Hello, i came from philippines and this is my device j610g/ds (J6+)
i noticed that i cannot flash back in oreo since i have patched the pie and this is november update in download mode
the message i got in download mode :
SWREV Check fail Fused 4> Binary 1
Current Pie Firmware Version J610GUBU4BSK3 (November 2019 Update)
can you help to find where firmware i can rollback to oreo? (i think that is pie firmware too, but my internet was so poor and it takes hours to download one file)
could you please help me?
this is DOWNLOAD MODE swrev :
RP SWREV: S1, T1, R1, A4, P1
RP SWREV: K 4, S 4
it will help a lot to me and the other who wants to rollback at oreo :good:
kapmino269 said:
I knew .
wait until Samsung release source .
I requested for kernel source .
Click to expand...
Click to collapse
Yes! Thanks a lot sir! ?
hello , im from INDONESIA ,my device is SAMSUNG J6+ J610F, with PDA J610FXXU5BTB1. android Pie.
After update my touchscreen not working.
the Download mode say : SW REV Check fail Fused 5 > Binary 4..
Please help me ..
---------- Post added at 05:08 AM ---------- Previous post was at 05:07 AM ----------
kapmino269 said:
dude , thanks god no need to kernel source ..
topjohnwu could make something for root (disable defex without need to do this from source )
use magisk v20.2 .... and u can root .
Click to expand...
Click to collapse
hello , im from INDONESIA ,my device is SAMSUNG J6+ J610F, with PDA J610FXXU5BTB1. android Pie.
After update my touchscreen not working.
the Download mode say : SW REV Check fail Fused 5 > Binary 4..
Please help me ..
Related
Hi, my Samsung S9 (SM-G960F, dual SIM) was purchased in May 2018 from Dubai (fully unlocked) and is being used in India. There were no carrier restrictions at the time of purchase, it was purchased fully unlocked.
Even today, it still shows Android Security Patch Level at 1/April/2018. I have enrolled into Samsung Pie beta, and I try everyday to download software manually, but no update has come, either in security patch or in software version. The details are given below:
When I try to update software manually by going to software update - download updates manually, it says 'The latest updates have already been installed. Current version : G960FXXU1ARD4/G960FOXM1ARCA/G960FXXU1ARD6'
When I go to settings - software information, the android version is 8.0.0, samsung experience version is 9.0, baseband version is G960FXXU1ARD6, build number : R16NW.G960FXXU1ARD4, kernel version : 4.9.59-13138374-QB17882910 [email protected] #1 Tue Apr 24 11:50:17 KST2018, android security patch level : 1 April 2018
I have even downloaded Samsung Smart Switch and tried downloading latest software but no use. The message I get there is 'Your software is up to date : RD4(INS)'
Please help. At this rate, I am not sure if I will receive any updates at all, even security patches. I dont know what is the problem.
Thanks in advance.
Flash it manually with ODIN, loads of guides all over XDA if you look
Thanks a a lot.
*Detection* said:
Flash it manually with ODIN, loads of guides all over XDA if you look
Click to expand...
Click to collapse
Thanks.
I have downloaded Odin v 3.13.1. I have downloaded the Android Pie firmware available in Sammobile applicable in UAE and the firmware is G960FXXU2CRLI/G960FOXM2CRLI.
Can I directly update my firmware from G960FXXU1ARD4/G960FOXM1ARCA using Odin 3.13.1 to G960FXXU2CRLI/G960FOXM2CRLI. Please advise.
Thanks.
Kssomu said:
Thanks.
I have downloaded Odin v 3.13.1. I have downloaded the Android Pie firmware available in Sammobile applicable in UAE and the firmware is G960FXXU2CRLI/G960FOXM2CRLI.
Can I directly update my firmware from G960FXXU1ARD4/G960FOXM1ARCA using Odin 3.13.1 to G960FXXU2CRLI/G960FOXM2CRLI. Please advise.
Thanks.
Click to expand...
Click to collapse
Yea, just flash as normal, your bootloader will change to version 2 so you will not be able to downgrade back to that current firmware you are running as it is version 1
*Detection* said:
Yea, just flash as normal, your bootloader will change to version 2 so you will not be able to downgrade back to that current firmware you are running as it is version 1
Click to expand...
Click to collapse
Thanks a lot for the prompt response. I would attempt to directly flash to this version in one step tonight.
Thanks once again.
This is happening to me too...
I have an s9 plus bought from Dubai full unlocked...bt still stuck on December 2018 patch where as other s9 plus recieving April 2019 patch..I'm worried about this..my build number is SM965FXXU2CRLI
I have currently the android firmware 8 installed.. I flashed it via odin..
the package name is:
A320FLXXS4CSG5_A320FLATO4CSF1_ATO
the string in the recovery menu is:
A320FLXXS4CSG5
so I think the device is on security patch level 4 ?
the only combination firmware I can find for A320FL is binary 3 and then following error pops on the display:
device: 4 binary: 3... so I guess its the wrong version...
But I can not find an Combination Binary 4 for A320FL !! Is it just hard to find or does it even exist?
I tried the version for A320F but its not working
Do you guys have solution for this or maybe even an download link?
I have updated my Galaxy S9 to latest Security Patch manually with Odin.
now Z3x Patch Certificate is not working. Cause Binary has upgraded from 8 to 9 in recent Monthly update.
Security Patch level is 1st May 2020.
Need working Solution?
sahir1993 said:
I have updated my Galaxy S9 to latest Security Patch manually with Odin.
now Z3x Patch Certificate is not working. Cause Binary has upgraded from 8 to 9 in recent Monthly update.
Security Patch level is 1st May 2020.
Need working Solution?
Click to expand...
Click to collapse
This is not the proper section of the threads to post this. You should actually ask in the zx3 sites. Not here
TheMadScientist said:
This is not the proper section of the threads to post this. You should actually ask in the zx3 sites. Not here
Click to expand...
Click to collapse
Yeah but isn't a developer site. Someone may have a solution.
This happened with me on my s9+.
If you can flash a twrp on the phone, just look for a Android 8 or 9 light weight custom os for your model and flash it through recovery.
Then try the patch certificate(repair network) option with any samsung box.
Use chimera for patch cert ..
humza14 said:
Use chimera for patch cert ..
Click to expand...
Click to collapse
Tried but its not working, even tried paid solution.
it does work on other devices which are on Binary 8, but not on binary 9.
Faruq Umar said:
This happened with me on my s9+.
If you can flash a twrp on the phone, just look for a Android 8 or 9 light weight custom os for your model and flash it through recovery.
Then try the patch certificate(repair network) option with any samsung box.
Click to expand...
Click to collapse
Yeah, Tried but it did not worked.
thanks.
also talked to a professional on the method he said not possible.
Even with my bootloader unlocked, I'm unable to flash the boot.img patched by Magisk. It fails with ERROR "Only offical releases are allowed to be flashed(BOOT)"
Your KnoxGuard status is "Prenormal". Try this guide and see if you can get rid of it.
This could be "Running Gag" from Samsung...
I have expirienced this with my SM-A202F Exynos...
Solution was to use other Firmware...
Few days ago I saw this...
Can't get SM-A505FN to install TWRP / SHARP Recovery
Steps I've done: 1. Unlocked bootloader, OEM unlock is enabled 2. Downloaded and installed Samsung Drivers 3. Download TWRP / SHARP Recovery 4. Downloaded Odin 5. Got my phone into Download mode (KG State - Checking, FRP - off, OEM LOCK - off) 6...
forum.xda-developers.com
NOT in direction to latest...
Try older Firmware(s) inside your Bootloader Version... 6
Only idea...
Best Regards
Samsung Galaxy A51 Firmware Download SM-A515F Free Download
Samsung Galaxy A51 Firmware Download SM-A515F Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
If this is latest... and this is Version on your device:
Code:
A515FXXU6HWC7/A515FOXM6HWC6/A515FXXU6HWC6
Then try older U6 Firmware... in theory you need only sboot.bin Bootloader... but...
A515FXXU6
Uups... try to find other U6 Firmware... if exists...
Best Regards
It worked, thanks a lot!
RGB__Toaster said:
It worked, thanks a lot!
Click to expand...
Click to collapse
Hello, I also have U6 binary. Can you please share the link from where you found the old library.
{Mod edit: Quotation fixed. Oswald Boelcke, Senior Moderator}
Hi, I tried to Root Realme GT master RUI-4.0 Android-13, RMX3360 (IN variant)..
Info--
1. Started with deeptest.apk, but I never got a success message on my application.
2. Downgraded UI-4.0 to 3.0 and deeptest.apk again didn't work (prolly im missing something).
3. Saw a thread on XDA forums where a guy was able to root on UI-2.0 and Android Version- 11 , I think ROM version is A09.
4. Tried to install A09 but got stuck on bootloop.. Though i downloaded official ROM from realme's website to rollback to Android 11.
5. Had to go to service center and they installed UI-3.0, Android-12, Version - C13..
Question--
1. How can I root UI-3.0, Android-12, Version - C13 , RMX3360 (IN variant) ?
Rohan398 said:
Hi, I tried to Root Realme GT master RUI-4.0 Android-13, RMX3360 (IN variant)..
Info--
1. Started with deeptest.apk, but I never got a success message on my application.
2. Downgraded UI-4.0 to 3.0 and deeptest.apk again didn't work (prolly im missing something).
3. Saw a thread on XDA forums where a guy was able to root on UI-2.0 and Android Version- 11 , I think ROM version is A09.
4. Tried to install A09 but got stuck on bootloop.. Though i downloaded official ROM from realme's website to rollback to Android 11.
5. Had to go to service center and they installed UI-3.0, Android-12, Version - C13..
Question--
1. How can I root UI-3.0, Android-12, Version - C13 , RMX3360 (IN variant) ?
Click to expand...
Click to collapse
I don't think it's possible to unlock the bootloader on the Indian version.
Rohan398 said:
Hi, I tried to Root Realme GT master RUI-4.0 Android-13, RMX3360 (IN variant)..
Info--
1. Started with deeptest.apk, but I never got a success message on my application.
2. Downgraded UI-4.0 to 3.0 and deeptest.apk again didn't work (prolly im missing something).
3. Saw a thread on XDA forums where a guy was able to root on UI-2.0 and Android Version- 11 , I think ROM version is A09.
4. Tried to install A09 but got stuck on bootloop.. Though i downloaded official ROM from realme's website to rollback to Android 11.
5. Had to go to service center and they installed UI-3.0, Android-12, Version - C13..
Question--
1. How can I root UI-3.0, Android-12, Version - C13 , RMX3360 (IN variant) ?
Click to expand...
Click to collapse
Try to wait a little longer, currently it is not possible to unlock the bootloader.
Spoiler: Source
realme Community
Welcome to realme Community, your virtual playground to learn the latest tech news, win exclusive prizes, or simply chat about realme!
c.realme.com