I'm trying to install Bliss os in an old PC with a nvidia sata but it doesnt detect my hard drives(2 sata HDD), it works very well in an USB drive in live mode. I installed it in a notebook, make a copy with dd in manjaro and copy it in the nvidia sata pc but it stuck in "Detecting Android x86...". So my conclusion is that the module "SATA_NV" is not included in the original kernel, there is a kernel that include it?
Related
i know that is old drivers, but my rom need superruu to flash it.
now, superruu only can support this version of drives.
and i have Microsoft USB Sync Ver.4.0.4232.0 for x86, drives date is 2004/10/6, i can flash my rom on 32bit windows...
but i want to use the 64bit system....
so, i need Microsoft USB Sync 4.0.4232.0 for x64...can anyone share it?
up up up.....
up up up.....
hi
i have buy lenovo ethernet adapter for my surface rt, but i connot found arm drivers
thinkpad usb 3.0 ehernet adapter
is it possible work whit my surface??
If you plug it in and it doesn't work automatically, then probably not.
I don't know if you're running RT 8.0 or 8.1. On 8.0 there was exactly 1 driver available for worked with USB adapters that used the AX88772 chip, but I'm fairly sure they are USB 2.0. This driver was NOT included with the OS.
With 8.1 I believe there are two drivers that shipped with the OS, but I recall reading that they don't automatically install when a USB Ethernet adapter is plugged in, so you might try running the add new hardware wizard and select the driver manually. I still suspect these drivers are for USB 2.0 but I'm not sure. Perhaps you'll get lucky...
Try install this driver. Only for Win8.0.
Hello everyone!
I have got a Galaxy S4 Mini (I9192) and I try to connect my PS4 controller to it, in order to use PS4 modded remote control app, but the phone does not recognise it. I use CM13 latest build by @csendre , custom kernel by @DarkFrenzy and TWRP 3.0.2-1 by @ne0zone75 as well, but I cannot control the phone through my controller. Inside TWRP, in mount option, I cannot enable USB OTG, and using OTG Troubleshooter app, it has crosses on two last lines (not recognized by Linux and not recognised by Android). I have also connected USB flash drive without any luck... So, is there any way to use USB OTG or is it a hardware limitation of the phone?
Thank you a lot!
bobo1704 said:
Hello everyone!
I have got a Galaxy S4 Mini (I9192) and I try to connect my PS4 controller to it, in order to use PS4 modded remote control app, but the phone does not recognise it. I use CM13 latest build by @csendre , custom kernel by @DarkFrenzy and TWRP 3.0.2-1 by @ne0zone75 as well, but I cannot control the phone through my controller. Inside TWRP, in mount option, I cannot enable USB OTG, and using OTG Troubleshooter app, it has crosses on two last lines (not recognized by Linux and not recognised by Android). I have also connected USB flash drive without any luck... So, is there any way to use USB OTG or is it a hardware limitation of the phone?
Thank you a lot!
Click to expand...
Click to collapse
I did not use a controller with the S4 mini, however I used USB OTG functions with no issues, but you need to supply power so use a Y cable. Our hardware can not supply power through the USB port
Hi,
Tablet: RK 3126
Manufacturer: Rockchip Fuzhou
Tablet OS: Android 4.4
Laptop OS: Win 10 x64
Problem: Not able to install drivers/ successfully connect the tablet to my laptop.
The tablet doesn't have a normal micro USB port, instead it has a 5 pin connector. Something like this. I cut a USB cord in half and managed to connect the tablet to the laptop. Now device manager shows "Unknown USB Device (Device Descriptor Request Failed)" which as I understand is supposed to happen with Rockchip tablets. Now, I cannot get further to this. I downloaded Rockchip driver assistant v4.3 and tried all variants of x64, x32 and win8, win7, vista, xp but nothing seems to work.
Please help if you have ever worked with Rockchip devices with Windows 10.
Thanks.
Turns out the USB cable was defective. What are the odds of that! Works great now
Hi
My config is ASUS E45M1-i Deluxe Motherboard with an integrated AMD E-450 processor and an ATI Radeon Hd 6320 graphic card. It is connected to a TV only with a HDMI cable and this config is running very well with W10, Ubuntu 64 and Openelec.
I am trying to install Remix on it, but it doesn't work.
The installation of Remix OS through the USB pen created with the supplied utility is not working (/initrd.img not found error). The usb seems ok as there are the 3 created partitions with all the files in.
If I copy the files from the iso into my hdd partition and create the entry in Grub, the 32 bits version start launching. But it stops and gives the error that the driver for family 20 product 2 is not supported.
The 64bits version doesn’t boot at all (black screen with a small cursor stacked on the top left side).
Any advice?
Is there an iso suitable for my config?
Thank you
seb_131 said:
Hi
My config is ASUS E45M1-i Deluxe Motherboard with an integrated AMD E-450 processor and an ATI Radeon Hd 6320 graphic card. It is connected to a TV only with a HDMI cable and this config is running very well with W10, Ubuntu 64 and Openelec.
I am trying to install Remix on it, but it doesn't work.
The installation of Remix OS through the USB pen created with the supplied utility is not working (/initrd.img not found error). The usb seems ok as there are the 3 created partitions with all the files in.
If I copy the files from the iso into my hdd partition and create the entry in Grub, the 32 bits version start launching. But it stops and gives the error that the driver for family 20 product 2 is not supported.
The 64bits version doesn’t boot at all (black screen with a small cursor stacked on the top left side).
Any advice?
Is there an iso suitable for my config?
Thank you
Click to expand...
Click to collapse
I have similar spec acer revo rl70 and have installed 32bit on separate partition, no sound or video via hdmi but you view video plays without sound.
same problem here!