My AT&T unlocked note 10+ it's not getting the ota update or any update to be honest. It says Anndroid security patch level July 1,2019. So I downloaded the XAA android 10 firmware from Sammobile and wanted to know how can I update via Odin. And if I do the update will it wipe my data or also media ? I don't want to do a reset of the phone
You can flash using Odin and HOME CSC file. This should not wipe your data. If that doesn't work, you have do with it with the Non HOME CSC file which will wipe it all.
Install Note 10 drivers. Load Odin. Load each file and click start.
Related
Hello
I was in the previous version of this firmware N7100XXDMG1 Which is 4.1.2 JB.
I tried to update this Version (Previous one to mentioned one) But I can't Through Kies.
Now, I flashed that through Odin By downloading it from Samfirmware and Successful.
But now also I connected it It shows the same message that:
Your Device's Current Firmware version is not supported to update firmware via kies.
What to do?:crying:
Regards,
SuperBoy123.
superboy123 said:
Hello
I was in the previous version of this firmware N7100XXDMG1 Which is 4.1.2 JB.
I tried to update this Version (Previous one to mentioned one) But I can't Through Kies.
Now, I flashed that through Odin By downloading it from Samfirmware and Successful.
But now also I connected it It shows the same message that:
Your Device's Current Firmware version is not supported to update firmware via kies.
What to do?:crying:
Regards,
SuperBoy123.
Click to expand...
Click to collapse
Your device status in about phone must be "Modified"..that's the reason u can't update from kies which was the same situation with me..
SeNt frOm my A\/\/€$♡/\/\€ NoTE 2 using xDa premium app
You need to unroot. Use triangle away to reset counter and then flash stock again and then factory reset. If your not rooted then I dont know.
Sent from my GT-N7100 using xda app-developers app
superboy123 said:
Hello
I was in the previous version of this firmware N7100XXDMG1 Which is 4.1.2 JB.
I tried to update this Version (Previous one to mentioned one) But I can't Through Kies.
Now, I flashed that through Odin By downloading it from Samfirmware and Successful.
But now also I connected it It shows the same message that:
Your Device's Current Firmware version is not supported to update firmware via kies.
What to do?:crying:
Regards,
SuperBoy123.
Click to expand...
Click to collapse
Please let me know the status shown in download mode and also the system status in About Device > Status .Device Status.
then I may be able to help you
I Can't
Boymysterio29 said:
You need to unroot. Use triangle away to reset counter and then flash stock again and then factory reset. If your not rooted then I dont know.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I have Rooted My Galaxy Note 2 With CWM-Root_package.
I installed Exynos Abuse Previously.
My Brother Unkowingly Pressed Unroot as it is a game.Then, Thats all.
I can't Go into Recovery Mode also.:crying:
Only Download Mode Is working.
superboy123 said:
I have Rooted My Galaxy Note 2 With CWM-Root_package.
I installed Exynos Abuse Previously.
My Brother Unkowingly Pressed Unroot as it is a game.Then, Thats all.
I can't Go into Recovery Mode also.:crying:
Only Download Mode Is working.
Click to expand...
Click to collapse
Since you've rooted you will not be able to update official firmwares from samsung through kies or OTA.
If you still require to update through kies first you've to unroot and the device status to normal. Follow the below instructions and you'll be fine.
1) installed pre-rooted firmware or root it again
2) Use Triangle away to reset counter Mod
3) Use titanium backup to wipe data from Enterprise Sysscope and Sysscope ( Sysscope may be frozen so, de-frost it and then wipe data).
4) Format the Ext SD card as it may contain some backups which might trigger the modified status
5) Use Root explorer to delete busybox from system/xbin/busybox (Since full Unroot will not delete busybox, the Sysscope will scan the phone for this after boot and change the Status to modified)
6) Full unroot using Super user
7) Reboot and enjoy
Hi All,
I'm facing a similar issue on my Note II.
I used Dr Ketan's guide to root and reverted the firmware to a UK stock early this year but has since gotten a
"Your device's current firmware version is not supported to update firmware via Kies"
My device is now unrooted and counter is reset (status is normal).
According to my research, this could be due to a CSC mismatch but can't find anything wrong with it.
This is what I'm on at the moment,
AP: N7100XXDME6
CP: N7100XXDMF1
CSC: N7100OXDMF1
It's the lastest UK stock firmware but I had to install it using Odin instead of Kies.
Any suggestions will be greatly appreciated.
Cheers.
That's strange, i have a rooted phone, made with chainfire autoroot method, and i just upgrade the firmware with kies without any trouble. No unroot and no wipe before update. It's a stock firmware with root.
manlyman said:
Hi All,
Any suggestions will be greatly appreciated.
Cheers.
Click to expand...
Click to collapse
Try using * # 272 * your IMEI #
This will pop up a list of CSC. Choose your original one and it should be okay.
Note: Changing the CSC using this method will factory reset your phone without any warning
Download and install Kies 3. Connect the phone. Kies will inform you that the connection failed. Leave the device plugged in and go to the menu bar, tools, reinstall device drivers. Leave the phone connected while the device drivers reinstall and it should work from there.
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
where is home csc,there is only 4 but must have 5 to flash...
imenko79 said:
where is home csc,there is only 4 but must have 5 to flash...
Click to expand...
Click to collapse
It's same as csc, if you flash home csc it doesn't wipe. If you flash only CSC, it wipes your phone. You select one of them, you can't flash both.
And as you see, I succesfully flashed an older firmware. The problem is that odin can't flash the newest firmware.
y.erenbektas said:
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
Click to expand...
Click to collapse
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
dezborders said:
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
Click to expand...
Click to collapse
I'll give this next weekend. Thanks ^^
I was on stock android 9
Downloaded OTA android 10 and installed but got bootloop
Thn downloaded firmware of android 10
And flashed with Odin with Home CSC, flashed successful but still bootloop
Don't want to loose data on the internal
Any way to recover it, i can't trip knox
Also read somewhere that sideload latest OTA will fix it. So anyone can provide OTA or OTA link?
I can't find it anywhere, need OTA file and not odin files.
Please anyone can provide it
You have to do factory reset to get it working.
You have A505F or A505N ? or you have another model ?
Because for 2 models is in this moment. F and N ...
just flash android pie latest version via odin with all 5 files, boot up the phone, copy ur data, factory reset, install 10q via odin with all the files. tested my self on a505f
My A505F has official INS firmware, if I flash any other firmware like PAK firmware by selecting home csc option in odin, will my data be wiped out??
Hello everyone,
I have rooted my S10+ using Magisk manager and stock samsung SW. but now when Samsung releases security patches every month, how do I install them on my phone while preserving root and user data?
so I follow the same workflow as initial root, but with HOME_CSC?
or do I follow do magisk uninstall-OTA update-Magisk reinstall method?
if I missing something obvious, please excuse me. This is my first time.
You rooted the stock rom, so to update:
1. Reflash the new release through odin
2. Reflash TWRP
3. Reflash magisk.
Not sure if sideloading update.zip would work, as i havent tried it.
Might be better off with a Stock based Custom Rom.
Ok so for any one who run into same situation like mine, I did the update to latest sock FW and ti was quite straight forward.
1. Download new stock FW using Frija
2. Transfer the new AP file to phone and patch using Magisk.
3. ADB pull the patched tar file.
4. Flash this tar file as AP along with BL, CP and HOME_CSC.
Update complete.