Hi All,
I have a Canadian T989D from Koodo mobile which I unlocked using unlock code. I took it abroad to Pakistan and after using for 6 months, one day all of a sudden I got NO SERVICE.
Trying to manually select networks, I come across different networks available but clicking on any one of them results in NETWORK REGISTERED sign but still doesn't connect to any network. When I go into the APN settings, I can see different APN settings for the respective sim cards that I put in. E.g. If I put UFONE sim card in, I can see APN settings for UFONE SERVICE PROVIDER.
Here is the twist though. I came back to Canada yesterday and when I put any Canadian Sim in it (FIDO/VIRGIN), it connects to the network without any problems.
Next, I tried T-Mobile sim in the phone. At first few attempts I would receive NO SERVICE/EMERGENCY CALLS ONLY messages. However, just recently I was able to connect to the network by repeatedly changing sim cards and restarting the phone.
So the specific questions to all of you is that "Why can't I connect to ANY network in PAKISTAN when I can see the APN settings for each sim card I put in?" Is there something I can do to fix the issue? I have a running sim card from PAKISTAN with me which I had previously used to connect to the network. Please help/guide me.
Any response will be greatly appreciated.
As the title states, I decided to fork out 20$ on an unlock code for my SGH-T999L. The unlock went smoothly, but I can't connect to any networks for some reason, whether I use my inactive AT&T SIM or my active MetroPCS SIM.
When I set my phone to auto-select the network, it tells me that my SIM doesn't support the network it picks. When I search for networks, I get T-Mobile, AT&T and "311660" on both SIM cards, which neither of them will connect to. I'm sure it has nothing to do with APN settings, as those are solely for MMS and Data if I recall correctly.
Any ideas?
Were you using it with metro before the unlock?
Sent from my SGH-M919 using Tapatalk
Hello all. I purchased a edge+ today but whenever I insert a sim, the phone stays on searching. I made sure that I rebooted the device and I also tried re-seating the sim many times. I believe the device is unlocked and the imei/esn is in clean standing with T-Mobile. I tried a MetroPCS sim card and it stayed on searching, same thing happened with a Verizon sim. However when I inserted the T-Mobile sim, it sometimes says no service but ever since I rebooted the device, it stays on "searching" no matter which sim is installed. I find this whole ordeal frustrating since the signal bars show up for the MetroPCS and T-Mobile sim but with Verizon nothing happens. Any help would be greatly appreciated.
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
knite75 said:
Yours is G928T? If yes, it does not support Verizon/Sprint even if it's unlocked.
Did you buy it off of Craigslist/Ebay? It might be blacklisted. checkesnfree.com
Click to expand...
Click to collapse
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
gazasalim said:
Yes, it's the G928T but it's not blacklisted I checked. The simcards I was using on the phone were old ones(no longer in service) I thought they would work. I used a scissor to cut my WORKING sim and placed it in the phone and it took the MetroPCS sim. Everything works fine now except calls and text only work with WiFi Calling on. If I turn off WiFi, I can't text or make calls(not on registered network) but if I turn the WiFi back on, it works fine. Any suggestions?
Click to expand...
Click to collapse
knite75 said:
MetroPCS and T-Mobile are on the same network.
Check/add MetroPCS APN.
Setting -> Mobile Networks -> Access Point Names
Add MetroPCS APN if it's not there.
Click to expand...
Click to collapse
Yeah I know they are which baffles me as to why it isn't working. I tried adding a custom APN but same thing happens. I get calls/sms on WiFi but if I turn it off I get "No Service"
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
erick161 said:
Just go to metro and get a new Sim. You could have damaged it by cutting it. It should be free. ATT gives me then free all the time. Usually, the phone will just auto update the apn settings when a specific carriers Sim is inserted
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I went and it turns out the device is blacklisted. This whole time I was rolling with the imei in the phone, after checking last night, I noticed that the imei on the back of the device differs from the one that's actually on the software. I was able to get in touch with the seller and he's coming back to give me my money back. Guess a mod can mark this thread closed.
I've got my unlocked S9 from Samsung. I have a Redpocket CDMA sim card, which works fine in a Samsung S7E and a Google Pixel. However, when putting this sim card in S9, the S9 could not get on its network. It shows Emergency calls only and "Not registered on network" when making a call.
Sometimes it shows "refreshing sim card data" and no network. When turning to network modes, it says "LTE/3G/2G" etc but redpocket cs seems to believe the right one should be "LTE/CDMA" instead, which is not in the list.
I tried various usual ways such as factory reset etc, which did not change anything.
I tried a project Fi and a verizon sim card in the S9 and they were recognized with no problem. Thus I think the S9 is not defective.
I did some searches and people mentioned S8 had the same issue too: https://forum.xda-developers.com/galaxy-s8/help/unlocked-s8-failed-to-register-red-t3736850
I am wondering whether anyone has this problem or a solution.
Will flashing to verizon firmware help?
Thanks.
I'm having the same issue with PagePlus! I just put the SIM from my VZW S6 into my unlocked S9 and when that didn't work I chatted with support to do an ESN change (I thought perhaps PP needed to do something on their end). I was told if there was no "LTE/CDMA" option that the phone wouldn't work on PP.
I tried using an app to switch between different network modes (including the LTE/CDMA/UMTS auto which my S6 uses) to no avail.
I'm tempted to try flashing the VZW firmware, but the post here makes me wonder if it will accomplish anything.
I tried that APP to force network mode too but it did not seem to work.
As an update, Redpocket customer service is really great that they moved my number from Verizon network to their GSM/ATT network, and everything works fine now. I do not want to try flashing verizon firmware for the same reason...
Too bad Samsung could not get such a simple thing right.
janame said:
I'm having the same issue with PagePlus! I just put the SIM from my VZW S6 into my unlocked S9 and when that didn't work I chatted with support to do an ESN change (I thought perhaps PP needed to do something on their end). I was told if there was no "LTE/CDMA" option that the phone wouldn't work on PP.
I tried using an app to switch between different network modes (including the LTE/CDMA/UMTS auto which my S6 uses) to no avail.
I'm tempted to try flashing the VZW firmware, but the post here makes me wonder if it will accomplish anything.
Click to expand...
Click to collapse
Can we sue them?
I faced the same issue too. Apparently, Samsung does a setting update that prevents the sim from registering for Verizon's MVNOs. I called them and they said they NEVER heard of this issue. Apparently, you all did too. I am tempted to sue Samsung for this since this could be an antitrust issue. They are preventing competition by working with Verizon and feigning ignorance.Can any of you comment on this?
I was going to go with one of Verizon's mvnos. And their SIM card would not work and I did not realize it until I spend the $40. I had to put an actual Verizon sim in my unlocked phone to use the Verizon network. So either Verizon is blocking the S9 on mvns or the mvnos don't have the updated information for the S9. Total wireless told.me it Had to be a Verizon branded phone for it to work. So I think if someone flashed the Verizon firmware on the unlocked version it probably would work.
i dont see anywhere on the post where you contacted the MVNO provider, to register the ESN or IMEI of the device.
Also does this MVNO even allow BYOD?
i remember I had a line from Cricket or Metro that had a sim card, it worked on my Nexus 5x, however inserting it to another nexus 5x, it didnt work, I had to call them to register my IMEI
Hey guys this is an old thread, but maybe this will help someone. My old Red Pocket SIM would not work on the S9, but my renewal came with a new SIM, ending in 8222-15XX (old was 8180-50XX) For ****s and giggles I put it in and it showed LTE/CDMA and verizon. Had RP CS switch my active SIM and now it works with no workaround!
TL;DR Try a new RP SIM if you are using one a year old or older.
I also have similar issue.
Where I used to get lte over voice, but no longer getting after a recent update from samsung. Using Redpocket cdma sim
Now I have lte and voice, but dont get lte over voice even though redpocket said they have enabled Volte on my line
We just added an Unlocked Galaxy S9 (replaced S5) purchased from Amazon (Black Friday sale), ordered new Sim from Pageplus (MVNO using Verizon ), called them to transfer the phone number, popped it in and the S9 configured itself for Pageplus, and everything works perfectly...
ToyTank said:
Hey guys this is an old thread, but maybe this will help someone. My old Red Pocket SIM would not work on the S9, but my renewal came with a new SIM, ending in 8222-15XX (old was 8180-50XX) For ****s and giggles I put it in and it showed LTE/CDMA and verizon. Had RP CS switch my active SIM and now it works with no workaround!
TL;DR Try a new RP SIM if you are using one a year old or older.
Click to expand...
Click to collapse
That's great news. I switched to GSMA due to CDMA issue. I will switch back to CDMA after my current plan expires.
I heard that RCS (messaging via wifi connection similar to imessage - samsung messages app supports it in pie I believe, not sure about oreo) is active in verizon now including mvnos. Have you tried it?
sam298 said:
That's great news. I switched to GSMA due to CDMA issue. I will switch back to CDMA after my current plan expires.
I heard that RCS (messaging via wifi connection similar to imessage - samsung messages app supports it in pie I believe, not sure about oreo) is active in verizon now including mvnos. Have you tried it?
Click to expand...
Click to collapse
I tried for my unlocked note 8. For the new sim coming from red pocket, it works great at the first time. But later when I switch the sim to a GSM sim for international travel and then switch the sim back to the red pocket sim, the same problem appeared. I have to use verizon sim to get LTE/CDMA back in the emergency mode.
queenriver said:
I tried for my unlocked note 8. For the new sim coming from red pocket, it works great at the first time. But later when I switch the sim to a GSM sim for international travel and then switch the sim back to the red pocket sim, the same problem appeared. I have to use verizon sim to get LTE/CDMA back in the emergency mode.
Click to expand...
Click to collapse
Traded in my S9 with an S10+ and the redpocket CDMA sim works now!
ToyTank said:
.My old Red Pocket SIM would not work on the S9, but my renewal came with a new SIM, ending in 8222-15XX (old was 8180-50XX) For ****s and giggles I put it in and it showed LTE/CDMA and verizon. Had RP CS switch my active SIM and now it works with no workaround!
Click to expand...
Click to collapse
I think you've found the answer for those who are unable to get their existing RP SIM to work on the S6-7-8-9's running OREO or PIE. I just took a later serial numbered CDMAV SIM (89140000018821472XX), inserted it into another S8+ that I have, booted it and saw the Verizon Wireless scroll across the top. I'll chat with RP today and see if they will switch the ICCID numbers between old and new.
After countless hours looking into this problem, I tip my hat to you for the solution provided.
Try as I may, in the end it didn't work for me.
It worked for me when I flashed the latest un-branded U1 firmware G960U1 UEU6CSI1 via the patched Odin, from:
https://updato.com/firmware-archive-select-model/?record=E68EDDB6DBFB11E99E59FA163EE8F90B
I've also done a full factory reset from recovery after the flash.
I guess they must have fixed it with the latest firmware updates... ymmv
Since the August update, both of my Verizon branded S8+'s work directly upon inserting a RP sim card.
POSSIBLE SOLUTION!! (YMMV)
I had a similar problem when I upgraded to Android 10. I no longer had CDMA as a choice for Network mode. Here is the solution that worked for me:
Step #1:
Go to the phone dialer and dial *#*#4636#*#*
This will bring up a new screen
Select "Phone Information"
You will be greeted with a scary-looking screen with lots of stuff
Scroll down and look for "Set Preferred Network Type"
Select "LTE/CDMA auto (PRL)" from the drop-down
This will give you phone service... but not data.
STEP #2
To get data services, you will need to create an APN.
Go to settings/connections/mobile networks/Access Point Names
Click on add and enter the following:
APN Name: Verizon
APN: VZWINTERNET
MCC: 311
MNC: 480
Authentication Type: None
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
I found that this APN worked for me... (YMMV)
Hope this is helpful...
are you folks still having trouble with this? it doesnt seem like a difficult obstacle to overcome
Thank you sooo much! Creating the APN did the trick.
I just bought a used Verizon S20+ that is unlocked. When I put in a visible sim (or cricket) it doesn't seem to want to connect to their network. In settings I can change from Global to LTE/utms etc and when selecting Visible it just says registering on network and never finishes. I reset the network settings, but to no avail.
The sim is provisioned and works in other unlocked phones so I know it's something specific to this one.