This morning i woke up and for whatever reason i attempted once again the request for permanent unlock of my MetroPCS LG Q7+ through the MetroPCS Unlock App. This time it worked, and it was approved and unlocked. Does this allow us to custom rom and root?
It's a carrier unlock to use any sim other then MetroPCS.
Related
Hi.
I am unsure if my phone is unlocked and can proceed with porting my number over to Metro PCS. Please help me with advice how to proceed. I decided to move my service to Metro PCS since they are now a Tmobile company and after lots of research, I found that I can use my current phone/software as long as it was unlocked. I recently purchased my Galaxy s4 second hand and assumed it was not unlocked. I had immediately rooted it and flashed a new rom (Insane Kitkat 4.4.4). The phone has been working well. I already have requested and have my unlock code from Tmobile.
When I went to the Metro PCS store to port over my number, the phone did not request an unlock code when inserting their Metro PCS sim card (not activated). They said that my phone may already be unlocked or that it may not need to be unlocked since Metro is now owned by T-mobile. They stated that it may work if they go through the entire registration process, port over my number and activate it but that it would be a gamble. If it did not work, then I would not be able to go back and reactivate my sim immediately with Tmobile since it would then be in deactivated status with them.
I tried to find out if it is already unlocked by *#7465625# but my phone will not run this or any other USSD codes to verify. I keep getting errors when trying any USSD codes. A message says 'USSD code running' then "unable to process request".
A friend of mine has an activated Galaxy S4 on Metro PCS and I tried inserting her sim card to prompt for the unlock code but my GS4 just booted normally then showed 'not registered on network'. It did, however, have cellular signal bars. When I inserted my Tmobile sim into her GS4 it did ask for the unlock code normally.
I am at a loss now..
funny, I like to know if there is a way to check carrier unlock status for simcard without having to put a simcard in.
T-Mobile phones work with metropcs without the need to unlock
Could the custom rom be suspect?
Maybe need a stock rom to get carriers sorted out, then go to custom roms.
Pp.
serio22 said:
T-Mobile phones work with metropcs without the need to unlock
Click to expand...
Click to collapse
I ended up contacting Tmobile and they stated that the phone showed unlocked status already but I think you are correct. I wasn't aware they could tell me this. It was very fast and super easy to find out.
I have the phone working great on Metro PCS now. USSD codes still failing though...
So, I just bought a new G3 from my carrier Vodafone Romania and wanted to unlock it so I can use it with other gsm carriers when I'm abroad.
Before buying a sim unlock code I wanted to make sure that it can be unlocked. So I popped in an Orange SIM and it worked without asking me for a code. Then I tried the other method by typing in the dialer 2945#*855# and got "the phone is permanently locked and cannot be unlocked".
How can this be? It's unlocked but permanently locked? Or this is the message you get after successfully unlocking?
Any insight will be appreciated.
I don't know if this matters but I'm rooted and twrp bumped on v20h
I called and got my phone's unlock codes (domestic) however Sprint declined to provide how to unlock instructions. told me to go to my future carrier and give them the unlock code.
I called T-Mobile current provider and they told me... no Sprint can unlock and TMo, doesn't know how.
so I am stuck with legitimate Sprint unlock codes... and no idea how to use them.
Someone knows how this works here or it's better off just flash customs rom and unlock XDA way?
Thanks,
When you insert another carrier's SIM (in this case, T-Mob) it should ask for the code, then you just enter it.
Custom ROM isn't going to help you unlock the SIM, nor is there a working "hack" to do so without a code.
Thanks for your reply,
I've tried ATT, TMO sim and the phone does not ask for sim unlock code... it just says contact customer care.
or if someone knows how to get the phone to ask me for SIM/UICC unlock code... some hot keys to press, that can help too since I have the codes from Sprint.
**i am also reading about Sprint Sim unlock on One M8, so complicated!!!**
If you talking about the following mods, they are for unlocking the bands, which AFAIK is not the same as SIM (subsidy) unlock:
http://forum.xda-developers.com/htc-one-m8/general/unlock-bands-qualcomm-device-phone-t2880239
http://forum.xda-developers.com/htc-one-m8/general/how-to-convert-cdma-m8-sprint-vzw-gsm-t3303812
yeah, can't find a way to unlock sim to use w/ T-mo ATT. strange... I have the codes from Sprint and no one's done it? good thing I got HTC 10 factory unlocked this time no such problem later on
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Akosp said:
AT&T has given me an unlock code to release the phone so i can use it on sprint. The instructions say that a prompt should appear when putting in the sim, but nothing has happened. I was wondering if there was a way to force the prompt so I can input the code.
I'm on ICE rom, could that be a reason why I'm not getting the prompt? Can I go to the AT&T store with the unlock code and have them sim unlock it?
thanks.
Click to expand...
Click to collapse
Are you sure the phone is locked to AT&T? You title says "Unlocked HTC 10....". Your device could already be unlocked. Also, which sim card are you inserting and expecting code prompt to appear?
This is how it is normally done:
Lets say your device is locked to AT&T at the moment. You have to put another carrier's sim card(T-Mobile for example), then the code prompt should appear on the screen asking for the code.
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Wonders_Never_Cease said:
Att never carried this phone...so how could they give you an unlock code? None are simlocked to ATT.
Click to expand...
Click to collapse
yeah I didn't know they did simlock either but I guess when you use a phone on their network it does.
when I tried to activate on sprint they said I had to take care of the att lock first. I have the unlock code but no idea where to use it. do I need to do something through the dialer?
Put Sprint sim in the device boot it up... IF theres a lock on the sim slot, it should ask for an unlock code which is input through the dialer when prompted
Akosp said:
The guy I originally bought the phone from purchased the phone from HTC.com, which he then activated on att. when I bought the phone from him and tried to activate it on sprint, sprint told me the phone was carrier locked to att and I would have to request for an unlock code.
my unlock release went through and they emailed me the code, but when I put in my sprint sim card that sprint sent to me, there is no prompt that appears where I can put the 8 digit unlock code.
Click to expand...
Click to collapse
If device was bought from htc.com, then it should be unlocked already. I believe the radio frequency in your phone may not be fully compatible with Sprint.
Just check HTC's website and you will see that they offer separate models for Verizon and Sprint. - http://www.htc.com/us/go/buy-htc-10/
For example I have a T-Mobile service, so I purchased an unlocked HTC 10 which is compatible with AT&T as well. If I would have another carrier, such as Verizon or Sprint, then I would choose accordingly.
Dear Friends,
I have Samsung S8+ with Device Unlock App for T-Mobile USA,
Its not stolen or reported black list however when i enter the IMEI on the T-Mobile official web site its status is blocked.
Regarding this issue if i will use a service my phone can be unlocked.
One more thing i have tried to change the firmware to G955U1 and i succeeded.
every time i enter the home screen this message "enter the network unlocking code" prompts out,i already ordered unlock code and inserted then it said:network unlocked successfully however its still locked on tmobile,i dont know what to do next regarding these givens above if any one have a solution for my issue indeed i need your help.
Thank you all
Thanks and many regards
Magika10 said:
Dear Friends,
I have Samsung S8+ with Device Unlock App for T-Mobile USA,
Its not stolen or reported black list however when i enter the IMEI on the T-Mobile official web site its status is blocked.
Regarding this issue if i will use a service my phone can be unlocked.
One more thing i have tried to change the firmware to G955U1 and i succeeded.
every time i enter the home screen this message "enter the network unlocking code" prompts out,i already ordered unlock code and inserted then it said:network unlocked successfully however its still locked on tmobile,i dont know what to do next regarding these givens above if any one have a solution for my issue indeed i need your help.
Thank you all
Thanks and many regards
Click to expand...
Click to collapse
If the T-Mobile site says it's blocked, then it is blacklisted. Sorry, it won't work on any network. You need to call T-Mobile and ask why it's blocked.
And the only way to network unlock the T-Mobile S8/+ is with the T-Mobile unlock app. Flashing the unlocked firmware and then entering an unlock code won't work. T-Mobile has to be the one to unlock it, and it has to be initiated through the app.
Mr. Orange 645 said:
If the T-Mobile site says it's blocked, then it is blacklisted. Sorry, it won't work on any network. You need to call T-Mobile and ask why it's blocked.
And the only way to network unlock the T-Mobile S8/+ is with the T-Mobile unlock app. Flashing the unlocked firmware and then entering an unlock code won't work. T-Mobile has to be the one to unlock it, and it has to be initiated through the app.
Click to expand...
Click to collapse
Sorry but now TMB can be unlocked through reading codes no need for unlock app, plus if the imei is blacklisted @ TMB so it is blocked for TMB only which means if he use AT&T sim after unlock it will definitely work !!!
instrumentaly said:
Sorry but now TMB can be unlocked through reading codes no need for unlock app, plus if the imei is blacklisted @ TMB so it is blocked for TMB only which means if he use AT&T sim after unlock it will definitely work !!!
Click to expand...
Click to collapse
That's absolutely false. If it's blacklisted through T-Mo, it's blacklisted for all US carriers.
And what's your source saying you can use unlock codes on T-Mo? Because no one here has been able to do that. Many people have lost money buying useless codes for T-Mobile.