Disclaimer :
Code:
I am not responsible for any damage to your device!
Use this mod at your own risk!
What's this?
This mod increases the audio bitrate on video recording from a disgraceful 96kbps to a respectable 320kbps. Thus, giving a richer, more pleasing audio quality.
Still confused? Click here for a better explanation
Requirements :
- A rooted phone with magisk installed
- An opened mind (important!)
Contributors :
@Jt380p
@hrissim
* NOTES * (READ) :
- Not all ROMs are compatible with this mod, you might end up in a bootloop. YOU HAVE BEEN WARNED!
Download :
https://drive.google.com/file/d/1WO3RKHuC_v3w6cGOLVg-oCTLKKQjzItP/view?usp=sharing (Flash with magisk manager)
Source :
https://forum.xda-developers.com/Mi-9/themes/magisk-audio-bitrate-increase-t3927810
Audio files provided by @hrissim
Thanks to :
@hrissim
@topjohnwu for Magisk
Created : 19/11/2019
Last updated : 19/11/2019
reserved
Nice. Thank you, i love audio tweaks on my phone!
Tested
I`ve just tested it.
No any issues with the installation.
Afterwards I recorded a video in very noisy surrounding from the TV with volume setting high.
Here are the results:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ideal, understandable voices from the people around. Played the file within the phone, on smart TV and PC.
Good job mate - regards!
PS: In my phone only GCam records video with audio bitrate 192kb/s. The other two - stock and 4k Camera Pro with 316-320kb/s.
You fix audio bitrate, but now video bitrate is only 20... Can you fix... Without mod v.bitrate is 40.
Jt380p said:
Disclaimer :
What's this?
This mod increases the audio bitrate from a disgraceful 96kbps to a respectable 320kbps for recording. Thus, giving a richer, more pleasing audio quality.
Still confused? Click here for a better explanation
Requirements :
- A rooted phone with magisk installed
- An opened mind (important!)
Contributors :
@Jt380p
@hrissim
* NOTES * (READ) :
- Not all ROMs are compatible with this mod, you might end up in a bootloop. YOU HAVE BEEN WARNED!
Download :
https://drive.google.com/file/d/1WO3RKHuC_v3w6cGOLVg-oCTLKKQjzItP/view?usp=sharing (Flash with magisk manager)
Source :
https://forum.xda-developers.com/Mi-9/themes/magisk-audio-bitrate-increase-t3927810
Audio files provided by @hrissim
Thanks to :
@hrissim
@topjohnwu for Magisk
Created : 19/11/2019
Last updated : 19/11/2019
Click to expand...
Click to collapse
Which ROMs are compatible? You didn't mention in which ROM it works without any issues..
Kidence said:
You fix audio bitrate, but now video bitrate is only 20... Can you fix... Without mod v.bitrate is 40.
Click to expand...
Click to collapse
I didnt change the video bitrate. What app were you using?
bigorbi said:
Which ROMs are compatible? You didn't mention in which ROM it works without any issues..
Click to expand...
Click to collapse
The "incompatible" roms are still yet to be determined. It varies from each device as well. The guaranteed roms that will work are MIUI, and xiaomi.eu
Stock MIUI camera... Miroom 9.11.14.
Kidence said:
Stock MIUI camera... Miroom 9.11.14.
Click to expand...
Click to collapse
Since its MIUI camera, it might be using a variable bitrate codec.
I try in LL and good light, but video bitrate is locked ~ 20. Thanks for mod and help.
Kidence said:
I try in LL and good light, but video bitrate is locked ~ 20. Thanks for mod and help.
Click to expand...
Click to collapse
Good light? Video bitrate? Gosh... Some people should read more.
Jt380p said:
Disclaimer :
Code:
I am not responsible for any damage to your device!
Use this mod at your own risk!
What's this?
This mod increases the audio bitrate from a disgraceful 96kbps to a respectable 320kbps for recording. Thus, giving a richer, more pleasing audio quality.
Still confused? Click here for a better explanation
It doesnt work on Havoc custom rom, just to let you know. If you know how to do it for other roms it would be great.
Click to expand...
Click to collapse
junglist said:
Jt380p said:
Disclaimer :
Code:
I am not responsible for any damage to your device!
Use this mod at your own risk!
What's this?
This mod increases the audio bitrate from a disgraceful 96kbps to a respectable 320kbps for recording. Thus, giving a richer, more pleasing audio quality.
Still confused? Click here for a better explanation
It doesnt work on Havoc custom rom, just to let you know. If you know how to do it for other roms it would be great.
Click to expand...
Click to collapse
I need to see evidence
Click to expand...
Click to collapse
Jt380p said:
junglist said:
I need to see evidence
Click to expand...
Click to collapse
I notice system/etc/ is unchanged, only vendor/etc not sure if that makes a difference
Click to expand...
Click to collapse
junglist said:
Jt380p said:
I notice system/etc/ is unchanged, only vendor/etc not sure if that makes a difference
Click to expand...
Click to collapse
Thats where the file is located. What camera were you using? Also, what does the "file" in system/etc do?
Click to expand...
Click to collapse
junglist said:
Jt380p said:
I notice system/etc/ is unchanged, only vendor/etc not sure if that makes a difference
Click to expand...
Click to collapse
I manually edited /system/etc and replaced all 96000 and 156000 with 320000, and it seems to have done the trick on my rom Havoc, the file in vendor makes no difference, I am using anxcamera to test
Click to expand...
Click to collapse
junglist said:
junglist said:
I manually edited /system/etc and replaced all 96000 and 156000 with 320000, and it seems to have done the trick on my rom Havoc, the file in vendor makes no difference, I am using anxcamera to test
Click to expand...
Click to collapse
I guess its just anx camera
Click to expand...
Click to collapse
Jt380p said:
junglist said:
I guess its just anx camera
Click to expand...
Click to collapse
maybe, I also notice the sound seems a bit clipped at the bass end, not sure how to adjust that.
Click to expand...
Click to collapse
Work on MIUI 11 on android 10?
Jt380p said:
Disclaimer :
Code:
I am not responsible for any damage to your device!
Use this mod at your own risk!
What's this?
This mod increases the audio bitrate from a disgraceful 96kbps to a respectable 320kbps for recording. Thus, giving a richer, more pleasing audio quality.
Still confused? Click here for a better explanation
Requirements :
- A rooted phone with magisk installed
- An opened mind (important!)
Contributors :
@Jt380p
@hrissim
* NOTES * (READ) :
- Not all ROMs are compatible with this mod, you might end up in a bootloop. YOU HAVE BEEN WARNED!
Download :
https://drive.google.com/file/d/1WO3RKHuC_v3w6cGOLVg-oCTLKKQjzItP/view?usp=sharing (Flash with magisk manager)
Source :
https://forum.xda-developers.com/Mi-9/themes/magisk-audio-bitrate-increase-t3927810
Audio files provided by @hrissim
Thanks to :
@hrissim
@topjohnwu for Magisk
Created : 19/11/2019
Last updated : 19/11/2019
Click to expand...
Click to collapse
Work on MIUI 11 on android 10?
Related
SOUND DISTORTION FIX FOR KK BASED CUSTOM ROM'S
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
#include
/*
* Your warranty is already void because you are flashing this over a Custom ROM!!
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about this FIX/MOD/PATCH
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH THE DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM/PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS.
*/
◄ DOWNLOADS ►
Dev-Host
◄ TESTED ROM'S ►
ROM'S with sound issues
◄ INSTRUCTIONS ►
Flash SoundFix_0.2.zip via TWRP Recovery, TWRP Recommended!!
Use Viper4Android v2.3.3.0 (Android 4.4) instead of DSP Manager or other Audio MOD's, this is just a Suggestion...
THIS FIX IS NO MORE REQUIRED FOR LATEST KK BUILDS!!
FAQ
FAQ
What is this?
The title of the thread gives it away? doesn't it?
Will this Distortion Fix work on XYZ ROM or XYZ Device?
This fix is only for KK Based Custom ROM's for the Xiaomi Redmi 1S.
This Fix/Mod/Patch does not work!!
Well then....why are you even here? Go cry to your Mommy!!
CHANGELOG
0.1
- Distortion Fixed
- Volume increased upto a safe level (tested)
0.2
- Call Recording Fixed
Move this thread
eswarvf said:
Move this thread
Click to expand...
Click to collapse
Where? :silly:
Why?
bro i have already flashed crystalZFX from another post.. it is loud too (RX4 vol value is 96) but audio gets distorted ah high vol.
now will this work if i flash this mod?
-pacman rc3
rcrazy88 said:
bro i have already flashed crystalZFX from another post.. it is loud too (RX4 vol value is 96) but audio gets distorted ah high vol.
now will this work if i flash this mod?
-pacman rc3
Click to expand...
Click to collapse
Yes it will!!
deadlyindian said:
Yes it will!!
Click to expand...
Click to collapse
it worked dude.. though audio volume is set to 84
good work
rcrazy88 said:
it worked dude.. though audio volume is set to 84
good work
Click to expand...
Click to collapse
Speaker volume is set to 88
This fix not just changes the values of one audio related file, but also has other audio changes & addon library files to remove the distortion.
Code:
<path name="speaker">
<ctl name="SLIM RX1 MUX" value="AIF1_PB" />
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="RX4 MIX1 INP1" value="RX1" />
[B][COLOR="RoyalBlue"]<ctl name="RX4 Digital Volume" value="88" />[/COLOR][/B]
<ctl name="SPK DAC Switch" value="1" />
</path>
Viper diver not installed properly,when open viper it shows driver installation notification and I select super quality,then it shows reboot notification, after reboot it show driver installation notification again and sound effect are not changed.I am using mokee ROM release version.please give me the solution.
itsmeapple said:
Viper diver not installed properly,when open viper it shows driver installation notification and I select super quality,then it shows reboot notification, after reboot it show driver installation notification again and sound effect are not changed.I am using mokee ROM release version.please give me the solution.
Click to expand...
Click to collapse
Did you install the KitKat version of Viper?
If yes then go to Settings > Sound > Music Effect > Select Viper4Android
Super Audio Quality will Drain your battery...
deadlyindian said:
Did you install the KitKat version of Viper?
If yes then go to Settings > Sound > Music Effect > Select Viper4Android
Super Audio Quality will Drain your battery...
Click to expand...
Click to collapse
I m ok with manual edit of sound level in xml file + stock DSP manager for Redmi1S
ViperAndroid is good tool and I use it on Nexus 7 (2013) which doesn't have too much of loudspeaker volume.
kapil.git said:
I m ok with manual edit of sound level in xml file + stock DSP manager for Redmi1S
ViperAndroid is good tool and I use it on Nexus 7 (2013) which doesn't have too much of loudspeaker volume.
Click to expand...
Click to collapse
There are many who don't know what to do & are still facing the issue, rather than telling them what to do & what not to, this flashable Zip fill fix it as flashing is an easy process.
Some users make mistakes while editing xml and we don't want that to happen do we? While this might not happen in most cases...but still why take the risk?
SoundFix MOD is not just a simple xml edited MOD. :angel:
Sure DSP is good and gives a good audio experience but Viper4Android is for those who are looking for more than just listening to Music that's why i posted it as a suggestion bro. :good: :victory:
All of us have different thinking, so based on that we make decisions.
You made your's & i made mine and Users who are downloading this MOD made theirs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Anyway which ROM are you on? Is there any one specific ROM which you'd like to use as a daily driver or are using it right now?
Right now i'm on Mokee Release 141108 + my SoundFix mod & i feel this one is pretty stable at the moment & thinking of using it as a daily driver.
What do you say?
deadlyindian said:
All of us have different thinking, so based on that we make decisions.
Click to expand...
Click to collapse
I respect that , just shared my thoughts ( feedback) not a judgement on your work. :highfive:
deadlyindian said:
Anyway which ROM are you on? Is there any one specific ROM which you'd like to use as a daily driver or are using it right now?
Right now i'm on Mokee Release 141108 + my SoundFix mod & i feel this one is pretty stable at the moment & thinking of using it as a daily driver.
What do you say?
Click to expand...
Click to collapse
Installed a Mokee nightly 2nd Nov , since then I hv been using ROMs from xda on & off ..
In my free time,whenever I have a 2 hour window .. cwm backup + sdcard change ... overnight use .. if major issue then revert on backup and back to office @work.
I will be doing zipaligning ,supercharging ,Lagfix & purePerformance mods once I fix my ROM.. then I keep things same for a year or couple..
Even mokee nightlies in previous week were not agreeable due to change of ext/sdcard
kapil.git said:
Installed a Mokee nightly 2nd Nov , since then I hv been using ROMs from xda on & off ..
In my free time,whenever I have a 2 hour window .. cwm backup + sdcard change ... overnight use .. if major issue then revert on backup and back to office @ work.
I will be doing zipaligning ,supercharging ,Lagfix & purePerformance mods once I fix my ROM.. then I keep things same for a year or couple..
Even mokee nightlies in previous week were not agreeable due to change of ext/sdcard
Click to expand...
Click to collapse
I previously was on AOSPA ♥ the gaming, but cam wasn't upto mark so used Google Camera & the pic taken using it was impressive > PIC < then i faced some issues with stock camera (not able to capture anything using front cam) , i could fix it (reset app data) but i wanted to try new mokee release anyway so switched to it & i'm lovin it ♥
deadlyindian said:
I previously was on AOSPA ♥ the gaming, but cam wasn't upto mark so used Google Camera & the pic taken using it was impressive > PIC < then i faced some issues with stock camera (not able to capture anything using front cam) , i could fix it (reset app data) but i wanted to try new mokee release anyway so switched to it & i'm lovin it ♥
Click to expand...
Click to collapse
Yes, ported stock cam has few shortcoming like absence of burst mode..
mokee is decent ROM , but we will always have suspicion on China ROMs because "reasons"..
Anyways after every flash of nightly, before booting it first time , I mount /system and /data in CWM n get rid of any Chinese Apps.
in /system/app
in /system/third-app
in /data/app
in /data/priv-app
in /data/third-app
These chinese ware keep changing places and I have to search them everytime I flash new.
After that push some apps in /system/
PerformanceControl-2.2.5.apk -> /system/app/
TitaniumBackup.apk -> /system/app/
bootanimation.zip -> /system/media/
unmount /system /data in cwm and restart..
# adb restore apk.obb.nosystem.ab
and its like my 1 hour old phone , just with new ROM and cleaner.
kapil.git said:
Yes, ported stock cam has few shortcoming like absence of burst mode..
mokee is decent ROM , but we will always have suspicion on China ROMs because "reasons"..
Anyways after every flash of nightly, before booting it first time , I mount /system and /data in CWM n get rid of any Chinese Apps.
in /system/app
in /system/third-app
in /data/app
in /data/priv-app
in /data/third-app
These chinese ware keep changing places and I have to search them everytime I flash new.
After that push some apps in /system/
PerformanceControl-2.2.5.apk -> /system/app/
TitaniumBackup.apk -> /system/app/
bootanimation.zip -> /system/media/
unmount /system /data in cwm and restart..
# adb restore apk.obb.nosystem.ab
and its like my 1 hour old phone , just with new ROM and cleaner.
Click to expand...
Click to collapse
Try SetCPU with profiling, useful for switching frequency for different events. (saves battery)
The Survival Profile is activated when my battery is below 30%/when cpu temp is high/when battery temp is high (any of these)
deadlyindian said:
Try SetCPU with profiling, useful for switching frequency for different events. (saves battery)
The Survival Profile is activated when my battery is below 30%/when cpu temp is high/when battery temp is high (any of these)
Click to expand...
Click to collapse
thanks,
Yes I learned about the profiles via miui forum ( used setcpu before without it )
http://en.miui.com/thread-47923-1-1.html here is what made me look into the blindspot. few more stuff
kapil.git said:
thanks,
Yes I learned about the profiles via miui forum ( used setcpu before without it )
http://en.miui.com/thread-47923-1-1.html here is what made me look into the blindspot. few more stuff
Click to expand...
Click to collapse
Yep.....useful!!
Nice sound quality
:highfive:
deadlyindian said:
SOUND DISTORTION FIX FOR KK BASED CUSTOM ROM'S
◄ DOWNLOADS ►
Direct Link
Dev-Host
◄ TESTED ROM'S ►
ROM'S with sound issues
◄ INSTRUCTIONS ►
Flash SoundFix.zip via Recovery
Use Viper4Android v2.3.3.0 (Android 4.4) instead of DSP Manager or other Audio MOD's, this is just a Suggestion...
Click to expand...
Click to collapse
Hey bro first of all this is amazing its work like a charm.
But i think something wrong with my redmi 1s
Flash this using cwm recovery flashed successfully
Used whole day sound quality was just awesome
But when i reboot my device its stucks on mi logo always i tried thrice but it as it is stucks on mi logo then i reboot to recovery mood and done factory data reset and clear cach and then reboot its now working.
Then again i reboot my device to check what happens but this again stucks on mi logo.plz help me whats wrong with this...?each and every time when i reboot my phone i have to do factory data reset...please help...thanx
farooque7508 said:
:highfive:
Hey bro first of all this is amazing its work like a charm.
But i think something wrong with my redmi 1s
Flash this using cwm recovery flashed successfully
Used whole day sound quality was just awesome
But when i reboot my device its stucks on mi logo always i tried thrice but it as it is stucks on mi logo then i reboot to recovery mood and done factory data reset and clear cach and then reboot its now working.
Then again i reboot my device to check what happens but this again stucks on mi logo.plz help me whats wrong with this...?each and every time when i reboot my phone i have to do factory data reset...please help...thanx
Click to expand...
Click to collapse
Calm down buddy, tell me which kk rom are you on?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
PsyRom is a Miui based rom and i'll update it for a long time!
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Changelogs
Click Here
# I have sold this device and i can't test my roms, but i'll continue to update this rom.
Downloads
PSYROM v4.1
Older releases
PsyRom v1.1 DOWNLOAD
PsyRom v1.2.1 DOWNLOAD
PsyRom v1.3 (STABLE) DOWNLOAD
PsyRom v1.4 (STABLE) DOWNLOAD
PsyRom v1.5 (STABLE) DOWNLOAD
PsyRom v2.0 (STABLE) DOWNLOAD
PsyRom Special Version (MIUI 8 alpha) DOWNLOAD
PsyRom v2.5 (MiUi 8 BETA) DELETED due to "Validation" issue
PsyRom v2.6 (MiUi 8 BETA) DOWNLOAD
PsyRom v3.0 (MiUi 7 STABLE) DOWNLOAD
PsyRom v3.1 (MiUi 7 STABLE) DOWNLOAD
PsyRom v3.2 (MiUi 8 STABLE) DOWNLOAD
PsyRom v3.5 (MiUi 8 STABLE) DOWNLOAD
TOOLS
Skynet TX7 DOWNLOAD (Optional, highly recommended)
Click to expand...
Click to collapse
Installation
DO NOT WIPE /system PARTITION
Factory Reset ("/data, /cache, /dalvik-cache")
Flash ROM
Flash Project Skynet (optional) (recommended) (high entropies can cause battery drain, set it to 64 read and 128 write)
DO NOT FLASH SUPERSU
DO NOT FLASH DOLBY ATMOS
DO NOT FLASH XPOSED
Wipe cache and dalvik only if you have flashed Skynet
Click to expand...
Click to collapse
Configuration
#ADBlock Switcher
1. Open "Material Terminal" app
2. Type:
Code:
su
adblock
When the script ask to you, press "y" and chose your preferred adblock.
NOTE:"Light ADBlock" is enables by default.
#OTA Updates
You will receive notification when updates are availables.
If you not receive notifications, simply tap on OTA Update Center app and search it manually.
#Surprise Script (only for italian users)
1. Open Material Terminal app
2. Type:
Code:
corso
3. Follow script instructions
#BatteryCalibrator
1. Open Material Terminal app
2. Type:
Code:
su
BatteryCalibrator
Let the battery charge at 100% and voltage show "4428mv".
Press "A" and the script will automatically calibrate your battery, or press "C" for do it manually.
The battery is now calibrated!
#PROJECT SKYNET
1. Open Material Terminal app
2. Type:
Code:
su
menu
A menu will appear and you can do anything you want.
For maximum performance, set "skynet mode" on "game" and with Kernel Adiutor you can set governor on "ondemand" or "performance"
More info on Project Skynet:
PROJECT SKYNET
Click to expand...
Click to collapse
Thanks to:
@Chainfire for SuperSu
@Stericson for Busybox
@Rovo89 for Xposed
@Zeppelinrox for BatteryCalibrator script
@BSDgeek_Jake for MotherOfAllADBlocking
@Dolby for Dolby Atmos and @worstenbrood for porting
@k1ks for PROJECT SKYNET
@Namaless
@Paget96
... and many other that i can't remember at this moment
Click to expand...
Click to collapse
If you like my work hit thanks button or you can offer me a coffee clicking here
XDA:DevDB Information
PsyRom, ROM for the Redmi Note 2
Contributors
Psy_Man
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MIUI
Based On: MultiROM
Version Information
Status: Stable
Current Stable Version: 4.1
Stable Release Date: 2017-06-13
Current Beta Version: 2.6
Beta Release Date: 2016-06-22
Created 2016-04-10
Last Updated 2017-06-14
Thx for your Work
Download and test this rom
any screenshoots ???
4k was a joke? Sad
But maybe some with true 1080p60fps? Cause with media_profiles yes, we're getting 60fps, but the quality is like 480p video.
galakty said:
4k was a joke? Sad
But maybe some with true 1080p60fps? Cause with media_profiles yes, we're getting 60fps, but the quality is like 480p video.
Click to expand...
Click to collapse
4k it is not necessary for my opinion
Psy_Man said:
4k it is not necessary for my opinion
Click to expand...
Click to collapse
Dont think its possible anyway.. But, could try with 60fps maybe? Or atleast try to increase bitrate for FHD camera? Currently we have 15mbps, will be nice if there is 20-25mbps (not possible with any mod currently).
galakty said:
Dont think its possible anyway.. But, could try with 60fps maybe? Or atleast try to increase bitrate for FHD camera? Currently we have 15mbps, will be nice if there is 20-25mbps (not possible with any mod currently).
Click to expand...
Click to collapse
I can increase quality recording up to 30mbps
The rom is working perfectly fine,I have tweaked the device quite a bit, wondering how much the battery is going to last. Thank you Psy_Man
downloading now
looks promising.. great work by the dev..
thank you..
OTA seems to have some problem, says something about a missing file.
Thanks for letting me know about skynet, I'll have to read more about it. Does it work on any MIUI ROM?
Psy_Man said:
I can increase quality recording up to 30mbps
Click to expand...
Click to collapse
Can You say how? Or make its flashable via TWRP for other roms on MIUI?
IshtaNoob said:
OTA seems to have some problem, says something about a missing file.
Thanks for letting me know about skynet, I'll have to read more about it. Does it work on any MIUI ROM?
Click to expand...
Click to collapse
Report it to bugs section, and yes, skynet works with all android roms!
@Psy_Man hey,
First things first thank you for the effort you are making.
I wanted to say that am excited to try your rom but whenever i flash it and do the the exact same as you said i just can't pass the miui logo that appears when the phone first boots up...
Any ideas?
*EDIT: It seems not as I mentioned before that am stuck with miui logo, its just that there is no boot logo and its booting with the miui logo but without the android under it that exist in the stock one...
aghr11 said:
@Psy_Man hey,
First things first thank you for the effort you are making.
I wanted to say that am excited to try your rom but whenever i flash it and do the the exact same as you said i just can't pass the miui logo that appears when the phone first boots up...
Any ideas?
*EDIT: It seems not as I mentioned before that am stuck with miui logo, its just that there is no boot logo and its booting with the miui logo but without the android under it that exist in the stock one...
Click to expand...
Click to collapse
Report it to bugs section please
Psy_Man said:
Report it to bugs section please
Click to expand...
Click to collapse
IF ur stuck on logo, just do full wipe in TWRP.
What about this camera bitrate? Can you make flashable pack with 25 mbps for example 1080p? Its hard to do? Cause I was experimenting with build.prop and no results.
galakty said:
IF ur stuck on logo, just do full wipe in TWRP.
What about this camera bitrate? Can you make flashable pack with 25 mbps for example 1080p? Its hard to do? Cause I was experimenting with build.prop and no results.
Click to expand...
Click to collapse
I will make it available only on my roms
Psy_Man said:
I will make it available only on my roms
Click to expand...
Click to collapse
Okay .. So I will extract the camera apk if You dont want to share it.
I will try later. Nice rims out there for rn2
Sent from my Redmi Note 2 using XDA-Developers mobile app
If the OTA Updater app has any issues, i made a flashable zip that can enable OTA service (only for PsyRom v1.4)
https://www.androidfilehost.com/?fid=24499762635997791
Hey all!
I've made this little mod since I saw this other thread, and considered it relevant enough to create a thread, so that as soon as Nougat came out I could keep the mod updated with the newest files.
For now, it just amplifies the volume significantly, however more features may come in the future.
Changes included:
- Improved loudspeaker max. volume
- Possibly more in the future (Looking forward Dolby Atmos integration)
Downloads:
In the attachments until AndroidFileHost adds the Wileyfox Swift 2 to their list of devices.
Installation instructions:
1. Unlock your bootloader and flash TWRP
2. Download the latest version zip
3. Boot into TWRP, make a backup if you wish, and choose Install and locate and flash the ZIP
4. Reboot and enjoy!
Enjoy, and don't forget to leave a Thanks if you loved it!
Thanks a lot linuxct
linuxct said:
Hey all!
I've made this little mod since I saw this other thread, and considered it relevant enough to create a thread, so that as soon as Nougat came out I could keep the mod updated with the newest files.
For now, it just amplifies the volume significantly, however more features may come in the future.
Changes included:
- Improved loudspeaker max. volume
- Possibly more in the future (Looking forward Dolby Atmos integration)
Downloads:
In the attachments until AndroidFileHost adds the Wileyfox Swift 2 to their list of devices.
Installation instructions:
1. Unlock your bootloader and flash TWRP
2. Download the latest version zip
3. Boot into TWRP, make a backup if you wish, and choose Install and locate and flash the ZIP
4. Reboot and enjoy!
Enjoy, and don't forget to leave a Thanks if you loved it!
Click to expand...
Click to collapse
Is that solution relevant to other devices?
arielgalula said:
Is that solution relevant to other devices?
Click to expand...
Click to collapse
I wouldn't recommend flashing it in other devices than the marmite (Swift 2, Swift 2+ or Swift 2X)... But if you wish to try, you can (but please, do a nandroid backup before, I can't be responsible for any bricks by flashing this mod in a different device than the ones this is targeted to).
P.S. Please don't quote the full OP
________________________________________________
Also, thank you very much @a.cid and @MathewBrack for featuring this thread in the Portal and Social media! ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks you very much linuxct for your work and contribution to the wileyfox community!
I will try the mod asap?
EDIT: Works like a charm, amazing!
Legend! Just got this phone and the volume was the one thing pissing me off, this seemed to clear up the headphone issue i was having so props man your a lifesaver.
linuxct said:
Hey all!
I've made this little mod since I saw this other thread, and considered it relevant enough to create a thread, so that as soon as Nougat came out I could keep the mod updated with the newest files.
For now, it just amplifies the volume significantly, however more features may come in the future.
Changes included:
- Improved loudspeaker max. volume
- Possibly more in the future (Looking forward Dolby Atmos integration)
Downloads:
In the attachments until AndroidFileHost adds the Wileyfox Swift 2 to their list of devices.
Installation instructions:
1. Unlock your bootloader and flash TWRP
2. Download the latest version zip
3. Boot into TWRP, make a backup if you wish, and choose Install and locate and flash the ZIP
4. Reboot and enjoy!
Enjoy, and don't forget to leave a Thanks if you loved it!
Click to expand...
Click to collapse
Hi sorry to revive an old post,
but will this work on s8 g950 volume on this sucks,
thanks
xxmcvapourxx said:
Hi sorry to revive an old post,
but will this work on s8 g950 volume on this sucks,
thanks
Click to expand...
Click to collapse
No? I mean, this isn't an 'old' thread. And it probably will be updated anytime soon.
And no, it's just *specific* for the Wileyfox Swift 2, marmite, and I will ensure this with an assert on newer versions.
Does this work with the Swift 2x on Marshmallow/6.0
jediknight111 said:
Does this work with the Swift 2x on Marshmallow/6.0
Click to expand...
Click to collapse
Update. Yes it does
jediknight111 said:
Does this work with the Swift 2x on Marshmallow/6.0
Click to expand...
Click to collapse
Yes I tested it on the Friday 23/12/2016 final cyanogen 6.0.1 build with no issues.
Thanks good work
Does this increase the volume everywhere? Media volume is brilliant but unfortunately I find the incoming call volume when phoning is far to loud with this.
Any chance for a mod without changing that part?
Jack3volution said:
Does this increase the volume everywhere? Media volume is brilliant but unfortunately I find the incoming call volume when phoning is far to loud with this.
Any chance for a mod without changing that part?
Click to expand...
Click to collapse
I was just about to flash this when I read your post - is the ringer really too loud, even on the lowest volume setting?
leepea said:
I was just about to flash this when I read your post - is the ringer really too loud, even on the lowest volume setting?
Click to expand...
Click to collapse
I'm not meaning the ringer volume. It's the call volume. The voice you hear when phoning. It's like using hands free even when it's on the lowest setting. I had to keep it at least a hands length away from my ear. Also everyone else (people on the bus or train) can hear the person on the other end.
Great many thanks works a treat
Great Mod thanks @linuxct
Can you possibly update this mod to work with Android 7.1.2 as I have now updated but the volume levels leave a lot to be desired. Might need to downgrade back to Marmite at this rate as the volume is far to low.
Not work..
Somehow it broke sound.
Still silent on ringing and mp3 playback..
Will this work on 7.1/lineage marmite swift 2 plus?
Sent from my [device_name] using XDA-Developers Legacy app
sam tyler said:
Will this work on 7.1/lineage marmite swift 2 plus?
Click to expand...
Click to collapse
Did for me, even with xposed framework on the early builds too.
Hello Everyone,
I hope you all are great...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have received a post on my thread requesting a soundmod for Xiaomi mi A1 - Android Oreo Jan Patch - from user laugeek57
After providing me the files he changed his mind...
But Big Thanks go XDA Rajeev for his time in testing...
a memebr requested for Mic Fix robby_tan, so I made a Mic Fix Only...
The Question is, should I add it to the DualSpeaker...? is it an issue...?
PLEASE GIVE ME YOUR FEEDBACKS IN ORDER TO IMPROVE THE MOD...
Dualspeaker Soundmod tutorial can be found here...
!!! ALWAYS MAKE BACKUP OF YOUR FILES BEFORE REPLACING THEM !!!
No worries if you forgot to backup, I have uploaded the backup just in case...
DUALSPEAKER includes ALL, for Buzz Fix or Mic Fix or Both, go into its corresponding Folder...
---> If you install two mods, they will overwrite each other, simply because they are targeting the same file, so choose only one, if you want something, request it...
***** : stands for DUALSPEAKER or MicFix or Mic_And_Buzz_Fix...
Just extract the "Xiaomi_Mi_A1_*****.zip" and get the mixers and place them in your
(system/etc) for Nougat or (system/vendors/etc) for Oreo &
IMPORTANTLY set mixer permissions to 644 (rw-r--r--) ...
reboot...
or
Flash "OREO_TWRP_Xiaomi_mi_A1_*****.zip" or "NOUGAT_TWRP_Xiaomi_mi_A1_*****.zip" according to your device, it will place backup of original mixers and replace current mixers with Modded mixers...
Stable - Tested by members in this thread
or
Use the Magisk Module "OREO_MAGISK_Xiaomi_mi_A1_*****.zip" or "NOUGAT_MAGISK_Xiaomi_mi_A1_*****.zip" according to your device
Stable - Tested by members in this thread
Let me know if you face any issues...
Google Drive: Xiaomi Mi A1 - DualSpeaker/BuzzFix
--- BIG THANKS TO black_arashi for providing me logcat of whatsapp and a recorded video of what happens when playing voice note, Fixed sound issue, some apps you'll hear dualspeaker & some single speaker, it's kernel related issue, not in my hands...
--- Big THANKS go to XDA amarbajpai for his time in testing for buzz sound fix in headphones...
IMPORTANT NOTICE:
This MOD can be used with Equalizers, but this mod sets the phone to the loudest balanced volume gain...
Using Equalizers might cause crackles and noise which damage your earpiece if you don't fix it, to fix it either you adjust the other MOD settings by reducing the boost
or Adjusting my MOD by Opening Mixer_paths_mtp.xml and edit value 84 to 80 or less for earpiece and values for 5,56 (you may not need to change these) are for speaker,
change at your own risk, eleminate all crackles and noises...
Each Device and brand have different SAFE LEVELS however things to Consider:
--- for earpiece: upto 10 value increase is safe ( value 84 to 94 or 95 is Safe)
--- for Speaker: upto 10-20 gain and 1-2 value increase are safe (value 56 to 66-76 and 5 to 6-7)
Keep in mind increasing the volume will cause you issues when using it with other sound mods such as Viper, Dolby, etc...
Code:
<path name="speaker">
........................................................................
<ctl name="Speaker Volume" value="5" /> <!--speaker-->
<ctl name="Digital Gain" value="56" /> <!--speaker-->
........................................................................
<ctl name="RX1 Digital Volume" value="84" /> <!--earpiece-->
........................................................................
</path>
The BuzzFix: It Significantly reduces the Buzz, not eliminate it completely due to "impedance" can't be modified through the mixers, you should hear it very less as reported by the tester...
--- for headphones: default was 84, it was decreased to 65 to reduce unwanted buzz as tester mentioned "The Volume in headphones is very loud at mid point, so max volume is a very rare case for someone to use...", you may raise it but not more than 90 but you'll bust your ear as it's very loud you'll also hear & I quote "LOUD HUMMING BIRDS CHIRPING IN YOUR EARS", raising the Volume will raise the Buzzing sound as well...
Code:
<path name="headphones">
........................................................................
<!-- Possible Fix for headphone buzz/hissing sound XDA-Dev Dante63-->
........................................................................
<ctl name="RX1 Digital Volume" value="65" />
<ctl name="RX2 Digital Volume" value="65" />
<!---->
........................................................................
</path>
Another BIG THANKS TO black_arashi for the Images...
Don't Forget to say :good: THANKS :good: ...
And Please, your Feedbacks are important for futuristic updates to improve the MOD...
(19/03/2018)
--- TWRP has been updated again, it will backup only if there is no backup...
--- Merged Mic Fix into DualSpeaker, DualSpeaker now has everything...
(05/03/2018)
--- TWRP has been updated, it will backup your current Mixers in the same path with file name as "mixername.xml.bak0", if you flash TWRP file twice you'll lose your Original...
(19/02/2018)
--- Upon requests, Mic Fix & Buzz/hiss Sound Fix MOD was created...
(15/02/2018)
--- Magisk Module updated to support V15 and above...
(11/02/2018)
--- Fixed Mic, Requested by robby_tan...
(05/02/2018)
--- Fixed buzz in headphones, THANKS TO @black_arashi & BIGGER THANKS TO @amarbajpai for testing...
--- Thread updated, IMPORTANT NOTICE section, please read it again...
(01/02/2018)
--- Fixed sound issue, some apps you'll hear dualspeaker & some single speaker, it's kernel related, not in my hands...
(31/01/2018)
--- TWRP & MAGISK Created for Nougat...
(30/01/2018)
--- Users reported sound issue in whatsapp voice notes...
(29/01/2018)
--- MOD released thanks to tester Rajeev...
(28/01/2018)
--- Started thread upon request from laugeek57...
Current Complaints:
--- None...
Current Requests:
--- None...
Currently Doing:
--- None...
Done:
--- Fixed Mic requested by robby_tan...
--- Fixed Buzz Sound THANKS TO @black_arashi & BIGGER THANKS TO @amarbajpai for testing...
--- Fixed Sound issues in some applications...
--- MOD Released (Oreo Based)...
--- TWRP & MAGISK are Working...
Confirmed & Conclusions:
--- Stereo Mod is not Possible due to Hardware...
here i am[emoji119]
Sent from Xiaomi Mi A1
---------- Post added at 01:42 PM ---------- Previous post was at 01:38 PM ----------
mark me as a tester.But only for magisk.☺
Sent from Xiaomi Mi A1
samrattt said:
here i am[emoji119]
Sent from Xiaomi Mi A1
---------- Post added at 01:42 PM ---------- Previous post was at 01:38 PM ----------
mark me as a tester.But only for magisk.
Sent from Xiaomi Mi A1
Click to expand...
Click to collapse
Bless you :angel:, but before magisk, it must be done manually first, once everything is captured correctly, the magisk part wouldn't take much time...
if you still want to be a magisk tester, then you'll have to wait a bit longer...
Dante63 said:
Bless you :angel:, but before magisk, it must be done manually first, once everything is captured correctly, the magisk part wouldn't take much time...
if you still want to be a magisk tester, then you'll have to wait a bit longer...
Click to expand...
Click to collapse
I don't have twrp recovery installed!Because i don't wanna lose ota.[emoji19]
Sent from Xiaomi Mi A1
I am willing to test. Provide me files. Or if u need files i can provide
samrattt said:
I don't have twrp recovery installed!Because i don't wanna lose ota.[emoji19]
Sent from Xiaomi Mi A1
Click to expand...
Click to collapse
Manual as in file explorer, copy, paste and change permissions...
It's pretty much useless to make magisk do that to wrong files...
Manual will confirm the MOD working, then you can put back your original mixers and install Magisk MOD....
Dante63 said:
Manual as in file explorer, copy, paste and change permissions...
It's pretty much useless to make magisk do that to wrong files...
Manual will confirm the MOD working, then you can put back your original mixers and install Magisk MOD....
Click to expand...
Click to collapse
He will lost OTA if he change system files.
Rajeev said:
He will lost OTA if he change system files.
Click to expand...
Click to collapse
If I am not mistaken that would be the CSC file which will mismatch the stock...
he will be playing with mixers in "system/etc" or "system/vendor/etc" which shouldn't be related to OTA or Warrenty Void...
Rajeev said:
I am willing to test. Provide me files. Or if u need files i can provide
Click to expand...
Click to collapse
No harm done yet, I just saw this... Great I'll PM you what needs to be done... :good:
Dante63 said:
If I am not mistaken that would be the CSC file which will mismatch the stock...
he will be playing with mixers in "system/etc" or "system/vendor/etc" which shouldn't be related to OTA or Warrenty Void...
Click to expand...
Click to collapse
Modifying system files will break OTA in MI A1 case. Anyway that's not an issue for me. If u wish u can provide files. Since no response from u regarding my Testing offer i am leaving now. U can always ping me if u need testers
Rajeev said:
Modifying system files will break OTA in MI A1 case. Anyway that's not an issue for me. If u wish u can provide files. Since no response from u regarding my Testing offer i am leaving now. U can always ping me if u need testers
Click to expand...
Click to collapse
I am very slow at replying, it seems we're both responding at the same time...
thank you for being a tester... I'll PM you what needs to be done and later release everything here...
Dante63 said:
I am very slow at replying, it seems we're both responding at the same time...
thank you for being a tester... I'll PM you what needs to be done and later release everything here...
Click to expand...
Click to collapse
Sure my friend.... Some times XDA labs sucks
Rajeev said:
Sure my friend.... Some times XDA labs sucks
Click to expand...
Click to collapse
You may try tapatalk then![emoji6]
Sent from Xiaomi Mi A1
samrattt said:
You may try tapatalk then![emoji6]
Sent from Xiaomi Mi A1
Click to expand...
Click to collapse
Still i loves XDA LAB
Waiting for files to test!
samrattt said:
here i am[emoji119]
mark me as a tester.But only for magisk.
Sent from Xiaomi Mi A1
Click to expand...
Click to collapse
edkozuto said:
Waiting for files to test!
Click to expand...
Click to collapse
MOD has been released...
Rajeev said:
Still i loves XDA LAB
Click to expand...
Click to collapse
I know you already tested, but I'll need TWRP & MAGISK testers if possible...
magisk manager says,this zip is not a magisk module.
Sent from Xiaomi Mi A1
samrattt said:
magisk manager says,this zip is not a magisk module.
Sent from Xiaomi Mi A1
Click to expand...
Click to collapse
zipped wrongly wait i will upload it @Dante63 please upload this file in your download list
https://drive.google.com/open?id=10do1AbLZQDHAOpRqrWPQWm4fo8ojbzqN
ramesh1686 said:
zipped wrongly wait i will upload it @Dante63 please upload this file in your download list
https://drive.google.com/open?id=10do1AbLZQDHAOpRqrWPQWm4fo8ojbzqN
Click to expand...
Click to collapse
404 file not found
Sent from Xiaomi Mi A1
Hi guys [Finally we got Dolby atmos on Oreo]
{This is the Updated Dolby Atmos for API 27 - Oreo 8.0 and 8.1 by repey6 from ZTE Axon 7 Oreo}
1st of all Thanks 2 [repey6]
(Ported by repey6)
Not by me
I was tried on lenovo k5 plus aosp Oreo 5.2
Successfully installed
Features of Dolby Atmos Digital Signal Processor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are some of the numerous features of the Dolby Atmos Digital Signal Processor application that you will now be able to enjoy on your Lenovo vibe k5 or plus
•Graphics user interface that's easy to understand and use.
•Apply sound effects to media audio output.
Output support for various media players.
•Intelligent Equalizer which constantly analyzes and dynamically adjusts the audio to match a preset frequency response. It delivers rich and detailed audio that packs power into every note and beat.
•Graphic Equalizer which enables you to customize your sound across the frequency range from bass to treble.
•Volume Leveler which delivers a consistent volume, regardless of change in content or applications based on the device's master volume.
Bass Enhancer which improves bass response via headphones and device speakers, boosting the ability of both to reproduce low-frequency sounds.
•Dynamic enhancer which identifies the audio content and adjusts several parameters based on the audio content to give the best output quality.
•Surround Virtualizer which creates realistic surround sound through any set of headphones or stereo speakers.
•Dialogue Enhancer which improves the clarity of speech in any type of media
[Requirements]
Your lenovo k5 or plus must be running on a minimum of Android 8.0 Oreo for this app to work on it. Here's how to install Android 8.0 Oreo on lenovo k5
•Magisk users have the option of installing directly to /system instead of creating a Magisk module using the included arise_parameters.prop.
•SuperSU users with the systemless root solution have the option of creating a SU module instead of installing directly to /system.
•SuperSU users and Magisk users instructing a /system installation via a prepared /sdcard/arise_parameters.prop are encouraged to confirm that a minimum of 100MB of /system space is available before beginning installation in recovery
•Magisk users performing the default Magisk module installation and SuperSU users performing the optional systemless installation will require 100MB more than the minimum available /data space acceptable (usually 500MB; 500MB + 100MB = 600MB).
•Permissive SELinux Mode is currently required and will be set automatically after each device boot. Do not install archive if this is not acceptable.
{Downloads}
Dolby Atmos Digital Signal Processor
https://drive.google.com/file/d/1uMIHk1cWsqUytCSubGGinCOkQ-19k02g/view?usp=drivesdk
Installation Process
Download Zip .
Copy To Sd Card.
Turn On Your Phone 2 Recovery Mode.
Install The Zip.
Wipe Dalvik Cache and
Does not work on AEX 5.2 latest build the app crashes
thanks a lot man for this awesome port..
working fine in k5 plus 3gb, aex 5.2
no root and no magisk
axal said:
Does not work on AEX 5.2 latest build the app crashes
Click to expand...
Click to collapse
Only supported with magisk
Root your phone with magisk
ROMAN ARICK said:
Only supported with magisk
Root your phone with magisk
Click to expand...
Click to collapse
My phone is rooted with magisk... This does not work
axal said:
My phone is rooted with magisk... This does not work
Click to expand...
Click to collapse
There is a zip inside this zip named "DOA.zip" that is a magisk module so extract it and flash it
sameer12dhi said:
There is a zip inside this zip named "DOA.zip" that is a magisk module so extract it and flash it
Click to expand...
Click to collapse
I followed the steps but the app still crashing, and I not the only with the problem... 5 friends with AEX 5.2 tested and the same result... Maybe only works with Asian variants a40/a46 but not with American variants l36/l37
axal said:
I followed the steps but the app still crashing, and I not the only with the problem... 5 friends with AEX 5.2 tested and the same result... Maybe only works with Asian variants a40/a46 but not with American variants l36/l37
Click to expand...
Click to collapse
Or maybe issue is with aex 5.2 , was working fine on DU . Anyways please don't start complaining to aex Dev about this issue it's not really his concern.
works oreo 8.1.0 rom RR V6.0
sameer12dhi said:
Or maybe issue is with aex 5.2 , was working fine on DU . Anyways please don't start complaining to aex Dev about this issue it's not really his concern.
Click to expand...
Click to collapse
Of course not, only in this thread I write the issues with the objective that the developer is aware and can solve it
axal said:
Of course not, only in this thread I write the issues with the objective that the developer is aware and can solve it
Click to expand...
Click to collapse
That's good , BTW he is not the dev ( the guy that who posted It )
So I don't think reporting it here will have any effect just wait for new build maybe it's fixed and one more thing are you using v4a or any other audio mode because it might not be compatible with that.
sameer12dhi said:
That's good , BTW he is not the dev ( the guy that who posted It )
So I don't think reporting it here will have any effect just wait for new build maybe it's fixed and one more thing are you using v4a or any other audio mode because it might not be compatible with that.
Click to expand...
Click to collapse
No, I'm not using any other equalizer or similar
axal said:
No, I'm not using any other equalizer or similar
Click to expand...
Click to collapse
Then maybe you should try other mods Available they might work
Will this work in RR 6 Oreo ?
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
Why don't you make a flashable zip for magisk
Flashed it on RR 6 IT IS NOT WORKING
Shiva $$$ said:
Will this work in RR 6 Oreo ?
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
Why don't you make a flashable zip for magisk
Click to expand...
Click to collapse
Works perfectly I tried rr 6
And this mod for only magisk
Work fine on AEX v5.2 A6020a40 device but a little crackling was there..... Demo video is playing but sound not coming
Rooted: yes
Magisk: yes
App crashed is A6020a40 AEX 5.3 Android 8.1.0..
Please fix it.
JustForLulz said:
App crashed is A6020a40 AEX 5.3 Android 8.1.0..
Please fix it.
Click to expand...
Click to collapse
If problem extracts it and find DAO. Zip file and flash it on
Using magisk and reboot its done...:silly:
SUDERSHAN BHARATI said:
If problem extracts it and find DOA. Zip file and flash it on
Using magisk and reboot its done...:silly:
Click to expand...
Click to collapse
I can not install through Magisk, writes that this zip is not a Magisk module. Used by Magisk 16.0