Features
Interactive governor as default
CFQ I/O scheduler as default
bic TCP congestion scheduler
Full init.d scripting support
SE Linux set to permissive (will prevent private mode from working and other items depending on kernel needing to be set to Enforced)
Fully working Auto-Root for all 5.1.1 roms (should work for AOI6 and AOJ6...and possibly older versions...please post your version if it's not one of these)...
THIS WILL TRIP KNOX
Thanks to the S6 Overload, @g.lewarne and his UniKernel...
v9 initial - 120615
No longer beta! Yay!...
Disabled selinux and auditd...
Reverted to UniKernel v8 Interactive and VM settings...
v9 beta - 120315
Used dt.img and ramdisk from 111215...used stock dt.img which caused boot.img to be too large and not flash...
Now compressing ramdisk with lzma...
v9 beta - 120215
Removed "Add lz4 compressor and crypto modules" commit and added "Compressor: Add lz4 modules, Speedup lz0" commit
v9 beta - 111215
Based on AOJ6
Added ROW scheduler
Implementation of /system/unikernel.prop (more about this, below, in the second post)
selinux: Do not allow mode changes [HACK]
sd: Avoid sending medium write commands if device is write protected
binfmt_elf.c: use get_random_int() to fix entropy depleting
arm64: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS
Revert "staging: binder: Change binder mutex to rtmutex."
Usb: Gadget: Add DriveDroid support
Add lz4 compressor and crypto modules
lz4/lz4hc fixes
GPU: Mali: Rework Throttling and DVFS control
Block: Add BFQ and FIOPS Schedulers, Optimize Deadline
cpufreq: exynos-mp-cpufreq: Add calibrated power coefficients
Squash of AndreiLux's power efficiency patch set
cfq-iosched: fix the setting of IOPS mode on SSDs
block: Make CFQ default to IOPS mode on SSDs
writeback: Fix occasional slow sync(1)
fs/sync: Make sync() satisfy many requests with one invocation.
block: Reserve only one queue tag for sync IO if only 3 tags are available
block_dev: implement readpages() to optimize sequential read
jiffies conversions: Use compile time constants when possible
readahead: make context readahead more conservative
sync: don't block the flusher thread waiting on IO
writeback: fix writeback cache thrashing
Make sure you have OEM Unlocking enabled in Developer Options before flashing kernel...
No, seriously...go to Settings > Developer Options > OEM Unlocking...On? Good...continue...
Downloads
G928P - https://www.androidfilehost.com/?w=files&flid=43376
G928R4 - in search of AOJ5 boot.img...or try the P version and let me know if it boots...
Source
https://github.com/djvoleur/G_N92XP-R4_AOJ6
/system/unikernel.prop
Below are the lines added to unikernel.prop and their default settings...
kernel.turbo=false (default) or true
kernel.interactive=battery (default) performance
kernel.scheduler=cfq (default) noop deadline fiops bfq row
kernel.vm=tuned (default) or stock
kernel.gapps=true (default) or false
kernel.initd=true (default) or false
If you want to what they exactly do, click here
For now, you will need a file explorer (with root access) to make changes to the file...just make sure that it keeps the permssions rw-r--r-- (or 644) and you will have to reboot for the changes to take effect...
Project
Here is what I have so far with the app...
View attachment 3501423
It will be able to apply the settings dynamically without having to reboot the phone and save the settings to the unikernel.prop file...I'll let everyone know once this has been completed...
Since there were changes made to this kernel
Can someone verify it boots and what their baseband is?
It boots and runs on OI6
Sent from my SM-G928P using Tapatalk
Can anyone verify that this kernel in fact works on the oj6 update. Been waiting to root because i updated and didnt have a kernel to flash.
Kstambaugh09 said:
Can anyone verify that this kernel in fact works on the oj6 update. Been waiting to root because i updated and didnt have a kernel to flash.
Click to expand...
Click to collapse
Yeah, that sux, I'm gonna check into replacing the boot in the new update
Kstambaugh09 said:
Can anyone verify that this kernel in fact works on the oj6 update. Been waiting to root because i updated and didnt have a kernel to flash.
Click to expand...
Click to collapse
I've seen two posts that have reported it works with OJ6...for you lurkers
Lol. Im running the kernel. Seems ok. Sometimes a little laggy.
There's an update! Check the OP for the download link...
Doesnt work for me.
djvoleur said:
There's an update! Check the OP for the download link...
Click to expand...
Click to collapse
Today's update failed to boot for me, tried zip file and img file. I'm on Sprint 0I6, both files get stuck at the Samsung Edge screen.
Beandip-Javier said:
Today's update failed to boot for me, tried zip file and img file. I'm on Sprint 0I6, both files get stuck at the Samsung Edge screen.
Click to expand...
Click to collapse
Same here.
Sent from my SM-G928P using Tapatalk
Is there any chance of overclocking? I liked to see a least 1.8 for the one cpu with hotplug. Is there a chance of deep sleep module being added as well. I'm coming from the note 3 which I had it up to 2.7ghz.
GamerOnOne said:
Is there any chance of overclocking? I liked to see a least 1.8 for the one cpu with hotplug. Is there a chance of deep sleep module being added as well. I'm coming from the note 3 which I had it up to 2.7ghz.
Click to expand...
Click to collapse
Deep sleep has already been applied...
Probably not on the overclocking...
Updated! This should boot...let me know if it does...
djvoleur said:
Updated! This should boot...let me know if it does...
Click to expand...
Click to collapse
I've downloaded it and it does boot, will see how it behaves. Thank you
Flashed and working.
Update! Check OP for download link!
Going to update to ok3?
Is there anyway to integrate hotplug and bring both cpus down to one core each when in sleep mode.
On UsCellular (928R4) AOJ5... sorry for being a noob... how would I get you the boot image? Also, I where can I get stock image in case issues arise if I try the "P" build, sammobile?
Download :
Flash via Odin
MOD EDIT: DOWNLOAD LINKS REMOVED
Flash Zip
MOD EDIT: DOWNLOAD LINKS REMOVED
Aroma installed , chosed devices G920P or G925P
* AUTO-ROOT SYSTEM-LESS SuperSU v2.56 (on flash odin) , SuperSU v2.71 on flash zip
* Based on official Samsung source: Samsung OSRC
* ramdisk base: G920PVPU2BPC6 on G920P andG925P
* KNOX WARRANTY VOID: 1
* KNOX Remove All
* SELinux PERMISSIVE (default) or ENFORCING
* DEEP SLEEP FIX
* Compiled with UBERTC GCC 5.3.1 20160401 + Graphite optimizations
* Linux 3.10.101
* init.d script support (drop in script & set permissions to 755 or 777 and reboot)
* adb insecure
* Mali GPU DVFS disabled for min/max frequencies
* Secure storage = false (should prevent WIFI settings & passwords wiping on reboots)
* Synapse app support for many kernel configurations
The ramdisk base that u say you used is the software version for the Sprint Note 5. The S6 version ends in PB6. Is this a typo?
Sent from my SM-N920P using XDA-Developers mobile app
So does this kernel work?
Sent from my SM-G925P using XDA-Developers mobile app
Bobthahog said:
The ramdisk base that u say you used is the software version for the Sprint Note 5. The S6 version ends in PB6. Is this a typo?
Sent from my SM-N920P using XDA-Developers mobile app
Click to expand...
Click to collapse
edited
Lol, its pb6 or pc6?
Can i use it for Dual Boot?
synapse doesn't seem to work with the last flashed kernal i cam e form sky high and it worked till i flashed this kernal????
any ideas
stock rooted galaxy s6 rom 6.01
LOL -- oops, wrong thread. Apologies [content deleted].
Thanks you.
synapse not working? it says device not supported sm-g925p
so far it seems really good actually with no tweaking because synapse isnt working, other than that ive gotten better battery life then when using dirtyMM kernel
Can you please upload kernel and any other relevant GPL licensed sourcecode? If it is 100% samsung official, please link to it.
lamlazy said:
Download :
Flash via Odin
MOD EDIT: DOWNLOAD LINKS REMOVED
Flash Zip
MOD EDIT: DOWNLOAD LINKS REMOVED
Aroma installed , chosed devices G920P or G925P
* AUTO-ROOT SYSTEM-LESS SuperSU v2.56 (on flash odin) , SuperSU v2.71 on flash zip
* Based on official Samsung source: Samsung OSRC
* ramdisk base: G920PVPU2BPC6 on G920P andG925P
* KNOX WARRANTY VOID: 1
* KNOX Remove All
* SELinux PERMISSIVE (default) or ENFORCING
* DEEP SLEEP FIX
* Compiled with UBERTC GCC 5.3.1 20160401 + Graphite optimizations
* Linux 3.10.101
* init.d script support (drop in script & set permissions to 755 or 777 and reboot)
* adb insecure
* Mali GPU DVFS disabled for min/max frequencies
* Secure storage = false (should prevent WIFI settings & passwords wiping on reboots)
* Synapse app support for many kernel configurations
Click to expand...
Click to collapse
Quick question: how do I change SELinux to enforcing? When I do the install, it's not a choice. Not sure how to do it otherwise...
hamstrman said:
Quick question: how do I change SELinux to enforcing? When I do the install, it's not a choice. Not sure how to do it otherwise...
Click to expand...
Click to collapse
Get a kernel manager app like Synapse and it will be under security settings.
Sent from my SM-G920P using XDA-Developers Legacy app
jcase said:
Can you please upload kernel and any other relevant GPL licensed sourcecode? If it is 100% samsung official, please link to it.
Click to expand...
Click to collapse
THREAD CLOSED as it doesn't meet the requirements for Development
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
List of Supported
Variants
SM-G930S/K/L/F/FD/W8
SM-G935S/K/L/F/FD/W8
ROMs
TouchWiz N base all ROMs (Stock, S8 port ROMs, Note 7/8 port ROMs)
AOSP 7.1.2 & 8.x base all ROMs (Lineage, RR, crDroid & AICP & more...)
Main Features
OSRC's latest Note-FE & S7 source code base.
Using the AnyKernel2(Flashing Tool).
Synapse support.
SELinux Permissive / Enforcing switchable (+ Fake Enforcing Mode).
Linux-stable 3.18.y upstream.
Compile with UBERTC 6.4.1 toolchain.
F2FS support (/data, /cache only).
Optimized for Exynos8890 using the Exynos-M1 flag for compile options.
Gametuner-Mod
Game Booster Mode
intelligent performance enhancement mode in conjunction with Samsung-Gametuner.
Fake KNOX.
chacha20 to random (entropy).
Linaro LSK-v3.18-Energy-Aware Scheduler (EAS) port.
EAS simplifies power and performance management through scheduler-driven tuning to manage more efficiently.
Linux-v3.18 already has EAS installed, but with the LSK-v3.18-EAS, the existing EAS has been further improved and the user can choose between tuning power efficiency and performance.
Linaro v3.18/topic/OPPv2 branch merge.
Lazytime mount options
improved storage performance and longevity.
Similar to DynamicFsync, but operates at the file system level and has no risk of data loss.
CPU/GPU UC & OC.
Limit the maximum overclock range according to the device's ASV value (device yield) to prevent excessive overclocking.
CPU/GPU/BUS voltage control.
GPU Performance Tuning.
Performance/balance/battery separated DVFS user settings.
Thunder Hotplug driver port.
HMP tuning Interface.
Detail charging circuit control allows faster charging.
Added I/O Scheduler 'bfq, fifo, fiops, row, sio, maple, tripndroid, zen'.
Enable Westwood tcp/ip congestion control (not default).
LED FADE control.
PWM Flicker free.
boeffla's generic wakelock blocker driver.
Qualcomm interactive (renamed cafactive) cpu governor porting.
Added battery-friendly 'relaxed' governors, and more.
Provides an add-on that keep kernel settings on unrooted devices.
Synapse: System Tweak add-on available.
Synapse: Provides configuration profile separated by performance/battery/stability.
Many other optimization applications.
How many users are there in this kernel and what is it with custom ROM?
* Go to User Statistics.
With this kernel, the following information is sent once to the developer's server at boot time.
variant, android serial number(not device serial), name of current firmware(ROM), country code, kernel version
* This information is Android apps can see without any special permissions.
* If you suspect other information transfer, open the '/res/synapse/actions/addon' file.
Description for AOSP ROMs
If you are using another developer's custom kernel, or if using ramdisk is corrupted kernel, you may encounter a bootloop or an unknown problem.
If you have a bootloop problem, flash the PRIME kernel after first flashing the builtin kernel in your ROM. (Or flash the ROM again)
This kernel is flashed AnyKernel method, for all kinds of AOSP ROM support.
Download
Latest Version | Older Version
Community
Telegram Group: https://t.me/primekernel
Naver Cafe (for Korean): http://cafe.naver.com/primeusers
How do I enable donation-only add-on features?
Credit (Thanks. to)
@AndreiLux - Perseus8890 kernel.
@tkkg1994 - refer to some Commits.
@arter97 - cafactive & more.
@osm0sis - AnyKernel2.
@jesec - AOSP kernel source.
@Wootever - PWM Flicker Free.
All members of the PRIME-Kernel NaverCafe.
And all of commited in sources & all of xda developers.
XDA:DevDB Information
PRIME-Kernel, Kernel for the Samsung Galaxy S7
Contributors
Hyunwoo AHN
Source Code: https://github.com/dwander/Linaro-base/tree/herolte
Kernel Special Features: Linaro-LSK-3.18-EAS Port, Gametuner-MOD, Intelli-Performance
Version Information
Status: Stable
Current Stable Version: 2.1.2
Stable Release Date: 2017-12-17
Created 2017-09-23
Last Updated 2017-12-17
How do enable donation-only add-on features?
I only receive donations from your heart.
Do not donate if you intend to unlock synapses.
If you are unable to make a donation of 5.0 USD or more due to economic reasons, please do not donate and request me to unlock Synapse. Then you can use all the functions of synapse without donation.
How to request synapse unlock
Please tell [email protected] the following:
- A matter that is difficult for you to donate(eg economically difficult countries, students without money or credit card).
- The first five letters or screenshots of the KeyCode on the Synapse's first screen.
Change Log
v2.1.2
fixed bluetooth issue in AOSP 8.1
Linux upstream to v3.18.88
v2.1.1
Linux upstream to 3.18.87
Add Android O (8.x) support
Add new commit for AOSP support
Changed AOSP build to TouchWiz base (Integrated AOSP and TW kernel source code)
Fixed WiFi-Hotspot issue for N8 porting ROM
Fixed an issue where the charge state switching notification did not work
Note-FE GPU driver (r15p0) build droped
r12p1 GPU driver is built back into the package
Minor bug fixes
v2.0.1
Reuse AutoASV
Over clock limit relaxed
Removing the State Notifier Driver & Using the FB Driver
Fixed a bug where two big cores could not be used (v2.0)
Corrected the overclock value to actually apply when boosting the big core
Synapse: Memory: Z-Swap compression algorithm selection option removed
Synapse: Labs: gms drain patch removed
v2.0.0
base: Re-based on Note-FE source code
linux: upstream to v3.18.83
f2fs: Updated latest from f2fs-stable branch
init: Fixed video playback delay issues reported by some N8 porting users
tcp: Change the TCP congestion control algorithm default to Westwood (stock: bic)
Synapse: Fixed the problem that the Intelli-Performance setting is released after rebooting
GPU: Remove unnecessary ipa update code
exynos: Separate AutoASV in 5 steps
exynos: Changed AutoASV not to participate in overclock value(only used for big Core boosting)
mm: Change Z-Swap compression algorithm default to lzo(stock value)
Synapse: Memory: Added Z-Swap compression algorithm selection option
Synapse: Add Labs tab
Synapse: Storage: Resolve compatibility issues with DualSIM models
installer-zip: Include a RAMdisk for TouchWiz for all supported models in package(no need for stock kernel flashing)
installer-zip: After the kernel flashing is complete, it automatically flashes when Magisk or SuperSU files are found.
v1.9.3
Upstream to Linux 3.18.80
Synapse->Utility: Added Android ID management function
Synapse->Advanced: Added option to switch to Enforcing mode after booting
Synapse Add-on Updated to v6.4.2
selinux, Improved fake Enforcing
Use new random driver functions
Removing Gametuner-MOD from AOSP build
Minor bug fix
v1.9.0
Supported Note 8 Porting ROMs
Backported random(entropy) driver from Linux v4.14.rc7
Updated AnyKernel2 (bug fix)
Updated mptcp(Multipath TCP) driver (0.90.0 → 0.90.3)
installer, Prevent Magisk from being deleted when merging ramdisk
Reduced screen brightness during boot
r12p0/r15p0 GPU driver to separate build, packaged in one
! Please read the 'Attention to the GPU driver' part on the first page.
v1.8.2
Linux upstream to v3.18.78
Merge G935F DQJ1 firmware sources
Merge Note-FE AQI4 firmware sources
Fix SafetyNet bypass issue.
f2fs: fix potential panic during fstrim
selinux: Apply Fake-Enforcing mode
In Enforcing mode, it actually works in Permissive mode.
Thanks to @jesec
Synapse: minor bug fix
v1.8.0
• Linux 3.18.76 upstream.
• fully merged Note-FE AQH3 firmware sources.
- There are very very many improvements(bad sammy!)
- Not applicable for AOSP binaries• Added boeffla's generic wakelock block driver. by @andip71
• Synapse > wakelock: Add generic wakelock.
• Synapse: Some English translation.
v1.7.0
• Linux 3.18.75 upstream
• Added IPA update for cafactive, ironactive, impulse governors.
• Added relaxed CPU governor
- Conservative based battery-friendly governer, with performance degradation.• ironactive, impulse governor removal.
• Synapse: Added EAS-Tune tab.
- Boost support separated by global, top-app, background, and foreground items.
v1.6.0
Linux 3.18.73 upstream.
Selinux: permissive/enforce mode switching support.
Synapse: Improved to work in Enforce mode.
Synapse: Improved the SynapseLoader add-on to work in Enforce mode.
Synapse: Added SELinux Enforce option.
- More complete SafetyNet bypass & KakaoBank compatible.Synapse: Updated addon (v6.4.0)
Install-zip: Prevent Magisk from reverting kernel init files before.
Install-zip: Added init binary hexpatch to support f2fs conversion of cache partition.
v1.5.2
aosp: Reduce the haptic feedback strength default by 50%.
synapse: misc: Added haptic feedback intensity control to AOSP.
v1.5.1
Enable cgroup_schedtune.
- EAS Schedule tuning (energy or performance) automation support options.
- CFS boost setting is removed accordingly.install-zip: Fixed some bugs in the flashing process.
v1.5.0
Linux 3.18.72 upstream.
G935F-DQIC firmware kernel source merged.
Support AOSP 7.1.2 based custom ROMs.
- Tested: LineageOS, crDroid, RRChanged to AnyKernel method.
Updating the f2fs file system on the f2fs-stable branch.
workqueue improvement.
Apply ADJ_RBTREE to LMK.
Using ARM64 logic on SHA256 / 512.
PWM Flicker Free - Thank's to [email protected]
- information: https://forum.xda-developers.com/s7-edge/development/amoled-pwm-s7-edge-t3517739Synapse - Added WakeLock control.
- Some are not supported in MTweaks, I recommend using Synapse.Synapse: Added CPU Voltage margin setting.
There are many more minor changes.
v1.4.0
EAS: Adding a missing commit.
- Fixed temperature rise problem in some high-end games.GPU: DVFS tuning.
Synapse: Correct default settings when selecting maple IO scheduler.
init: cfs_boost Adjust the default value to 0.
zip-installer: Mali-R12P0 & R15P0 Include the GPU driver in the package.
v1.3.2
Linux 3.18.71 upstream.
changed the source code base to G935FXXU1DQH8.
improved crypto.
fs: updated to the latest in the f2fs-stable branch.
f2fs: support for lazytime mounts.
fstab: support f2fs mount (/system not allowed).
ext4: fix fencepost error in lazytime optimization.
ramdisk: unified with G935FXXU1DQHY base without any 'flat/edge/kor/eur'.
v1.3.0
Disable Exynos-Swap, use ZSwap.
- ZSwap's efficiency is better.Enable zswap_writeback.
Changed the toolchain to gcc-6.4.1 (UBERTC 6.4.1).
Remove the 'perfect C-state residency' related commits.
Back to r12p0 gpu driver.
- Battery efficiency issue of r15p0.Fix synaps FC issue.
- In the case of genuine firmware, FC occurs at the first execution.Optimized & bug fixes for old scripts in synapse.
Ramdisk divided build, global model and Korean model.
- Several issues related to global models.
v1.2.0
Updated with DQH8 firmware source code.
Linux 3.18.15 ~ 70 upstream rework.
NIVIDIA CPU Relax Patch removal.
- In some games, FC or loading loop issue.XPAD Joystick driver update (from Google AOSP 3.18 kernel)
ZRAM, KSM off
- ZRAM is duplicates with VNSWAP
KSM is inefficientSynapse: English translation (90%)
Details(Korean): http://enfree.com/prime/?page=changelog&device=G930
New kernel , i'm going to test now
Tried both with my S8 ROM port.
Boots very slow
When devices i booted it takes some seconds till phone freezes and than reboots!
DirkStorck said:
Tried both with my S8 ROM port.
Boots very slow
When devices i booted it takes some seconds till phone freezes and than reboots!
Click to expand...
Click to collapse
Tell me the name of your custom ROM and the name of your device model.
Hyunwoo AHN said:
Tell me the name of your custom ROM and the name of your device model.
Click to expand...
Click to collapse
My device is SM-G930F and I am using BatMan-Rom V1.3.0
After flashing the kernel I have flashed Magsik 13.6
Thanks
DirkStorck said:
My device is SM-G930F and I am using BatMan-Rom V1.3.0
After flashing the kernel I have flashed Magsik 13.6
Thanks
Click to expand...
Click to collapse
Sorry, can you try again with v1.3.0?
Hyunwoo AHN said:
Sorry, can you try again with v1.3.0?
Click to expand...
Click to collapse
Sorry, my fault. MTweaks was still running what interfered.
Flashed v1.4 with stock GPU drivers. running fine so far but boot time is still longer than with other kernels.
Could you add a global slider to under volt CPU and GPU by a certain value?
EDIT:
In Synapse at "Game Tuner MOD" and "Utility" tab the last few settings are not in englisch
DirkStorck said:
Sorry, my fault. MTweaks was still running what interfered.
Flashed v1.4 with stock GPU drivers. running fine so far but boot time is still longer than with other kernels.
Could you add a global slider to under volt CPU and GPU by a certain value?
Will try this kernel now and report back.
EDIT:
In Synapse at "Game Tuner MOD" and "Utility" tab the last few settings are not in englisch
Click to expand...
Click to collapse
The global slider is hard to implement, because of the UI structure of Synapse.
If you are not comfortable with the Voltage setting, you can get the desired result by returning to Synapse after setting in MTweaks. If you do not know what I mean, try it.
What if it takes a long time to boot? If it is a symptom that only takes longer in the first Bootanimation, it will not be a problem from the second since it recreates the dalvik (ART) cache for some reason.
If it takes a long time to boot each time, it may be because used the G935F ramdisk in this kernel. I tried BatmanROM, but I did not have the problem you said.
In the next version, i will separate ramdisks by variant like v1.3.0.
Korean in the Gametuner-MOD and utility tabs are donation-only functions.
I will translate English donors if they say inconveniences.
Hyunwoo AHN said:
The global slider is hard to implement, because of the UI structure of Synapse.
If you are not comfortable with the Voltage setting, you can get the desired result by returning to Synapse after setting in MTweaks. If you do not know what I mean, try it.
What if it takes a long time to boot? If it is a symptom that only takes longer in the first Bootanimation, it will not be a problem from the second since it recreates the dalvik (ART) cache for some reason.
If it takes a long time to boot each time, it may be because used the G935F ramdisk in this kernel. I tried BatmanROM, but I did not have the problem you said.
In the next version, i will separate ramdisks by variant like v1.3.0.
Korean in the Gametuner-MOD and utility tabs are donation-only functions.
I will translate English donors if they say inconveniences.
Click to expand...
Click to collapse
Ok, tried that with MTweaks and noticed that it was already under volted by my previous settings.
Noticed that there is no tab to disable wakelocks. Do you plan to add this?
EDIT: for now I back to my previous kernel...sorry....
Thanks!
DirkStorck said:
Ok, tried that with MTweaks and noticed that it was already under volted by my previous settings.
Noticed that there is no tab to disable wakelocks. Do you plan to add this?
EDIT: for now I back to my previous kernel...sorry....
Thanks!
Click to expand...
Click to collapse
Kernel-level wakelocks work when requested by an Android system or app.
It is not desirable to force such requests to be ignored.
My Note4 kernel has a wakelock tab. However, it was added because of the deep-sleep problem in some variants of Note4.
If there is a deep sleep (wakelock) problem in our S7, I will add a wake-lock tab.
Again briefly, the wakelock control should not be abused. So, if there are no related problems, I will not add them.
update to v1.5.0
Thanks for supporting AOSP! ?
After flashing 1.5.0 I'm still at 1.4.0 :/
MK73DS said:
After flashing 1.5.0 I'm still at 1.4.0 :/
Click to expand...
Click to collapse
If flashing was completed and there were no errors, it is not possible.
If you rooted or unrooted the kernel after flashing, the old kernel would have been restored.
If you do not know, Flash the kernel after rooting.
Hyunwoo AHN said:
If flashing was completed and there were no errors, it is not possible.
If you rooted or unrooted the kernel after flashing, the old kernel would have been restored.
If you do not know, Flash the kernel after rooting.
Click to expand...
Click to collapse
Indeed, I rooted after flashing the kernel, thank you ^-^
you do a fantastic job with all the feature you added in your kernel(thunderplug,eas, pwm flicker free, etc...). v15 is very recommended
Hey man, thanks for this kernel! I tried it on AOSP for RR which boots but I noticed that flashing this kernel, disabled the option to adjust vibrate intensity. The option in Sound is there but Settings Force Closes when clicking on it. The reason I need to adjust it, is the vibration is back to really strong vibration when touching a key. Hope this details helps. On latest Prime 1.5.0
Andrw0830 said:
Hey man, thanks for this kernel! I tried it on AOSP for RR which boots but I noticed that flashing this kernel, disabled the option to adjust vibrate intensity. The option in Sound is there but Settings Force Closes when clicking on it. The reason I need to adjust it, is the vibration is back to really strong vibration when touching a key. Hope this details helps. On latest Prime 1.5.0
Click to expand...
Click to collapse
issue was raised on edge thread.
https://forum.xda-developers.com/s7-edge/development/kernel-prime-kernel-v1-4-0-t3678159/page5