Related
I noticed after rooting that I went from firmware U to U1.
I guess my question is can I use normal Odin to flash SM-G955U1 firmware and have my phone unlocked so I can use my goole Fi sim card?
Kaldrick said:
I noticed after rooting that I went from firmware U to U1.
I guess my question is can I use normal Odin to flash SM-G955U1 firmware and have my phone unlocked so I can use my goole Fi sim card?
Click to expand...
Click to collapse
Flashing the firmware alone will not unlock the phone. You must have the carrier it is attached to unlock it first.
Milly7 said:
Flashing the firmware alone will not unlock the phone. You must have the carrier it is attached to unlock it first.
Click to expand...
Click to collapse
Hi, could i do the reverse? i have a g955u1 Us version, can install the ATT firmware to it? will it work?
nlesir said:
Hi, could i do the reverse? i have a g955u1 Us version, can install the ATT firmware to it? will it work?
Click to expand...
Click to collapse
When you buy a Galaxy S8 Plus at a store in the usa like Best buy or other, you will get the model SM-G955U1 which is unlocked and it works will att and tmobile sim cards, i have that model and works fine with Tmobile.
S8+ # labels
-G955U locked to USA carriers version
-G955U1 is the Unlocked version
Kaldrick said:
I noticed after rooting that I went from firmware U to U1.
I guess my question is can I use normal Odin to flash SM-G955U1 firmware and have my phone unlocked so I can use my goole Fi sim card?
Click to expand...
Click to collapse
You can use ODIN to flash U1 firmware for a bloatfree experience, but that WILL NOT carrier unlock your device. It has to be unlocked by the carrier. Either by calling them direct or paying for an unlock service. But if your phone is paid off, your carrier will unlock it for free.
nlesir said:
Hi, could i do the reverse? i have a g955u1 Us version, can install the ATT firmware to it? will it work?
Click to expand...
Click to collapse
Of course. Search the forums and carrier switching thread.
iSeven77 said:
When you buy a Galaxy S8 Plus at a store in the usa like Best buy or other, you will get the model SM-G955U1 which is unlocked and it works will att and tmobile sim cards, i have that model and works fine with Tmobile.
Click to expand...
Click to collapse
That's a half truth. You CAN purchase the U1 model at Best Buy, but only if you specifically ask for it. They also sell the carrier versions for ATT, Verizon, and I believe Sprint.
The U1 can also be purchased directly from Samsung, as well as the carrier versions.
Yes the U1 works with ALL major US carriers. I.e. Verizon, Sprint, ATT, T-Mobile, US Cellular, and all their MVNOs.
You can try my post i would like to help you
Mr. Orange 645 said:
You can use ODIN to flash U1 firmware for a bloatfree experience, but that WILL NOT carrier unlock your device. It has to be unlocked by the carrier. Either by calling them direct or paying for an unlock service. But if your phone is paid off, your carrier will unlock it for free.
Of course. Search the forums and carrier switching thread.
That's a half truth. You CAN purchase the U1 model at Best Buy, but only if you specifically ask for it. They also sell the carrier versions for ATT, Verizon, and I believe Sprint.
The U1 can also be purchased directly from Samsung, as well as the carrier versions.
Yes the U1 works with ALL major US carriers. I.e. Verizon, Sprint, ATT, T-Mobile, US Cellular, and all their MVNOs.
Click to expand...
Click to collapse
i keep on getting this error in odin <ID:0/004> abl.elf
leonardojt said:
i keep on getting this error in odin <ID:0/004> abl.elf
Click to expand...
Click to collapse
use latest Odin 3.13.1
TQ
ikrishaary said:
use latest Odin 3.13.1
TQ
Click to expand...
Click to collapse
Thanks, it worked
I have the U1 and flashed U firmware, and was trying to go back to U1 and Odin is being a pita about it.
Any pointers on how to get my U1 phone that thinks it's a U now, to get back to being a U1? Get a binary error when I try. I have both firmware. U oddly says it's an XAS file (phone still shows being XAA, but U1 is an XAA file, both from sammob, and both are latest updates, Dec. 1st.).
h2o2h said:
I have the U1 and flashed U firmware, and was trying to go back to U1 and Odin is being a pita about it.
Any pointers on how to get my U1 phone that thinks it's a U now, to get back to being a U1? Get a binary error when I try. I have both firmware. U oddly says it's an XAS file (phone still shows being XAA, but U1 is an XAA file, both from sammob, and both are latest updates, Dec. 1st.).
Click to expand...
Click to collapse
If your getting a binary error either you are 1 of 3 things. Using older firmware than on the device. You need to flash the combination file then subsequent firmware. Like u1 combo u. Or u combo u1. Or wrong odin. 3.13b
Sir pls help for me my samsung galaxy s8 plus model no is (SM-G955U) can i flashed firmware like (SM-G955F) pls help me.
WasifMeraj said:
Sir pls help for me my samsung galaxy s8 plus model no is (SM-G955U) can i flashed firmware like (SM-G955F) pls help me.
Click to expand...
Click to collapse
No you cannot.
TheMadScientist said:
No you cannot.
Click to expand...
Click to collapse
Thank you sir for replying.
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
kdecoteau1 said:
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
Click to expand...
Click to collapse
I would like to know where to get the firmware and with what do you flash it with? Is there a instructions thread or link.
It's been over 5 years since I have tinkered with a Samsung device.
Hi there. You'll need to have your Note 8 Bootloader version on level 2, meaning 2BQK2, 2BQJA or anything with 2 before the last 4 digits.
1) tmobile SIM card in device
2) Odin v3.12.7 make sure extract
3) 2BQK2 firmware extract all files
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC.
Odin and firmware https://androidfilehost.com/?fid=673791459329067572 2BQK2
https://androidfilehost.com/?fid=962157660013069130 2BQL5
https://drive.google.com/open?id=1bRz4RQzmloSgsuYmyLu92cktT_f8hIYp
Unlock firmware
1) any carrier SIM card
2) Odin v3.12.5 Prince Comsey or modified Odin, make sure extract
3) 2BQK1 firmware, extract all files.
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC
Odin and firmware https://androidfilehost.com/?fid=745849072291691586 2BQK1
https://androidfilehost.com/?fid=817906626617955896 2BQL2
https://drive.google.com/open?id=1Lw79Q5npvMRdME33-ioqy692ClZ36n4U
First instructions is for if you want stock US CARRIER BLOATWARE FIRMWARE, second instructions is if you want SAMSUNG STOCK FIRMWARE. Follow steps and everything will be fine, happy flashing.
So wait, I have a Verizon Note 8 (currently using MetroPCS perfectly), but I wanted a stock Samsung ROM (without the Verizon crap on it), I can just flash the second set of files instead and done with it?
Yes
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
So much misinformation in this thread.
I don't even know where to start:
The OP was asking why his T-Monile SIM wouldn't work. It doesnt matter which firmware you're on, if the Note 8 is unlocked (the Verizon Note 8 IS unlocked), and it has a clean IMEI, and your SIM is already activated, then it will get 4G LTE. I know. I have a Verizon Note 8, and use it on Tmobile. I used it for over 24 hours with my T-Mo SIM but running thr Verizon firmware with no issues. Only reason I flashed T-Mobile firmware was to rid myself of Verizon bloat and to get wifi calling.
As far as bootloader, that has no effect on the SIM card working. The OP would need a v2 bootloader firmware if his current firmwarealso had the v2 bootload. It probably does, so thats a moot point, but the implication was the v2 bootloader was the only one that would make his SIM work.
I hope the OP got it all figured out.
mmdpkaaa said:
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Click to expand...
Click to collapse
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
unitop4 said:
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
Click to expand...
Click to collapse
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
BlueFox721 said:
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
Click to expand...
Click to collapse
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
Another user had SIM issues and flashed back to factory (theirs was unlocked) then changed carriers and SIM worked again...sometimes a clean flash can work...
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
kdecoteau1 said:
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
Click to expand...
Click to collapse
How did you get ATT N8 to work on VZW? I flashed my Tmo to VZW and i could never get speeds above 1mpbs. Even with unlocked firmware it did not get anywhere with VZW. I heard that its because the IMEI is not in VZWs database.
Hi there. My AT&T Note 8 works great on Verizon network, it's running the latest N950U1 Firmware 2BQL2, everything works great. It will work good on T-Mobile too, lately tmobile network giving trouble, sometimes less than 1 mbps on download. Since June 2017 I been having trouble with tmobile network in my area and around, so I switch to Verizon, couldn't bother the crappie service. My location I get 215 mbps on my note 8, IPhone 8 plus 147mbps download. I prefer Tmobile but it's not working good in area anymore.
[/COLOR]
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will performing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Nevermind, I fixed it. I had to perform the carrier switch and flash Tmo's firmware. Running perfectly!
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Omg exacly whats happening to me? So what steps have you guys followed? Should I switch to T-mobile, or to factory unlocked?
I have Verizon phone, unlocked, and I use T-mobile sim card.
I would appreciate the help
Sent from my SM-N950U using Tapatalk
Verizion note8 with tmobile sim card
This is what happened when I changed carriers from the original verizon note8, on verizon network, with verizon sim and the most recent verizon pie update, to a carriers sim, that is tmobile service. And what happens, I didn't even think was possible... I put the new carriers sim in, truconnect, booted and let the phone register the new sim and network. Checked for update.... the was one, let the phone download and update. And you know how Verizon's boot logo is... it wasn't anymore. Booted the tmobile boot logo and sounds, strange. I'm not super noob and the little bit of knowledge and experience that I do have with roms and updates across carriers usually require physically flashing the rom. Correct me if I'm mistaking. Continuing.... optimizing apps....., huh?! The update flashed the tmobile software, without effecting any personally installed apps. Though the update did remove all the verzion software/bloatware, without permissions, and installed tmobile apps. 2 that are meant for user usage. They are tmobiles device unlock and the tmobile app. Which I might add, do not function, I surmise, because in not on the actual main tmobile network, but a scabbed on. I have never seen or experienced anything of the short. Please tell me if this is normal.? I was a bit upset. I did not give any carrier the permission to delete or install any app on my phone. But maybe things have changed since I dabbled. And If they have, maybe this might help the people that have been using Odin to get tmobile version rom while originally being a verzion phone. I dont think it's normal. Please tell me if this has happened to you.
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
toronado13 said:
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
Click to expand...
Click to collapse
Did you have to flash to the U1 software first?
I do think that is what I ended up doing... tried to go directly first and it kept failing. Got fed up and decided to just try and put the bone stock rom on it, and that went on really easily.... so after using it like that a few days I tried to drop the ATT rom on it and it worked without issue.
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
Yes, but you need to go to the u1 firmware 1st then to the other carrier firmware. Also make sure you avoid the newer firmwares with the new bootloader, as the unlocked model and certain carrier models don't have the new bootloader.
*Detection* said:
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
Click to expand...
Click to collapse
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
elliwigy said:
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
Click to expand...
Click to collapse
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
*Detection* said:
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
Click to expand...
Click to collapse
I tried downloading vzw firmware G960USQS3ARI6 to my unlocked sprint s9 and still not vzw flashed. want to do this so can have voice over LTE. Any other steps im missing? flash went through but still sprint
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA. ?
HAPPY FLASHING!
nickosarus2008 said:
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA.
HAPPY FLASHING!
Click to expand...
Click to collapse
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Curtis2018 said:
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Click to expand...
Click to collapse
Well first off, you have the unlocked phone. I don't. My G960U is originally from Sprint, so I'm not sure about carrier flashing regarding the G960U1. I thought it was supposed to provision itself after you put the sim in, and the associated carrier apps will download since it's the unlocked model...but I may be wrong...
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
I know so many people have already answered your question from some saying No to others saying Yes but you need to Install U1 first and Bla Bla Bla.
I want to give you one specific answer: With S9 you can any Carriers firmware you wish or even Unlocked phone's firmware. You will never have any issue. And you don't ever need to flash U1 or something else before changing carrier firmware you can Flash from ATT S9 firmware to VZW S9 firmware without any issue. You can also flash from U to U1 which is from Carrier specific to Unbranded/Unlocked but only hiccup is original Odin will give you SHA-256 error, which is normal because you are flashing U1 firm to U device or vice versa. This error can easily be resolved by used Patched odin that disabled SHA-256 check. And trust me you will never have any issue.
You will never want to do this but I have gone as far as mix-matching U and U1 firmware together as well. Like flashing AP, BL and CP of U device but flashing CSC of U1 device. and it still works.
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
---------- Post added at 03:08 AM ---------- Previous post was at 02:57 AM ----------
ret4425 said:
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
Click to expand...
Click to collapse
well, I tried to load the Sprint image from the VZW, no dice. It said it passed, but upon reboot loaded up the old Big Red (even with the Sprint SIM in it).
Anyone have any ideas? This is driving me insane....
I got Note 10+ 256gb unlocked version from Samsung. Planning on using it on Tmobile. Do I need to do anything specific to make it more compatible with Tmobile. I've currently unlocked s10e on Tmobile and overall network coverage seems bit subpar compared to Galaxy S8 that I purchased from Tmobile.
So I'm just curious if I need to do anything for Note 10+ ince I get it, to make it more network friendly.
Sent from my SM-G970U1 using Tapatalk
Download the tmobile firmware from sam mobile and odin it to your unlocked.
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
stu5797 said:
I googled it but didn't have luck. Any chance there is a link to the T-Mobile firmware?
Click to expand...
Click to collapse
It's not up on Sammobile yet...
But it is on samfrew
https://samfrew.com/download/Galaxy__Note10+__256GB__/c3pb/TMB/N975USQU1ASGO/N975UOYN1ASGO/
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
I just flashed my Note 10+ with TMB fimware and it all went fine. here is the link from Sammobile https://www.sammobile.com/samsung/galaxy-note-10-plus/firmware/SM-N975U/
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
It doesn't really matter. The storage size doesn't affect the firmware. It's all the same.
Flashing the carrier firmware will factory reset your device, so I wouldn't waste time setting it up first. Just put your SIM in and let it provision for T-Mobile. It happens automatically so there's nothing you have to do. Then flash the firmware with ODIN.
Just research and make sure you know what you're doing before flashing. ODIN is fairly fool proof, but it's still best to know what you're doing first.
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
stu5797 said:
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
I thought you can flash without messing with your data.
Click to expand...
Click to collapse
Technically you can flash without messing data but will be difficult to identify the reasons if you encounter any issues after that. So its better to flash it now itself when its freshly out of the box
I was going to update the Unlocked firmware via OTA software update. Once I receive the update I will then flash the Tmobile firmware via Odin
marctronixx said:
What about for the 512 version unlocked? Can use same as 256 unlocked?
And is it recommended to flash the firmware (T-Mobile in my case too) right out of the box or do you have to put your old sim in from your previous phone first, then setup your gmail acct and let the sim reach the T-Mobile network?
Never had unlocked phones so this will be a first, hence the questions...
Click to expand...
Click to collapse
Just received my unlocked Note10+ 512GB an hour ago and, as was the case with my unlocked Note9, it works great out of the box with T-Mobile and Mint (a discount reseller). No custom flashes needed unless you want the TMO bloatware. I would leave it as-is and just download the respective carrier apps individually. Love this BEAST so far! :good:
I bought the note 10+ and i'm on the tmobile network. The only issue I'm having is VOLTE. To my knowledge VOLTE should work. Can anyone confirm this?
Has anyone had success with installing carrier firmware on an unlocked phone from a different carrier? I am able to flash XAA (unlocked) software to the phone but haven't had success with verizon software. After installing the unlocked software, I lose the original T-mobile screen when powering on along with all the bloatware. However, if I try to flash verizon firmware onto it, it reverts back to T-mobile screen, bloatware etc.
I've tried the following:
TMB-->VZW (fail, stays TMB)
TMB-->XAA (success, even changes phone info to SM-n975u1)
TMB-->XAA-->VZW (fail, reverts to TMB)
VZW software used was for SM-n975u as that was what people had success with when I looked through forums.
I'm going to leave it with unlocked firmware for now but would appreciate any tips with flashing verizon firmware. I'd like to get all the verizon features if possible.
Are you trying to use you T-Mobile SIM card with it as Verizon? If so, newer firmwares will prohibit that due to the SIM detect function.
Thanks for the response. No, I'm using my Verizon sim card. The call, text, web actually work fine. I was just hoping to get functions like Verizon Voicemail, call filter etc.
Did you boot your phone with the VZW SIM after flashing XAA? You have to do this before flashing the VZW firmware. That's worked for me when I went from ATT --> XAA + boot with VZW SIM --> VZW
Sent from my SM-N975U using Tapatalk
No I havent tried that yet! Will attempt it when I get home from work and update the post. Thanks guys!
I flashed xaa and put in my vzw sim, restarted the phone and then tried to flash vzw. Unfortunately that did not work. Still comes up Tmobile.
I'm trying to get my unlocked att Note10+ to Verizon. I hope flashing will get this to work
As of now, I think just using the unlocked xaa firmware is your best option. Download the xaa firmware using samfirm or sammobile and flash it with Odin. It seems to be working fine for me currently. I cant get all Verizon functions like Verizon Voicemail but I haven't noticed many other issues.
ferzmedina said:
Did you boot your phone with the VZW SIM after flashing XAA? You have to do this before flashing the VZW firmware. That's worked for me when I went from ATT --> XAA + boot with VZW SIM --> VZW
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I tried this and it's working fully. WiFi calling. Visual voicemail and Verizon boot animation and Verizon apps
Att note 10 to XAA to verizon
Whatisveal said:
As of now, I think just using the unlocked xaa firmware is your best option. Download the xaa firmware using samfirm or sammobile and flash it with Odin. It seems to be working fine for me currently. I cant get all Verizon functions like Verizon Voicemail but I haven't noticed many other issues.
Click to expand...
Click to collapse
Are you flashing the Verizon Userdata as well in Odin?
do anyone have stock firmware for SM-N975U trying to remove the frp on it it a verizon version dont care about erasing the data on it
Out of curiousity why did you want to got to verizon? I have found a software issue with the n976V firmware that locks out verizon MVNO sims. Seems to bypass the sim data per my carrier.
Was looking to go the other way.