Develop Bugs

[Guide] Re-lock and Un-root **3G & 4G** Xoom

##PLEASE NOTE##
These files are from Motorola's Development site and I take no liability with anything that happens with your device if something goes wrong.
DO NOT ATTEMPT TO FLASH THIS FILE ON ANYTHING BUT THE VERIZON WIRELESS MOTOROLA XOOM Z600 (3G MODEL) OR YOU WILL HAVE A SHINEY PAPER WEIGHT!!!!
Click to expand...
Click to collapse
You're going to need to have the Android SDK installed. You can download it here:
ANDROID SDK - DOWNLOAD
XOOM Firmware Downloads:
[3G|MZ600-HRI66]
[4G|MZ602-HLK75D]
Unzip the files in MZ600_HRI66.zip and move or copy them to the /platform-tools folder in your SDK folder.
Connect your Xoom to your computer. Type:
Code:
adb reboot bootloader
Wait for it to reboot into the bootloader.
Type the following commands, waiting for each to finish before continuing:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
You've now successfully flashed your Xoom back to stock. Now it's time to relock the device. Type
Code:
fastboot oem lock
wait for the menu
then press the volume-down button.
Then press the volume up button.
It'll take a minute or so, then reboot. You're now completely back to stock and ready for the update.

So if you are on Three . One you can use this to revert back to out of the box freshness?

Brenardo said:
So if you are on Three . One you can use this to revert back to out of the box freshness?
Click to expand...
Click to collapse
Yes. That is correct. This will return your XOOM to 100% stock.

word!
I have already been thru the LNX 0x0004 debacle and it was absolutely no fun whatsoever.

well I got a stuck at moto logo for 10 minutes
I am going to try to fastboot oem unlock, reflash images again and fastboot lock to see if I get out of moto logo

second install fix it

jlouang said:
second install fix it
Click to expand...
Click to collapse
So that means that you got it working, correct?
>.>

So the HRI66 is the latest version on the Motorola site? I really need to get a grasp of their version numbers.
EDIT:
Never mind looks like HRI66 is the latest version Thanks anyway.

i was thinking that with the change to the bootloader in the 3.1 update we couldn't use previous versions img's. But I am glad we can return to stock and get this 4G update!

I'm following all those steps directly. Once I type in adb reboot bootloader, it says starting Fastboot protocol support. Once I try to type any other command it says not recognized in adb. Any ideas?

Dead link...

dchurch85 said:
I'm following all those steps directly. Once I type in adb reboot bootloader, it says starting Fastboot protocol support. Once I try to type any other command it says not recognized in adb. Any ideas?
Click to expand...
Click to collapse
Did you extract all of the files in the ZIP into the 'tools' folder? The same one that adb is in.

Could someone help me,
After the rebooting device I got this massage :
Failed to boot LNX 0x0004
Starting RSD mode 2
Then stuck on Motorola logo. I can't enter the recovery mode.
What should I do ?
My Xoom is H.6.1-38-9 International version

CakraMas said:
Could someone help me,
After the rebooting device I got this massage :
Failed to boot LNX 0x0004
Starting RSD mode 2
Then stuck on Motorola logo. I can't enter the recovery mode.
What should I do ?
My Xoom is H.6.1-38-9 International version
Click to expand...
Click to collapse
This is what I was afraid of..... try searching the error you are getting. Not many options on how to fix.

i am curious about the LNX 0x0004 error. I know it comes from trying to relock with non-factory img's but what exactly does that mean? I am curious what actually causes the device to soft brick.

Finally I made it, .
I can enter to bootloader by fastboot method, flash the stock image, then relock my device.

Kinda having the same issue as dchurch... "adb reboot bootloader" reboots Xoom to the "M" logo with "Starting Fastboot protocol support," but I can't continue with nay further commands. My computer no longer recognizes the presence of my Xoom and my Xoom doesn't progress past this screen. I can boot it normally with no problem. I've extracted all of the necessary files into my platform tools folder with adb.. any input?

gatorhater73 said:
Kinda having the same issue as dchurch... "adb reboot bootloader" reboots Xoom to the "M" logo with "Starting Fastboot protocol support," but I can't continue with nay further commands. My computer no longer recognizes the presence of my Xoom and my Xoom doesn't progress past this screen. I can boot it normally with no problem. I've extracted all of the necessary files into my platform tools folder with adb.. any input?
Click to expand...
Click to collapse
You can try manually going into fastboot as well... there are two ways to do this:
No matter what, power off the Xoom. Then, 1) Power on the Xoom and as soon as you see it turn on (within a second or two of the power on), press the Volume Down button, which kicks it into Fastboot. 2) If you miss the 1st couple of seconds and press Volume Down after 3-5 seconds, it will say "Android Recovery." You can then press Volume Down until you get to Fastboot, then press Volume Up.
My guess is that you have a different issue, something to do with your Fastboot image. Not sure if booting the Xoom into the OS and connecting with USB Debugging on will work or not to flash the files, perhaps maybe just the boot.img?

I also believe that when the Xoom says "Starting Fastboot protocol support", it is in fastboot mode and you can send the fastboot commands to the Xoom. If your PC does not show the Xoom as a device in your PC's Device manager, then you will probably need to load new/correct drivers onto your PC.

Did you make sure that adb recognized your device? Adb devices in the camaned prompt
Sent from my Xoom using Tapatalk

[answer] [how to] [CDMA/LTE] How To Re-Flash Factory-Image/Recover from Soft-Brick

How To Re-Flash Stock Image
Assuming you have ADB and everything setup already....
1. I just did this for practice. I did not need to do it –but I wanted to do it successfully before I “needed” to do it. I thought I would expand a little on the process and make it a little more noob friendly.
2. Getting started.
a. Read through the entire set of instructions first.
b. I am not responsible if you BORK your phone. I BORKED mine using someone else’s instructions and tried to write a very detailed step-by-step to help others out– but it is completely possible I have also made some small error in the instructions.
3. This will completely wipe your phone – including the SD partition – so transfer any files you need before you do this.
4. This will not re-lock your bootloader. It will remain unlocked.
5. Syntax (spelling, spaces, periods, dashes, CAPITOL, or lower case) matters. There were some spelling errors and file extensions left off the commands – and that will not work.
6.I used the file…
mysid-icl53f-factory-65895fa8.tgz
…which is 4.0.2 for the cdma/lte galaxy nexus [code name = toro/mysid]. The file is located here...
http://www.google.co...NiI9yTxKdUyW1tA
7. Unzip the file (I used 7.zip to do this).
Then you will have a .tar file…
mysid-icl53f-factory-65895fa8.tar
8. Unzip that file and you should end up with a folder…
mysid-icl53f
Inside that folder you will have five files…
i. bootloader-toro-primekk15.img
ii. flash-all.sh
iii. radio-cdma-toro-i515.ek05.img
iv. radio-toro-i515.ek02.img
v. image-mysid-icl53f.zip
Do not unzip “image-mysid-icl53f.zip”
9. Go ahead and copy and paste all these files to your directory…
/android/platform-tools
(or whatever directory you work from. You do not need the “flash-all.sh” so you do not have to copy it).
10. Open the Command Prompt in the directory where you have placed the necessary files by navigating to the directory, pressing shift, and then right mouse click (normally “C: /android/tools” or C: /android/platform-tools). This will bring up the dialogue box and you can select “open a command window here”.
11. Then enter the command…
adb devices
[…this should return your serial number…]
12. enter the command…
adb reboot-bootloader
[wait for bootloader – you should here 2 alert sounds – not just 1]
13. enter the command…
fastboot flash bootloader bootloader-toro-primekk15.img
14. enter the command…
fastboot reboot-bootloader
[wait]
15. enter the command…
fastboot flash radio radio-toro-i515.ek02.img
16. enter the command…
fastboot reboot-bootloader
[wait]
17. enter the command…
fastboot flash radio-cdma radio-cdma-toro-i515.ek05.img
18. enter the command…
fastboot reboot-bootloader
19. enter the command…
fastboot -w update image-mysid-icl53f.zip
20. So you know, steps 17 (flashing the cdma radio) and step 19 (flashing the update image) took longer than the rest so don't freak out - just be patient. If you did the steps in the proper order after entering the last command your phone should reboot on its own and be completely “fresh”. If you made mistakes (like I did the first time) and flashed the radios out of order (like I did) or did not wait long enough for an “Okay” dialogue (like I did) then when you reboot you will have no signal and no phone number and you will have to go through the process again and do it right (like I did).
Hope this helps someone.
Credit goes to JW at that other site for the fastboot commands. I just added detail for the write up.

Great guide, but what if the serial number doesn't show up?
Thank you for the excellent walkthrough. I am following it, but when I enter "adb devices" at the command prompt I receive "list of devices attached" but no serial number. Also, my Nexus displays: "Fastboot Command Read Error -2147483647". I did a battery pull after getting stuck in a bootloop, and am trying to recover. I can unlock and relock the bootloader, but that is the only command that is working.

Ominous39061 said:
Thank you for the excellent walkthrough. I am following it, but when I enter "adb devices" at the command prompt I receive "list of devices attached" but no serial number. Also, my Nexus displays: "Fastboot Command Read Error -2147483647". I did a battery pull after getting stuck in a bootloop, and am trying to recover. I can unlock and relock the bootloader, but that is the only command that is working.
Click to expand...
Click to collapse
if it does not return a serial number than the phone is not being recognized. I believe that there are 2 different sets of drivers that are needed. Let me look for the link and info.
the fact that it returns "list of devices attached" but no number means that it is not finding your device which means it is probably a driver issue. let me see what I can come up with. But I am no expert at any of this.

Ok - so I just did some testing of my own. I ran into the same problem as you. And I know that I have the drivers installed. So what I did was try and "shut down" any thing that could interfere with with ADB/Fastboot.
Any tethering apps that you may have - PDA NET, Easy Tether, etc, could possibly do this. Also - when you plug your phone in - and the Auto Play options pop up for FTP (File Transfer Protocol) - X out of that.
I initially plugged in my phone. Opened the command prompt in my platform-tools folder. typed in...
adb devices
...and I got the same message as you. I then "turned off" everything that could be causing problems with the process. I unplugged the phone and replugged it in (and closed the dialog box again) and then re-opened the command prompt and entered...
adb devices
...and then I got the proper return message.

thepolishguy said:
Ok - so I just did some testing of my own. I ran into the same problem as you. And I know that I have the drivers installed. So what I did was try and "shut down" any thing that could interfere with with ADB/Fastboot.
Any tethering apps that you may have - PDA NET, Easy Tether, etc, could possibly do this. Also - when you plug your phone in - and the Auto Play options pop up for FTP (File Transfer Protocol) - X out of that.
I initially plugged in my phone. Opened the command prompt in my platform-tools folder. typed in...
adb devices
...and I got the same message as you. I then "turned off" everything that could be causing problems with the process. I unplugged the phone and replugged it in (and closed the dialog box again) and then re-opened the command prompt and entered...
adb devices
...and then I got the proper return message.
Click to expand...
Click to collapse
I got the same problem with mine i dont have anything like pda net installed but nothing i have tried is able to get adb to list my phone

Getting the same issue myself...help!

Thank you so much I'm a total noob with this stuff but your guide was very helpful!

Noev said:
I got the same problem with mine i dont have anything like pda net installed but nothing i have tried is able to get adb to list my phone
Click to expand...
Click to collapse
ChuckTu said:
Getting the same issue myself...help!
Click to expand...
Click to collapse
Ok - so another member posted this...
ADB/Naked Drivers
...and I have heard some people say that it was very helpful. So hopefully this will help you guys to get your devices recognized.
Then there is also this thread and the OP said this...
Code:
On your windows PC. Use the root guide by bman
( [url]http://rootzwiki.com...nlock-and-root/[/url] )
and download the third option for drivers. Extract all
of these tho wherever you have your fast boot
( for me it was c:/users/thatmayh3mguy/) then run
fastboot in the cmd. The adbapi.DLL file will be there
and will make the fast boot work. I didn't have the sdk
installed ( fresh install of win 7 ultimate last week and
don't have it all set up yet) and it worked
thread...
adb help/getting your drivers installed correctly
OK - here is also another method that I found. I have PDA Net installed and I did not have any issues with fastboot. Here are some instructions that say the drivers that PDA Net use are the same drivers that you need for fastboot. So here is a link to the thread and hopefully one of these methods is going to work for you.
Installing PDA Net to solve your fastboot problems

ah ha - just read something else that I should have thought of...
If your phone is already in bootloader - the command...
adb devices
...will not work. so if you are in bootloader you should try the command...
fastboot devices
...instead and see if that returns anything for you.

just wanted to jump back in hear and say i was able to get mine working again. adb was allowing me to lock/unlock the bootloader i toggled that on and off then when i went to boot my phone it took a long time to boot but finally did. Thanks for all the help was in a real jam there for a minute. I used the naked adb drivers posted above not sure if that did anything but it worked for me. Thanks again!

Noev said:
just wanted to jump back in hear and say i was able to get mine working again. adb was allowing me to lock/unlock the bootloader i toggled that on and off then when i went to boot my phone it took a long time to boot but finally did. Thanks for all the help was in a real jam there for a minute. I used the naked adb drivers posted above not sure if that did anything but it worked for me. Thanks again!
Click to expand...
Click to collapse
cool. glad to hear it.

trying this with a Linux OS
So I have a Samsung Galaxy Nexus on Verizon and I put 4.0.4 (IMM30B) using the Galaxy Nexus ToolKit on Windows. Since then I've had a few issues with performance so I want to go back to stock (ICF53F) then maybe goto latest IMM76K (I think). I've retrieved the zip file from steps above and untar'd the file, but when I try to flash the boot file it just sits there waiting for device. I'm not sure what it's waiting for. I'm in fastboot mode and then plugged in the phone to the usb cord but nothing happens.
Any ideas?
UPDATE:
I figured out the issue. On a linux machine using fastboot requires super user privileges. Maybe an update to the instructions may be in order?

CMD keeps telling me waiting for device.
How long will it takes first time?
this after entering: fastboot flash bootloader bootloader-toro-primekk15.img

ladyminnie said:
CMD keeps telling me waiting for device.
How long will it takes first time?
this after entering: fastboot flash bootloader bootloader-toro-primekk15.img
Click to expand...
Click to collapse
Does "fastboot devices" return your device?
If not, you may have a driver issue.
Sent from my Galaxy Nexus using Tapatalk 2

A mistake I made a while ago, if you are sure that you have already installed ADB drivers, and your device still isn't being recognized by ADB..
Be sure USB Debugging is checked on.
Sent from my Galaxy Nexus using Tapatalk 2

adb devices returns my number from the phone
adb reboot-bootloader does bring my phone into bootloader
than it stops with the next command. I waited for 45 minutes/
---------- Post added at 07:03 PM ---------- Previous post was at 06:57 PM ----------
usb debugging was/is still on
The white small led is lightning up every 10 seconds orso

problem solved with:
http://forum.xda-developers.com/showthread.php?t=1766475

fastboot never start after update to android 6

Hy
I had an unlocked bootloader phone. Yesterday I flashed the new Android 6, Europe version from the Huawei blog forum, no beta, on my Huawei GX8. I used the method, dload on SD card, Phone off an the press Volume down+volume up+Power button.The flashing was normaly.
Now the phone starts normaly but I can´t start fastboot. When the phone is off and i press Vol down + Power the phone start the android system and the Huawei logo is coming not the fastboot Modus. I can see my phone and the order under Windows but i can not control my phone with the fastboot command. (example: fastboot device. the answere ist searching devices, but it comes no resolution) I loaded the last version of Fastboot, but the problem is the same.
Please can you help me. What can i do? Many thanks for your help!

Should be connect the charger cable to the phone.
charger or computer
excuse me for bad english

No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.

bertl237 said:
No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.
Click to expand...
Click to collapse
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?

krispin said:
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?
Click to expand...
Click to collapse
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.

bertl237 said:
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.
Click to expand...
Click to collapse
So, you connect your phone, open minimal adb and fastboot too, run "adb devices", you see device id? If yes, run "adb reboot bootloader" . Phone shoult reboot to fastboot mode. Then run "fastboot devices" to see if it is connected properely.

i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?

bertl237 said:
i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?
Click to expand...
Click to collapse
No, you should be able to use adb and fastboot with stock recovery.
After first adb command you shoult approve authorization on your phone.

Here is screenshot from minimal adb...
Phone must be in MTP mode.

And here is phone in fastboot

Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.

bertl237 said:
Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.
Click to expand...
Click to collapse
Just reboot to fastboot and flash surdu-petru version of TWRP recovery 3.0.2 with command "fastboot flash recovery xxxxx.img". And than reboot to recovery and flash supersu zip.

Issue unlocking bootloader

I'm trying to unlock boot loader on my device but, when I reboot into boot loader I don't get an option for "fast boot". The options I do get are to reboot, reboot in download mode, reboot in boot loader, reboot in recovery, and shut down. Any ideas or maybe any precursors I've missed?

fastboot (and adb) needs to be installed and running from your PC, you reboot in to the phones bootloader then from a command prompt or terminal on your pc you issue fastboot commands to your phone which is connected by USB.

No luck
upperdecker said:
fastboot (and adb) needs to be installed and running from your PC, you reboot in to the phones bootloader then from a command prompt or terminal on your pc you issue fastboot commands to your phone which is connected by USB.
Click to expand...
Click to collapse
C:\Users\Delprete>adb reboot downloader
adb server is out of date. killing...
* daemon started successfully *
error: device '(null)' not found
is all I got. I downloaded and installed fastboot to the pc. The directions that I'm following from HTCDEV.com say to reboot into download mode and then load fastboot from the phone.

Use the adb and fastboot from here http://forum.xda-developers.com/showthread.php?t=2317790
Make sure you have usb debugging and oem unlocking enabled in developer options of your phone.
Once in download mode send the fastboot commands from your pc

problem with fastboot twrp flashing

my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.

Nazukii said:
my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.
Click to expand...
Click to collapse
try upgrade your android sdk on your pc

Nazukii said:
my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.
Click to expand...
Click to collapse
Well if you already had adb in your pc, rename the twrp file to recovery, you don't have to move the twrp from download folder, open download folder press shift and right click then select open cmd here, on cmd type "adb device" to see if your device connected, then after that type this "fastboot flash recovery recovery.img" press enter than after that type "fastboot boot recovery.img" TEAMWIN logo should appear on your device and then you can unplug your device. Hope this useful

i am trying to flash twrp there is no folder called adb i have installed the 15 second adb and all so i have got this minimal adb flashboot and i tried with that and got this ---- FAILED (remote: Flashing is not allowed in Lock State). i have granted all usb and oem unlocking. please help with this

Phone shows unlocked during the boot?
I had the same Problem,after a Factory Reset works for me.
I am on Miglobe-Rom Miui10 8.6.28.
Minimal ADB is enough.
Or use this from Attachment.
Unpack with Win.zip and copy Twrp in this Folder.
Conect the Phone with your Pc ,boot into Bootloader and click "cmd-here.exe"
Use this Command
fastboot flash recovery twrp-3.2.1-3-whyred.img

@Nazukii - Quick question - any chance you could try running GameBench on your device, and see if our background service dies when the device is disconnected from the PC? I don't have a Note 5 Pro to test, and I've got some user complaints. Any assistance would be awesome!
J

gamebenchjake said:
@Nazukii - Quick question - any chance you could try running GameBench on your device, and see if our background service dies when the device is disconnected from the PC? I don't have a Note 5 Pro to test, and I've got some user complaints. Any assistance would be awesome!
J
Click to expand...
Click to collapse
Have you fixed your app to run on Magisk-SU ?

otonieru said:
Have you fixed your app to run on Magisk-SU ?
Click to expand...
Click to collapse
Hey Otonieru,
Not yet, but I've got one of the engineers working on it - hopefully it'll be up in the next 30 days or so

Same problem here after updating my gcam was not working was enabling hall again but it is not booting into twrp

Redmi Note 5 pro
So my Bootloader is locked,
My phone stuck in MI recovery idk how.
I cant install MIUI via fastboot. Im stuck ..
Can anyone please help me here not sure how to proceed further.

If you have made sure that you have all the drivers installed and still have not solved, you need to use an Intel-based PC / notebook and use a usb 2.0.

”Well if you already had adb in your pc, rename the twrp file to recovery, you don't have to move the twrp from download folder, open download folder press shift and right click then select open cmd here, on cmd type "adb device" to see if your device connected, then after that type this "fastboot flash recovery recovery.img" press enter than after that type "fastboot boot recovery.img" TEAMWIN logo should appear on your device and then you can unplug your device. Hope this useful”
i did that but it is showing failed（too many links）and "press any key to reboot" showing on my phone's fastboot screen

Fastboot boot recovery.img flashing problem on Redmi note 5 pro
My bootloader is unlocked and my oem as well as usb deb is on. After i connect my phone in fastboot mode to my pc. The cmd shows fastboot devices but when it comes to fastboot boot recovery.img flashing device get disconnected. Plzzzzzz let me know a solution for this. A solution for this will be highly appreciateable.