I bought the ethernet usb adapter and a m-usb to usb-a female and the usb ethernet lights up and the phone says usb device connected. I don't know where to find the ethernet option...
How do you get the usb ethernet adapter to work? it lights up when i plug it into my micro usb to standard usb female adapter but I don't see an ethernet function or anything...
Title says it all, has anyone tried this?
From what I've read (and the other threads on this topic) - no it can't be done.
It can't be done my friend
I got it to work
psycho1200 said:
It can't be done my friend
Click to expand...
Click to collapse
I used the following and plugged into my TV usb port and had ethernet (verfied with WIFI shut off) and it was charging.
USB 2.0 Ethernet adapter - <amazon.com/gp/product/B003VSTDFG>
OTG with power - <amazon.com/gp/product/B00C452XFO/>
Yup, this now works great for me too! :good:
I bought the Ethernet adapter Nvidia Recommends (same as browncoatdave's)
http://www.amazon.com/Plugable-Gigabit-Ethernet-Chromebook-Specific/dp/B003VSTDFG
And just whatever Y cable could find that didn't look uber cheap.
http://smile.amazon.com/gp/product/B00CXAC1ZW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
What I have plugged into the shield
jjprichards said:
Title says it all, has anyone tried this?
Click to expand...
Click to collapse
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
trackball mouse, why? gives me flashbacks of the 90s...
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
Did you plug all the devices in a particular order? I noticed that if I plug in my charger AFTER I plug in the OTG cable into the shield, then it is not charging. But when I plug in the charger into the OTG cable and then plug it into shield, it is charging.
Is your hub powered? What exact model is it? I am asking because I have very similar setup to yours but the shield does not detect USB devices connected to the hub - it's this one: http: // esperanza . pl/esperanza-usb-2-0-hub-4-porty-ea116,182,437.html
I can connect one usb device directly to OTG cable and it works, but when I connect a hub, it no longer works.
There is a cheap way to do this if you have the soldering skills, and are willing to try it.
Get a cheap USB "Travel" hub.
Open it up, and replace the Upstream USB cable with an OTG cable (A scrap Micro-USB cable may or may not work. The connector must be Properly wired for OTG).
Remove the main power diode in the USB hub, and solder jumper the 2 pads where it was. A Multimeter in continuity mode can help you find the right component, but it takes some experience. There usually is not much in a cheap travel hub, so I can usually find them just by looking, but like I say, only try this if you have the experience, and you know what you are looking for.
Power the hub through it's 5V power jack (if it has one), or you can add a power only micro-USB socket. (Only connect the (+) and (-) power pins, do not connect the data lines. Connect it to any one of the Full size USB port's power pins. Observe polarity.)
Voila! You now have 4 Full size USB ports, it will charge your device, and provide power (Up to the rated power of the AC adapter) for your USB devices.
I did this years ago in the Nokia 770 days. It was one of the first consumer devices that supported USB OTG. Article still exists here:
http://www.linuxslate.org/N770DockingStation.html (Scroll down to the "Electronic Components" Section)
Would this work?
Would this: SODIAL(R) Micro USB Host OTG Cable with Micro USB Power plus this: Anker® Unibody 3-Port USB 3.0 and Ethernet Hub
Give me the ability to charge tablet, use Ethernet and additionally connect USB mouse and keyboard, and possibly charge Nvidia Game Controller?
Or would it just be a waste of time and money
i like to use my nexus 5/7 to connect to my computer at home through VNC but it draws up quite a bit of power. Is it possible to have a OTG cable that'll connect to the MicroUSB port of the phone and then two cables come out, one that has female MicroUSB port to charge the phone, and a second cable that's a female USB port so I can connect a USB mouse to?
Thanks
tracerit said:
i like to use my nexus 5/7 to connect to my computer at home through VNC but it draws up quite a bit of power. Is it possible to have a OTG cable that'll connect to the MicroUSB port of the phone and then two cables come out, one that has female MicroUSB port to charge the phone, and a second cable that's a female USB port so I can connect a USB mouse to?
Thanks
Click to expand...
Click to collapse
I have not tried this myself but read on other devices that OTG Y cables will do what your asking.
http://www.amazon.com/Micro-Cable-Power-Nexus-Galaxy/dp/B00CXAC1ZW
Be warned that sometimes the specific device will not support concurrent charging. The cable link above specifically mentions the Nexus 7. Read the reviews.
Sent from my Nexus 10 using XDA Premium HD app
I have that cable, it does charge the phone but stick doesn't get mounted. I haven't tried to make it work or anything because I don't use it.
Hi, I would have a cable otg microusb - usb, to use it with my nexus 5x I took a microusb adapter - usb c but does not work, the phone does not detect any device. And 'possible to use totally abandons solution or should I take a special cable?
rederik79 said:
Hi, I would have a cable otg microusb - usb, to use it with my nexus 5x I took a microusb adapter - usb c but does not work, the phone does not detect any device. And 'possible to use totally abandons solution or should I take a special cable?
Click to expand...
Click to collapse
My adapter didn't work either. I bought a special cable, which works.
Buy a USB Type-C to USB-A female adapter, those microUSB to USB Type-C doesn't work with OTG.