Related
Hi Community,
I have the M2 since a few month and I'm still looking for a working root method. So far I've tried Kingroot and the official way via Huawei-Support, but they couldn't give me the code because I cannot find the Product ID of the M2 (Mine is wifi only, no dialer -> no chance to "dial" the code to get the product ID).
I read through the forums here and some chinese forums and it seems like it is possible, to use the TWRP for the X2 for the M2 as well. But of course I need to unlock the bootloader in order to be able to flash that.
Is anyone of you aware of any working root or unlock method for the M2-801W?
Any hint is greatly appriciated. Thanks in Advance!
Tested srsroot as well without success even though it says it is supported. It patches the system and reboots - but su binary isn't there after the reboot.
FRP Protection is disabled in developer options (OEM Flashing -> Enabled), Bootloader says FRP Protection is not active
tb2009 said:
Tested srsroot as well without success even though it says it is supported. It patches the system and reboots - but su binary isn't there after the reboot.
FRP Protection is disabled in developer options (OEM Flashing -> Enabled), Bootloader says FRP Protection is not active
Click to expand...
Click to collapse
Thanks für keeping us posted. I'm also desperately searching for an unlock solution.
Regards
tb2009 said:
Hi Community,
I have the M2 since a few month and I'm still looking for a working root method. So far I've tried Kingroot and the official way via Huawei-Support, but they couldn't give me the code because I cannot find the Product ID of the M2 (Mine is wifi only, no dialer -> no chance to "dial" the code to get the product ID).
I read through the forums here and some chinese forums and it seems like it is possible, to use the TWRP for the X2 for the M2 as well. But of course I need to unlock the bootloader in order to be able to flash that.
Is anyone of you aware of any working root or unlock method for the M2-801W?
Any hint is greatly appriciated. Thanks in Advance!
Click to expand...
Click to collapse
I found a youtube video with the title HUAWEI MEDIAPAD M2 UNLOCK USING FURIOUSGOLD.
There it is shown that you have to go to the calculator and type in ()()2846579()() and then =. (Tablet must be in landscape mode to get the parenthesis.) This opens the project menu where I found my IMEI, although I do not understand why my WIFI only tablet has one. Anyway, it was the same as the serial number.
For the product ID I tried the same procedure: Calculator -> ()()1357946()() and then =. Shows an 8-digit number.
I then went to the Huwai site for the unlock key. After pressing the submit button, I get 'SN and IMEI are mismatched.' I will contact Huawei about this error.
Does this work for anybody else?
included_triangulum said:
I found a youtube video with the title HUAWEI MEDIAPAD M2 UNLOCK USING FURIOUSGOLD.
There it is shown that you have to go to the calculator and type in ()()2846579()() and then =. (Tablet must be in landscape mode to get the parenthesis.) This opens the project menu where I found my IMEI, although I do not understand why my WIFI only tablet has one. Anyway, it was the same as the serial number.
For the product ID I tried the same procedure: Calculator -> ()()1357946()() and then =. Shows an 8-digit number.
I then went to the Huwai site for the unlock key. After pressing the submit button, I get 'SN and IMEI are mismatched.' I will contact Huawei about this error.
Does this work for anybody else?
Click to expand...
Click to collapse
Works for me as well. Got also an error message on the huawei unlock side saying "The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days."
Edit: Furios Gold is a sim unlock tool. We need a bootloader unlock tool!
Thanks
It is actually possible to unlock the bootloader just fine, did it on mine. The option 3 on http://forum.xda-developers.com/med...apad-x2-unlock-bootloader-root-guide-t3212325 ie. using DC-unlock and then "fastboot oem unlock xxxxxxxxxxxxxxxx" using adb works. I have not tried the TWRP meant for X2 on the M2, but as far as I have understood it should work.
WereCatf said:
It is actually possible to unlock the bootloader just fine, did it on mine. The option 3 on http://forum.xda-developers.com/med...apad-x2-unlock-bootloader-root-guide-t3212325 ie. using DC-unlock and then "fastboot oem unlock xxxxxxxxxxxxxxxx" using adb works. I have not tried the TWRP meant for X2 on the M2, but as far as I have understood it should work.
Click to expand...
Click to collapse
Thank you for sharing that information - unfortunately it is not working for me, DC unlocker fails to detect the tablet. I followed the instructions carefully, all drivers are present as described on dc unlocker page. I tried it in a windows VM and on HW, doesn't work for me.. (I tried autodetect huawei phone and Mediapad X2 directly)
Do you have the LTE or the wifi version? Has anyone managed to unlock the wifi only version?
tb2009 said:
Do you have the LTE or the wifi version? Has anyone managed to unlock the wifi only version?
Click to expand...
Click to collapse
I have the LTE-version, so that's probably why it worked for me.
I just wanted to let you know, that I was able to root the device with the latest kingroot apk
tb2009 said:
I just wanted to let you know, that I was able to root the device with the latest kingroot apk
Click to expand...
Click to collapse
Thanks, I will try that
tb2009 said:
I just wanted to let you know, that I was able to root the device with the latest kingroot apk
Click to expand...
Click to collapse
does not work for me.
Is there difference between m8, m10 wifi & lte?
well kingoroot didn't work for me i have the m2 8.0 on lollipop 5.1.1
latest kingroot is not working for me as well.. any other suggestions? thank you in advance.
crazybone21 said:
latest kingroot is not working for me as well.. any other suggestions? thank you in advance.
Click to expand...
Click to collapse
Do you have 8, 10 lte or wifi?
I have mediapad m2-801L.
I have rooted my phone already by following the guide in mediapad x2.
Well that's good that there is alternative method if kingroot doesn't work.
A. Please go to this link: here
B. I have used DC Unlocker to unlock my bootloader (costs €4) and it can directly unlock the mediapad by using their app. Please click here
C. I flashed the TWRP in the link above using fastboot.
D. I flashed the SuperSU found in the same link above and done! Mediapad M2 is rooted now.
Do you know Iif it's possible to root without unlocking bootloader? do we loose anything if bootloader is unlocking.
I have xperia z5c and I don't want to unlock bootloader because some features will be disabled
Kingroot worked for me (latest version, APK run directly on the tablet)
I have the 802L Wifi only on 5.1.1, Kingroot said that there is no root method available, but I was able to continue and got root.
Previously, i had disabled the FRP Protection (Developer Options -> Enable OEM flashing)
DC Unlocker worked for me as well - the Mediapad 8.0 seems to be supported now in the latest version. You need to set your device to manufacturing mode (open the calculator, turn the tablet around to see it in landscape mode, type ()()2846579()() and =
then, from the background service menu, select USB Options -> Manufacturing mode.
You need to install the driver package from this page: https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
After the bootloader was unlocked, I was able to flash TWRP (the chinese version for the X2) and an english language pack (just place the ui.zip in TWRP -> theme folder on the tablet) - SuperSU worked as well, I'm having some trouble with xposed, sometimes it is working, sometimes it's not.
Hi guys,
So, i did have an Android phone before but its kinda blurry how the whole rooting/twpr/custom rom thing works. Is there somebody here who can provide me the right links/downloads/tutorial how to step by step flash a custom rom to my Mi6? Maybe we can chat via slack, chat, messages etc. Thanks in advance!
KaiseRRUby said:
Hi guys,
So, i did have an Android phone before but its kinda blurry how the whole rooting/twpr/custom rom thing works. Is there somebody here who can provide me the right links/downloads/tutorial how to step by step flash a custom rom to my Mi6? Maybe we can chat via slack, chat, messages etc. Thanks in advance!
Click to expand...
Click to collapse
First all of you have to unlock your bootloader , just Google the xioami unlock tool, then create an account ,after that you will have to make a request to xiaomi unlocking your bootloader maybe after 1-days your good to go , to unlock bootlook you have to enable developer options on your phone by tapping the build version on settings-about phone / then after that click on oem unlocking then go to - device status - click on add device -enter your xiaomi account- connect your phone to PC and that press and hold powe+vol up button to enter fastboot mode and oh ! O need to install also xioami drivers first to your PC before connecting it , after that fastboot thing you will see your phone on mi unlocking app then click on unlock device then viola , after unlocking you need to install custom recoveries like the famous TWRP then next step is rooting after you install twrp just flash the superSu binaries or majisk
Just Google it my friend I'm you can do it I'm lazy in explaining step by step sorry
January 2023 Edit: The guide below is now outdated. The technique still works, but some of the steps have changed, and may not reflect your experience when rooting. Proceed with caution.
Hello XDA. I have spent the past couple of weeks struggling with unlocking and rooting this awesome device. After some researching I have decided to put this guide together after stumbling on a lot of fake guides on Google that don't work for the Honor 8x. I hope this helps you!
Step 1: Purchase a bootloader code.
Unfortunately, since Huawei stopped providing unlock codes, there is no way around this requirement. Some older guides suggest DC Unlocker, but this does NOT work with newer Huawei devices, and there are no known exploits to get around this. I have provided some options below (which have been tested by XDA members). All you need to do is provide them your IMEI, which can be found under Settings > System > About Phone.Ministry of Solutions: https://ministryofsolutions.com/202...-unlock-service-jsn-l21-jsn-l22-jsn-al00.htmlFunkyHuawei: https://funkyhuawei.club/buycodes [No longer providing service]Global Unlocking Solutions: [Website gone - 404 Error]Various eBay sellers: https://www.ebay.com/sch/i.html?_from=R40&_nkw=huawei+bootloaderAlternate solution: Try asking a Huawei Service center near you. https://www.androidauthority.com/honor-india-bootloader-unlocking-933231/Confirmed working at some locations outside of Asia.
Step 2: Download ADB.
Link here: https://dl.google.com/android/repository/platform-tools-latest-windows.zipAnd unzip it to somewhere on your computer.
Step 3: Setup your phone
Go to Settings > System > About Phone, and tap "Build Number" 7 times to unlock Developer mode. Go back to System, and tap Developer Options. Enable OEM Unlock and USB Debugging.
Step 4: Unlocking your device
Connect your phone to your PC via USB. Make sure you select "Transfer files" when the message pops up on your phone, and select Trust this computer when the debugging warning pops up. Open your ADB folder, hold Shift and right-click, then select "Open Powershell window" or "Open command prompt". In the next window, type "adb devices" and make sure your device is listed (If not, check to make sure USB debugging is enabled, or reconnect the USB cable.)After that, type "adb reboot bootloader". Once that is done, type "fastboot oem unlock xxx" (replace xxx with the unique code you purchased in Step 1). Warning! This will format your phone and return it to stock configuration. Your phone now has an unlocked bootloader!
Step 5: Install Magisk Manager.
Download and install the Magisk Manager app on your phone. APK here: https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.1/MagiskManager-v6.0.1.apk
Step 6: Flashing twrp and Magisk
Download the latest twrp image: https://dl.twrp.me/kirin/ and place it into your ADB folder.Then download this magisk ZIP: https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip and place it on a spare Micro SD card, and put that card in the device.Reconnect your device to the PC, again open a Powershell/Command Prompt (as in Step 4).Type "adb reboot bootloader", then type "fastboot flash recovery_ramdisk twrp-kirin.img". This should complete successfully. Turn off your device by holding down the power button.Disconnect the phone from USB (do not skip this part otherwise you are unable to boot into recovery). Then hold "Volume UP" and "Power" until the blue Honor logo shows up. Release both buttons. You should see a Teamwin logo and twrp will load.This version of twrp is a work in progress so the touchscreen does not work (this is currently being worked on by the folks at twrp builder https://twrpbuilder.github.io/. As soon as they fix it, I will update this guide!). A temporary fix is by using an OTG Cable https://images-na.ssl-images-amazon.com/images/I/51HI4XhstKL._SX425_.jpg and a standard USB mouse. Use it to swipe-right and select "Install". You might need to "Select storage" and choose your SD card. Find the Magisk zip and install it, then reboot.
Your Honor 8x phone is now rooted!
If this guide was helpful, please consider donating! Bitcoin: 1FPzDYUrQmQMrHbv2ZeAEe883KVNZ8zPV4
Thanks.
Edit: I will provide some instructions below if you wish to do a ota update to a newer version of EMUI (one of which was released recently for the Honor 8x).
* The root must be removed, and phone restored to factory stock before doing a ota update. The bootloader will remain unlocked (no change).
* Stock factory firmware currently can be restored in the Huawei eRecovery by restarting your phone, then on the "Your device has been unlocked" screen, press "Up" for three seconds. From here, you can download the latest version (This will format the phone). After updating, you must re-root from Steps 3 to 6 above (you can skip step 4).
* There should be an easier method to update without formatting, but the current version of twrp causes issues if you try and flash the update. (Error 9, as reported by some users)
I will update the guide when this is fixed.
I have been warned that this may not work for a Qualcomm chipset. Will update if there is any further information about that.
Honor 8x, 4/128. Kirin 710. Global Unlocking Solutions - 4 hours waiting and bootloader unlocked
Mikey_AK said:
I have been warned that this may not work for a Qualcomm chipset. Will update if there is any further information about that.
Click to expand...
Click to collapse
To my knowledge, only the 8x Max has a Qualcomm chipset. All of the regular 8x devices have a Kirin one.
chickenwingding said:
To my knowledge, only the 8x Max has a Qualcomm chipset. All of the regular 8x devices have a Kirin one.
Click to expand...
Click to collapse
I have an 8X Max. Only posting this as a warning to anyone else who might have one.
chickenwingding said:
This version of twrp is a work in progress so the touchscreen does not work (this is currently being worked on by the folks at twrp builder https://twrpbuilder.github.io/. As soon as they fix it, I will update this guide!).
Click to expand...
Click to collapse
Interesting to see a TWRP build for the new Kirin 710. @chickenwingding Do you think that they will be able to make Nova 3i a TWRP build too? I still didn't unlock it, but I'm going to do it soon, and I've never ported recoveries before, and because this is my first Kirin device I would like some help regarding that. But looking at the log of their app it looks like they reject Huawei/Honor devices now. How did you get them to build Honor 8X TWRP?
New in Huawei devices
I have an Honor 8x Chinese version, once I completed this tutorial could I change the region to my terminal flashing a European rom?
Thanks for the post.
I purchased my honor 8X (AL00a) from China and its developer page doesn't have "OEM Unlock" option. It is not there... Believe me... So, even if I can get an unlock code, I will not able to unlock it. Right? Do you know any solution about that? Huawei closed all ways I guess...
Supersonic27543 said:
Interesting to see a TWRP build for the new Kirin 710. @chickenwingding Do you think that they will be able to make Nova 3i a TWRP build too? I still didn't unlock it, but I'm going to do it soon, and I've never ported recoveries before, and because this is my first Kirin device I would like some help regarding that. But looking at the log of their app it looks like they reject Huawei/Honor devices now. How did you get them to build Honor 8X TWRP?
Click to expand...
Click to collapse
The Nova 3i uses the same SoC as the Honor 8x, so the same recovery image might work for it. And the twrp builder group don't do Huawei/Honor anymore because the company stopped providing bootloader unlocks, so it's very difficult (and expensive) for new owners to root their phone. They said it's not worth developing for newer Huawei devices anymore. The reason they did it for me was because I promised them a cash donation.
Are custom Roms even being developed for this device?
tomdmca said:
Are custom Roms even being developed for this device?
Click to expand...
Click to collapse
Not really. It's the same story for all new Huawei/Honor devices, since they stopped supporting bootloader unlocks.
chickenwingding said:
Not really. It's the same story for all new Huawei/Honor devices, since they stopped supporting bootloader unlocks.
Click to expand...
Click to collapse
And if we made a donation to openkirin ?
Wilcur said:
Honor 8x, 4/128. Kirin 710. Global Unlocking Solutions - 4 hours waiting and bootloader unlocked
Click to expand...
Click to collapse
Excuse me, do you know why to give you unlock bootloader code they ask your phone number, your home address as well as second IMEI number? It's really necessary? Thank you
Second IMEI number is required to generate unlock code. Other... I write fake address etc ,?
Wilcur said:
Second IMEI number is required to generate unlock code. Other... I write fake address etc ,
Click to expand...
Click to collapse
:good:
Why to install MagiskManager-v6.0.1.apk before unlock bootloader?
Normally when you unlock the bootloader all apps will be removed ...
Thank you
pol.bob said:
Why to install MagiskManager-v6.0.1.apk before unlock bootloader?
Normally when you unlock the bootloader all apps will be removed ...
Thank you
Click to expand...
Click to collapse
Thanks, I had them in the wrong order. I fixed the guide now. :good:
LTE Europe network.
Hello, i bought on ebay Honor 8x 6/128 JSN-AL00 which is not avalible in Europe(Poland)-here we got only 4/128. Im waiting for package from China. In Europe(Poland) there is LTE frequency B1(2100) and B3(1800+). Can i do something with the smartphone from China to unlock this frequences in my new Huawei Honor 8x? Is there some options to turn it on after rooting? Thx for answer. Best regards Paul.
PaulJin said:
Hello, i bought on ebay Honor 8x 6/128 JSN-AL00 which is not avalible in Europe(Poland)-here we got only 4/128. Im waiting for package from China. In Europe(Poland) there is LTE frequency B1(2100) and B3(1800+). Can i do something with the smartphone from China to unlock this frequences in my new Huawei Honor 8x? Is there some options to turn it on after rooting? Thx for answer. Best regards Paul.
Click to expand...
Click to collapse
I would like to know this too...I have the same phone and would like to unlock frequencies.
Ok I read and understand this guide but after the step 6 what I should do for rebrand my Chinese rom with an European rom?
I have one Moto Z2 Force (XT1789-05), bought from coolicool.com, I didn't know device came Unlocked Bootloader, Device rom had problem with many apps, I googled and found one topic in XDA developer to Install Stock Rom, I downloaded and Installed India Rom, it's worked somehow fine, but still had problem, I downloaded Verizon Rom, Android 8, after Installed Android 8 Verizon Rom, Locked device bootloader immediately, now device stuck at Welcome Wizard in Android 8, after select language I got this message: (Please wait, this may take a few minutes) this is proof video (http://ahmn.co/Upload/IMG_0161.MOV), after this issue, device already locked, I can't unlock, because need to go to the Developer Option in Setting, I stucked in Welcome Wizard, there isn't any bypass, So, I start to search in Google, XDA-Forum, Android Central and more, I created many threads, many requests, no one can't help me, I tried to reach google developer support to the tell to me how can I bypass Android 8 Welcome Wizard, there is must be a way, but I can't find it, now I can access to Android Recovery and Bootloader
1. if you help me to FORCE UNLOCK device without need Developer Option in setting my problem will solve
2. If you help me to Bypass Android Welcome Wizard, access setting and enable OEM Unlock
3. If you help me to update the device from Android 8 to Android 9 Verizon ROM via ADB Sideload or Update from SD card in Recovery mode
4. If you have any idea to how can I fix it
Extra Information: I bought Belkin and Uni USB-C to Ethernet Adaptor to help me bypass Android 8 Welcome Wizard, I bought WSKY WIFI Adaptor because device Wifi can't find any network (I found QR setup by tap several times in Language Selection), after this section need to download google device policy apk, my device can't find any Wifi Network and my Ethernet Adaptor can't help me either, So, I just remained with my phone, and I can't do anything,
Please, someone, help me
My Device SKU: XT1789-05
These coolicool phones always come with the wrong firmware install, the simple solution to that is to flash the correct firmware which is plain old RETAIL. Solved. That's for anyone who might have or end up with one of these phones.
As for your phone and since you're in the situation you are I'd flash VZW pie. That isn't the correct firmware for your phone, but you've got a locked BL with VZW on it now and nothing is working. Since your ultimate goal is to flash pie anyways, that's what I'd do. Maybe that will clean up your system enough to enable oem unlock. If you can get your BL unlocked, then you're half way there. Surely by now you've realized that you haven't got many if any options.
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Yes, I put my self in prison by locking bootloader, I already downloaded this firmware, but how can I update this firmware via ADB Sideload or Micro SD?
as you know bootloader locked and there isn't a simple way, with locked bootloader I can't flash this file, (Remote Failure) error
thanks a lot
41rw4lk said:
These coolicool phones always come with the wrong firmware install, the simple solution to that is to flash the correct firmware which is plain old RETAIL. Solved. That's for anyone who might have or end up with one of these phones.
As for your phone and since you're in the situation you are I'd flash VZW pie. That isn't the correct firmware for your phone, but you've got a locked BL with VZW on it now and nothing is working. Since your ultimate goal is to flash pie anyways, that's what I'd do. Maybe that will clean up your system enough to enable oem unlock. If you can get your BL unlocked, then you're half way there. Surely by now you've realized that you haven't got many if any options.
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Hello, anybody?????
There is any way to Upgrade Android 8 to Android 9 with locked bootloader?
My Device state: flashing_locked
is it possible to FORCE UNLOCK?
or is it possible to open hardware device and make it force unlock?
please help me,
someone?
solution
I need help, PLEAAAAAAAAAAAAAAAAAAAASSSSSSSSSSSSSEEEE
Have you tried using Lenovo moto smart assistant?
Leonardoliveira said:
Have you tried using Lenovo moto smart assistant?
Click to expand...
Click to collapse
Yes, I did, not work
Hi, could you solve your problem? I have a moto xt1789-05 with the bootloader locked and it doesn't allow me to start the developer options. I'm looking for a solution if you could?
gamc01 said:
Hi, could you solve your problem? I have a moto xt1789-05 with the bootloader locked and it doesn't allow me to start the developer options. I'm looking for a solution if you could?
Click to expand...
Click to collapse
You need to elaborate. Is oem unlocking grey out? Are you signed into google services? Do you have wifi and/or radio?
gamc01 said:
Hi, could you solve your problem? I have a moto xt1789-05 with the bootloader locked and it doesn't allow me to start the developer options. I'm looking for a solution if you could?
Click to expand...
Click to collapse
I couldn't do anything, I just send to Motorola repair and they change mainboard
sorry, I didn't find any solution
Ok I'll keep looking for some solution thanks
---------- Post added at 04:27 AM ---------- Previous post was at 04:13 AM ----------
41rw4lk said:
You need to elaborate. Is oem unlocking grey out? Are you signed into google services? Do you have wifi and/or radio?
Click to expand...
Click to collapse
thank you for responding 41rw4lk, what happens is that I can not access because it does not pass from the logo of motorola then it restarts when i try flash whith the retail version of brazil, but when i flash whith the versions at&t oreo or amx of telcel when turning on the moto I get the message your device is corrupt it cant be trusted and will not boot. I have seen some videos In which it has worked but not specify the bootloader status
gamc01 said:
Ok I'll keep looking for some solution thanks
---------- Post added at 04:27 AM ---------- Previous post was at 04:13 AM ----------
thank you for responding 41rw4lk, what happens is that I can not access because it does not pass from the logo of motorola then it restarts when i try flash whith the retail version of brazil, but when i flash whith the versions at&t oreo or amx of telcel when turning on the moto I get the message your device is corrupt it cant be trusted and will not boot. I have seen some videos In which it has worked but not specify the bootloader status
Click to expand...
Click to collapse
You shouldn't flash firmware from other variants like att, etc. However, if you're able to flash those firmwares and not get any permission denied errors then your bootloader is unlocked, which is good. If you have NOT flashed a pie firmware, good, do NOT do it until everything is up and running and you're sorted. If you have, then you'll need to use pie firmware to fix it since once you flash a pie modem there is no going back to an oreo modem.
Run this command from bootloader/fastboot mode and post back your output.
PHP:
fastboot getvar all
You can omit your imei and your serial no. for privacy.
Hi, I have a Lenovo P2 (P2a42), 64gB, Stock ROM Android 7.0 and I want to unlock the bootloader.
I have gone through the two week wait for the process to become possible.
I have done:
Allow OEM Unlocking? Enable
Continue to unlock Bootloader? OK
Agree to terms and conditions etc? Ticked the box, Next
I get "Server synch data success", and a "Next" button, but it's greyed out.
I've been through this process four times previously on four different Lenovo P2 phones but "Next" has always been available and I've always unlocked and flashed custom ROM with no problems.
Can anyone suggest a reason it is greyed out this time please?
Thanks for any help.
Simon.
EDIT:
On the advice of a discussion on a different forum I created a new Lenovo account and the "Next" became available. It's all sorted now with unlocked bootloader and freshly flashed ROM.