only being able to use the hotspot on clients I can change the TTL?

81 Views no replys :/ as I assumed no way to change this.
Maybe this can change going forward. Until then I want for a root method for the US unlocked version.

xVoidx said:
81 Views no replys :/ as I assumed no way to change this.
Maybe this can change going forward. Until then I want for a root method for the US unlocked version.
Click to expand...
Click to collapse
I can't change the apn
Unlocked fold 4 USA variant

Poopnasty said:
I can't change the apn
Unlocked fold 4 USA variant
Click to expand...
Click to collapse
You can't change the current APN but you can add a new APN and manually copy in the same thing for each field. Verify it works first before making any changes. It should work without issue as long as you copy everything exactly as it is from the one you can't edit. From there you can add "dun" to the APN type field and it will work with the native hot spot. Keep in mind you need to change the TTL on the client device you are connecting to the hotspot. This is not always possible, however it is on a Mac or a PC.