Develop Bugs

[Q] GT-N7100 stuck when get into stand by.

Folks,
After install the image, Thunder Lite (http://forum.xda-developers.com/showthread.php?t=2415582) something went down on my Note 2, I re-installed the original image for international phone, that by the way is working perfecly in another note 2,
Every time that the I turn on the device its works well but when the screen turn off and the device stuck, and only pressing home and power button, to force the restart the device comes back.
In the beggining the the led was in red collor, after I install the original PIT file and the bootloader file, the led turned off but the device keeps with the same behavior. http://forum.xda-developers.com/showthread.php?t=1896696
I raise the time to turn off the screen, and the device keeps working until turn off the screen.
I am trying at least back to original installing the OTA image, but the problem didnt solve.
please I need to know hoe to solve this or at least how to start to solve this.
Best Regards
Robson Barros

robson-dasilva said:
Folks,
After install the image, Thunder Lite (http://forum.xda-developers.com/showthread.php?t=2415582) something went down on my Note 2, I re-installed the original image for international phone, that by the way is working perfecly in another note 2,
Every time that the I turn on the device its works well but when the screen turn off and the device stuck, and only pressing home and power button, to force the restart the device comes back.
In the beggining the the led was in red collor, after I install the original PIT file and the bootloader file, the led turned off but the device keeps with the same behavior. http://forum.xda-developers.com/showthread.php?t=1896696
I raise the time to turn off the screen, and the device keeps working until turn off the screen.
I am trying at least back to original installing the OTA image, but the problem didnt solve.
please I need to know hoe to solve this or at least how to start to solve this.
Best Regards
Robson Barros
Click to expand...
Click to collapse
Another thing, seems to me that the USB debugging is not working.
Using the Note2 Toolkit the cell phone is not detecting, even with usb debugging turned on.
Into download mode shows to me:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: YES (6 COUNTS)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM

At first did u try to make a clean installation without user data?
If the problem persists you can flash a factory firmware: DOWNLOAD_N7100XXDLJ2_OXA_FACTORY. If you try this method don't forget to upgrade to a recent firmware. (protection against exynos exploit & sds).

Primokorn said:
At first did u try to make a clean installation without user data?
If the problem persists you can flash a factory firmware: DOWNLOAD_N7100XXDLJ2_OXA_FACTORY. If you try this method don't forget to upgrade to a recent firmware. (protection against exynos exploit & sds).
Click to expand...
Click to collapse
Thanks for you help,
I solved typing this command at dial pad.
*#7284# - Phone Util
change the configuration from modem to PDA, after that the phone didnt stuck anymore.
Best Regards

Primokorn said:
At first did u try to make a clean installation without user data?
If the problem persists you can flash a factory firmware: DOWNLOAD_N7100XXDLJ2_OXA_FACTORY. If you try this method don't forget to upgrade to a recent firmware. (protection against exynos exploit & sds).
Click to expand...
Click to collapse
I tried this image, but didnt work.
with and without teh pit file.
Anyway, I have installed the origianl firmware from my telecom comapny operator.
Best Regards
Robson Barros

[Q] Help! Note 2 bootloop, no recovery

Hey, so my note 2 (sgh-i317m variant) running 4.3 is stuck on the samsung screen and I cannot boot into recovery (it just stays at the samsung screen). What I believe caused this is the fact that I originally had it rooted, but flashed back to stock via odin to update to 4.3. Then I proceeded to re root it via odin and the cf auto root, however I forgot to factory reset before doing this. Now its stuck on the samsung screen and I cannot even get it into recovery mode. I can get it into download mode but whenever I try reflashing the stock rom (I have two different ones) neither of them work and Odin just displays "fail". I really dont know what else to do, hoping someone will know, thanks in advance.

Friend, try Google for KIES3. After installation under the Menu bar..look into something recoveries..
There you'll need to enter your model and serial no.
Boot your hp to DOWNLOAD MODE and plug to your usb. Then let KIES do its work.
Hope it helps

53N53L355 said:
Friend, try Google for KIES3. After installation under the Menu bar..look into something recoveries..
There you'll need to enter your model and serial no.
Boot your hp to DOWNLOAD MODE and plug to your usb. Then let KIES do its work.
Hope it helps
Click to expand...
Click to collapse
That didnt work

Mbrar15 said:
Hey, so my note 2 (sgh-i317m variant) running 4.3 is stuck on the samsung screen and I cannot boot into recovery (it just stays at the samsung screen). What I believe caused this is the fact that I originally had it rooted, but flashed back to stock via odin to update to 4.3. Then I proceeded to re root it via odin and the cf auto root, however I forgot to factory reset before doing this. Now its stuck on the samsung screen and I cannot even get it into recovery mode. I can get it into download mode but whenever I try reflashing the stock rom (I have two different ones) neither of them work and Odin just displays "fail". I really dont know what else to do, hoping someone will know, thanks in advance.
Click to expand...
Click to collapse
POST the complete ODIN log here.

...
Mbrar15 said:
Hey, so my note 2 (sgh-i317m variant) running 4.3 is stuck on the samsung screen and I cannot boot into recovery (it just stays at the samsung screen). What I believe caused this is the fact that I originally had it rooted, but flashed back to stock via odin to update to 4.3. Then I proceeded to re root it via odin and the cf auto root, however I forgot to factory reset before doing this. Now its stuck on the samsung screen and I cannot even get it into recovery mode. I can get it into download mode but whenever I try reflashing the stock rom (I have two different ones) neither of them work and Odin just displays "fail". I really dont know what else to do, hoping someone will know, thanks in advance.
Click to expand...
Click to collapse
Did you end up figuring it out?

[Q]: Custom Binary blocked by FRP Lock

Let me start by saying I'm new to the Samsung world, I've had HTC android phones ever since the first Hero. That being said, I was able to update my phone to 5.1.1 and use the mostly stock OF7 kernel my phone booted up the first time, starting installing some apps, then decided to reboot it. Now it just goes into the boot screen that say Samsung and in red letters up top it says "Custom Binary blocked by FRP lock". Looking back I know I should have unlocked the bootloader when I had it booted up, but I forgot. Every time I try to flash a stock kernel in Odin, it pops up with the same message, but just says "Custom Binary (Boot) blocked by FRP lock". Is there any way to get my phone to boot up again, or will I have to wait until it's possible to download the 5.1.1 firmware? Even when that download is available will I be able to fix it?
Thanks in advance.

Are you able to flash TWRP in Odin? If you can at least get to TWRP you should be able to flash a custom ROM like Sacs23.

leatherneck6017 said:
Are you able to flash TWRP in Odin? If you can at least get to TWRP you should be able to flash a custom ROM like Sacs23.
Click to expand...
Click to collapse
Thanks for the suggestion, but I've tried flashing TWRP in Odin and it fails and says "Custom Binary (Recovery) blocked from FRP lock".

Bummer. Are you using Odin 3.10.6? If so, then I'm stumped.

leatherneck6017 said:
Bummer. Are you using Odin 3.10.6? If so, then I'm stumped.
Click to expand...
Click to collapse
Sure am, I just hope that flashing the firmware download will work when it's available. Otherwise I guess I'm screwed

How about Kies? Long shot I know...

leatherneck6017 said:
How about Kies? Long shot I know...
Click to expand...
Click to collapse
Just tried Kies and still nothing, this sucks I hate how I can't leave my phones stock

i faced the same !steps you need to follow settings>search>reactivation lock>log in into Samsung account and disable

bhavstech said:
i faced the same !steps you need to follow settings>search>reactivation lock>log in into Samsung account and disable
Click to expand...
Click to collapse
Yeah that would work and I should have done that before I restarted, but I forgot, and now I'm unable to get past the boot splash screen, and can' t access the stock recovery, pretty much the screen I can get to is the Download screen

bbacon said:
Let me start by saying I'm new to the Samsung world, I've had HTC android phones ever since the first Hero. That being said, I was able to update my phone to 5.1.1 and use the mostly stock OF7 kernel my phone booted up the first time, starting installing some apps, then decided to reboot it. Now it just goes into the boot screen that say Samsung and in red letters up top it says "Custom Binary blocked by FRP lock". Looking back I know I should have unlocked the bootloader when I had it booted up, but I forgot. Every time I try to flash a stock kernel in Odin, it pops up with the same message, but just says "Custom Binary (Boot) blocked by FRP lock". Is there any way to get my phone to boot up again, or will I have to wait until it's possible to download the 5.1.1 firmware? Even when that download is available will I be able to fix it?
Thanks in advance.
Click to expand...
Click to collapse
bbacon said:
Yeah that would work and I should have done that before I restarted, but I forgot, and now I'm unable to get past the boot splash screen, and can' t access the stock recovery, pretty much the screen I can get to is the Download screen
Click to expand...
Click to collapse
Did you try the new TAT file of the 5.1.1. It's posted now on here. I had the same thing but I had Asurion insurance and they sent me a new device for $200 deductible.

Mig1234 said:
Did you try the new TAT file of the 5.1.1. It's posted now on here. I had the same thing but I had Asurion insurance and they sent me a new device for $200 deductible.
Click to expand...
Click to collapse
Yup I downloaded the firmware and flashed through ODIN and its all up and running great now. Thanks for the help

bbacon said:
Yup I downloaded the firmware and flashed through ODIN and its all up and running great now. Thanks for the help
Click to expand...
Click to collapse
sorry for the bother but am a bit new to all this. am faced with exactly the same problem. What TAT file are u guys talking about and where can i download it.

Saafir said:
They mean TAR and you can find it here as well as various other threads here on sammobile.com
Click to expand...
Click to collapse
Thanks for the clarification

i have the same problem too, frp lock. i cant do anything, stuck in logo

butterfan214 said:
i have the same problem too, frp lock. i cant do anything, stuck in logo
Click to expand...
Click to collapse
Which version were u on, 5.1 or 5.0

My sm-920T t-mobile Galaxy s6 is now stuck in a boot loop on splash screen
I flashed the new note 5 kernel and firmware that just came out to it and everything was working fine until I restarted my phone and now I'm stuck in just the Samsung Galaxy s6 boot screen can't access anything but download mode do any of you have any useful info or files I may be able to flash through odin to get through this because my phone is now essentially now a locked down brick that was working awesome right before I restarted it for the first time I forget the devs. name who put out the kernel and firmware for the note 5 to work on the s6 but this damned frp block/lock has made my fully paid for s6 I just got a doorstop now and I'm so frustrated anything I'm trying to flash on odin AP. is failing and I'm just so angry. Can someone please swoop in and give me some possibly useful advice so I can get my phone to boot because it was fine..... Till the restart because just one program was f/c but I would've eventually restarted anyway so I guess once I flashed it I was doomed. DEVS PLEASE. I know someone in here has to have had the same problem and conquered it. I've tried everything in my limited repertoire. Thanks alot for any responses. I was on normal 5.1.1 s6 firmware previous was just rooted with custom recovery

Getting the same frp error. Everthing I flash through ODIN fails. Even flashing stock 5.1.1 OF7 fails. I believe it's because I was on OGA so I have to wait until the tarball for that comes out I guess. Unless anyone else has some ideas?

Try using ODIN to reload the bootloader. Google the how, there are many posts.
Hope it helps. That's what I did to get mine to work.

same-ish stuffs
So I have a new s6 on a sprint plan. Was stuck in like a boot loop with the same message in nice red letters kept coming up on the load screen. I was on OGA and had just tried to implement TWRP via the playstore. This started the boot loop. after reflashing the original rootof7.tar i had managed to get it break-free with a factory reset on TWRP(which was now working), only to have the battery die before I had a chance to do anything. after I had got it on a charger it started with the charge battery icon and the red FRP lock message. It would basically just loop there going no further unless i tried to full reset(all buttons) or download mode. Could not flash anything via odin (only recieved error messeges). Took to Bestbuy and after some shuffling around(geeksquad is terribad) I managed to get the Samsung guy to flash a stock OF7 and it works fine now. No more root or twrp and the knox reads 0x1, bu the phone is working now

tupac unincorn said:
So I have a new s6 on a sprint plan. Was stuck in like a boot loop with the same message in nice red letters kept coming up on the load screen. I was on OGA and had just tried to implement TWRP via the playstore. This started the boot loop. after reflashing the original rootof7.tar i had managed to get it break-free with a factory reset on TWRP(which was now working), only to have the battery die before I had a chance to do anything. after I had got it on a charger it started with the charge battery icon and the red FRP lock message. It would basically just loop there going no further unless i tried to full reset(all buttons) or download mode. Could not flash anything via odin (only recieved error messeges). Took to Bestbuy and after some shuffling around(geeksquad is terribad) I managed to get the Samsung guy to flash a stock OF7 and it works fine now. No more root or twrp and the knox reads 0x1, bu the phone is working now
Click to expand...
Click to collapse
can you tell me which stock rom did you use please.

tmobile galaxy s6 edge g925t, missing OS. HELP!!!

I recently rooted my galaxy s6 edge g925t and was successful, but i couldn't stop there, i wanted to upgrade to android 6.0. i spent hours searching for a custom ROM/firmware and found one that i thought would work. I installed that custom OS through TWRP installer. After i finished the installation i tried to restart the phone but it just stayed at the "Samsung Galaxy S6 EDGE" boot logo and didn't play the boot animation. I searched online for ways of unbricking the phone and i eventually got to the recovery mode and tried to wipe the internal storage. then i restarted the phone and was back to the same Samsung logo. I again tried to get back to the recovery mode, but this time i did an advanced wipe and i ended up deleting the OS. if tried installing the stock ROM/firmware via Odin but can't get it to work. Is there anything i can still do? Can anyone please help me?

What happens when you try and flash the Odin image? The Rom you flashed, did that flash a new bootloader or firmware? If so it might have messed up the partitions on the phone.

M9x3mos said:
What happens when you try and flash the Odin image? The Rom you flashed, did that flash a new bootloader or firmware? If so it might have messed up the partitions on the phone.
Click to expand...
Click to collapse
The phone doesn't accept that either.

What custom ROM did you install? And what stock ROM did you try to ODIN flash?

Also, what is happening when you do that. I gathered out didn't work, but what error comes up?

zabrador said:
What custom ROM did you install? And what stock ROM did you try to ODIN flash?
Click to expand...
Click to collapse
TyrannusRomV23.1.zip is the custom rom, and SM-G925T_1_20150327095252_d1ygbqk7km (1) is the name of the stock i tried.
also the error that ODIN shows is that it FAILed and the phone shows in red letters in the top corner "check fail. DEVICE: 3, BINARY: 1
i dont know the entire message from the phone b/c my screen is blacked out in the top corner, but thats what i can see.

micahtjosaas said:
TyrannusRomV23.1.zip is the custom rom, and SM-G925T_1_20150327095252_d1ygbqk7km (1) is the name of the stock i tried.
also the error that ODIN shows is that it FAILed and the phone shows in red letters in the top corner "check fail. DEVICE: 3, BINARY: 1
i dont know the entire message from the phone b/c my screen is blacked out in the top corner, but thats what i can see.
Click to expand...
Click to collapse
Yeah, I don't think TyrannusRom is runnable on a G925T :/
Flashing stock with ODIN should do the trick. It's hard to tell where that stock file is from, so I would try to download the latest directly from SamMobile here (this is specifically for the G925T). If it's still not working, copy/paste the error ODIN is giving you here if you can.
Also, this thread seems to suggest you might be able to just re-flash the bootloader.

THANK YOU so much!!! that worked, iv looke on sammobile before but couldn't get anything to work, thanks so much

micahtjosaas said:
THANK YOU so much!!! that worked, iv looke on sammobile before but couldn't get anything to work, thanks so much
Click to expand...
Click to collapse
No problem! Glad you're back up and running

Erase some apk with adb and stuck on reboot

Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you very much for you help.

dr.rokr said:
Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you
Click to expand...
Click to collapse
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.

TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tried the 3 USB ports in the laptop
What else can be happening?
Thank you very much!

dr.rokr said:
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tryed the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
Click to expand...
Click to collapse
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.

bruno2030 said:
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
Click to expand...
Click to collapse
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do

dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
go to the recovery.
connect to the PC.
open odin.
click on "reboot to bootloader"
It should go to to download mode.
what does your download mode screen say?
When I was doing this process I tried reflashing the latest rom but that didn't solve my boot loop issue.
So I flashed an older version of the rom.
Make sure the version you download is compatible with your phone.
You have G9650ZHU9FUG2 so only roms with 9 will work.
I flashed that old version and it didn't work, phone still stuck.
Then I flashed the latest one again and then my phone worked.
I used odin from the link you posted.
Odin3 v3.13.1

actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it

dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
TormentedHeart said:
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
Click to expand...
Click to collapse
Hi! I have uninstalled everything and then install the drivers again without luck

TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! Today I have successfully flashed the exact firmware that the phone had ( there is no newer) using a different laptop (it's true if the problem persist with Odin, use another laptop)
I got success message, at the very first time, and when the phone reboot, nothing , stuck as it was before, so I erased cache partition and no luck, still stuck on reboot, I have also tried repair apps , and reboot sistem now, what else should I do?
Thank you very much!

Hi! I want the community to know that using the APK adb app for Samsung it's a bad idea, after successfuly flashing the firmware and performing a factory reset several times the phone remain stucked, I downloaded about 10 different firmwares and flash them all times without an error, and the phone was bricked and stuck in boot. So I took it to the official service and nothing, still the same, then I found an external service that flash the device with a little box that they said they paid in advance for credits for using that box, it took them one full week to revive the phone, also they had to flash it several times. In conclusion, if you buy Samsung, stick with the garbage apps the throw, if you mess with the system in some way as the official technician said, the phone will be nearly unrecoverable for privacy benefits for the user. Thank you very much for the help to the community!