Develop Bugs

[Q] MTP not working after jelly bean update

Hi, So I have the sg3 T999V with Wind and I updated to jelly bean via kies today.
So I did lose root and cmw
but I used the root66 way of rooting it after the upgrade and it worked.
However, after the upgrade I encounter the MTP device not working problem.
I first unchecked usb debugging mode and it worked for a brief moment but then proceeded to not being recognized by my computer again
I have windows 7 32bit
So this is what I tried:
1) regedit described on this forum - did not work, and there was no upperfilters under EEC5AD98-8080-425f-922A-DABF3DE3F69A
2) reinstall kies,driver under my computer-manager, and kies troubleshooting - always returned with MTP not installed correctly
3) factory reset one where I signed into google account right away when prompt and another left it till later, the instance where i signed in later worked until i restored system-app data with titanium backup
4) Tried all the ports on my laptop- non of which worked
5) made sure I used the usb cable that came with the phone
So I am out of ideas and having tried most of the methods suggested on the forum I don't have a next step
the reset worked well till I backed up with titanium so perhaps it is a system setting that is preventing the mtp?
Please help I use my sg3 as a music player for my long commutes and losing the MTP function would be major. :crying:

HolySafari said:
Hi, So I have the sg3 T999V with Wind and I updated to jelly bean via kies today.
So I did lose root and cmw
but I used the root66 way of rooting it after the upgrade and it worked.
However, after the upgrade I encounter the MTP device not working problem.
I first unchecked usb debugging mode and it worked for a brief moment but then proceeded to not being recognized by my computer again
I have windows 7 32bit
So this is what I tried:
1) regedit described on this forum - did not work, and there was no upperfilters under EEC5AD98-8080-425f-922A-DABF3DE3F69A
2) reinstall kies,driver under my computer-manager, and kies troubleshooting - always returned with MTP not installed correctly
3) factory reset one where I signed into google account right away when prompt and another left it till later, the instance where i signed in later worked until i restored system-app data with titanium backup
4) Tried all the ports on my laptop- non of which worked
5) made sure I used the usb cable that came with the phone
So I am out of ideas and having tried most of the methods suggested on the forum I don't have a next step
the reset worked well till I backed up with titanium so perhaps it is a system setting that is preventing the mtp?
Please help I use my sg3 as a music player for my long commutes and losing the MTP function would be major. :crying:
Click to expand...
Click to collapse
I have this issue on and off with my S3. It tells me my Device ID is missing. What I do is the following:
1. Download the S3 Toolkit software http://forum.xda-developers.com/showthread.php?t=1746682 and extract
2. Go to the directory you put the toolkit in and look for the drivers folder. There are two (maybe 3) files there. The USB drivers, and an application. Right click on the application, and run as administrator.
3. Make sure phone is NOT plugged in
4. Look for all Samsung related files. You may have USB component, USB modem, CAC Driver, MTP Driver, ADB driver, And a T999 Driver. highlight and click the recycle bin next to teh X on the menu bar.
5. Plug phone in, and let it recognize the components again.
6. After it is complete, it may work, or you may have to plug it in one more time for it to recognize T999 or MTP again.
7. If it doesn't work, start again, sometimes it takes a few times.
I do notice that with the Universal Naked drivers I don't have any issues, but then I can't connect to Kies. Also curious to see if your Device ID is also missing, this is the first column in the application you are running. Mine are, which I think is part of the problem, but not sure why they vanished, or how to get them back.

I don't have a solution for your windoze problem
but if I understand correctly, you need to transfer files from pc to phone
you have wifi?
both pc and phone using same wifi?
on pc.. open sharing to LAN
get ES File Explorer (or similar) from the play store
in ES, switch from Local to LAN shares
tap New.. then Scan ... your pc should show
tap it and hold, edit login parameters as necessary
tada ... now you can move files from pc to sdcard or ext sd card, no prob .. Local to LAN or vice versa
tip: I opened the 5GHz band on My dual band router and have My SGS3 connect on that band ... this achieves speeds up to 150Mbps between pc and phone instead of usual max of 65Mbps on 2.4GHz band
another file transfer method ... Dropbox
drop files on pc into Dropbox, pick them up in the Dropbox app.. or vice versa
however this will use your internet .. and whatever your monthly limit is ... twice!
once to transfer from pc/phone to Dropbox server... second time back from Dropbox server to phone/pc
the first method using wifi LAN doesn't use your internet, not limit, at all

[Q] Cannot initiate USB data connection on GS3 (rooted, CM10; Win 7)

A few weeks after rooting and installing CM10 on my GS3, it stopped recognizing any form of USB data connection. It still charges from both computer and wall adapter, but I cannot initiate a data transfer or recognize my device using ADB.
I have tried:
three different OEM Samsung cables (from SG3/SG4 phones)
all the ports on two different Win 7 laptops
all the ports on an Ubuntu desktop
enabling or disabling USB debugging
with different combinations each time. No "USB connection" dialog has shown up on the phone, and no "new device" dialog has shown up on any of the computers. I know that I can get ADB working with a different Android phone (HTC Inspire 4G) so I know that my main laptop has USB ports that work and the cables I've tried work as well, so I'm left to assume that the issue is with the GS3. External visual inspection does not suggest the USB port on the phone is damaged, and the phone is only a year old, so I don't believe that is the cause.
Is there a system setting that I may have modified on the GS3 that would disable all forms of USB communication?
(The end goal is to get at least ADB working so I can try and recover some deleted files from the internal memory; I haven't found a reliable method that does not require ADB so I'm trying to get that to work. I know that transferring files on or off can be accomplished with the external SD card or over Wifi but that is not what I'm looking for)

Any suggestions from anyone?

I am not sure. Could be a software issue. I would try backing up your current cm ROM and try installing a fresh touchwiz ROM to see of that works, to rule out software issues. This could also be a android 4.3 issue. Could try stickmount or a similar otg app from the market.
Sent from my Nexus 7

stelv said:
I am not sure. Could be a software issue. I would try backing up your current cm ROM and try installing a fresh touchwiz ROM to see of that works, to rule out software issues. This could also be a android 4.3 issue. Could try stickmount or a similar otg app from the market.
Sent from my Nexus 7
Click to expand...
Click to collapse
I don't think any OTG app like stickmount will help; I'm not trying to connect devices to my phone. I'm trying to get my computer to recognize my phone (and vice versa) in order to get ADB working.
If I can avoid flashing a RAM I'd like to, because I'm still interested in recovering those deleted files. If that is the only thing that would help, though, then I'll do it. Any other suggestions?

Install Kies and that should get the drivers for the pc in place. Odin should recognize the device when it is in the download mode. If that works, then the pc to phone connection is OK and I'd look to software instead of hardware.
Or, if you boot into your custom recovery, either CWM or TWRP, you should be able to get ADB to recognize the device and issue commands including pulling the files on Internal storage. TWRP also has a file browser built in that might be useful.

I have tried uninstalling any Samsung drivers then using the SGS3 toolkit to install the official drivers, but that didn't change anything on the PC end.
Additionally, I tried finding my device while it was in recovery using ADB and there was no connection indication either.
I currently have CWM installed, but I didn't see a mounting option like I've seen for TWRP. Can I flash TWRP without a computer?

Or try this out: Download mode>Connect via USB>Let Windows download and update all drivers until the notification in the bottom right says it's ready to use>Unplug>Battery Pull>Boot normally>connect again. Voila! It works every time when it's being wonky and its a simple way that doesn't require a bunch of downloads!

installing insecure adb might help

Rebooting into download mode does nothing.
I believe rooting and installing CM10 means I already have insecure adb?

thanks
thanks

what next?
aEx155 said:
Rebooting into download mode does nothing.
I believe rooting and installing CM10 means I already have insecure adb?
Click to expand...
Click to collapse
I have this same issue, in download mode, the device is still not connecting.
what is the next step? I have followed this thread and have the still have the same issues.

SM-P607T charges but will not connect to any PC - won't even try

I have an SM-P607T with an active T-Mobile plan - though I bought it from a third party then added it to my account. Previously everything worked fine, as I tried CM and a few ROMs on it, but ultimately went back to stock TMo ROM, 4.4.2, and just rooted it. Hadn't used it in awhile, grabbed it and thought I'd update to official Lollipop build.
First off, I disabled SuperSU and tried to apply the 4.4.4 update, assuming after that it'd offer me 5.1.1. Applying the 4.4.4 update failed. I factory reset the device in recovery mode (stock recovery), which of course fully removed SuperSU. Still fails updating. I downloaded the Lollipop ODIN tar, and that's where I started running into showstopper issues.
When I plug in a USB cable from a PC, the tablet starts charging, and that's it. There is no sign in windows that a device has been connected, no ding that something has been attached, no driver search. I tried this on 3 Win10 PCs. On all of them I installed Samsung Drivers, and even installed Samsung Easy Switch (new KIES). It would never register that it was plugged into a PC. I tried plugging my Note 4 in, registers and works fine (I read a thread on here by someone saying Win10 wouldn't recognize Samsung devices - not the case for me, phones work fine, just the tablet that won't show up). There is NO driver issue because the system never acknowledges anything is connected at all. I tried 3 PCs and 4 USB cables. I tried Samsung Easy Switch/KIES device recovery - tried putting tablet in download mode and tried putting it in recovery mode; neither ever shows up on PC. I tried using ADB, does not show up in devices (I have USB Debugging checked, Unknown Sources checked, etc etc).
I downloaded the Lollipop ODIN tar.md5 and put it on the microSD card. I loaded stock recovery, chose to flash from external storage, selected the .tar.md5, it said it was flashing it, said it flashed successfully even. Rebooted and it hadn't flashed at all.
Does ANYONE have ANY idea how to get my tablet updated? I can handle not being able to connect to PC, but I want to at least get OTA updates working. Factory reset, apply 4.4.4 OTA, fails after reboot every time.
Help?!

I have the similar problem as you. Someone said it could be easily resolved by enable CP logging in the recovery menu. I saw the solution after I got my device working so I did not try that.
My procedure is
1. Enter this using calculator (+30012012732+
2. enter *#0808#
3. switch to "DM+MODEM+ADB " option, OK, and reboot
4. until now, I could see the USB device in my Windows Device Manager, but MTP function won't work
5. repeat step 1 and 2
6. switch to "MTP+ADB" option, OK, and reboot
7. Done. Device could be identified. (Windows 10 x64 Pro)
Hope it could be useful for you.

Hi i have a similar problem as you, my Note is the SM-P600 that I rooted and has TWRP v2.8.7.0 and last time I went into recovery, the thing came up with a stock red upper left hand side text say "recovery in not seandroind enforcing" then ended up with the "Firmware upgrade encountered an issue please select recovery mode in kies and try again" but the damn thing will not connect. 2 usb 3 ports and 2 usb 2 ports multiplecables- anker, samsung you name it-musical ports, tried right clicking the 4 usb port hubs and unchecking power saving in power mgnt- nothing- yet my the usb drivers see my note 4 just fine, in device mngr, the note tablet shows up in usb at the bottom as samsung device, I am just perplexed as to how to un**** this thing. If you have any suggestions and can let me know I'd appreciate it.
bigillz said:
I have an SM-P607T with an active T-Mobile plan - though I bought it from a third party then added it to my account. Previously everything worked fine, as I tried CM and a few ROMs on it, but ultimately went back to stock TMo ROM, 4.4.2, and just rooted it. Hadn't used it in awhile, grabbed it and thought I'd update to official Lollipop build.
First off, I disabled SuperSU and tried to apply the 4.4.4 update, assuming after that it'd offer me 5.1.1. Applying the 4.4.4 update failed. I factory reset the device in recovery mode (stock recovery), which of course fully removed SuperSU. Still fails updating. I downloaded the Lollipop ODIN tar, and that's where I started running into showstopper issues.
When I plug in a USB cable from a PC, the tablet starts charging, and that's it. There is no sign in windows that a device has been connected, no ding that something has been attached, no driver search. I tried this on 3 Win10 PCs. On all of them I installed Samsung Drivers, and even installed Samsung Easy Switch (new KIES). It would never register that it was plugged into a PC. I tried plugging my Note 4 in, registers and works fine (I read a thread on here by someone saying Win10 wouldn't recognize Samsung devices - not the case for me, phones work fine, just the tablet that won't show up). There is NO driver issue because the system never acknowledges anything is connected at all. I tried 3 PCs and 4 USB cables. I tried Samsung Easy Switch/KIES device recovery - tried putting tablet in download mode and tried putting it in recovery mode; neither ever shows up on PC. I tried using ADB, does not show up in devices (I have USB Debugging checked, Unknown Sources checked, etc etc).
I downloaded the Lollipop ODIN tar.md5 and put it on the microSD card. I loaded stock recovery, chose to flash from external storage, selected the .tar.md5, it said it was flashing it, said it flashed successfully even. Rebooted and it hadn't flashed at all.
Does ANYONE have ANY idea how to get my tablet updated? I can handle not being able to connect to PC, but I want to at least get OTA updates working. Factory reset, apply 4.4.4 OTA, fails after reboot every time.
Help?!
Click to expand...
Click to collapse
---------- Post added at 11:04 AM ---------- Previous post was at 11:02 AM ----------
I am confused what you mean by calculator, I am on Win 10 and have a similar problem, my Note is the SM-P600 that I rooted and has TWRP v2.8.7.0 and last time I went into recovery, the thing came up with a stock red upper left hand side text say "recovery in not seandroind enforcing" then ended up with the "Firmware upgrade encountered an issue please select recovery mode in kies and try again" but the damn thing will not connect. 2 usb 3 ports and 2 usb 2 ports multiplecables- anker, samsung you name it-musical ports, tried right clicking the 4 usb port hubs and unchecking power saving in power mgnt- nothing- yet my the usb drivers see my note 4 just fine, in device mngr, the note tablet shows up in usb at the bottom as samsung device, I am just perplexed as to how to un**** this thing. If you have any suggestions and can let me know I'd appreciate it.
shineliu said:
I have the similar problem as you. Someone said it could be easily resolved by enable CP logging in the recovery menu. I saw the solution after I got my device working so I did not try that.
My procedure is
1. Enter this using calculator (+30012012732+
2. enter *#0808#
3. switch to "DM+MODEM+ADB " option, OK, and reboot
4. until now, I could see the USB device in my Windows Device Manager, but MTP function won't work
5. repeat step 1 and 2
6. switch to "MTP+ADB" option, OK, and reboot
7. Done. Device could be identified. (Windows 10 x64 Pro)
Hope it could be useful for you.
Click to expand...
Click to collapse

shineliu said:
I have the similar problem as you. Someone said it could be easily resolved by enable CP logging in the recovery menu. I saw the solution after I got my device working so I did not try that.
My procedure is
1. Enter this using calculator (+30012012732+
2. enter *#0808#
3. switch to "DM+MODEM+ADB " option, OK, and reboot
4. until now, I could see the USB device in my Windows Device Manager, but MTP function won't work
5. repeat step 1 and 2
6. switch to "MTP+ADB" option, OK, and reboot
7. Done. Device could be identified. (Windows 10 x64 Pro)
Hope it could be useful for you.
Click to expand...
Click to collapse
thank you very much. it worked.

Tab 3 SM-T210(wi-fi) flash / odin issue

Hi all,
I got given this Tab3 because the smd power socket connection guts were physically broken inside socket.
Fitted new power socket (I'm an electronics repair engineer by trade) and checked all pcb (printed circuit board) tracks leading from new fitted socket to ensure there were no hidden breaks ...... new socket refit was 100% successful .....with no solder shorts / bridges and no broken tracks leading to mainboard.
I left Tab3 on charge overnight and next day switched Tab3 on only to be greeted with dreaded .PBL and .PIT failed issue.
After extensive (days!) research I gathered together all necessary firmware and tools and decided that its an easy firmware fix if flashed to an original Samsung SM-T210 UK firmware.
(Please note I dont know past history of this Tab3 .... I dont know if it was rooted / upgraded firmware etc ..... I doubt it though as it belonged to a 7 year old)
Big issue ..... Odin flash tool won't show coms port connection on PC via USB (have tried 3 different laptops one with XP, one with Win7 32bit and another with Win7 64 bit. I've installed / uninstalled / reinstalled multiple Samsung usb drivers that were verified to work with my Tab3 SM-T210 model on each PC .... no joy. Even installed / uninstalled / reinstalled Kies from Samsung .... still wont connect when Tab3 is in download mode. Have kept PC device manager open and nothing appears in device manager. Also have tried 6 different makes of Usb A to micro Usb cables. Have disabled all antivirus, UAC, firewall and Win defender etc ... still no go!
When I go into download mode (power + Vol- +Home buttons) a warning screen does appear BUT it only shows right hand side of graphic warning ..... left hand side is totally grey from top to bottom. (LCD screen is not faulty as it displays full screen info on failed .pbl / .pit flash memory checks) When I then select Vol+ this vertical half graphic info and half grey screen disappears just leaving the backlight on .... which I assume means Tab3 is in proper download mode?
I can go to all recovery modes which allows me to factory reset and delete user cache etc .... it seems to go through the proper routines of reset but upon restart .pbl and .pit failed error in red memory check list is still there.
I can also try and flash firmware file from external sd micro card .... Tab 3 recognises firmware OK and shows Install ..../SD, but then after approx 5 minutes it restarts to failed .pbl /.pit error list again.
Apologies for long post, but from reading above issues can anyone please confirm ....
1) Is half graphic normal when going into download mode? .... or does this point to a previous incorrect or unfinished flash issue?
2) I have downloaded proper .pit flash (LT02) file and original firmware flash for my Tab3 ..... can I flash this any other way other than using Odin ....eg is there any bdm flash method (direct hard wired) flash method to motherboard from external programmer ....like they use for car ecu flash recovery?
3) As I dont know exactly whether Tab3 was rooted / flashed with wrong firmware / incomplete flash upgrade, is there a software tool that can attempt to list what firmware is on my Tab3 at present?
4) I can get into ADB recovery within recovery mode but havent a clue how to use this method .... is this a possible recovery method to use, as I can see SMT210 ADB device in PC device manager when going into recovery mode?
many thanks in advance for help, :good:
Tab3SMD
OK all, here's more info .......AND another additional issue!
I got stuck back in again tonight because not knowing anything about Tab3 ADB recovery mode was bugging me, so here's what extra I've done so far
While "poking my nose" into tonnes more Xda forum troubleshooting guides I discovered I might need PitMagic tool to try and sort my .Pit partition error via ADB recovery mode.
I tried to find Pitmagic but discovered this is now part of EFS Professional, so downloaded EFS Pro and found this got me nowhere as I needed to also install Android SDK .... which also requires Java Development kit, so I downloaded the full Android Studio and Java JDK 8u91 and installed all (about 1.2Gb and requires ~ 4.2Gb hard drive space!)
Anyway, I now ran Android Studio and then ran EFS Professional, opened my Tab3 into ADB recovery mode and connected Tab3 and PC via usb .....
All looking good EFS reported
Initialising ADB server ..... Okay.
ADB server is running!
Searching for device..... OK
Connecting to device .....OK
Checking device status .....
THEN BAMMMM ....popup from EFS
Connected device is currently UNKNOWN
Please ensure ADB server has been authorised by the connected device by confirming your PC's RSA fingerprint, then press OK to continue
like, wtf! .... one step forward and 6 back!
Can anyone please tell me what this means or better still how to proceed from here?

Anyone?
Anyone??? .....Tab3 is still soft-bricked
I did figure out how to use ADB flash recovery mode using PC.
Unfortunately this also did not allow me to flash any firmware (original or custom) due to admin permissions
(I think this is due to USB debugging not activated within Developer options).
I'm sorta banging my head off the wall with this one .... a bit like what came first? egg or chicken?, because since Odin isn't being recognised by the PC, I cannot flash rom and even though the PC fully communicates with Tab 3 in ADB mode, it won't allow me permission to sideload any flash files because I reckon I need root based permissions, and since the darn thing isn't booting fully, I cannot manually change anything!
I then started thinking about trying to sneak around this permissions issue by flashing CWM or TWRP, but again flash fails due to no permission.
All in all, for me this has been a great learning experience tackling the multiple Android recovery modes, and since I feel so close to cracking this non boot issue, I hate to give up and bin it.
Perhaps someone with much more experience can please help me here?
Is there any way of forcing superuser status on this Tab 3 SM-T210, so as to allow me to flash stock rom via ADB recovery mode?
many thanks in advance for your help,
Tab3SMD

PC cannot see phone

Hi
I would appreciate any input/help on this issue.
I bought the Korean Note 10 + 5g exynos (SM-N976N), specifically for the purposes of being able to root it. I would prefer to use the Magisk approach, because I would like to be able to use Google Pay, amongst others
Try as I might, I cannot get my PC to "see" the android phone. I have engaged developer mode, checked USB debugging, checked the the USB connection as MTP mode, and gone through several cables, going by the advice of "experts" I consulted. I even went as far as returning my original phone and buying a new one, again, on the advice of an "expert" who determined that my original phone was faulty (unlikely, since I had literally taken it out of the box and attempted the rooting before trying to load my multiple software). I am using Windows 10, 64k, with all current Microsoft updates.
I have reloaded the Samsung USB drivers, rebooted both the phone and PC several times, to no avail. When I connect, in download mode, the USB cable between the two devices, I hear the "ping" on the PC, indicating that the two have made contact, but then - nothing. I have established that the cable works fine, by connecting my Note 8 to the PC, where it shows up as a device with two drives (int and SD card)
I have installed Magisk on the 10+, and modified the stock ROM with Magisk, and then copied that over to the PC, as advised by the rooting solution; the problem is that I cannot use Odin to flash that modified ROM because Odin does not recognize any phone attached to it!
Help, Please!!

Could be the Odin version your using

Perhaps, I hadn't thought of that. I am using 3.13.1. Do you have a suggestion about using a more stable/useful one? My only issue with your answer is that it's not just Odin that isn't responding- it's the entire computer - it's as if the phone doesn't exist when connected.

I'm guessing you are using a USB 3.0 port on pc? If you have access to USB 2.0 try that....
Next thing I'd suggest (with note plugged in while in download mode)....go into device manager (right click This PC)
Find device under Modem, open properties Ports tab, Advanced Settings and manually change the port setting to a lower port assignment (preferably between 1 & 5). Reboot pc and just for kicks reset the phone into Download Mode again....Give odin a try now.
Hope one or a combination of these methods help.
Sent from my [device_name] using XDA-Developers Legacy app