excessdivide said:
Hello everyone,
Big thanks to the heavy hitters here that are making these units actually usable!
I received my Dasaita HA5217-V600 two weeks ago and thanks to having previously scoured these forums, I was able to install it, in my 2016 Toyota Corolla, with relative ease. Everything worked better than expected, and I had great bluetooth sound, strong WiFi connections, my door and A/C controls appeared on screen, my SWC all matched and decent FM reception. My bluetooth OBDII adapter is arriving this week so I'll have to report back on that.
Click to expand...
Click to collapse
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!
Thanks for the detailed write up. I just ordered mine. Px5 7 inch 2gb ram dasaita. Any tips for a newbie? I've been browsing the forums myself for the past couple of weeks and I'm aware of all the mods and custom ROMs etc. Just asking you if there's maybe any advice you wanna give on how I should proceed with the unit or just generally anything that might help.
Appreciate any reply
I have Dasaita/Hotaudio HA2100-v600 7" device and happy - it works here good!
@ Nasty_z: Stock rom & MCU and ModRom
excessdivide said:
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!
Click to expand...
Click to collapse
Hi, I'm a fellow Corolla owner in FL As well!
I just bought a Dasaita PX3 2GB RAM 16GB (Quad core vs your 8 core PX5 due to it being close to $300 flat on an ebay flash sale) and have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
-Where did you mount the GPS antenna?
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
-Anything unusual with your unit?
-Have you tested Waze and Google maps? Do they run stable?
-Does your unit pickup your wifi automatically when you startup the car?
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.
gab2012 said:
Hi, I'm a fellow Corolla owner in FL As well!
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.
Click to expand...
Click to collapse
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!
I have a similar 9" unit.
Running Malaysk v5 ROM and MTCE v2.71 as the bluetooth for 2.75 didn't work well.
I do have the DAB+ aerial and app and it works ok however mostly I use Google music. I have no problems using Waze or copilot.
What I haven't been able to do is get my reversing camera to show on the screen. I have a wireless version and both halfs have leds that light up when the car is in reverse but no picture regardless of which connection I use.
Also I can't get it to connect to a ELM357 OBD2 dongle.
I've had the unit for 4 months and last week while driving to work the screen went black, the unit was still working it was just the screen. The next time I started the car the screen came back....weird.
Other then this the units ace!
excessdivide said:
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!
Click to expand...
Click to collapse
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.
gab2012 said:
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.
Click to expand...
Click to collapse
Hello I have bought a Dasaita HA2039-S720 for Mitsubishi Outlander 2014. I have the same Issue with my Radio App. Everytime I open it, it goes in background. Kill it with the Task Manager can't stop the Music. I have to reboot the Device. I have MCU Version MTCE_HA_V2.75.1 and ROM px3-userdebug 7.1.2NHG47L eng.hct.20171206.143935 test-keys.
Did a system update realy fix your Problem? I noticed that this happend every time a station is scanned and saved. Delete the Cache and Programm Data from Radio App in the App section fixed the issue but you have no music then but white noise.
I have some Issues with apps in general. Sometimes Apps are crashing and did not load properly and stuck while loading.
My OEM Rear CAM Image is laggy and not very smooth too.
Today I tried to update die Rom with this Version HCT2_px3_7.1(20180206) but it failed. Don't know if it's the right one. The Device found this Image and promptet me to update. After a short loading screen a Faild message appeared on the screen and it showed an options screen. I inserted another SD CARD with the image of the update and choosed "update from SD or USB" but it failed again so I rebooted the system. I choose swipe in the beginning and after a reboot the system was in factory condition.
But can anybody explain me what went wrong and how to properly make a Rom and MCU update.
Thanx
Hey guys I just wanted to become a part of this I just purchased and installed this type radio along with the Bluetooth adapter for the cars computer. Hopefully I will soon get the ATSC digital antenna so I can watch TV when my wife goes in to shop for something that will supposedly: "only take a minute." I have to say the install was incredibly easy. Everything works very well and sounded great connected to my factory system of the 2013 Kia Optima. I did use the radio's subwoofer output and added a 300 watt powered Rockford Fosgate subwoofer. It all sounds amazing together. I attached two photos of the type of radio I purchased (or tried to. Kinda new here).
View attachment 4483442
View attachment 4483443
I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help
Bradsr12 said:
I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help
Click to expand...
Click to collapse
Hello
i don't know which model Focus you have. I have a Focus MK3 from 2012 and i just ordered this unithttps://nl.aliexpress.com/item/Dasaita-Android-8-0-4g-32g-Car-Radio-for-Ford-Focus-2012-2013-2014-2015-Multimedia/32889176494.html?spm=a2g0s.9042311.0.0.1e934c4diSRsuQ
and it comes with a canbus adapter and works great. i received it today and installed it. Everything works out of the box.
Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??
Bradsr12 said:
Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??
Click to expand...
Click to collapse
http://www.hot-audio.com/category/Ford-3.html
I tink they have a car specific unit for you too. Just check out their site. The benefits of these units is that it will fit perfect in your car and all cables and adapters are included...
Btw I have a v840-8 unit
Sent from my SM-G950F using Tapatalk
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.
TBM2 said:
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.
Click to expand...
Click to collapse
Awesome. Thanks for this info @TBM2
How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.
Grims said:
How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.
Click to expand...
Click to collapse
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.
marchnz said:
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.
Click to expand...
Click to collapse
Sorry, I'm just curious as I just got one for my car installed... but the internal microphone performance is horrible. The box came w/ an external microphone, but is there something i need to do to disable the internal microphone?
scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
Like any MTCD unit, first boot is approx 15-20 secs, with the unit sleeping thereafter resulting in 'instant' resume.
Read
Hi Guys,
Can anyone recommend a CAN bus decoder for this head unit as the one supplied with the radio is great receiving messages from the car, but the head unit / CAN bus decoder combi has very, very limited functionality controlling the car settings (only Auto headlights ON/OFF works).
At the moment the car is stuck in KPH (K/100l) and °F - would really like to get the car back to °C and MPH (MPG). I don't know the CAN bus decoder manufacturer as there is no obvious external markings -
CAN BUS DECODER
MH (PA-SS-07) 20171013
SS-PA073271010-1
For: PEUGEOT 407
P/N: 1814600028
Software: PSA V1.00.012BYPS
Thank for any help
Mobi
I have the same one and it works good. In Car settings I switched it to C and KM
I wish I had a MPG option to chose from and the temperature unit is stuck as °C but displays °F on the display (car settings)
Mobi01 said:
I wish I had a MPG option to chose from and the temperature unit is stuck as °C but displays °F on the display (car settings)
Click to expand...
Click to collapse
mam ten sam problem na px5 xtce mx2 v2.27_2
I used to have a separate CAR SETTINGS apk to set the i-cockpit info language of my Peugeot.
Can anyone send me a backup of the car setting apk?
I have lost it when I update the mtcd firmware so now I can't set my peugeot car language and it's in French.
I want to change the language back to English. Many thanks.
canbus apk is only visible when the canbus profile matches your car make n model.
Id try changing the profiles back and forth and see if this fixes it.
Xorit said:
canbus apk is only visible when the canbus profile matches your car make n model.
Id try changing the profiles back and forth and see if this fixes it.
Click to expand...
Click to collapse
I have tried to use Canbus 61 PSI Simple for my peugeot 3008 steering wheel control is working.
The control settings apk showed up but not much I can change in there and also there is no language option in there so I can't change the language to English.
I also tried Canbus 50 for Peugeot 3008 rise but nothing is work so look like not much I can do to change the language unless use the old original radio control but it is too much hassle to take this android unit out and reconnect the original radio. Thanks anyway.
Same problem, have you solved it?
Hi Im planning to replace my factory headunit (no built-in amps , 6 speaker without sub) , if I replace it with this afermarket Daisata HU , will my factory rear and lane watch(right side mirror) camera will work and steering whell control??anyone got their aftermarket HU works with CRV 2015??TIA
I think all will work, because it's always the same Honda Connect system. I'm driving a HRV 2016 with a Dasaita HU. All fine. Take a look at this thread for more infos: https://forum.xda-developers.com/an...nda-hr-dasaita-ha5248-v480-8-android-t3858168
OEM rear cam & lane watch doesn't work (for me) maybe you need to wire something properly (haven't found a good installer who can)
canbus is not 100% working (phone talk button from the steering wheel, imid display (like clock etc.))
Manfred.62 said:
I think all will work, because it's always the same Honda Connect system. I'm driving a HRV 2016 with a Dasaita HU. All fine. Take a look at this thread for more infos: https://forum.xda-developers.com/an...nda-hr-dasaita-ha5248-v480-8-android-t3858168
Click to expand...
Click to collapse
does your car has lane watch camera??Kenwood/Pioneer use MAESTRO Datalink to restore factory controls/camera but too expensive..
HNDXCRV said:
OEM rear cam & lane watch doesn't work (for me) maybe you need to wire something properly (haven't found a good installer who can)
canbus is not 100% working (phone talk button from the steering wheel, imid display (like clock etc.))
Click to expand...
Click to collapse
check honda hrv forums https://www.hrvforum.com/threads/dasaita-8-android-head-unit-upgrade-ha5248-v840-8.39897/ ..maybe you need to change some HU settings, please let me know if you fix camera issues..d
Discussion Starter • #1 • 11 months ago (Edited)
Dasaita (hot-audio.com) HA5248-V840-8
8" Android 8.0 radio upgrade
They advertise this unit as having full stock functionality with both cameras and features. I can happily say that it is exactly what they say it is. I have a lot to say so read carefully if you are considering purchasing this unit. Hopefully I can help.
Brief rundown:
All the cameras work and the unit even retains the MPG and trip mpg history features. The unit also adds some features like graphical door ajar indicators. Plug and play with some configuration through a password protected factory settings menu. (password is 126). Steering wheel buttons work and are programmable. This thing is LEGIT!
Cameras:
With a little configuration they both work just fine. The Lane Assist camera has the distance lines programmed in to it so they display automatically. The reversing camera settings include options to show trajectory as well as a distance ruler too.
To properly route the signal for the Lane Assist camera in a USDM HRV EX I had to do the following:
"GO to Settings >Car >Factory Setting (password 126) >Other >Customer Version >Version 2"
In "Settings >Car >Extra Settings >Reversing Volume >On" or set the reverse volume to the desired attenuation. Otherwise as configured by the factory the audio will cut out when the reverse or Lane Assist cameras are active.
(The "Factory Setting" menu has a lot of other configurable options that are vehicle specific. Password: 126)
Click to expand...
Click to collapse
I dont know about the HRV but as par as I know the CRV has a different canbus. I don't know if this canbus (PAC RP4-HD11) is better than the one the dasaita included.
according to some the rear cam work if you power it with 12v too bad I already installed an aftermarket rear cam before I learned about that trick.
check this https://www.crvownersclub.com/threa...mera-to-an-aftermarket-double-din-unit.37721/
HNDXCRV said:
I dont know about the HRV but as par as I know the CRV has a different canbus. I don't know if this canbus (PAC RP4-HD11) is better than the one the dasaita included.
according to some the rear cam work if you power it with 12v too bad I already installed an aftermarket rear cam before I learned about that trick.
check this https://www.crvownersclub.com/threa...mera-to-an-aftermarket-double-din-unit.37721/
Click to expand...
Click to collapse
I ask daisata support and they told me I need a HRV vezel canbus CB015 to retain my factory cameras..I ordered it yesterday and i'll check if it will work on vezel canbus..
MOD TRANSLATION
"Hello, I'm looking for official firmware for honda CRV navigator
nav model fujitsu ten
I attach the complete model image, mine is left only with the honda logo, it turns on, logo comes out and restarts
Thanks 1000"
*****************************
Buongiorno cerco firmware ufficiale per navigatore honda CRV
modello nav fujitsu ten
allego immagine completa modello,il mio e' rimasto solo con logo honda ,accende esce logo e si riavvia
Grazie 1000
I recently installed a Xtrons PQS90MTVL head unit in a skoda superb. I have a couple of questions on how to get it to work correctly when navigating.
1) It seems that you can set the navigation sounds to be a percentage of the radio volume but cannot set it to play at a given volume regardless. The problem is that the radio seems to be constantly on and there is no way to turn it off. The 'on/off' button simply mutes the radio - and the navigation sounds.
Often I am in an area where I cannot pick up a decent radio signal on the programme I want and just get static. In these situations I want to turn the radio off but still hear navigation sounds. I don't want to listen to loud static just so I can have the nav sounds play at a percentage of that static. Is there a way to turn the radio off but still get navigation sounds? (a workaround I have found is to play a media file instead of the radio and then pause playback. The nav sounds are then still a percentage of the - non existent - playback volume. However this should not be necessary)
2) It also seems that a Internet connection is needed for any navigation. even google maps won't do a search without it as it says I am offline. (is this true?)
I have bought the 4G wifi dongle but have a question about its use. Does the HU connect to the dongle, as far as data is concerned, via the USB socket that comes out of the back of the unit or is that socket simply powering the dongle and the HUI is actually connecting to it over wifi using the dongle as a hotspot? If so then I don't have to use the wired usb socket from the unit (which I suspect is underpowered) and can plug the dongle into an ordinary 2A USB socket that I have in the car, positioning the dongle near the roof for a better signal
Incidentally I did try using Android Auto with my phone using wired connection. That seems sort of OK but is not very reliable. Often when starting the car it hangs at the 'connected' screen, or even at the 'trying to connect' screen, although other times it seems OK
3) There is a small socket on the left hand side of the HU that looks like a slot for a small memory card or a sim card. It is labelled 'GPS'. What is that socket used for? it is not mentioned in the manual as far as I can see. - The manual is generally a bit hand waving though, excitedly telling you what you can do but not how to do it.
(I did try the xtrons forum but not only are the last posts there around January 2022 but there seems to be no way to register for it. Hence posting here)
Is it MTCx post system info including mcu version.
Mtcb is long retired
marchnz said:
Is it MTCx post system info including mcu version.
Mtcb is long retired
Click to expand...
Click to collapse
All I know is the model is Xtrons PQS90MTVL so maybe its MTVL (whatever that is) I'm afraid I don't know what mcu means so cannot offer any version for it. Its possible I have posted this in the wrong section and have rep[osted in 'Android Head-Units'. If that is the right place and this is the wrong place, please can you delete this post