Related
Hello Gang,
After flashing the latest Firmware (4.2.2) for the Galaxy Grand L, in my Recovery Mode I get this RED PROMPT:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm version
! [VHX_21nm_3bitMLC_8GB_p10]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have been noticing some unusual problems:
- Phone will not allow me to install by app backups...it hangs
- If I try to restore an exported .zip from Titatium via CWM...it hangs and reboots
- People are having install issues...i have to format all directories for this to install and run.
Input?
hey any satisfactory replies yet?
Paul_Days said:
Hello Gang,
After flashing the latest Firmware (4.2.2) for the Galaxy Grand L, in my Recovery Mode I get this RED PROMPT:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm version
! [VHX_21nm_3bitMLC_8GB_p10]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have been noticing some unusual problems:
- Phone will not allow me to install by app backups...it hangs
- If I try to restore an exported .zip from Titatium via CWM...it hangs and reboots
- People are having install issues...i have to format all directories for this to install and run.
Input?
Click to expand...
Click to collapse
same problem wid me...try flashing ur own countries stock firmware and do tell me if theres another way working out 4 u
I also have this problem DOwnload Mode, I'm from Argentina and I have installed the correct version of firmware for my country, I tested other like Chile and the same appears. The only problem that brought me was that the phone was walking too slow, but perform a clean installation format / system / data / sdcard in CWM etc and then again flash with ODIN and walk fast ... but message red in DOWNLOAD MODE still appears
Owww? I thought I was the only one. When I use the cpu identifier app from playstore it shows that my device is made by baffin while im on stock ROM from my country. X_X
Best Regards,
Prince Paolo Miarkle Gast
Samsung Galaxy S
Samsung Galaxy Grand Duos
Samsung Galaxy Note 2
Stock ROM
johntheredimid said:
I also have this problem DOwnload Mode, I'm from Argentina and I have installed the correct version of firmware for my country, I tested other like Chile and the same appears. The only problem that brought me was that the phone was walking too slow, but perform a clean installation format / system / data / sdcard in CWM etc and then again flash with ODIN and walk fast ... but message red in DOWNLOAD MODE still appears
Click to expand...
Click to collapse
Same thing happened to me after a full wipe, and fresh install, no restores from previous backups. Still want kinda of a more official answer to why this is happening. I know there are CSC tools out there, then again, i remember that Samsung is starting to implement "Region Locks" for future phones....
Hello Guys,
I experienced this "red text" on my Galaxy Mega 5.8 and flashing back to an older firmware will remove the text. I don't have Grand anymore so I cannot test. I think this is a new feature of the resent fw.
bongski55 said:
Hello Guys,
I experienced this "red text" on my Galaxy Mega 5.8 and flashing back to an older firmware will remove the text. I don't have Grand anymore so I cannot test. I think this is a new feature of the resent fw.
Click to expand...
Click to collapse
hi there, i have the same problem here. my galaxy mega 5.8 suddenly have a poor performance and full of lag after the red text appears. i do full wipe and back to previous firmware but i have no luck, the red text still appears and it makes my galaxy mega very low in performance. anyone have the same problem? i use ODIN 3.07 to flash the new/old FW.
regards
firlando said:
hi there, i have the same problem here. my galaxy mega 5.8 suddenly have a poor performance and full of lag after the red text appears. i do full wipe and back to previous firmware but i have no luck, the red text still appears and it makes my galaxy mega very low in performance. anyone have the same problem? i use ODIN 3.07 to flash the new/old FW.
regards
Click to expand...
Click to collapse
this is Grand thread so I'll be brief. Flash the MJ2 firmware for the megar 5.8 from samsung-updates and the red text will be gone. Do a full wipe including dalvic.and internal memory. Good Luck.
bongski55 said:
this is Grand thread so I'll be brief. Flash the MJ2 firmware for the megar 5.8 from samsung-updates and the red text will be gone. Do a full wipe including dalvic.and internal memory. Good Luck.
Click to expand...
Click to collapse
[Out of topic]
since grand duos and mega duos have same characteristics.
I am sorry for the Thread starter. I do flash with MJ2 but the red text never gone. and also do full wipe including delvic cache and internal memory.
regards
bongski55 said:
this is Grand thread so I'll be brief. Flash the MJ2 firmware for the megar 5.8 from samsung-updates and the red text will be gone. Do a full wipe including dalvic.and internal memory. Good Luck.
Click to expand...
Click to collapse
OT
What happened to your I9082L
/OT
Sent from my GT-I9082 using Tapatalk
I also get these Message in Download Modus, but i am not able to flash thriugh odin anymore at all.
Any solution to go back to my original stock rom ?
akiratoriyama said:
OT
What happened to your I9082L
/OT
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
I gave away my i9082 last Christmas.....
Paul_Days said:
Hello Gang,
After flashing the latest Firmware (4.2.2) for the Galaxy Grand L, in my Recovery Mode I get this RED PROMPT:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm version
! [VHX_21nm_3bitMLC_8GB_p10]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have been noticing some unusual problems:
- Phone will not allow me to install by app backups...it hangs
- If I try to restore an exported .zip from Titatium via CWM...it hangs and reboots
- People are having install issues...i have to format all directories for this to install and run.
Input?
Click to expand...
Click to collapse
flashing again with Jelly Bean (4. 1. 2) firmware..
problem
My galaxy grand duos showing current emmc firm version unknown
Help me out guys....because of this I can't flash cwm on my phone
Achu angelo said:
My galaxy grand duos showing current emmc firm version unknown
Help me out guys....because of this I can't flash cwm on my phone
Click to expand...
Click to collapse
Follow the already answered same prob solution.
Paul_Days said:
Hello Gang,
After flashing the latest Firmware (4.2.2) for the Galaxy Grand L, in my Recovery Mode I get this RED PROMPT:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm version
! [VHX_21nm_3bitMLC_8GB_p10]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have been noticing some unusual problems:
- Phone will not allow me to install by app backups...it hangs
- If I try to restore an exported .zip from Titatium via CWM...it hangs and reboots
- People are having install issues...i have to format all directories for this to install and run.
Input?
Click to expand...
Click to collapse
Try this:
https : // www . youtube . com / watch?v = k52amOYH6XE
Hey guys, I'm currently having problem with my note 8.0 iI tried installing cm11. Downloaded and followed the steps but after wiping and formatting all the stuff that was in the step I'm having this prob see pic below. It says that I'm using n5110 instead of n5100. Now it keeps rebooting and nothing can be done anymore as I already format everything.. and yea forgot to backup ofc ...
amersnap said:
Hey guys, I'm currently having problem with my note 8.0 iI tried installing cm11. Downloaded and followed the steps but after wiping and formatting all the stuff that was in the step I'm having this prob see pic below. It says that I'm using n5110 instead of n5100. Now it keeps rebooting and nothing can be done anymore as I already format everything.. and yea forgot to backup ofc ...
Click to expand...
Click to collapse
I assume you did not install a custom recovery???
If you did you need to download the right firmware package and load from the recovery.
You may try Odin 3.7 if you can manage to get into stock firmware upload.
Its not bricked - your recovery is probably a cwm - flash twerp if you want to install cm11 - or stock recovery..anyway cm11 is great but no phone...so not great for us 5100
gooberdude said:
I assume you did not install a custom recovery???
If you did you need to download the right firmware package and load from the recovery.
You may try Odin 3.7 if you can manage to get into stock firmware upload.
Click to expand...
Click to collapse
How do I install custom recovery? What do you mean? Download stock firmware? How do I install odin. Now when I connect to pc.. it cannot be detected anymore
kzintz said:
Its not bricked - your recovery is probably a cwm - flash twerp if you want to install cm11 - or stock recovery..anyway cm11 is great but no phone...so not great for us 5100
Click to expand...
Click to collapse
Thw note cannot be detected anymore in pc. How do I flash or root again :3
Download and install Odin 1.85 next search the stock firmware for your model here http://www.sammobile.com/firmwares/
Get your Note into download mode ( Press and keep holding the Volume Down, Home and Power ) and connect it to your PC, Odin should "see" it the first slot under ID:slot should turn a different color if so you are in good shape, now put the Firmware you download from above mentioned site click PDA*button and select the downloaded .tar.md5 file, Important: In Odin, make sure Auto Reboot and F. Reset Time options are enabled. Also, ensure that the Re-partition checkbox is not enabled and hit start and let Odin do the rest and you should be up and running in no time and now you can start over from scratch
Sent from my SPH-L900 using xda premium
amersnap said:
Hey guys, I'm currently having problem with my note 8.0 iI tried installing cm11. Downloaded and followed the steps but after wiping and formatting all the stuff that was in the step I'm having this prob see pic below. It says that I'm using n5110 instead of n5100. Now it keeps rebooting and nothing can be done anymore as I already format everything.. and yea forgot to backup ofc ...
Click to expand...
Click to collapse
Did you fix the problem?
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
ah_hin said:
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
Click to expand...
Click to collapse
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
moonbutt74 said:
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
Click to expand...
Click to collapse
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Help
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
erikaj28 said:
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
Click to expand...
Click to collapse
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
ah_hin said:
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
Click to expand...
Click to collapse
Awesome! Thanks a ton!
Flash Files For Tab 3 Kids HELP
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
RK KINGKONG said:
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
Click to expand...
Click to collapse
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
how do i flash the full stock rom
ah_hin said:
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
Click to expand...
Click to collapse
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
RK KINGKONG said:
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
Click to expand...
Click to collapse
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
gr8nole said:
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
Click to expand...
Click to collapse
got you and thank you for your time .. now does this other file even matter usually they dont come in these tar zips
SS_DL.dll whats that for
Same situation. I rooted it fine. Installed a custom rom. No issues. Then it asked to update the supersu binary. Did that and now it keeps booting into TWRP no matter what I do. Gonna start fresh and this time I'll not use TWRP to update the binary I guess.
To fix the booting in recovery
flash stock recovery with oodin
now go to stock recovery
select clear cache
it will show error (and recovery crashes) and tab will boot normally.
Hi,
SM-P600 without ROM, without recovery, Kies and Odin doesn't work.
How can I reflash stock ROM or CM12 rom ?
Device : SM-P600 (with samsung rom stock 4.4!?)
I root my tablet with odin and teamwin 2.8.0.0 (PDA field + tar file)
the root flash should success.
I restart in recovery and install custom rom CM12 + Gapp
the tablet restart and stay to CM12 loading during all the night.
I come back into recevery mode
I try to wipe cache/dalvik => unable to mount cache/dalvik
I try to wipe cache => unable to mount cache
I try to wipe system => unable to mount system
I install Kies on my computer and try to restore the official rom with it.
The download of the rom is ok and Kies try to send the rom to the table a transfer is running during 15min (progress bar into computer windows, but no progress bar into tablet).
After that a second transfer progress bar into computer stay to 0% during 1 hour. I unplug my tablet.
Now I have got a table without recovery. I have access to download mode.
But I cannot transfer stock rom (PDA field) with Odin.
Thx for your help.
Staying at your disposal
I can flash recovery mod (TeamWin) with Odin.
But I cannot send Kies tar file by Odin.
I am downloading old stock rom (*tar) to transfer by Odin 3.09
How can I convert a CM12 zip file in tar file to tranfer it (I haven't SD card)
You could use a USB OTG cable (micro USB plug on one end and a socket like the USB ones on a computer on the other), one of these:
http://m.ebay.com.au/itm/301542874539?nav=SEARCH
And use it to plug a USB stick with the zip file on it into your tablet. You would have to mount it in twrp before flashing the zip.
They are a very useful cable to have, if your screen breaks and touch doesn't work you can use it to plug a mouse into the android device and use that for things like backing up your data before repair or disposal.
Hi I fixed the problem,
Re-Flash TWRP (many time) en try to install an unofficial KitKat version (information were write into NAND) but this version bootloop.
I wipe cache, cache/dalvik, Data, System (some eror were display in red, mount error)
I install the unofficial CM12, then the Android invite was displayed :victory:
I setup the unoficial CM12.
Reboot in recovery mode to install gapp
@Nameless One, thx for your help. In TWRP, the mount doesn't work in my case !? (It works with my Galaxy S4)
Appology for my poor English
Hi Dribounet
Dribounet said:
Hi I fixed the problem,
Re-Flash TWRP (many time) en try to install an unofficial KitKat version (information were write into NAND) but this version bootloop.
I wipe cache, cache/dalvik, Data, System (some eror were display in red, mount error)
I install the unofficial CM12, then the Android invite was displayed :victory:
I setup the unoficial CM12.
Reboot in recovery mode to install gapp
@Nameless One, thx for your help. In TWRP, the mount doesn't work in my case !? (It works with my Galaxy S4)
Appology for my poor English
Click to expand...
Click to collapse
Hi Dribounet
I have similar issue with my SM-P600.
I have tried 10 official roms , official and custom recoveries also , without success. I am absolutely sure that I am not following correctly the procedure using Odin and its version or combination of this plus wrong official ROM and so on.
Also have tried to use PIT file because I think something goes wrong with the partitions but not success again,
Would you advice with your steps you follow in order to succeed installing custom recovery.
Can I install only the recovery without ROM and how I can run in it ( button combinations)
For now I am just able to run in Download mode and with one official ROM to run the process to the middle- then goes in error with Odin and when reboot the device it shows message "Firmware upgrade encountered an issue ..... "
Thanks in advance for all answers
p600 bricked
kafencetu said:
Hi Dribounet
I have similar issue with my SM-P600.
I have tried 10 official roms , official and custom recoveries also , without success. I am absolutely sure that I am not following correctly the procedure using Odin and its version or combination of this plus wrong official ROM and so on.
Also have tried to use PIT file because I think something goes wrong with the partitions but not success again,
Would you advice with your steps you follow in order to succeed installing custom recovery.
Can I install only the recovery without ROM and how I can run in it ( button combinations)
For now I am just able to run in Download mode and with one official ROM to run the process to the middle- then goes in error with Odin and when reboot the device it shows message "Firmware upgrade encountered an issue ..... "
Thanks in advance for all answers
Click to expand...
Click to collapse
I have the same problem! There is download mode only - NO recovery, NO rom! ((
I have tried to flash original rom from sammobile via Odin. No results.
Who can help???
uno mas said:
I have the same problem! ((
Who can help???
Click to expand...
Click to collapse
Still do not have the answer and solution.I have start thinking that this is hardware issue. But when i have got it intially from the service it was able to boot in a stock bootloader and I have done something wrong with Odin and since then not able event to go in stock or custom bootloader.
Sent from my LG-D855 using Tapatalk
kafencetu said:
Still do not have the answer and solution.I have start thinking that this is hardware issue. But when i have got it intially from the service it was able to boot in a stock bootloader and I have done something wrong with Odin and since then not able event to go in stock or custom bootloader.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
In other words - should I go to the service?
uno mas said:
In other words - should I go to the service?
Click to expand...
Click to collapse
If you did not do something with it that makes the warranty not valid it is advisable to send it to service, unfortunatelly I have rooted it and they refused to accept it
Sent from my LG-D855 using Tapatalk
kafencetu said:
If you did not do something with it that makes the warranty not valid it is advisable to send it to service, unfortunatelly I have rooted it and they refused to accept it
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
SOLVED!!!
http://forum.xda-developers.com/showthread.php?t=2719750
http://forum.xda-developers.com/galaxy-note-10-2014/help/pit-stock-pit-file-thread-t2989266
uno mas said:
I have rooted also. No the warranty. But it doesn't matter if you have a bricked. ((
The Odin starts writing but no finish.
Click to expand...
Click to collapse
yep this is the case , Odin start process of writing and then suddenly - error - in the middle of the procedure.
I have tried to install only custom bootloader - pass successfully ,but then I am not able to go in bootloader mode ( I am trying with Volume down + Power , do not know is that correct - do you have an idea? )
uno mas said:
SOLVED!!!
http://forum.xda-developers.com/showthread.php?t=2719750
http://forum.xda-developers.com/galaxy-note-10-2014/help/pit-stock-pit-file-thread-t2989266
Click to expand...
Click to collapse
Hello uno mas
would you advice what tools you have used and also what order you have follow.
First update PIT and then installed the ROM or other
Thanks in advance for time and efforts!
hello everybody can someone please help me , trying a lot to install Cm12.1 unsucessfully , had a bootloop but hopefully reflashed my tab via odin with a stock rom , tripped the knox count , now rooted and with twrp 2.8.7.0 but still can t install cm12.1 on it i have this message, any idea of how to flash it , thanks a lot
www.hostingpics.net/viewer.php?id=757975IMG20160109123314.jpg
Is that a Tab S 8.4?
ashyx said:
Is that a Tab S 8.4?
Click to expand...
Click to collapse
yes samsung galaxy tab s 8.4 sm t700
You probably need to reset to factory default before flashing. Format(not wipe) system and data. Ensure you have that twrp backup before formatting anything.
Are you trying to install on TWRP. Go to wipe. Then advanced wipe. select System, Data, Cache, Dalvik cache and optionally Internal storage. After that try to flash zip file again. Let us know how you went
hi there guys thanks for everybody s help i ll do it right now and i ll tell you right after if it s ok
ahem bad news guys , stuck on samsung galaxy tab s logo.....
next news , reflashed my tab with odin : with pit and pda file , but still the same problem in recovery mode when he tell me he cant format a certain sbfs partition..... so any solution ???
rhazes said:
next news , reflashed my tab with odin : with pit and pda file , but still the same problem in recovery mode when he tell me he cant format a certain sbfs partition..... so any solution ???
Click to expand...
Click to collapse
Ignore that message it's normal in stock recovery.
ashyx said:
Ignore that message it's normal in stock recovery.
Click to expand...
Click to collapse
but still can t flash my tab with cm12.1
rhazes said:
but still can t flash my tab with cm12.1
Click to expand...
Click to collapse
Did you format the partitions (not wipe) to ext4 like I suggested with TWRP?
ashyx said:
Did you format the partitions (not wipe) to ext4 like I suggested with TWRP?
Click to expand...
Click to collapse
first time i had a boot loop was when i formatted then before leaving custom recovery it asked me if i want to root tab , then i accepted and it frooze , but after , have used odin with pit file and stock rom even checked repartition so it should be same as formatting no?
rhazes said:
first time i had a boot loop was when i formatted then before leaving custom recovery it asked me if i want to root tab , then i accepted and it frooze , but after , have used odin with pit file and stock rom even checked repartition so it should be same as formatting no?
Click to expand...
Click to collapse
Don't let twrp root your device.
After repartition are you able to mount all partitions in twrp?
Did the firmware flash OK?