I can't boot into TWRP, any way to save the phone? - Redmi Note 8 Questions & Answers

The bootloader is unlocked and TWRP is installed on the phone. First boot into it went fine. There I made backups and wiped some /system, /data, internal storage and cache..
Now I get "The System has been destroyed. Press power button to shotdown."
I can get into fastboot, but not into TWRP. Tried power button up, tried "fastboot reboot recovery", tired "fastboot boot twrp.img". Nothing is working.
I have a full backup, but that won't do me much good if I can't get TWRP to run.
Is there any way to get into TWRP? Any help would be very much appreaciated.
Edit: Got it fixed. Basically just follow this if you ever have the same problem: http://c.mi.com/oc/miuidownload/detail?guide=2
Still don't get why TWRP wouldn't boot. Is recovery dependent on system? Who designs a phone like this? Oh well, only important thing is that it works again.

I would like to try this - I'm in the exact same position as you and having twrp back would be a lifesaver. However mine is the Chinese version and I'm not sure if flashing the global version is smart...
Edit: I'm seeing success, but it flashed in 1 second, which did nothing..

Just flash the stock firmware back by bronging your phone to fastboot mode and using Xiaomi's Flash Tool using a fastboot image for your phone.
Once unbricked you can set it up, reinstall twrp, then rinse and repeat if in cases it happens again when trying a custom ROM.
Check this linkfor a thorough unbricking guide.

Lyves said:
Just flash the stock firmware back by bronging your phone to fastboot mode and using Xiaomi's Flash Tool using a fastboot image for your phone.
Once unbricked you can set it up, reinstall twrp, then rinse and repeat if in cases it happens again when trying a custom ROM.
Check this linkfor a thorough unbricking guide.
Click to expand...
Click to collapse
Yes, have seen that guide but I'm getting flash xbl error on latest versions of the Xiaomi Flash Tool. So right now I'm actually stuck on Fastboot with no way to revive it.

nyvled said:
Yes, have seen that guide but I'm getting flash xbl error on latest versions of the Xiaomi Flash Tool. So right now I'm actually stuck on Fastboot with no way to revive it.
Click to expand...
Click to collapse
Use an older version. That worked for most.

Lyves said:
Use an older version. That worked for most.
Click to expand...
Click to collapse
I've tried a few at random. Most threw xbl error, one just flashed in a second and then nothing happened on the phone.
I'll give it another shot. Thanks for suggesting. :/

hy my friend if you have mi account you have to sighnout and then flash recovery and then go to recovery with vol up and power when you stil in the fastboot

Slowking said:
"The System has been destroyed. Press power button to shotdown."
Edit: Got it fixed....
Click to expand...
Click to collapse
no need to follow that tutorial
just flash vbmeta in fastboot using
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
and u r good to go

Have you tried orange fox recovery

Related

Cannot access flashboot / recovery - RESOLVED

Hi,
I've looked through a lot of threads but can't match the symptoms to mine (this could be a lack of knowledge on my part) so any help is appreciated.
I've previously flashed ARHD a number of times successfully including a new boot image. I flashed 9.2 today with CD Tools Suite and this was fine. I later decided that I wanted to re-flash without the CD Suite Tools and did this by going into recovery and re-flashing the ARHD zip.
The update ran successfully (per CWM) but I can't boot into it. All I get to is the HTC One white screen with a beats audio logo beneath it. I also can't get the phone to reboot into flashboot / recovery so that I can do anything with it (I've tried holding the power button and either vol up or down but this just reboots the phone and it goes back to the white screen again).
I'm sure there is a way out of this. Could anyone please help me?
Many thanks.
Hi, you wrote,
I later decided that I wanted to re-flash without the CD Suite Tools and did this by going into recovery and re-flashing the ARHD zip.
Click to expand...
Click to collapse
Did you use fastboot to flash the correct boot.img file first? It's my understanding that anytime you flash a rom you must flash via fastboot the correct boot.img file for that rom followed by erasing cache before entering recovery and flashing the rom.
Didn't someone say holding volume up & power can brick your phone?
Fastboot is volume down & power.
Press them at the exact same time, keep them held till fastboot loads up (even if it does another reboot)
Sent from my HTC One X using Tapatalk 2
phase sdeyou
Bit Banger said:
Hi, you wrote,
Did you use fastboot to flash the correct boot.img file first? It's my understanding that anytime you flash a rom you must flash via fastboot the correct boot.img file for that rom followed by erasing cache before entering recovery and flashing the rom.
Click to expand...
Click to collapse
They both use the same boot image so no need to re-flash that.
chrisjcks said:
keep them held till fastboot loads up (even if it does another reboot)
Click to expand...
Click to collapse
This was the key for me. It rebooted a couple of times then went into fastboot.
Thank you very much!

[Q] Cannot get out of boot animation nor flash by odin or fastboot - Help please

Hi everyone, I'm new here and I have a GNex on my hands.
While I received it to fix; I could not get it past a bootloop from the nexus 4.0.4 Boot.
Problem is I cannot seem to get past the boot animation screen nor upgrade it.
Tried flashing another bootloader via fastboot, and the bootloader does not change, stays in same version.
HW Version : 9
Bootloader version : PRIMEKK15
Baseband version : I9250XXKK6
I proceed doing a fastboot erase bootloader and trying another bootloader, rebooting into another bootloader but no luck
Tried also ODIN flash but no luck; stays into the same
Booting into recovery mode goes into stock recovery and tries to flash a file from /cache
By trying to flash CWM via fastboot flash recovery <cwm image> flashes image but no luck on booting into CWM.
Anbody can lend a hand please?
Thanks!
jhonnyx said:
Hi everyone, I'm new here and I have a GNex on my hands.
While I received it to fix; I could not get it past a bootloop from the nexus 4.0.4 Boot.
Problem is I cannot seem to get past the boot animation screen nor upgrade it.
Tried flashing another bootloader via fastboot, and the bootloader does not change, stays in same version.
HW Version : 9
Bootloader version : PRIMEKK15
Baseband version : I9250XXKK6
I proceed doing a fastboot erase bootloader and trying another bootloader, rebooting into another bootloader but no luck
Tried also ODIN flash but no luck; stays into the same
Booting into recovery mode goes into stock recovery and tries to flash a file from /cache
By trying to flash CWM via fastboot flash recovery <cwm image> flashes image but no luck on booting into CWM.
Anbody can lend a hand please?
Thanks!
Click to expand...
Click to collapse
You can flash a custom recovery like cwm or twrp. Then you can acces the custom recovery and adb push your ROM and gapps. Then you do the wipes and flash the ROM and gapps. If you dont understand anything you just have to tell me
Sent from my Galaxy Nexus using XDA Premium HD app
Thanks mrgnex. I've tried flashing TWRP, but the only thing it does is boot into stock recovery and tries to flash a file from /cache/, which file is: 5a81769b6d01.signed-yakju-IMM76I-from-ICL53F.5a81769b.zip; pretty weird. Issue is the same as this thread: http://forum.xda-developers.com/showthread.php?t=1909331&page=4
use: fastboot boot recovery.img
and "recovery.img" which recovery do you suggest? twrp or a CWM in particular?
doesnt matter. whichever.
jhonnyx said:
and "recovery.img" which recovery do you suggest? twrp or a CWM in particular?
Click to expand...
Click to collapse
I suggest the latest TWRP.
http://www.teamw.in/project/twrp2
Edit: Have you read this?
TheMysteriousOne said:
I suggest the latest TWRP.
http://www.teamw.in/project/twrp2
Edit: Have you read this?
Click to expand...
Click to collapse
While now I'm trying to install latest TWRP (already did and no luck) I'm downloading the pack from the "Have you read this?".
The things that I'm seeing right now that seem to be wrong are:
1 - everytime I reboot the phone, the "fastboot oem unlock" seems to be gone and phone re-locks again (weird!)
2 - every change I make to the filesystem, seems to be non-persistent I/E: push something via adb push and on reboot it's gone! :/
Any help would be greatly appreciated.
jhonnyx said:
While now I'm trying to install latest TWRP (already did and no luck) I'm downloading the pack from the "Have you read this?".
The things that I'm seeing right now that seem to be wrong are:
1 - everytime I reboot the phone, the "fastboot oem unlock" seems to be gone and phone re-locks again (weird!)
2 - every change I make to the filesystem, seems to be non-persistent I/E: push something via adb push and on reboot it's gone! :/
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Can you elaborate on why exactly you were not able to install TWRP?
TheMysteriousOne said:
Can you elaborate on why exactly you were not able to install TWRP?
Click to expand...
Click to collapse
Surely:
1 - Unlock via fastboot oem unlock
2 - fastboot erase recovery (exits with ok)
3 - fastboot flash recovery twrp_versiondoesnotmatter.img (exits with ok)
4 - reboot w/power+vlup+voldown and select reboot recovery
5 - stock recovery appears
an alternate method that i've tried:
1 - Unlock via fastboot oem unlock
2 - fastboot boot twrp_versiondoesnotmatter.img (exits with ok)
3 - TWRP boots and flashes a zipfile from /cache/ then reboots automatically
That's what happens. A mistery, huh?
Also I've tried OMAP Flash, and; the same issue happens over and over again
Have you tried doing a factory reset using the stock recovery?
TheMysteriousOne said:
Have you tried doing a factory reset using the stock recovery?
Click to expand...
Click to collapse
AFAIK, Yes
What happens once I start the stock recovery; as I've already stated; starts flashing a zip file located into /cache/ (5a81769b6d01.signed-yakju-IMM76I-from-ICL53F.5a81769b.zip); then bleh, starts the bootloop again.
I've tried the power+volup then selected wipe cache and wipe system and it's the same.
Did you try flash google's stock images (all of them) ?
Also try flashing TWRP in the boot (kennel) partition by :-
Code:
fastboot flash boot <path to twrp>.img
This will force the phone into Recovery (But you will have recovery bootloop , can be solved by flashing a kernel) .
when you boot into recovery install a Kernel and ROM . also you will lose the recovery after that .
You can flash the TWRP from the TWRP itself (to put it in the right partition) by (in the build in terminal) :-
Code:
dd if=/<path to twrp in SD>.img of=/dev/block/mmcblk0p8
Good Luck .
Sent from my Galaxy Nexus using xda app-developers app
$Parker said:
Did you try flash google's stock images (all of them) ?
Also try flashing TWRP in the boot (kennel) partition by :-
Code:
fastboot flash boot <path to twrp>.img
This will force the phone into Recovery (But you will have recovery bootloop , can be solved by flashing a kernel) .
when you boot into recovery install a Kernel and ROM . also you will lose the recovery after that .
You can flash the TWRP from the TWRP itself (to put it in the right partition) by (in the build in terminal) :-
Code:
dd if=/<path to twrp in SD>.img of=/dev/block/mmcblk0p8
Good Luck .
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
fastboot flash boot <path to twrp>.img does not boot the recovery . I mean; still boots the normal Kernel.
Actually I'm trying what TheMysteriousOne told me by downloading the stock Gnex zip (250Mb) to flash via Odin.
Ohh, bad luck strikes again:
<ID:0/011> system.img
<ID:0/011> Complete(Write) operation failed.
cannot write system.img :/
Any ideas?
Unlock your bootloader with omapflash. Although even if it does unlock, Your emmc/board probably has died.
a manta wrote this.
beekay201 said:
Unlock your bootloader with omapflash. Although even if it does unlock, Your emmc/board probably has died.
a manta wrote this.
Click to expand...
Click to collapse
can you please me guide how to do the omapflash?
I've downloaded a file called OMAPFlash_tuna.zip.
- Set battery of the device aside
- Plug device into USB, let it detect the device and flash the SBF I think.
That'd be all?
beekay201 said:
Unlock your bootloader with omapflash. Although even if it does unlock, Your emmc/board probably has died.
a manta wrote this.
Click to expand...
Click to collapse
Pardon me, if EMMC/Board is dead; why does it boot or get into bootloop? There is something that reflashes itself; it even overrides odin or heimdall...
Have you tried going back to completely stock using the method outlined here? http://forum.xda-developers.com/showthread.php?t=1626895
jhonnyx said:
can you please me guide how to do the omapflash?
I've downloaded a file called OMAPFlash_tuna.zip.
- Set battery of the device aside
- Plug device into USB, let it detect the device and flash the SBF I think.
That'd be all?
Click to expand...
Click to collapse
Read this thread
http://forum.xda-developers.com/showthread.php?t=2016628
a manta wrote this.

Soft bricked

Hello everyone, today I installed TWRP recovery, it went fine and I am not new to install custom roms, custom recoveries, etc. but this got my phone messed up. It was working perfectly fine and then I turned it off in the night and in the morning, it just got stuck in a bootloop, and knowing me of course, I forgot to create a backup as I installed TWRp. So, is there any kind fellow out there that has a TWRP backup at hand for the ZE551ML?
Just to get the order correct...
Flashed TWRP - No problem
Rebooted to system - No problem
System worked?
Turned off phone
Bootloop on power on?
Is this a bootloop, or does it just sit on the Asus screen? Does it get to the actual boot animation, or are you on the splash screen?
Harfainx said:
Just to get the order correct...
Flashed TWRP - No problem
Rebooted to system - No problem
System worked?
Turned off phone
Bootloop on power on?
Is this a bootloop, or does it just sit on the Asus screen? Does it get to the actual boot animation, or are you on the splash screen?
Click to expand...
Click to collapse
I am getting to the boot animation with the gears turning and then error comes up and boots me into TWRP. The problem is, the Bootloader will not come up so I can do the fastboot flashing, TWRP comes up instead. It comes up and I didn't overwrite the bootloader with TWRP. Problem is I can't access fastboot commands.
Lurkingintheshadows said:
I am getting to the boot animation with the gears turning and then error comes up and boots me into TWRP. The problem is, the Bootloader will not come up so I can do the fastboot flashing, TWRP comes up instead. It comes up and I didn't overwrite the bootloader with TWRP. Problem is I can't access fastboot commands.
Click to expand...
Click to collapse
Give me a few minutes. I'll get you a TWRP flashable boot.img zip.
Try flashing this in TWRP. You might need to sideload it onto your phone if you can't boot into system.
Harfainx said:
Try flashing this in TWRP. You might need to sideload it onto your phone if you can't boot into system.
Click to expand...
Click to collapse
Thank you. But, it won't flash, I've tried about every option now. I think I'm just going to see if I can get a replacement. 2.19 was always causing me problems to install and then now that I finally got it on my phone, I couldn't install another 2.19 on top of it or downgrade. Guess this phone is done for until CM12 gets released. Thanks for the help but it seems it can't be recovered at this point.
Lurkingintheshadows said:
Thank you. But, it won't flash, I've tried about every option now. I think I'm just going to see if I can get a replacement. 2.19 was always causing me problems to install and then now that I finally got it on my phone, I couldn't install another 2.19 on top of it or downgrade. Guess this phone is done for until CM12 gets released. Thanks for the help but it seems it can't be recovered at this point.
Click to expand...
Click to collapse
If you lurk on these forums, there are some Intel flashing tools I've seen that can help you recover from a soft brick.
I am stuck too!
I was in stock recovery and did a cache wipe. It took forever and wouldn't come out of it so i powered it off and tried booting. It got stuck on bootloop. phone is asus zenfone 2 Z00A. It is intel chipset. please help me out.
the worst part is that i cant get into fastboot or recovery modes so i am completely stuck! please help me out.
when i try to get into fastboot mode with vol up+ power key it vibrates but nothing is displayed.
if i just power it on its stuck on bootloop.
i can't get into recovery and fastboot bcoz its at the same place.
can i use adb commands or fastboot commands somehow?
i can maybe use adb reboot recovery to get into recovery and then i can do a wipe and flash new stuff.
please help me out.
UPDATE: I found out u can use adb reboot recovery while on the asus bootanimation.
i tried adb reboot recovery and now getting a flashing android sleeping bot with error!
can't use adb or fastboot commands now though
now in even bigger mess. after using adb reboot recovery, i can't get to bootanimation either.
just stuck at flashing android sleeping bot with error.
can't get to bootloader or fastboot or anything!
Please any suggestions. I'm dying here to fix it.
I have a adb backup.
i couldn't take a nandroid backup. i just entred recovery and wiped cache first. after doing that i was going to flash twrp and then using twrp take a nandroid backup and flash a custom rom. but it got stuck at cache wipe and i powered it off and the whole mess.:
Finally entered bootloader with fastboot now working!
Content and satisfied
I_am_sid said:
I was in stock recovery and did a cache wipe. It took forever and wouldn't come out of it so i powered it off and tried booting. It got stuck on bootloop. phone is asus zenfone 2 Z00A. It is intel chipset. please help me out.
the worst part is that i cant get into fastboot or recovery modes so i am completely stuck! please help me out.
when i try to get into fastboot mode with vol up+ power key it vibrates but nothing is displayed.
if i just power it on its stuck on bootloop.
i can't get into recovery and fastboot bcoz its at the same place.
can i use adb commands or fastboot commands somehow?
i can maybe use adb reboot recovery to get into recovery and then i can do a wipe and flash new stuff.
please help me out.
UPDATE: I found out u can use adb reboot recovery while on the asus bootanimation.
i tried adb reboot recovery and now getting a flashing android sleeping bot with error!
can't use adb or fastboot commands now though
now in even bigger mess. after using adb reboot recovery, i can't get to bootanimation either.
just stuck at flashing android sleeping bot with error.
can't get to bootloader or fastboot or anything!
Please any suggestions. I'm dying here to fix it.
I have a adb backup.
i couldn't take a nandroid backup. i just entred recovery and wiped cache first. after doing that i was going to flash twrp and then using twrp take a nandroid backup and flash a custom rom. but it got stuck at cache wipe and i powered it off and the whole mess.:
Finally entered bootloader with fastboot now working!
Content and satisfied
Click to expand...
Click to collapse
how did you get fastboot working? I can get into bootloader, but cant get my pc to connect with my zenfone2. can't use any adb cmd it would just say "error: can't find devices"
I_am_sid said:
I was in stock recovery and did a cache wipe. It took forever and wouldn't come out of it so i powered it off and tried booting.
Click to expand...
Click to collapse
Just a reminder to everyone, never force shutdown the Phone during a cache wipe procedure, it takes a long time but it finishes.
When I did it on my ZF2, I thought it was taking too long, but I did a search here and found out about it taking long before it was too late.
I'm glad you could recover yours. :good:
I shut mine down because it took too long. Wouldn't start up again. Had to send it in for RMA. Asus Canada reset the OS. I'll never do that again.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
ikkuy said:
how did you get fastboot working? I can get into bootloader, but cant get my pc to connect with my zenfone2. can't use any adb cmd it would just say "error: can't find devices"
Click to expand...
Click to collapse
Dude you can never use adb when in bootloader.
That's why you have fastboot.
just type
fastboot devices
you will get your device.
if you don't then download intel drivers. You will get them in asus website.
if you are stuck without custom recovery i would suggest you to download system image (~1.5Gb) from asus website.
just search for asus zenfone 2 and go to official asus site. in downloads tab you should find both drivers and system image.
download the latest one.
See if you can get into stock recovery.
when in bootloader press vol down and go to recovery mode.
you will see a sleeping android bot with error.
press power key + vol down you will get a list.
choose factory reset and then after wipe is complete choose sideload from adb.
connect your phone and then in adb type
adb sideload filename.zip
obviously place file in your platform-tools folder and replace filename with whatever its name is.
it will take a while and you will get back your system.
---------- Post added at 07:37 PM ---------- Previous post was at 07:21 PM ----------
Marteicos said:
Just a reminder to everyone, never force shutdown the Phone during a cache wipe procedure, it takes a long time but it finishes.
When I did it on my ZF2, I thought it was taking too long, but I did a search here and found out about it taking long before it was too late.
I'm glad you could recover yours. :good:
Click to expand...
Click to collapse
Thanks!
It took a lot of time though.
For anyone stuck,
I first got fastboot working. and then i flashed stock recovery and boot.
got into stock recovery and sideloaded system img into it.
After it booted back into asus stock rom i unlocked bootloader, placed twrp in sdcard and got straight into fastboot again installed twrp and then did a wipe and went ahead and flashed ROM and Gapps. Working fine.
Update:
To get to bootloader:
i was stuck in a bootloop.
When at asus boot animation i connected USB cable and quickly typed
adb reboot bootloader
which seemed to work for me. Though i couldn't get into recovery.
So i had to flash stock recovery again.

[Brick phone] help needed

I have flashed many phones before my G4 and this is the first time I'm having to ask for help.
The firmware installed was AICP CM13, then the screen went green with a DemiGod message. I held the vol down button to reboot and it came back up. After a few restarts and green screens i figured I needed to reflash the firmware. I booted into Recovery and while wiping the device to flash a new firmware, TWRP crashed. After leaving it for half hour or so, I took the battery out to enter into TWRP so I can flash the new firmware. TWRP is no there to be seen. I hold down the vol down and power button, releasing power for second or two and choose to go into recovery. Every time the phone just gets stuck on the LG screen displaying "Bootloader state :Bootlader unlocked!".
In short, I have no firmware, the device has been wiped and TWRP doesn't seem to be working.
I have tried to flash a KDZ file (H81520A_00.kdz) using the flash guide here. This comes back as unsuccessful saying "connection to server failed". As shown below.
View attachment 3605673
The method to flash an .img file using cmd on the pc includes moving the 4gb .img file to the parent folder of the phone storage. I can't get to move any files whatsoever to my device so figured this method would not work.
Seems if I can somehow flash TWRP, then I should be able to install a new firmware.
Any help much appreciated.
Hi, Can you get an ADB connection to your phone, or get your phone into bootloader somehow. From there you could try 'fastboot boot recovery.img'?
If so, then from within TWRP you can flash twrp recovery so the recovery is then sorted. Then you could flash click here (the full version). This will then allow LG UP to find a connection. From there if you really wanted to can flash any KDZ as a proper reset. Hope it works buddy!!
rav101 said:
Hi, Can you get an ADB connection to your phone, or get your phone into bootloader somehow. From there you could try 'fastboot boot recovery.img'?
If so, then from within TWRP you can flash twrp recovery so the recovery is then sorted. Then you could flash click here (the full version). This will then allow LG UP to find a connection. From there if you really wanted to can flash any KDZ as a proper reset. Hope it works buddy!!
Click to expand...
Click to collapse
I can get into recovery but I am unsure as to how I could try 'fastboot boot recovery.img'. Would that be the same as flashing an img when the root method first came out?
AndHD2 said:
I can get into recovery but I am unsure as to how I could try 'fastboot boot recovery.img'. Would that be the same as flashing an img when the root method first came out?
Click to expand...
Click to collapse
Just to make sure you know. TWRP is your recovery. Your last message said you did not have TWRP?
When I first rooted my phone (and subsequently when I install a .kdz), I have to go into the bootloader and install TWRP. I personally do this by using the above command "fastboot boot recovery.img" with the recovery.img being placed on my computer in the same location as my adb installation. This command only boots up TWRP but does not flash it. I then flash twrp by having a copy of it on my external sd card. Within twrp you can select to flash zip, or there is an option to flash an image. I use this to flash twrp (from twrp... its a little inception like but it works). Once you have twrp up and running, you can install a rom. If you want to do flash a .kdz, I have found you need to be on a stock based rom in the first place hence why i referenced the v20a full system zip.
Hope that made sense.
Regards,
Ravi
It is late here and with me being tired I said recovery instead of download. I can boot into download mode but when I try to boot into recovery then it just goes straight to the LG splash screen and it will either remain in that screen or the green Demigod screen would come up.
I'm off to sleep and away from my laptop as I have to be up in 5 hours. Luckily I still have my Note 4 so at least I'm not without a phone in the morning. I will try the steps what you have suggested just as soon as I get back from work.
Many thanks
rav101 said:
Just to make sure you know. TWRP is your recovery. Your last message said you did not have TWRP?
When I first rooted my phone (and subsequently when I install a .kdz), I have to go into the bootloader and install TWRP. I personally do this by using the above command "fastboot boot recovery.img" with the recovery.img being placed on my computer in the same location as my adb installation. This command only boots up TWRP but does not flash it. I then flash twrp by having a copy of it on my external sd card. Within twrp you can select to flash zip, or there is an option to flash an image. I use this to flash twrp (from twrp... its a little inception like but it works). Once you have twrp up and running, you can install a rom. If you want to do flash a .kdz, I have found you need to be on a stock based rom in the first place hence why i referenced the v20a full system zip.
Hope that made sense.
Regards,
Ravi
Click to expand...
Click to collapse
I have finally got chance to sit down and have a go at performing the procedure listed above. I downloaded the adb and fastboot installation as outline here. It is the minimum to what this thread says I will need for my device. I moved the recovery.img to the installation location which were in Windows/programs files (x86)/Minimal adb and fastboot. I launched the program and typed in 'fastboot boot recovery.img'. I tried this in download mode, charging mode (phone off) and while on the LG flash screen where TWRP didnt load but in all cases I have had no response at all.
If someone can help the much appreciated.
AndHD2 said:
I have finally got chance to sit down and have a go at performing the procedure listed above. I downloaded the adb and fastboot installation as outline here. It is the minimum to what this thread says I will need for my device. I moved the recovery.img to the installation location which were in Windows/programs files (x86)/Minimal adb and fastboot. I launched the program and typed in 'fastboot boot recovery.img'. I tried this in download mode, charging mode (phone off) and while on the LG flash screen where TWRP didnt load but in all cases I have had no response at all.
If someone can help the much appreciated.
Click to expand...
Click to collapse
Hi @AndHD2, I'm sorry but I can't think of anything else
rav101 said:
Hi @AndHD2, I'm sorry but I can't think of anything else
Click to expand...
Click to collapse
I had another demigod type screen but this was grey and not green with less detail. However it did say it were a kernel error.
Is the handset still under warrenty with the bootloader unlocked. I have a feeling its not

My OP3 is Dead! Any help is appreciated!

Long story short, I made my phone bricked with a small mistake:
I had Freedom OS (latest build) and then tried to flash Miui rom. To do so, I needed to flash back to official Hygrogen/Oxygen OS (MM). The mistake I made was to lock bootloader first. Then, phone got into bootloop....I searched and found Qualcomm software can revive any Qualcomm phone. I downloaded Qualcomm app and driver for Oneplus 3 and tried reviving my phone....What happened finally was that the phone was restarted and a screen showing Cache failed, System failed, userdata failed appeared. I tried to find Cache, system img ...of OOS 4.02 to flash separately....while I couldn't find them anywhere...I just tried fastboot flashing a recovery (both official and TWRP) but got error that partition doesn't allow writing (I guess because phone is locked now)....anyway, phone can boot only in fastboot and I wonder what else I can do....
Any help is very much appreciated!
alireza.nasibi said:
Long story short, I made my phone bricked with a small mistake:
I had Freedom OS (latest build) and then tried to flash Miui rom. To do so, I needed to flash back to official Hygrogen/Oxygen OS (MM). The mistake I made was to lock bootloader first. Then, phone got into bootloop....I searched and found Qualcomm software can revive any Qualcomm phone. I downloaded Qualcomm app and driver for Oneplus 3 and tried reviving my phone....What happened finally was that the phone was restarted and a screen showing Cache failed, System failed, userdata failed appeared. I tried to find Cache, system img ...of OOS 4.02 to flash separately....while I couldn't find them anywhere...I just tried fastboot flashing a recovery (both official and TWRP) but got error that partition doesn't allow writing (I guess because phone is locked now)....anyway, phone can boot only in fastboot and I wonder what else I can do....
Any help is very much appreciated!
Click to expand...
Click to collapse
Try this method now it will work
https://forum.xda-developers.com/showpost.php?p=68245482&postcount=111
The point is I can't flash anything on any partition as phone is locked and can't be unlocked!
alireza.nasibi said:
The point is I can't flash anything on any partition as phone is locked and can't be unlocked!
Click to expand...
Click to collapse
If you can access fastboot mode then you can definitely flash by other method
abhi0502 said:
If you can access fastboot mode then you can definitely flash by other method
Click to expand...
Click to collapse
you mean the 2nd method?
You said you lock the bootloader in 5th line, in order to flash any recovery you need to unlock bootloader again.
I also tried to lock bootloader last week and then my op3 got bricked with bootloop.
-First get into fastboot and unlock bootloader this will wipe your all data including you saved ROM files.
- after this flash TWRP or OnePlus recovery and sideload OOS ROM. Or transfer the ROM file using mtp in TWRP recovery.
- then you can easily do anything you want. Don't relock bootloader.
Those red things on your screen basically means your phone misses partitions, without these partitions it doesn't boot duhh.
If method 2 of the unbrick tool doesn't work, you can manually flash those files in Fastboot, the program has a folder that has all partitions like, cache.img, boot.img etc. I've been here as well nothing to worry about just keep us updated so we can help you
There's no mention in your post on which unbrick method you used. Was it first or second? By the looks of the end result, it was the first.
Just follow the same steps, but use method 2, that should leave you with a phone like out of the factory. Afterwards, you can simply set it up and let it update through OTA if you want to remain stock, or simply unlock bootloader, flash TWRP and flash whatever you want.
use the second method. the file you have to download contains all the raw room and when you follow the process, it would work. happened to me two times and i used this method
Just simply use fastboot oem unlock in fastboot mode then flash a recovery via fastboot flash recovery then go to recovery and once wipe all the partions and install a rom and then tried booting
Thank you all for your time and support. Method 2 saved my phone!

Categories

Resources