Related
I am root and I have installed Xposed Framework...
Tks
Jonho77 said:
I am root and I have installed Xposed Framework...
Tks
Click to expand...
Click to collapse
Search for "viper for android" install that and you can boost speaker volume nicely.
You can also modify your mixer_paths.xml file to boost speaker volume but viper is much better.
Thanks for your help, but I can't install viper ?. I'll try the suggested modification.
Jonho77 said:
Thanks for your help, but I can't install viper ?. I'll try the suggested modification.
Click to expand...
Click to collapse
In order to install viper you will have to copy audio.effects.conf from system/vendor/etc to system/etc then vipe will install and work as adverised (provided you also install busybox that is)
For some reason that file is not present in the system/etc folder and it needs to be there as well as system/vendor/etc for the viper installation to work.
Took me some work and help from others to figure that out in a round about way.
Oh and when you copy it make sure you change permissions to match everything else in that folder. You won't regret it, if you have any other problems the guys in the viper main thread are super helpful. or you can ask here and I will be glad to help also.
you can also edit the default_gain.conf files in system/etc
edan1979 said:
you can also edit the default_gain.conf files in system/etc
Click to expand...
Click to collapse
Could anyone tell me which options in the .conf file to edit ?
Why not just install Mxplayer, it automatically allows you to boost the volume, just enable it in the audio settings. imo there is no better player for Android.
Will it boost the volume past the limits set in the default_gain
Also, will it boost the volume of YouTube clips through my headphones ?
( which is what I actually want to do)
woodstok said:
Will it boost the volume past the limits set in the default_gain.conf file ?
Click to expand...
Click to collapse
It will boost up to 200% which i find is plenty loud enough.
Thanks I'll go grab it and check it out
woodstok said:
Thanks I'll go grab it and check it out
Click to expand...
Click to collapse
you also get the added bonus that it re-enables ac3 and dts support if you install this codec http://forum.xda-developers.com/apps/mx-player/mx-player-custom-codec-dts-support-t2156254
S6 Headphone Boost Volume Boost ¸¸♬·¯·♩¸¸♪·¯·♫
Hi , this is mod for S6 Edge Headphone boost, made by stalli0nUK recipe.
U need to flash this under CWM
Flash Guide:
Supported model: Galaxy S6 Edge, G925F/I (could work on other unlocked models too, like T-Mobile one
1- Download TWRP v2 recovery |
2 Rooted Galaxy S6 Edge
3 - Reboot recovery.
4 - Flash S6_Volume_Boost_Headphone.zip
You’ll see TWRP 2.8.6.0 on your Galaxy S6 Edge in all its glory. Enjoy!
That’s it. If you face any issues, i am not responsible )
These is just tested on the S6 EDGE, other variants use with caution.
Feel free to ask anything.
Thanks to : stalli0nUK
UPDATE 3
Twrp2 recovery is out with great install tutorial, so folow that and flash headphone zip.
UPDATE 4
I also add mixerpaths xml in post , and u can copy that to system/etc if u have root, just overwrite old file(just back it up first)... and of course set the right permisions for the file 644
Value is 39 which is very loud
If you wanna change on your own this is what u need to change :
HPOUT1L Input 1 Volume" value="39"
HPOUT1R Input 1 Volume" value="39"
Stock value is 32...
Hope this will help a lot of u guys
Link mixerpaths.xml
http://www55.zippyshare.com/v/dyIXkDuk/file.html
UPDATE 5
I attach V40 loudness TWRP file this is much louder than V37 version for anybody who wants louder.
)
UPDATE 6
I Added V40 + Speekers Loudnes V38 (very Loud) )
Also will try to make in call volume mod also and post it later.
UPDATE 7 (High volume notification)
For me best and easiest way to do this is: plug in your headphones turn the volume to max, go to music app , settings , turn smart volume on and u will get a message that (default volume is now 15 bla bla... ) then go to youtube and test it, and voila no more high volume notification
Br
Can I install the headphone boost .zip file with the CWM Root?
Why have I got to install the TWRP File?
One more question:
Can I just use the mixer_paths.xml file and put it into the etc folder and give it rw-r-r- permissions? (When I have root)
Thank you
lienot
U can do it manualy yeah .
If its easier for u why not. Just fix permissions and thats it.
Sent from my SM-G925F using XDA Free mobile app
Hi
Just to confirm it works. with your procedure
On my s6 edge 64 International
thanks
The link not work for TWRP recovery :crying:
I fix the links, now it should be good
Sent from my SM-G925F using XDA Free mobile app
What change in this file for boost call speaker and hadset for more loud call...
I can check , and let you know or i can make update with versio for call and lodspeeker.
Br
Sent from my SM-G925F using XDA Free mobile app
So i wait thx
I never have had the luck to feel happy about two things on the Android devices I have owned so far: the battery life and the speaker volume output. But why....?:good:
kajkac said:
UPDATE 1
Beacouse TWRP newboot.img image breaks call sound flashback stock boot image after flashing (will bring back white twrp)
but your call sound will work.
STOCK boot.img
http://www44.zippyshare.com/v/sOC4urRm/file.html
UPDATE 2
After a few tests, when you flash back to stock recovery, flash back TWRP S6 EDGE (not zeroltetmo.img) recovery.
twrp-2.8.6.0-zeroflte.img is correct one.
Now you will have working TWRP and call sound without white screen.
Br
Click to expand...
Click to collapse
Just an FYI, I did as above, and ended up with a black screen in recovery after flashing twrp-2.8.6.0-zeroflte.img
I had to flash stock firmware in Odin, which then failed. However a quick flash of CF Auto Root again, and phone booted as normal.
kajkac said:
S6 Headphone Boost Volume Boost ¸¸♬·¯·♩¸¸♪·¯·♫
Hi , this is mod for S6 Edge Headphone boost, made by stalli0nUK recipe.
U need to flash this under CWM
Flash Guide:
Supported model: Galaxy S6 Edge, G925F/I (could work on other unlocked models too, like T-Mobile one
1- Download TWRP v2 recovery |
2 Rooted Galaxy S6 Edge
3 - Reboot recovery.
4 - Flash S6_Volume_Boost_Headphone.zip
You’ll see TWRP 2.8.6.0 on your Galaxy S6 Edge in all its glory. Enjoy!
That’s it. If you face any issues, i am not responsible )
These is just tested on the S6 EDGE, other variants use with caution.
Feel free to ask anything.
Thanks to : stalli0nUK
UPDATE 3
Twrp2 recovery is out with great install tutorial, so folow that and flash headphone zip.
Br
Click to expand...
Click to collapse
First of all, thank you for the good job.
Tested and working
But i do have a question.....
Can we go a little LOUDER?? If so, can you upload a modded file or tell me how to change yours so i can go just a little bit louder?
Thank you again.
I would also love a bigger headphones boost. Thanks in advance, this mod is super useful for me
Drumm3r said:
First of all, thank you for the good job.
Tested and working
But i do have a question.....
Can we go a little LOUDER?? If so, can you upload a modded file or tell me how to change yours so i can go just a little bit louder?
Thank you again.
Click to expand...
Click to collapse
Line 2500/2501:
Code:
<ctl name="HPOUT1L Input 1 Volume" value="32" />
<ctl name="HPOUT1R Input 1 Volume" value="32" />
Current modification changes the 32 to 37. It's pretty darn loud for me and I might reduce it .
You can consider changing it to your liking and copy the xml into \system\etc. But honestly, I'm not sure how large this value is allowed.
Thanks kajkac for the mod!
More people might consider copying the XML instead of TWRP since PingPong root is becoming widespread :good:
Yes xml copy is also fine, i tested with 37 and is loud for me, but with value of 39 or 40 sound became cracling especialy vith viper sound but is damm loud, i will atach xml file in post also.
Br
Sent from my SM-G925F
headset volume upgrade and s6 edge is dead.
I am downloading now from sammobile the newest 5.02 and lets see how it will go. My phone is not turning on at all i just can see samsung in white on screen...
I never experienced this problem during mediapath.xml issue. after you replce this file you always haveto reboot the phone to test the headset volume but it is f..cked now.
Anyway guys be carefull or just be happy with volume level 37, dont try 38 like me...
Thank you
Changed it to 40. Thats enough.
---------- Post added at 01:19 AM ---------- Previous post was at 01:15 AM ----------
40 is great for me.
My beats can haldle it
kalafat said:
I am downloading now from sammobile the newest 5.02 and lets see how it will go. My phone is not turning on at all i just can see samsung in white on screen...
I never experienced this problem during mediapath.xml issue. after you replce this file you always haveto reboot the phone to test the headset volume but it is f..cked now.
Anyway guys be carefull or just be happy with volume level 37, dont try 38 like me...
Click to expand...
Click to collapse
You sure your problem is because of the volume value?
I'm thinking the permissions of the file we're right..
Drumm3r said:
Thank you
Changed it to 40. Thats enough.
---------- Post added at 01:19 AM ---------- Previous post was at 01:15 AM ----------
40 is great for me.
My beats can haldle it
Click to expand...
Click to collapse
Dont blow your ears out ))
Sent from my SM-G925F using XDA Free mobile app
Pls
I have the s6 edge+ and my wife has the note 5, can't get Viper to work just like everybody else. Other phone's versions of OS use mixer_paths.xml to adjust volume/levels, but these 2 phones have a separate file titled mixer_gains.xml where volume levels can easily be adjusted. Is this separate new file the reason why Viper won't work?
Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse
ElDuez said:
Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse
IT WORKED!!! AND IT KICKS ASS!! THANK YOU ElDuez and Mr. Junky! My ears rejoice!
Click to expand...
Click to collapse
I managed to install it, but I'm not hearing any difference... am I missing any steps in between?
mau921 said:
I managed to install it, but I'm not hearing any difference... am I missing any steps in between?
Click to expand...
Click to collapse
and false alarm! turns out it was just the Music apk I was using! all good now!
INTRODUCING DUAL AUDIO MOD FOR TULIP (REDMI NOTE 6 PRO)
What does it do(currently)?
This mod actually enables the earpiece speaker also along with the bottom-firing speakers. So you have a dual speaker config like the HTC10 has where the purpose of the speakers are same. The loudspeaker is untouched but the earpiece behaves like a mid-range booster and adds some more detail for the speaker audio output.
This mod will works on Any Rom (Stock and Custom) {Root Required}
Installation
1. Download " mixer_paths.xml " file from attachments below.
2. Move above downloaded file to " vendor > etc "
3. Rename the exists file to mixer_paths.bk so you can turn this MOD off when required.
NOTE: USE THIS MOD AT YOUR OWN RISK, USING THIS MOD AT HIGHER VOLUME LEVELS MAY DAMAGE YOUR EARPIECE SPEAKER.
Enjoy!
Neat, but do we need to move the file with TWRP? I've been trying to do it with FX, but it won't allow me to modify the file because I guess Magisk is controlling /vendor.
Joomsy said:
Neat, but do we need to move the file with TWRP? I've been trying to do it with FX, but it won't allow me to modify the file because I guess Magisk is controlling /vendor.
Click to expand...
Click to collapse
Try to move it using Root explorer pro or solid file explorer. Don't forget to backup original file first.
Well, I tried with a terminal, but for whatever reason the partition won't mount as RW. It persists as RO, which I imagine is Magisk's fault like I said. I'm gonna try with TWRP and report back.
Incoming call voice not coming .
Sent from my Phh-Treble vanilla using Tapatalk
I use it, but lost sounds on my Redmi Note 6 pro, I had to perform a rollback to the previous Backup.
Best Regards
Not working 10.2.2
IMHO this stereo mod works fine but i have no incoming voice call.
Does this mod works perfect for anyone?
not working....miui9
WhatzIt2Ya said:
I'll create a new one by magisk. If you want the mod. Give me the following file by uploading to gdrive : system/vendor/etc/mixer_paths_mtp.xml
Click to expand...
Click to collapse
Ty Very much
https://drive.google.com/file/d/1x-e9bNuh22a2uLSrrt5H4-sHZuddKeUj/view?usp=drivesdk
WhatzIt2Ya said:
Whoops, wrong file. My bad. I need mixer_paths.xml
Click to expand...
Click to collapse
https://drive.google.com/file/d/1OYUCyS1GKEI5HzsrIo3yuRj1gzBkiPPL/view?usp=drivesdk
Jt380p said:
Whoops, wrong file. My bad. I need mixer_paths.xml
Click to expand...
Click to collapse
Hi guys, I have finally rectified each and every issues with this mod and happy to announce that, New update is coming very soon. Be ready guys. Thank you all for giving me your valuable feedbacks on this mod.
İm ready for this but u can send me first new beta updates(first tests) [email protected]
Im waiting with new updates to install fiest time bro good lucky
Is this mod working perfectly
Shivamk845 said:
Hi guys, I have finally rectified each and every issues with this mod and happy to announce that, New update is coming very soon. Be ready guys. Thank you all for giving me your valuable feedbacks on this mod.
Click to expand...
Click to collapse
We are waiting patiently
Shivamk845 said:
Hi guys, I have finally rectified each and every issues with this mod and happy to announce that, New update is coming very soon. Be ready guys. Thank you all for giving me your valuable feedbacks on this mod.
Click to expand...
Click to collapse
We are waiting patiently
thxxx
When I try to modify the mixer_paths_tavil.xml file, I find that I can't understand the statement definition. I can't find the statement comment about the content of the lg mixer_paths_tavil.xml file through the search engine. Can anyone help me. Thank you very much
Yiheng© said:
When I try to modify the mixer_paths_tavil.xml file, I find that I can't understand the statement definition. I can't find the statement comment about the content of the lg mixer_paths_tavil.xml file through the search engine. Can anyone help me. Thank you very much
Click to expand...
Click to collapse
This should help you : Download
Regards,
acervenky
acervenky said:
This should help you : Download
Regards,
acervenky
Click to expand...
Click to collapse
Hello, can you maybe link an installation guide, or could you write me a quick one?
I would really like to install this mod but I don't know how.
Thanks in advance.
kiszidomi said:
Hello, can you maybe link an installation guide, or could you write me a quick one?
I would really like to install this mod but I don't know how.
Thanks in advance.
Click to expand...
Click to collapse
Just install it as a magisk module. That worked flawlessly for me.
philipnzw said:
Just install it as a magisk module. That worked flawlessly for me.
Click to expand...
Click to collapse
What does it do exactly?
and I can't I find it in the Download section in the Magisk Manager, dunno why
kadyt said:
What does it do exactly?
and I can't I find it in the Download section in the Magisk Manager, dunno why
Click to expand...
Click to collapse
It enables your earpiece speaker as a secondary speaker, makes music and videos much more enjoyable.
No you can't find it in magisk manager downloads, just download the zip, and flash it under the modules section.
philipnzw said:
It enables your earpiece speaker as a secondary speaker, makes music and videos much more enjoyable.
No you can't find it in magisk manager downloads, just download the zip, and flash it under the modules section.
Click to expand...
Click to collapse
I have installed it and it seems not to work, it don't notice any sounds from the earpiece speaker. Do I need to configure anything after installing? I'm on Pie
kadyt said:
I have installed it and it seems not to work, it don't notice any sounds from the earpiece speaker. Do I need to configure anything after installing? I'm on Pie
Click to expand...
Click to collapse
Can you send me a link ? cant find it....
Thanks
mattesw... said:
Can you send me a link ? cant find it....
Thanks
Click to expand...
Click to collapse
It is in this post above:
acervenky said:
This should help you : Download
Regards,
acervenky
Click to expand...
Click to collapse
But as I said, at least in my case, it does nothing
philipnzw said:
Just install it as a magisk module. That worked flawlessly for me.
Click to expand...
Click to collapse
I have taken a look at this module. If my understanding is correct, it tries to replace the default mixer_paths_tavil.xml with another xml file with the modifications that, I guess, should enable the dual speaker feature
I have checked that the reason why it does not work for me, is that after installing the module by means of Magisk Manager and the reboot, the mixer_paths_tavil.xml file is still the original. It has not been replaced by the one contained in the module
However, the path is well defined inside the module (mixer_paths_tavil.xml is contained in folder system/vendor/etc)
Actually, I'm experiencing a similar problem trying to modify directly the mixer_paths_tavil.xml, as described here https://forum.xda-developers.com/lg-g7-thinq/themes/changes-to-mixerpathstavil-xml-lost-t4035345
This is happening to me on Pie
So I wanted to ask you, which Android version are you running that it works for you? are you on Pie?
Thanks
Works for me on Oreo, along with Ainur Sauron, Audio modification library, Audio compatibility patch, Viper 2.7.1. Also, there's a working Dolby Atmos downloadable through Aptoide.... doesn't even need root, just a quick apk install. Make sure you're covering the bottom speaker completely and put your ear to the top speaker. It's not going to be mind blowing regarding volume. It's likely because there's no way to turn the values high enough to complete with the bottom speaker without doing damage.