My Pda 2k device i tryed to upgrade it from 2003 SE to 2k5 after pressing update the device restarted gived me a gray screen and typed on it seril and at the buttom v2.02 now i cant open the device each time i reset or heard rest this is the only screen appears to me i cant even connect to activsync please i need your help what to do to get my device back, this error message i recived (usb device not recognized aslo active sync didnt recognize it)
i need to add a point the device is not working on the USP connection as it have a problem only serial port to connect with the pc
i'm so new here please help me
not to worry.. you can perform a hard reset of your 2k3 version "power+reset" to get you back to at least a working device.. I have been through this and have had this happen to me as well.. try entering bootloader again "power+record+reset" and dock it fairly quickly and it should change to USB on the screen and PC recognize it... also for anyone reading this.. I would highly recommend plugging your cradle into a 5v power supply as I can only imagine most of the bricked BAs are probably due to a computer freezing and/or the PC shutting down power to the USB port only for a fraction of a second and hosing the flash up.
THx Man i will try i hop this will work :lol:
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Try this it shld work
hdubli said:
This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :
-Put yr device in bootloader Mode
-Disable USB in Active Sync
-Now connect woth USB cable and open mtty utility
-Select the "WESUSB... " port
-You shall see a blank white screen..press Enter to get "USB>"
-Then type ( as BUzz has informed) set 14 0
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
-Then I ran the ROM Upgrade directly(After enbabling the USB)
-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
-I got them back to normal..
I hope this helps to all my friends...Pls feel free..pls do not trouble our Buzz..he might be busy in inventing something more to our devices
Click to expand...
Click to collapse
Guru Meditation said:
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Just noticed your user name, I was a big Amiga fan a few years back, still fire up Amiga forever occasionally on my PC when I feel the need.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Click to expand...
Click to collapse
Try it with a different USB cable or in a different USB port (don't go through a hub and if you've been using a laptop then try it on a desktop PC since some laptops have hubs built into them). If that doesn't work then you're out of luck as your Universal isn't detecting that you've connected to your PC and its time to send it in for repair.
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
i am stuck on the same problem and wondering the forum for almost 3 days now with no luck.... please help my device is in boot loader mood but not turning the serial to USB ......... please HELP.......
solution
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Please follow the steps:
1. Plug in ur usb cable in bootloader mode while it is showing 'serial' and version 'x.xx'.
2. Soft reset by pressing Backlight+power+reset pin WHILE KEEPING THE USB CABLE CONNECTED
3. your phone will now reboot into 'usb' mode. Don't remove the usb cable yet.
4. Remove the Memory card while keeping the usb cable still connected and VOILA,your pc starts recognising your phone as Microsoft usb sync.
5. Do whatever you want to do now (upgrade)
Hope it solves the problem now.
Press thanks if it does.
Something else to try
Having had a few issues with my G3 Uni, I've been through my fare share of Uni bootloader issues. When I find that I can't get the 'serial' to go to 'USB', I normally find it's because I haven't taken the memory card or the SIM card out (usually the memory card).
Make sure your memory card is out, then try to enter the bootloader and see if this cures it. If it does, then use mtty and the command 'set 14 0'
This tells it to reboot on reset. if you were to use 'set 14 1' it would go back to the bootloader on reset.
my Htc hd2 t-mobile won't recognize usb on boot-loader mode
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
kaleb2954 said:
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
Click to expand...
Click to collapse
you have the wrong forum friends! This Htc Universal section
to update Android on HTC HD2, you can use the Clock Work Mod Recovery !! for more details should refer to this thread http://forum.xda-developers.com/showthread.php?t=1021837
I-MATE JASJAR hung
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
bechir2013 said:
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
the first point...
A lot easier than to root this device
Hi all,
I've read a lot of forums on what seems to be a pretty common issue, however, with each attempt at a fix the answer is still elusive.
the problem i'm experiencing is that when I connect my (unrooted) Galaxy S2 to my pc (running windows 7) the USB device is not recognised. The phone says that it is connected (USB Connect MTP-Connected), however, when I try to access my phone via Kies or explorer it is not there. I also get an error message saying that the 'device is not recognised'.
I've taken the following actions:
- Reinstalled a fresh version of Kies
- Reinstalled samsung drivers (once prompted by Kies)
- Tried at least 3 USB cables including the original Samsung cable
- As per one of the blogs i read, i switched to USB debugging on and then off as there was no effect
- I've tried turning on bluetooth, then connecting the USB device (also a 'fix' i've seen on another forum)
- I've restarted my phone a number of times
- Connected via different USB ports
- Restarted my PC
Could anyone please help me.
Thanks,
Rob
Get a new one
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Uninstall all drivers, and Kies.
Restart the computer.
No go to device Manager under Human Interface Device/Universal Serial Bus controllers and see if there is that little yellow triangle there. If so click and uninstall any device with the aforementioned icon.
Now reset again.
Go to the Samsung website and download the drivers for the phone. Restart the computer yet again. Almost done.
Now attach your phone and it should be identified.
Go ahead and install Samsung Kies and you should be ok. I hope all this works.
I had a very similar issue with my last SII. One day it just simply would not be recognized by many computers using various USB cords including the OEM one. Windows always said something along the lines of " USB device not recognized, a device connected to this computer has malfunctioned." The computer would pick it up bit was listed as an unknown device in the device manager. Turns out it was a hardware failure so I had so get a warranty replacement
Sent from my Galaxy Nexus using Tapatalk 2
r0b0_0 said:
Hi all,
I've read a lot of forums on what seems to be a pretty common issue, however, with each attempt at a fix the answer is still elusive.
the problem i'm experiencing is that when I connect my (unrooted) Galaxy S2 to my pc (running windows 7) the USB device is not recognised. The phone says that it is connected (USB Connect MTP-Connected), however, when I try to access my phone via Kies or explorer it is not there. I also get an error message saying that the 'device is not recognised'.
I've taken the following actions:
- Reinstalled a fresh version of Kies
- Reinstalled samsung drivers (once prompted by Kies)
- Tried at least 3 USB cables including the original Samsung cable
- As per one of the blogs i read, i switched to USB debugging on and then off as there was no effect
- I've tried turning on bluetooth, then connecting the USB device (also a 'fix' i've seen on another forum)
- I've restarted my phone a number of times
- Connected via different USB ports
- Restarted my PC
Could anyone please help me.
Thanks,
Rob
Click to expand...
Click to collapse
That happened to me one day....
All I did was reboot my phone and tried a new cable and it worked
Sent from my SGH-T989 using xda premium
Not very helpful answers... you may have sorted this out already but...
One solution found on other threads that worked for me was this:
uninstall Kies
key in the dialer *#7284#
it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
Only change the USB setting.
Select PDA, if it already selected, select MODEM, don't hit "back", try reconnect, wait for windows to respond.
Unplug, then select PDA, try reconnect.
usb device not recognised
pardus said:
Not very helpful answers... you may have sorted this out already but...
One solution found on other threads that worked for me was this:
uninstall Kies
key in the dialer *#7284#
it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
Only change the USB setting.
Select PDA, if it already selected, select MODEM, don't hit "back", try reconnect, wait for windows to respond.
Unplug, then select PDA, try reconnect.
Click to expand...
Click to collapse
Dear all, I have same problem. I have official ICS 4.0.3 on mz Smasung S2 adn when I connect phone on mz computer i receiving information "USB Device not recognised" I tried all mentioned stuff:
reinstaling driver
cleaning micro stick on phone
hard reset
*#7284#
wipe clear data and cache
but i dont have connection Please help if someone have solution for this. Thanks in advance
srdjan_trisic said:
Dear all, I have same problem. I have official ICS 4.0.3 on mz Smasung S2 adn when I connect phone on mz computer i receiving information "USB Device not recognised" I tried all mentioned stuff:
reinstaling driver
cleaning micro stick on phone
hard reset
*#7284#
wipe clear data and cache
but i dont have connection Please help if someone have solution for this. Thanks in advance
Click to expand...
Click to collapse
Try changing your usb cable. If that still doesnt help, try it on another pc. If still not, then send it to samsung for repair.
Sent from my SGH-T989 using xda app-developers app
PC not recognizing Android USB connectio
romny19 said:
That happened to me one day....
All I did was reboot my phone and tried a new cable and it worked
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Romny 19, you are dead on. I had thesame problem, read your posting and good to go.
Anyone trying this must remember to power down phone completely (Reboot),
Hi,I have a problem with my Galaxy W USB.The phone usb stops responding and i am not be able to CHARGE it even connect it to my pc.I notice that when i reboot via recovery mode and i check the error log,Some files in /sys/class/android_usb are completely missing.Is there any other way that i can fix this problem?Please advice and help.
Thank You
Hello,
My LG G3 has had a problem for a while now, and it is out of warranty so I cant get a replacement or refund and I would like to get it working. There is currently no MAC Address on the phone, so it cannot connect to the internet or use bluetooth. I was planning on rooting the phone to try and fix this, but I was stopped when the phone wasn't noticed by my PC. It does not give me the option to change between MTP, PTP or just charge but instead shows that the phone is charging as if it were plugged into a wall. I cannot access the files as there is no phone showing up on my PC, but instead found that the phone was down as LGE Mobile USB Serial Port (COM5) under Ports in Device Manager.
I have tried factory resetting the phone but this does not work.
Any help would be appreciated. Thanks