I bought my son a Redmi Note 8 pro so he can listen his own music in his bedroom. So no more loud music in our living room . Hello sound of silence!!!
But... the 8 pro can't find his blue tooth speaker (UE Roll - fully updated). Same issue in our car (8 pro can't find car bluetooth and vice versa). On the other hand side: I can connect my phone (Samsung A50) with his device. A JBL speaker hasn't been a problem either.
Is there something I miss or I can do so his device can find (all?) bluetooth devices and connect with them? We will all be very thankful for a working solution.
Kind Regards
Sonja D
Related
Hi all,
So for the last 6 months I've been trying to use my brothers old pair of Trittons with the mic removed to listen to audio since they were the best headphones I could use at the time. They worked fine for about a month, until suddenly they weren't being recognised anymore. For the last 6 months I've been trying all the fixes I've seen on Google. Use compressed air to clean the port, wipe the cache partition etc. I no longer use the headphones so it wasn't a major issue until today, when my HyperX Cloud IIs arrived, and again the problem exists.
The phone won't even detect they are plugged in. It just plays music through the speakers. I've tested the headphones in my brothers iPhone as well as my PC and they 100% work, it is literally just a problem with the phone.
Other headphones I've used that work perfectly: Takstar HI2050s, Panasonic in-ear, Sony in-ear, Beyerdynamic Custom Ones. All of these have the common trait of not having a mic built in (3-pin 3.5mm connector as oppose to 4). It must be something in the software rejecting 4 pin and it's beyond annoying now.
Any help would be massively appreciated
Still not found a solution to this, if anyone knows a fix I'd be grateful
Please share your experience with your Redmi Note 8 Pro, how is the audio quality via the headphone jack or with the Bluetooth earphones?
Very Bad! i've continuous disconnections of various kind of earphones, BT 4.2 BT 5 even Redmi Airdots.
I use Zeus Air Bluetooth earbuds, and they work great with the Redmi Note 8 Pro! Very clear sound, no dropouts or disconnects. Can listen to HiFi music and it sounds very good. I can walk about 9 meters away and they're still connected, however when I pass 10 meters the connections breaks, as it's too far.
I ve tried 3 types of earphones and I've always the same problem. Which kind of rom do you have?
I've tried tronosmart bt speaker , Sony bt soundbar and some chinese bt headphones .... All od them worked perfectly - instant connection, stable and sound great.... I'm on latest official MIUI global ROM
I use the Sony SRS-XB21 Bluetooth speaker and works fine... Not connections issues
I think the bluetooth on this phone is excellent. Previously owned a xiaomi mi a2 lite and it was horrible. Could not listen to bluetooth through the ford mysync system in my car as it would hang, skip, sound horrible. This phone has none of those issues and is rock solid.
Another strange thing is that APTX doesn't work. Previously i owned a Note 7 e all worked fine till i changed to N8Pro.
I tested it with different Bluetooth headsets. TaoTronic, Sennheiser, Music Egg from China and my Radio in my Kia car.
All is working perfect. I have no issues with BT and i think its quit good.
I think that all depends of which rom you're using. I'm currently using European rom.
Anyone face the same problem?
I have a Boya BY-A100 External omni condenser microphone. I want to create an amateur home recording. for my bass trombone. The built-in microphone is too noisy and sensitive for me since I can hear "windy" sound when recording in my room, since there is no fan and silent enough. And there is vehicle sound which just passed in front of my house that can be heard clearly in my recording (rather than my trombone).
When I plug the external microphone, It's blinking in notification. And my recording has no sound at all. When I use the recorder app, my sound is just "skipping". It's annoying. I have another lavalier external microphone, but it has the same problem.. But the weird is when I plug my earphone (XIaomi in-ear HD) everything is working fine.
I have found the same problem in YouTube that the use of splitter may work. Then I bought a cheap U-shape splitter with the earphone and the external microphone plugged, then i plug it to my phone. But still, THERE IS NO SOUND AT ALL. It's annoying so much.
My Begonia (Indonesia) is Global MIUI 11 with Android 10 QGGMIXM.
having same problem mate
the same problem with the Boya By - MM1 external microphone
I have the same problem with the Boya By - MM1 external microphone. I read that the problem concerns all external microphones connected to the minijack socket on the Redmi Note 8 Pro phone. When a microphone is connected, the headphone diode flashes and the recorded sound is interrupted at the same frequency. I have reported a problem to Xiaomi technical support many times. I have been ignored. People around the world report a problem with microphone malfunction. This is a common problem. If anyone wants to use an external microphone, the Redmi Note 8 Pro is useless.
Is the problem due to a bug in the android system software or is it a technical defect?
Fix Found!!!!!
The trick is fairly simple.
I have a Boya MM1 mic and it was very very annoying that the mic icon kept blinking in note 8 pro.
Fix is simple.
1. Get a y split cable ... 3.5 mm male to two 3.5 mm female converter.
2. Connection 1 - input The cable with spirals (for DSLRs) to the smartphone to the mic end of the splitter.
3. Dummy connection- Input the smartphone end of the other cord into the other split cable end.
This fix works like magic, for more info
Type external mic not working in XIAOME now 8 pro in YouTube edwin bonus guy.
The video is Japanese but you'll get the gist.
Thank you
Man that was a pain but i luckily found a solution with some cables and adaptors i had at home:
I previously used IRIG pre to connect my condenser mic to my phone via 3.5 mm jack, so what i did from there is connect it to a cheap "ugreen" chinese mini soundcard/splitter (to the headphone/mic combo jack), i connected this to a USB to USB-C adaptor which i then connected to this stupid phone and TA DAM! it worked!
dudave said:
Man that was a pain but i luckily found a solution with some cables and adaptors i had at home:
I previously used IRIG pre to connect my condenser mic to my phone via 3.5 mm jack, so what i did from there is connect it to a cheap "ugreen" chinese mini soundcard/splitter (to the headphone/mic combo jack), i connected this to a USB to USB-C adaptor which i then connected to this stupid phone and TA DAM! it worked!
Click to expand...
Click to collapse
hi all
i have same problem by recording cable when i connect my yamaha keyboard to phone and headset icon blinking and record corrupt
i test it on note 7 and note 6 pro and not problem ...
i m in iran and i cant find trrs cable ...
is there software solution for this problem ? maybe change rom or change system files ...
Hi all,
I have the redmi note 8 on miui global 11.0.11 and I have an issue with the sound level when using bluetooth. I have a pair of bluetooth earphones (and also the same applies to car audio connection) that I'd been using with my old iphone 7 with no issues, I pair the same earphones to my ipad, no issues, I pair to my galaxy tab s6 no issues. When I connect it to my redmi note 8 the volume level is too low. Even when I max out the volume, I can hardly hear anything, especially outside during the day, even when I'm in a relatively quiet area (university campus with no students because of covid). I've tried bluetooth absolute volume limit in dev options (although that option does nothing on xiaomi phones ). This is driving me insane, I have tried with a couple of other headphones, still the same. In the car I can increase it to a level where it is loud enough, but the same level is then too high when I get a phone call. There is no option to sync bluetooth volume to media volume anywhere in the menus, I'm almost sure that is the cause of the problem but have no way of fixing. Can anyone offer any help. Cheers.
Hi!
I bought OnePlus Buds Pro and wanted to use them with my Pixel 6 Pro.
But they only support SBC and AAC?
What TWS do support more codecs connected to my Pixel 6 Pro?
Thank you!
I have the pixel buds series A and I like them a lot. Phone doesn't have to leave the pocket is the best part. Just "ok Google {command}"
It's an awesome feature in my opinion. And they sound good in my opinion. Gave up my Galaxy buds live
mine is LG TONE FP9, also same like yours only supporting SBC and AAC, but to be honest I'm satisfied with the features it come with such as whistling mode and plug and wireless.
used to have Pixel Buds 2, but left bud died after 3 months (yes I'm one of those unlucky owners)
I tried airpods pro, Freebuds pro and nothing.
Also i tried Sony MX4 buds but i was unlucky and it was mis-functional and i returned back.
I usually go back to airpods pro as the freebuds pro have issue with microphone which got muddy in the calls (other one can not hear me well) and this issue happen when i tried it with most devices not running huawei os, sometimes using it as speakers only.
Nothing ear 1 is good but not like airpods pro from the pressure sensor perspective (more comfortable) and also the transparency mode.
But i miss the battery info, control from application for it as it designed for ios.
If your main goal is talking on the phone I find the Pixel buds A just fine. However for listening to music I wouldn't settle for anything less than LDAC or APTX- HD codecs. I use Amazon Music which has 192/24 bit HD Ultra streams. The Sony WF-1000XM4 are supposed to be excellent. I have the H2 ProStereo earphones which support both codecs but they are discontinued. My ears prefer the LDAC codec.
Thank you so much guys!
I now ordered the new Xiaomi Buds 3T Pro as they claim to support the newest codecs
You can find a list of aptX/aptXHD earphone here...
Products | aptX
aptx.com