[ROM][10.0][UNOFFICIAL][UNIFIED] LineageOS 17.1 [STABLE] [NFC] - Redmi Note 8 ROMs, Kernels, Recoveries, & Other De

[ROM][10.0][UNOFFICIAL][UNIFIED] LineageOS 17.1 [STABLE] [NFC] - Redmi Note 8 ROMs, Kernels, Recoveries, & Other De

Changelogs
2020/09/17
Switch back to QTI Bluetooth library, might finally fixed the bluetooth.
2020/09/16 - Fixed
Updated with September security pathes.
Upstream updates and fixes.
Properly fixed the bluetooth problems and re-uploaded.
Based kernel on QuicksilveR and updated to 4.14.198.
Added Nintendo Switch Joy-con & Pro Controller support.
Sync Device/Vendor sources from trinket-dev org. (MIUI 12 Q Beta blobs)
Added Xiaomi Parts [Mi Sound, Display color calibrations supported].
Updated QTI Power HAL.
Support newer Redmi Note 8T model (19.39.0).
MIUI Camera updated.
2020/08/08
Updated to Android 10.0.0_r41 with August security patches.
Updated Kernel to 4.14.193.
Seems to fixed the rebooting issues.
Massively updated blobs from MIUI Q.
Switched to MIUI Camera port for 48MP/Aux lens.
Fixed FMRadio.
Bluetooth is broken in this build, investigating.
2020/06/08 - V2 Hotfix - V2
Revert QTI telephony changes, fixes sim card detection.
Updated to Android 10.0.0_r37 with June security patches.
Upstream updates and fixes.
Updated Kernel to 4.14.183 with latest CAF and Genom kernel changes.
Bring back Ultra-wide and macro camera, use compatible GCAM or ANXCamera to use it.
Updated audio ACDB from willow V11.0.9.0.PCXEUXM.
Updated adreno/vulkan blobs to LA.UM.8.11.r1-03300-NICOBAR.0.
Updated thermal configs.
Updated LMKD configs.
2020/05/29
Updated Kernel to 4.14.182 and switched to Genom kernel.
[*] Freezes / Heating problem seems gone now.
Added back missing Trust USB HAL patches.
Fixed screen recording/sharing green tint issues.
Minor device tree updates.
2020/05/15
Switched source base to Mrinal Ghosh( @mg712702 ) 's trees.
The build is unified for both ginkgo and willow now.
Updated to Android 10.0.0_r35 with May security patches.
Upstream updates and fixes.
Updated Kernel to 4.14.180 stable branch.
Updated Graphics/WFD/Perf/GPS/CNE/DPM and more blobs from Mi A3 Q release.
Fixed camera for some users. (Macro, Ultra-wide lens still broken)
Bring back Wifi-display.
SELinux is now Enforcing.
2020/04/12
Updated to Android 10.0.0_r33 with April security patches.
Upstream updates and fixes.
Fixed graphical jank issues.
2020/03/08
Updated to Android 10.0.0_r31 with March security patches.
Upstream updates and fixes.
2020/02/03
Upstream updates and fixes.
Fixed front and back main camera for almost everyone. (Aux camera still not working)
Properly fixed fingerprint service on all decrypted/encrypted device.
Added basic LiveDisplay options.
Attempt to fix charging LED for ginkgo (please test it)
2020/01/12
Updated to Android 10.0.0_r23 with January security patches.
Upstream updates and fixes.
Bring back battery icon customizations. (By LOS team)
Fixed a random reboot issue related to Huaxing touch panel which caused by touching fingerprint sensor while screen off.
Force enable VoLTE for all supported carrier.
Updated Display HALs.
Make Fingerprint service also available for decrypted users.
2020/01/05
Initial release for Redmi Note 8 (ginkgo) with LED lights support.
2020/01/04
Initial release of LineageOS 17.1 with Android 10.0.0_r18 and December security patches for willow.
Almost everything works including NFC, no UI lags.

Screenshots
here!

Reserved
Mine!

can i flash this on ginkgo too?

desmoshadow said:
can i flash this on ginkgo too?
Click to expand...
Click to collapse
I guess Dev is only interested in willow,
---------- Post added at 08:01 PM ---------- Previous post was at 07:58 PM ----------
Good Job Dev, I truly appreciate your work, but pls will you build for ginkgo too? We need it pls

Can I try this wonder in the redmi note 8t ..? Congratulations delighted and very happy with your work. Thanks

Paco10 said:
Can I try this wonder in the redmi note 8t ..? Congratulations delighted and very happy with your work. Thanks
Click to expand...
Click to collapse
Yeah, it meant for 8T

Thx finally Android 10 for willow.

Can someone explain me which is willow and ginkgo?
I have a note 8 (not T nor Pro) and installed pixel xperience (9.0) (ginkgo) and it works fine, but if i flash xiaomi.eu, it say's that mine is willow.

jorge121valdes said:
Can someone explain me which is willow and ginkgo?
I have a note 8 (not T nor Pro) and installed pixel xperience (9.0) (ginkgo) and it works fine, but if i flash xiaomi.eu, it say's that mine is willow.
Click to expand...
Click to collapse
willow is note 8t (with nfc)

GApps for Android 10 link is not working...
???

https://sourceforge.net/projects/op...ps-arm64-10.0-nano-20191209-BETA.zip/download
For now, all is ok

oldman360 said:
GApps for Android 10 link is not working...
???
Click to expand...
Click to collapse
android 10 gapps are in beta, you can find them on sourceforge (can't post link, don't have 10 posts...)

oldman360 said:
GApps for Android 10 link is not working...
???
Click to expand...
Click to collapse
https://sourceforge.net/projects/opengapps/files/arm64/beta/

Battery indicator controls not working (show battery percentage)

rhyme4u12 said:
I guess Dev is only interested in willow,
---------- Post added at 08:01 PM ---------- Previous post was at 07:58 PM ----------
Good Job Dev, I truly appreciate your work, but pls will you build for ginkgo too? We need it pls
Click to expand...
Click to collapse
You can install it on ginkgo too.

ReversedPosix said:
You can install it on ginkgo too.
Click to expand...
Click to collapse
Have you installed it on ginkgo with everything working?

Great to see ROM development for willow too!!!
Are you planning to enable enforcing SElinux?

ReversedPosix said:
You can install it on ginkgo too.
Click to expand...
Click to collapse
would be cool if thread starter could add description in the first post if it works with ginkgo too

Related

[ROM][7.1.2]Android Open Source Project - CAF[OMS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOSP-CAF 7.1.2 for Xiaomi Mi5
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's CodeAurora Forums ?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
Working
Everything exept broken stuff
Broken
Video Recording does not save (use Camu to fix that)
How to install ?
Place ROM, Firmware and Gapps in your SD Card/Internal Memory
Reboot into recovery mode
Wipe cache/dalvikcache/system/data
Flash Firmware
Flash ROM
Flash Gapps (additional)
Reboot
Download Links
AOSP-CAF 7.1.2
Recommended Firmware (Developer 7.7.6+)
Recommended GApps
XDA:DevDB Information
AOSP-CAF, ROM for the Xiaomi Mi 5
Contributors
33bca @bgcngm
Source Code: https://github.com/AOSP-CAF
Kernel Source Code: https://github.com/CyanogenMod/andro...xiaomi_msm8996
Version Information
Status: Beta
ROM OS Version: 7.x Nougat
Based On: AOSP/CAF
Created 2017-02-16
Last Updated 2017-07-17

Features except the AOSP ones:
OMS
Button Configuration Panel
LineageOS Button Settings for Mi5 (Tap2Home/Swap Buttons/Fingerprint Wakeup)

Report a bug:
Changelog:
16.02.2017
- Initial Release
21.02.2017
- Update source to newest CAF sources (CAF tag LA.UM.5.5.r1-02500-8x96.0)
- Kernel upstream with CM
- Device upstream with CM (Many more under the hood changes)
13.03.2017
- Update source to newest CAF sources (CAF tag LA.UM.5.5.r1-03600-8x96.0
- Update Graphic Blobs (CAF tag LA.UM.5.5.r1-02500-8x96.0)
- Support rootless substratum
- Add aptX codec support
- Kernel upstream with LineageOS
- Device upstream with LineageOS (Many more under the hood changes)
28.03.2017
- Update source to newest CAF sources (CAF tag LA.UM.5.7.r1-08000-8x98.0)
- Bightness adjustments
- HAL3 enabled from now on
- GPS upstream with CAF
- Dexpreopt Kernel (faster boot)
- Audio configs from MIUI 7.3.2 China dev
- Fix recordings longer than 30 seconds
- Update build fingerprint (Stable, it will pass safetynet with that)
- pocketmode: Listen only when fp wake-up is enabled (saves battery if you dont use fp-wakeup)
- Kernel upstream with LineageOS
- Device upstream with LineageOS (Many more under the hood changes)
11.04.2017
- Update source to newest CAF sources (CAF tag LA.UM.5.7.r1-08400-8x98.0)
- configpanel: give the option to disable pocetmode (can save battery if you disable it)
- Kernel upstream with LineageOS
- Device upstream with LineageOS (Many more under the hood changes)
18.04.2017
- Updated to new 7.4.14 Blobs
- Update source to newest CAF sources (CAF tag LA.UM.5.7.r1-08900-8x98.0)
- Kernel upstream with LineageOS
- Device upstream with LineageOS (Many more under the hood changes)
17.07.2017
- Updated to new 7.7.6 Blobs
- Update source to newest CAF sources (CAF tag LA.UM.5.8.r1-02200-8x98.0)
- New OSS ConsumerIR HAL
- Kernel upstream with LineageOS
- Device upstream with LineageOS (Many more under the hood changes)

Thanks Fabi ? , I hope that you fix the video rec soon cause I know that you are working hard on it.
Regards.

Is the difference significant from for example CM/LOS? I remember, that LOS is using AOSP with some CAF patches now.

reas0n said:
Is the difference significant from for example CM/LOS? I remember, that LOS is using AOSP with some CAF patches now.
Click to expand...
Click to collapse
This now is near pure CAF, you will feel the difference

Great! Is it working on F2FS?

wyzga said:
Great! Is it working on F2FS?
Click to expand...
Click to collapse
Yes, of course

Thanks new custom rom for mi5.. can i use footej to save video rec?

zilan said:
Thanks new custom rom for mi5.. can i use footej to save video rec?
Click to expand...
Click to collapse
i have not tested footej, but you can try.
I can just confirm that video rec works with camu, for photos all apps are working.

33bca said:
This now is near pure CAF, you will feel the difference
Click to expand...
Click to collapse
Yeah, just flashed it and it's really nice, that's what I needed after coming from Nexus 6P forums
Is there a possibility to enable Night Mode?
EDIT: Also in Poweramp Alpha Hi-Res mode doesn't work like in LOS

Niiice. Its this or LoS for me. I'm a sucker for AOSP based roms since its pure nexus experience. I'll give this a boot tomorrow. Thanks OP!
Edit: Didn't saw the title. CAF. Now I'm more excited. ?

I'm coming in. Will report back in a few hours.

i will replace rr with this, lets check what this baby can do 8) Thanks dev
---------- Post added at 05:36 PM ---------- Previous post was at 05:30 PM ----------
Oh, and question. Is there any way to check what firmware I already have? I havent installed official miui nougat, instead of that I installed just CM14 ( i had cm13 earlier) when it was available, and phone works on many roms without problems. I still dont know if should i flash it or not.. .

think you'll miss some RR features i mean this is pure aosp more or less and without xposed i don't think i could use it ;( hope rovo89 will do his magic soon!

This rom absolutely flies. Love it. Only thing missing is that already known video recording, led blinking while fast charging (right now it blinks continuously while charging) and double tap to sleep on statusbar. Otherwise, I'm staying here.

Anyone knows how to root?

wyzga said:
Anyone knows how to root?
Click to expand...
Click to collapse
Flash latest SU on twrp

Philb90 said:
Flash latest SU on twrp
Click to expand...
Click to collapse
Did that, but got bootloop. I'am on F2FS, so probably that's the problem...?
Wysłane z mojego MI 5 przy użyciu Tapatalka

wyzga said:
Did that, but got bootloop. I'am on F2FS, so probably that's the problem...?
Wysłane z mojego MI 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
From what I've heard, SUPER SU is kind of wanky on F2FS and its the reason why LOS made their own SU so that if the user decides to go f2fs, the user won't have any problems.

[9.0_r37][X00TD] LineageOs 16.0 [UNOFFICIAL] Optimized

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0.x (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's special about my build:
Sometimes I pick a few patches from the Lineage Gerrit before they are approved and merged into our trees.
The device trees will also be improved overtime with various improvements from mixed sources (for example better presets, different HAL solutions and so on).
Added Touchscreen gestures (Something similar like Zenmotions )
Added statusbar battery styles
Added Expanded volume pannel
Added SIM Enable/Disable switch
What's working:
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Video Playback
Audio (Record and Playback)
Fingerprint
Sensors
Flash
Notification LED
Enforced
What's not working:
You Tell me
Instructions:
Before installing ROM Zip make sure your running latest pie stable firmware 16.2017.1903.050-20190401
If not then download & flash latest pie stable firmware first from here PIE_20190401_firmware.zip ( Thanks to @Subinsmani )
Installation:
Download & Place ROM & Gapps in your internal storage/virtual SD
Boot into TWRP
Wipe System, Data, Dalvik, Cache.
Flash the latest Firmware if you were not in it yet.
Flash the ROM and GApps.
Reboot and Enjoy.
Downloads:
ROM - AFH Folder
Gapps - https://opengapps.org/ (ARM64 9.0 Nano Recommended)
Reporting bugs:
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
If it is a random reboot, grab /proc/last_kmsg (do not bother getting a logcat unless you can get it just before the reboot, a logcat after a reboot is useless).
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log (only applies to SELinux enforcing builds).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
XDA : DevDB Information
LineageOS 16.0, ROM for the Asus ZenFone Max Pro M1 X00T
Credits:
This is a very important note: I am NOT the original developer of the device trees I'm using. Despite I do my best to fix bugs, improve security, stabilty and the performance of the ROM, it's not thanks to me that this is up and running now.
Please, be sure to thank and donate to the developers behind the device trees.
@krasCGQ For his KUD trees
@SagarMakhar & @Shivam Kumar Jha for Initial LineageOs Bringup
@Subinsmani For help building during initial builds & every knowledge he shared with me
@kylothow for XDA thread template idea.
Contributors:
@rahul9999 , @krasCGQ , @Subinsmani
Source Code: https://github.com/LineageOS
ROM OS Version: 9.0.x Pie
ROM Kernel: Linux 4.4.x
Based On: LineageOS
Version Information
Status: Stable

Changelog :-
All new builds will be appeared here in my AFH Folder - LineageOs 16.0 X00T
New build is up..
16.05.2019
May Security patch
LineageOs upstream changes.
Synced with Latest Kud Changes
Kernel related derp fixed
Added channel bonding for 2.4GHz WiFi
Added Use EIS v2.0
More vendor blobs updated and some were removed unused blobs(will increase performance)
DRM Issue fixed
Sound increased compared to last build (Without any mod) thanks to @Subinsmani
Built in Gcam removed.
Some people might be face cracking sound on speaker, decrease 2 sound levels for now as solution.
Built in Gcam has been removed, as some people are facing issues with that. Use any Gcam as per your choice now.
29.04.2019
Enforcing Selinux (Thanks to @SagarMakhar & @Subinsmani )
Updated blobs from pie stable firmware (Thanks to @Subinsmani )
Widevine L1 Fixes (Thanks to @SagarMakhar )
Reintroduce touchescreen gestures (Thanks to @SagarMakhar )
Built in Gcam 6.2 (Thanks to @Subinsmani )
Added Always-On-Display Support
Notes :
Clean Flash is heavily recommended to avoid any major issues, as I'm using different device tree.
If you're using OpenGapps & found FC while trying to use Gcam then use this old open_gapps-arm64-9.0-nano-20190413.zip
If you're getting FC / Green tint while using Gcam front camera then change base model for front cam & try again.
15.04.2019
Using KUD Trees ( Thanks to @krasCGQ )
Merged April Security Patch
LineageOs upstream changes
Touchscreen gestures (Something similar like Zenmotions )
Updated build fingerprint from stable Pie update
Added SIM Enable/Disable switch
Fixed Whatsapp video call issues
Added statusbar battery styles
Added Expanded volume pannel
Kernel upstreamed to 4.4.178
Merged latest CAF tag LA.UM.7.2.r1-06700-sdm660.0 in Kernel

Reserved 2

LineageOs is here

What is the difference between this and sagar?

Most Awaited ROM !!
Finally.

Awesome..

Do I need to flash latest pie official firmware first?

DinIslamJoy said:
Do I need to flash latest pie official firmware first?
Click to expand...
Click to collapse
yes, as stated in OP above.

Just installed on ZB602KL (Indonesian Version) so far working really well! Thank you!

speed.fastest said:
Just installed on ZB602KL (Indonesian Version) so far working really well! Thank you!
Click to expand...
Click to collapse
Even the in-call sound and speaker working well?

efilah said:
Even the in-call sound and speaker working well?
Click to expand...
Click to collapse
Yes both works well i just tested it.

speed.fastest said:
Just installed on ZB602KL (Indonesian Version) so far working really well! Thank you!
Click to expand...
Click to collapse
From Pie / Oreo ?

gusbalaa said:
From Pie / Oreo ?
Click to expand...
Click to collapse
From Oreo 338 Firmware with Lineage 15.1 Official, i just do format system, data, cache, dalvik, and then flash firmware on this thread, flash this rom, flash gapps and done, magisk works too

speed.fastest said:
From Oreo 338 Firmware with Lineage 15.1 Official, i just do format system, data, cache, dalvik, and then flash firmware on this thread, flash this rom, flash gapps and done, magisk works too
Click to expand...
Click to collapse
Any bugs you find ?

gusbalaa said:
Any bugs you find ?
Click to expand...
Click to collapse
Not yet, im using it daily, battery seems good too.

speed.fastest said:
Not yet, im using it daily, battery seems good too.
Click to expand...
Click to collapse
How it is compared to other heavily loaded custom roms?
Is OTG working? How's the sound output via headphones and speakers?
And any other you want to mention?
Thanks.

ankshious said:
How it is compared to other heavily loaded custom roms?
Is OTG working? How's the sound output via headphones and speakers?
And any other you want to mention?
Thanks.
Click to expand...
Click to collapse
I personally dont like bloated rom so im not try it, but compared to Official Oreo this seems to have same stability level. Sound with speaker is good, with headphone is acceptable but not great. Sadly i dont have any OTG to test. And google camera (GCam_6.2.024_N7P_test1.1) working greats! Photo sample from google camera & Battery performance attached below.

There's no update since last week, as there's no source or device changes..
Next update will be probably after any source / device side changes.

This Rom is enforcing or permissive?

[ROM][10.0][UNOFFICIAL] LineageOS 17.1 [sumire] [STABLE]

Changelogs
2020/11/03
Add missing SELinux policy rules for camera, fixes some issues.
2020/10/30
Sync camera wrapper codes with my LOS18 sources.
Sync camera blobs hack with my LOS18 sources.
2020/10/26
Upstream updates and fixes.
Fixed Camera / Camcorder (Proper fix, not using prebuilt patches), stock Snap camera might not be good, try Footej or Open Camera from Play store.
2020/09/19 [ TEST BUILD ]
Fixed RIL/Telephony issues.
DOWNLOAD
2020/09/14
### Camera is still broken ###
Updated with September security patches.
Upstream updates and fixes.
Disable PowerEfficient WQ to reduce wake-up events on kernel, Optimized for battery life.
Lower minimal CPU frequency for better power consumption and heating issues.
Revert 3.18 Kernel Binder/LMK changes for better memory management.
Fixed Offline-charging due to SELinux enforcing denials.
Fixed Encryption/Decryption due to SELinux denials.
Switch back to older Light HAL for better Notification LED compatibilities.
Allow apps to access OpenCL library.
Added WireGuard support in kernel.
2020/08/08
### Camera is still broken ###
Updated to Android 10.0.0_r41 with August security patches.
Upstream updates and fixes.
Fixed Torch light. (Camera preview and capture still broken)
SELinux is now enforcing.
Optimized UI performances.
2020/07/22
### Camera is still broken ###
Updated to Android 10.0.0_r40 with July security patches.
Upstream updates and fixes.
Finally fixed memory draining issues, thanks to @TALUAtXDA .
Kernel optimizations.
Support more models for flashing: E6603, E6683
2020/06/19
### Camera is still broken, and memory draining very fast ###
Updated to Android 10.0.0_r37 with June security patches.
Upstream updates and fixes.
Fixed Deep sleep problems with CPU task stats patches, now device goes into sleep more effective.
Updated Kernel from 3.10.84 to 3.10.108 with a lot of patches.
Updated LMK and Binder drivers from 3.18 Kernel.
Imported Power Efficient Workqueue with netfilter/ipa driver patches.
Added BFQ I/O Scheduler.
Updated Perf/Thermal stack from Nexus 6P - OPM6.171019.030.
Tweaked volume steps.
Fixed manually network operator search.
Support Encryption. (But there is no compatible TWRP for Z5 to support decryption, use it at your own risk)
Added back LiveDisplay HAL (for color calibration and picture adjustment).
2020/04/12
Updated to Android 10.0.0_r33 with April security patches.
Upstream updates and fixes.
Fixed SMS sending and dialing problems.
Kernel patches for memory management, improved performances.
Enabled ZRAM, improved performances.
Fixed audio routing issues on previous builds.
2020/03/08
Updated to Android 10.0.0_r31 with March security patches.
Upstream updates and fixes.
2020/02/28
Upstream updates and fixes.
Switched to Legacy WiFi Service - fixes Mac address.
Add Doze service, improves and deep sleep seems better now.
Fixed random reboots caused by some network behavior.
2020/02/11 - Initial release
Android 10.0.0_r27 with February security patches.
With Graphic / Vulkan drivers from Angler OPM3.171019.019.
With Proper RIL Signal strengths.
With FM Radio support.
With working GPS.
With ExFAT SDcard support.
With massive recent kernel patches.

Screenshots
here

Reserved
Mine!

Thanks for this! I'll attempt to bring this up for Z5P.

Good job! Thanks! Downloading....

Only thing that doesnt work for me is the camera and texting over SMS but other than that perfect rom

Is there any hope for the camera?

dim.on said:
Is there any hope for the camera?
Click to expand...
Click to collapse
simbanono said:
Only thing that doesnt work for me is the camera and texting over SMS but other than that perfect rom
Click to expand...
Click to collapse
Still working on it, no idea for now.

tarkzim said:
Still working on it, no idea for now.
Click to expand...
Click to collapse
The SMS-sending issue is first reported here.
I've never found a solution...

Berni-0815 said:
The SMS-sending issue is first reported here.
I've never found a solution...
Click to expand...
Click to collapse
I see, will try to figure it out.

wow, i thought the developers have already forgotten the Z5. I keep my fingers crossed to fix the errors. When wifi is fixed I will gladly test this rom. Good job

bladesss said:
wow, i thought the developers have already forgotten the Z5. I keep my fingers crossed to fix the errors. When wifi is fixed I will gladly test this rom. Good job
Click to expand...
Click to collapse
WiFi is all fine, it's just screen cast is broken.

Awesome. Does it not work on E6633/E6683 or has it just not been tested?

HaruKaze98 said:
Awesome. Does it not work on E6633/E6683 or has it just not been tested?
Click to expand...
Click to collapse
I have a single variant of Z5, so i can't give you the answer for now.
But it "Should be" working with your dual sim variant, grab me logcats if it's not.

Holy cow , I opened up XDA to see check magisk and ended up with THIS POST. Good luck , man , you doing a god's job XD

I got a z5 last week and I'm glad to hear good news. I got a lot of help when I was using Zenfone 5z. Thank you for your work

tarkzim said:
I have a single variant of Z5, so i can't give you the answer for now.
But it "Should be" working with your dual sim variant, grab me logcats if it's not.
Click to expand...
Click to collapse
I just tried flashing it. the device entered a bootloop and I didn't know how to get a logcat during it.

Good job! Keep it up :good:

HaruKaze98 said:
I just tried flashing it. the device entered a bootloop and I didn't know how to get a logcat during it.
Click to expand...
Click to collapse
backup working os via TWRP
flash this rom
reboot and wait a while or until kernel panic
press power+volume_up until vibration
hold power button
press power_down immediately after vibration
release all buttons
in TWRP go to advanced/terminal
copy the content (if any) of /sys/fs/pstore to /sdcard
restore working os
copy the files from /sdcard (see the step above) to somewhere and analyse them

[ROM][12L][UNOFFICIAL] LineageOS 19.1 [sumire] [STABLE]

Changelogs
2022/08/07
Updated with August security patches.
Upstream updates and fixes.
2022/08/02
Fixed Camera/Camcorder including preview, but unfortunately no 23MP supports.
2022/07/30
Updated to Android 12.1.0_r11 with July security patches.
Upstream updates and fixes.
Partially fixed Camera/Torch light (Read descriptions below)
For now, Camera HAL loaded correctly but you can't see preview in camera apps, especially stock Camera app, Install Open Camera will let you "Capture" the photos with "23MP" resolutions magically. But I have no idea how to fix viewfinder/camera preview at the moment, at least some progress has been made huh?
Bring back more LiveDisplay features, without breaking CPU deepsleep.
2022/06/14
Updated to Android 12.1.0_r7 with June security patches.
Upstream updates and fixes.
2022/04/07
Updated to Android 12.1.0_r4 with April security patches.
Updated stock app icons.
Upstream updates and fixes.
2022/03/22
Fixed Fingerprint enrollment screen crashing on previous build.
Fixed vibration strengths.
Fixed Vulkan support.
Fixed Fingerprint location hint animation while enrolling.
2022/03/20
Updated to Android 12L with March security patches.
Updated to LineageOS 19.1.
Upstream updates and fixes.
Clean flash recommended.
2022/03/12
Updated to Android 12.0.0_r29 with February security patches.
Upstream updates and fixes.
Fixed Fingerprint sensor enrollment.
Bring back FM Radio.
2022/01/21
Initial release of LineageOS 19.0 for Z5.

Screenshots

I am not just impressed, I am SHOCKED that this thing even possible. Good job, keep it up.

Thank you for your work! It is nice to See that a device from 2015 gets Android 12!

I'm going to wait for this to become stable.
I'm very much exited about this!

@tarkzim Given that you're working on this new major release, will you find some time to fix the Netguard behaviour that blocks always all traffic?
It seems like it's a LineageOs API issue described here and someone posted a solution in the same post.
Thanks for keeping this device alive!

I'm impatiently waiting for this to get stable

New build released
Updated to Android 12.0.0_r29 with February security patches.
Upstream updates and fixes.
Fixed Fingerprint sensor enrollment.
Bring back FM Radio.

Just WOW.
I am amazed that you managed to achieve this.
When the camera and SELinux issues are fixed I will download it for sure. Your previous version based on Android 11 works really well!

NiklausMikaelson said:
Just WOW.
I am amazed that you managed to achieve this.
When the camera and SELinux issues are fixed I will download it for sure. Your previous version based on Android 11 works really well!
Click to expand...
Click to collapse
It works but, it melts my phone, don't you have same problem ?

diimdeep said:
It works but, it melts my phone, don't you have same problem ?
Click to expand...
Click to collapse
Nope, aside from battery drain which is quite expected considering I didn't change it for 5 years, everything else seems quite normal.

Issue I had with most recent build of Lineage 18 was that voice messages were not being sent on WhatsApp. They were empty no matter what. I had Audio permission On for whatsapp as well. But still. Hopefully will be fixed in Lineage 19

Issue screen when scrolling

Lineage OS 19.1 is out can you make it for z5 ????
tarkzim said:
New build released
Updated to Android 12.0.0_r29 with February security patches.
Upstream updates and fixes.
Fixed Fingerprint sensor enrollment.
Bring back FM Radio.
Click to expand...
Click to collapse

New build released
Updated to Android 12L with March security patches.
Updated to LineageOS 19.1.
Upstream updates and fixes.
Clean flash recommended.

Bug: Settings Keeps Crashing when enrolling fingerprint (Setup Wizard - nick Gapps installed)

_harley said:
Bug: Settings Keeps Crashing when enrolling fingerprint (Setup Wizard - nick Gapps installed)
Click to expand...
Click to collapse
Try a clean flash.

tarkzim said:
Try a clean flash.
Click to expand...
Click to collapse
[TESTING]
Lineage 19.1 (12L) with Magisk and Nick GApps - Fingerprint Enrollment / Settings Crashes
Lineage 19.1 (12L) with Magisk - Fingerprint Enrollment / Settings Crashes
Lineage 19.1 (12L) Clean Install - Fingerprint Enrollment / Settings Crashes
[Device]
Sony Xperia Z5 - E6683 - Sumire DSDS
Kernel: Stock / The one included in this Rom

New build released
Fixed Fingerprint enrollment screen crashing on previous build.
Fixed vibration strengths.
Fixed Vulkan support.
Fixed Fingerprint location hint animation while enrolling.

[ROM][12L][GINKGO] LineageOS 19.1 [UNOFFICIAL] for Redmi Note 8/8T

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS, an open-source Android distribution, is available for several devices,
with more being continuously added thanks to the biggest, yet ever growing, Android open-source community.
Join us and breathe new life in your device, be it old or new.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
*
*/
It's an Unofficial build on top LineageOS source
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Video Calling
Bluetooth
Fingerprint
FMRadio
Lights
Sound / vibration
NFC
What's not working :
CTS not True
SELinux status
Enforcing
Downloads
lineage-19.1-unofficial
XDA:devDB Information
LineageOS, ROM for Xiaomi Redmi Note 8/8T
LineageOS version: LineageOS 19.1
AOSP version: android-12.1.0_r22
Security patch level: 5th September 2022
Last update: 14 Sept, 2022
Build Author/Device Maintainer: cbendot
Device Source: ginkgo
Kernel Source: 4.14.292
Base System Source: LineageOS
Miui Camera and Xiaomi Parts Included
Credits:
Thanks To All Developers whose the commits i picked

TESTED WITH
1. Redmi Note 8 4/64 model
2. Recovery twrp-3.6.2_12.-1-ginkgo.img by Erwin Abs
3. Global Firmware V12.5.2.0.RCOMIXM
4. Latest NikGapps core
CHANGE LOGS
==== 14th Sept, 2022 ====
1. Synced with latest LineageOS source code
2. updated to sec. patch level 2022.09.05
3. Enable THERMAL_EMULATION mode (kernel)
4. Enable IOSCHED_DEADLINE (kernel)
5. overall improve here and there
==== 10th Sept, 2022 ====
1. Initial Unofficial build
2. Sync with last LineageOS code
3. August Security Patch
4. Upstreamed Kernel v4.14.292
5. Add three-fingers-swipe to screenshot
6. Appinfo: Add time spent in app from Wellbeing
7. VolumePanel: Show percentage
8. EasterEgg: Implement Android 12L Easter Egg
9. use gestural navigation as default
10. MiuiCamera and XiaomiParts included

Wow Does ROM Have "Game Space" Feature?

<X> said:
Wow Does ROM Have "Game Space" Feature?
Click to expand...
Click to collapse
nope, if possible next build add. .
this build include Miui Camera & Xiaomi Part

Thank you!!!
Tested with:
Redmi note 8t willow
Latest FW and latest TWRP
FlameGapps basic 12.1 20220612, latest 20220811 don't boot!!
Clean install.
For me, all is working great, fast and smooth. Battery drain is normal at the moment.
The only thing I'm missing is to change the theme/color.
Keep on running!!!

Furosemid said:
Thank you!!!
Tested with:
Redmi note 8t willow
Latest FW and latest TWRP
FlameGapps basic 12.1 20220612, latest 20220811 don't boot!!
Clean install.
For me, all is working great, fast and smooth. Battery drain is normal at the moment.
The only thing I'm missing is to change the theme/color.
Keep on running!!!
Click to expand...
Click to collapse
thanks before for test, don't boot issues which FlameGapps or FW or last TWRP?

With the latest FlameGapps! It ends wirh a bootloop.
With the older version no problem.

LineageOS 20.0 will be?

We still doesn´t have stable an official 19.1 and you want to have Linuageos 20.0? Do you want to try some developing here?

BeriCud said:
We still doesn´t have stable an official 19.1 and you want to have Linuageos 20.0? Do you want to try some developing here?
Click to expand...
Click to collapse
I'm wondering if there will be support for future versions of lineageos

Xotwot said:
I'm wondering if there will be support for future versions of lineageos
Click to expand...
Click to collapse
yes off course, recently i build arrow-13.0 for other device, before LineageOS 20.0 i build 19.1 which September security path

cbendot said:
yes off course, recently i build arrow-13.0 for other device, before LineageOS 20.0 i build 19.1 which September security path
Click to expand...
Click to collapse
Are you planning an official LineageOS 19 release?

BeriCud said:
Are you planning an official LineageOS 19 release?
Click to expand...
Click to collapse
i'am not sure

UPDATE UPDATE UPDATE
=> Change logs (14th September, 2022)
1. Synced with latest LineageOS source code
2. updated to sec. patch level 2022.09.05
3. Enable THERMAL_EMULATION mode (kernel)
4. Enable IOSCHED_DEADLINE (kernel)
5. overall improve here and there
=> Thanks
Thanks To All Developers whose the commits i picked
Download

MiuiCamera crashes while using portrait mode. How can I switch to a simple but stable Camera?

Hi! Any chances to get themed icons?

alsjdoi said:
MiuiCamera crashes while using portrait mode. How can I switch to a simple but stable Camera?
Click to expand...
Click to collapse
u can use gcam parrot043, simple and gud for quality

Redmiredmiredmi said:
Hi! Any chances to get themed icons?
Click to expand...
Click to collapse
not yet :v

cbendot said:
u can use gcam parrot043, simple and gud for quality
Click to expand...
Click to collapse
I already had that Gcam, but one of my Apps has a unique request that it use the default camera, which crashed with MiuiCamera. So, using Gcam is not the solution. And I find out that other people using MiuiCamera has the same problem. I just want you to know about this bug.
Good work.

Where can I download the LineageOS 19.1 file? The link lineage-19.1-unofficial at the beginning is "dead". It shows...
404. That’s an error.
The requested URL /0:/ginkgo/lineage-19.1-20220914-UNOFFICIAL-ginkgo.zip was not found on this server. That’s all we know.

Develop Bugs

welcome