Boots to recovery, Miflash doesnt work, HELP PLS - Xiaomi Mi A2 Lite Questions & Answers

hello guys. I recently was given a xiaomi a2 lite , I had some problems with the phone in stock form, problems in ram,screen and overall bugs so I decided to change it. I changed it to costume rom and it was all good ttill I wanted to make a factory reset, it lost its system and now its stuck on recovery mode (twrp) I searched about this problem and tried everything. miflash, adb sidload, installing from recovery, and really nothing worked, I double checked on the bootlocker and it was unlocked , can someone send the solution to me step by step asap? it have been like that for two days and i really need my phone for my daily life, I don't have anther one......and im broke....
i forgot to say that miflash doesn't work and I says error flash_all_lock.bat

BelalElbeik said:
hello guys. I recently was given a xiaomi a2 lite , I had some problems with the phone in stock form, problems in ram,screen and overall bugs so I decided to change it. I changed it to costume rom and it was all good ttill I wanted to make a factory reset, it lost its system and now its stuck on recovery mode (twrp) I searched about this problem and tried everything. miflash, adb sidload, installing from recovery, and really nothing worked, I double checked on the bootlocker and it was unlocked , can someone send the solution to me step by step asap? it have been like that for two days and i really need my phone for my daily life, I don't have anther one......and im broke....
i forgot to say that miflash doesn't work and I says error flash_all_lock.bat
Click to expand...
Click to collapse
try to flash with miflash in EDL mode by typing command "fastboot oem edl" and make sure on the botom of miflash tool "clean all" is ticked. Also make sure the target of the rom is correct.

now i have another error
hrvoje007 said:
try to flash with miflash in EDL mode by typing command "fastboot oem edl" and make sure on the botom of miflash tool "clean all" is ticked. Also make sure the target of the rom is correct.
Click to expand...
Click to collapse
look what its saying now
-my phone has stopped even booting to recovery after this and its notification light is blinking

BelalElbeik said:
look what its saying now
-my phone has stopped even booting to recovery after this and its notification light is blinking
Click to expand...
Click to collapse
Blinking led is normal you are in edl mode, open miflash click refresh and you'll see com..., that's your device ,select your flash file and choose clean all and lock ,or unlock, choose flash, it Will take about 10 min.
---------- Post added at 06:20 PM ---------- Previous post was at 06:17 PM ----------
BelalElbeik said:
look what its saying now
-my phone has stopped even booting to recovery after this and its notification light is blinking
Click to expand...
Click to collapse
You also must download your flash file to your /:C disk, map platform tools, unpack your file .maybe you'll have to unpack twice, you need tgz. File

hrvoje007 said:
try to flash with miflash in EDL mode by typing command "fastboot oem edl" and make sure on the botom of miflash tool "clean all" is ticked. Also make sure the target of the rom is correct.
Click to expand...
Click to collapse
Nxkealen said:
Blinking led is normal you are in edl mode, open miflash click refresh and you'll see com..., that's your device ,select your flash file and choose clean
all and lock ,or unlock, choose flash, it Will take about 10 min.
---------- Post added at 06:20 PM ---------- Previous post was at 06:17 PM ----------
You also must download your flash file to your /:C disk, map platform tools, unpack your file .maybe you'll have to unpack twice, you need tgz. File
Click to expand...
Click to collapse
okay I just tried it and still, u can check the photos, and before it it was saying ^"cannot receive hello packet"
what should I do? one another think, can anybody please sent to me links to rom,miflash,platform combination that surely works? I tried a lot of stock fasboot roms and nothing works so it might be a problem with my miflash( with I also changed quit a few times) or rom …...this s my third day without phone pls help

Here is the problem: you need to copy address of the rom to miflash tool please watch this video and let me know if it helped.
https://youtu.be/TdvAlb7cXvQ

hrvoje007 said:
Here is the problem: you need to copy address of the rom to miflash tool please watch this video and let me know if it helped.
https://youtu.be/TdvAlb7cXvQ
Click to expand...
Click to collapse
pleae look at this, when I uncompress the file it comes like this, not in a file , check the pic here

If everything fall try to put fast boot rom on root of C drive. My is C:\daisy\daisy_global. Reed somewhere that Mi flash have a problem with long names

hrvoje007 said:
Here is the problem: you need to copy address of the rom to miflash tool please watch this video and let me know if it helped.
https://youtu.be/TdvAlb7cXvQ
Click to expand...
Click to collapse
bobrda said:
If everything fall try to put fast boot rom on root of C drive. My is C:\daisy\daisy_global. Reed somewhere that Mi flash have a problem with long names
Click to expand...
Click to collapse
can u send me a link to the rom?

guys, problem solved..... thanks for all if the help!!!!!

Related

No OS image now, please help!

I tried to root my device, and I eventually I managed, but i missed the step to recover my android phone backup from google drive during the startup setup, so I found some tutorial and it seems to tell me erase the phone back to factory so that I can see the startup setup again.
Now the device only boots into TWRP, and I have downloaded two different stock image , V10.0.1.0 and V10.0.2.0, trying to install in recovery mode, so I follow instruction, wipe system before install.
but both of them giving me error, not opening the zip file.
Now I can not use my phone, how can I install a OS please?
luckyvictor said:
I tried to root my device, and I eventually I managed, but i missed the step to recover my android phone backup from google drive during the startup setup, so I found some tutorial and it seems to tell me erase the phone back to factory so that I can see the startup setup again.
Now the device only boots into TWRP, and I have downloaded two different stock image , V10.0.1.0 and V10.0.2.0, trying to install in recovery mode, so I follow instruction, wipe system before install.
but both of them giving me error, not opening the zip file.
Now I can not use my phone, how can I install a OS please?
Click to expand...
Click to collapse
Hello,
I think a solution is to use MiFlash and to restore your phone, you will loose all of your data, your recovery and magisk.
Download link : https://xiaomiflashtool.com/
- Boot your phone in Fastboot and connect it to your computer,
- Extract the stock rom to a folder normally you will obtain some files with a folder called images.
- In MiFlash select this folder.
- Click on refresh, if your phone is connected to your computer and in fastboot mode it will appear.
Now select clean all and click on flash button.
Your phone will reboot normally.
If it doesn't work tell me !
Pierre
If I helped you drop a thanks !
Pierre_C said:
Hello,
I think a solution is to use MiFlash and to restore your phone, you will loose all of your data, your recovery and magisk.
Download link : https://xiaomiflashtool.com/
- Boot your phone in Fastboot and connect it to your computer,
- Extract the stock rom to a folder normally you will obtain some files with a folder called images.
- In MiFlash select this folder.
- Click on refresh, if your phone is connected to your computer and in fastboot mode it will appear.
Now select clean all and click on flash button.
Your phone will reboot normally.
If it doesn't work tell me !
Pierre
If I helped you drop a thanks !
Click to expand...
Click to collapse
There is no stock rom available on that website, so can I use the stock rom that I found on internet? do I need those batch script?
luckyvictor said:
There is no stock rom available on that website, so can I use the stock rom that I found on internet? do I need those batch script?
Click to expand...
Click to collapse
Download this stock oreo rom (You will install pie after if you want) http://bigota.d.miui.com/V9.6.11.0.ODLMIFF/daisy_global_images_V9.6.11.0.ODLMIFF_20181112.0000.00_8.1_8028e3bf1c.tgz
You will obtain an archive, unzip it while you obtain a folder with some .bat ans .sh ans a folder called "images". At that time run MiFlash and select the folder that contain these files. After follow the instructions of the old post
If you have some questions I'm here
Pierre
If I help you drop a thanks: )
Pierre_C said:
Download this stock oreo rom (You will install pie after if you want) http://bigota.d.miui.com/V9.6.11.0.ODLMIFF/daisy_global_images_V9.6.11.0.ODLMIFF_20181112.0000.00_8.1_8028e3bf1c.tgz
You will obtain an archive, unzip it while you obtain a folder with some .bat ans .sh ans a folder called "images". At that time run MiFlash and select the folder that contain these files. After follow the instructions of the old post
If you have some questions I'm here
Pierre
If I help you drop a thanks: )
Click to expand...
Click to collapse
Should I use those script? e.g Flash All, Flash all except storage and also Flash All Except data and Storage?
luckyvictor said:
Should I use those script? e.g Flash All, Flash all except storage and also Flash All Except data and Storage?
Click to expand...
Click to collapse
Flash All
Pierre_C said:
Flash All
Click to expand...
Click to collapse
ok, now I have downloaded it, extract it and using MiFlash tool, it gives me error of length cannot be less than 0
luckyvictor said:
ok, now I have downloaded it, extract it and using MiFlash tool, it gives me error of length cannot be less than 0
Click to expand...
Click to collapse
Send me your logs they are in C:\Xiaomi
Pierre_C said:
Download this stock oreo rom (You will install pie after if you want) http://bigota.d.miui.com/V9.6.11.0.ODLMIFF/daisy_global_images_V9.6.11.0.ODLMIFF_20181112.0000.00_8.1_8028e3bf1c.tgz
You will obtain an archive, unzip it while you obtain a folder with some .bat ans .sh ans a folder called "images". At that time run MiFlash and select the folder that contain these files. After follow the instructions of the old post
If you have some questions I'm here
Pierre
If I help you drop a thanks: )
Click to expand...
Click to collapse
There's already a fastboot Pie rom for mi a2 Lite
http://bigota.d.miui.com/V10.0.2.0....0.PDLMIFJ_20181221.0000.00_9.0_fed1fcdf5d.tgz
Pierre_C said:
Send me your logs they are in C:\Xiaomi
Click to expand...
Click to collapse
[21:22:00]: 在 System.String.Substring(Int32 startIndex, Int32 length)
在 MiUSB.USB.GetUsbNodeInformation(String DevicePath)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.AddHubNode(String HubPath, String HubNodeName)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.get_AllUsbDevices()
在 XiaoMiFlash.code.Utility.UsbDevice.GetDevice()
在 XiaoMiFlash.MainFrm.RefreshDevice()
luckyvictor said:
[21:22:00]: 在 System.String.Substring(Int32 startIndex, Int32 length)
在 MiUSB.USB.GetUsbNodeInformation(String DevicePath)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.AddHubNode(String HubPath, String HubNodeName)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.get_AllUsbDevices()
在 XiaoMiFlash.code.Utility.UsbDevice.GetDevice()
在 XiaoMiFlash.MainFrm.RefreshDevice()
Click to expand...
Click to collapse
Install xiaomi driver in MiFlash and retry
Pierre_C said:
Install xiaomi driver in MiFlash and retry
Click to expand...
Click to collapse
I have installed the USB driver, the qualcomm usb driver, and install those 5 drivers within MiFlash tool (google, nvidia, microsoft, microsoft, qualcomm), and i still get the same error.
is it because my phone has nothing but only the TWRP? no OS? so it can not be detected by the computer?
luckyvictor said:
I have installed the USB driver, the qualcomm usb driver, and install those 5 drivers within MiFlash tool (google, nvidia, microsoft, microsoft, qualcomm), and i still get the same error.
Click to expand...
Click to collapse
Run MiFlash in administrator
Pierre_C said:
Run MiFlash in administrator
Click to expand...
Click to collapse
Tried, same error.
is it because my phone has nothing but only the TWRP? no OS? so it can not be detected by the computer?
luckyvictor said:
Tried, same error.
is it because my phone has nothing but only the TWRP? no OS? so it can not be detected by the computer?
Click to expand...
Click to collapse
download minimal adb and fastboot and install it. Open it enter "fastboot devices" and send me the output.
Pierre_C said:
download minimal adb and fastboot and install it. Open it enter "fastboot devices" and send me the output.
Click to expand...
Click to collapse
fastboot device does return a id
69d2d83f0505 fastboot
so does it mean I should be able to use MiFlash?
By the way, I really appreciate your help so far, you are so great.
luckyvictor said:
fastboot device does return a id
69d2d83f0505 fastboot
so does it mean I should be able to use MiFlash?
By the way, I really appreciate your help so far, you are so great.
Click to expand...
Click to collapse
Try run flash_all.bat manually
No problem for my help this is normal
Pierre
Pierre_C said:
Try run flash_all.bat manually
No problem for my help this is normal
Pierre
Click to expand...
Click to collapse
it works!!
But something quite strange, the machine is a bit slow, and i have typed the correct (for sure) password for my wifi a few times, and only the 7th or 8th try it connects.
and I dont seem to be able to install apps from google play, they all stuck in download pending.
Can I actually 'factory reset' the phone to the status when it was out of the box?
luckyvictor said:
it works!!
But something quite strange, the machine is a bit slow, and i have typed the correct (for sure) password for my wifi a few times, and only the 7th or 8th try it connects.
and I dont seem to be able to install apps from google play, they all stuck in download pending.
Can I actually 'factory reset' the phone to the status when it was out of the box?
Click to expand...
Click to collapse
Yes try a factory reset or try restart your phone
Pierre_C said:
Yes try a factory reset or try restart your phone
Click to expand...
Click to collapse
I used erase all data (factory reset), and this was how I ended up booting only into TWRP.

Phone bricked, only acces in fastboot mode

Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Is your bootloader (still) unlocked and do you have access to fastboot?
Veran125 said:
Is your bootloader (still) unlocked and do you have access to fastboot?
Click to expand...
Click to collapse
Yes, bootloader's still unlocked and i have acces to fastboot.
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Thanks for your magic answer, but i can't find your toolkit, BUT i found this https://forum.xda-developers.com/mi...ol-tool-one-driversunlocktwrpfactory-t3866191. Is it good also ?
You can just get newest fastboot rom, and then flash with Miflash
Veran125 said:
You can just get newest fastboot rom, and then flash with Miflash
Click to expand...
Click to collapse
If it was too simply ... I think i did that already, But fastboot room, what do you mean with that ?
I just want, now, to be sure, can i save my phone ? It's not dead ?
Cause it's a very good phone and i don't want to loose it, really.
Nope, it's not dead, even with locked bootloader it wouldn't be. But now that you've got an unlocked bootloader, it's very easy to restore
I'm more happy so, 5 hours ( no fake really ) i search a solution .... SO
I found a global rom without .bat files in this folder so i got an error with Mi Flash Tool .. Tell me more about your idea
What's the error if I may ask?
Veran125 said:
What's the error if I may ask?
Click to expand...
Click to collapse
Can not found ( don't remember the file name).bat
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
-Tente isso:
Download this official rom: https://en.miui.com/download-354.html
Download this Mi Flash Tool: http://api.en.miui.com/url/MiFlashTool
*I'm assuming you already have the ADB drivers installed on your PC
*Remember to check the CLEAN ALL option
-If the above method does not work, do the following:
* It will only work if you do not have TWRP installed, if it is with twrp installed, I recommend reinstalling the original recovery *
1-Turn off the device and press (POWER BUTTON + VOLUME UP). At that point, the android doll will appear and spelled 'NO COMMAND'
2-Press only (POWER BUTTON) and click quickly (VOLUME UP BUTTON). In this screen you will see the recovery options, use the volume buttons to go to the WIPE DATA/FACTORY RESET option, confirm with YES and restart the device.
3- Wait patiently for 3/5 minutes.
-If none of this works and you can still access twrp, I recommend you try installing a GSI rom using this method: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-functional-twrp-magisk-pie-gsi-t3900119
I recommend this GSI rom (I'm using this now): https://get.resurrectionremix.com/?dir=gsi (choose 'arm64-ab')
This will give you a working system and make it easier to return to stock.
Hope one of these methods helped!
Hi all,
The problem was my PC i had not the .bat files so it couldn't work ...
Thanks @Bruno_Designer for your message, but i hate RROS but you're solution was good
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
If u alredy used twrp den u have adb.
U need mi flash tool.
Download any one of the full fastboot roms for Mi A2 Lie below:
9.6.4.0: https://xiaomifirmware.com/download/10399/
9.6.10.0: https://xiaomifirmware.com/download/10867/
10.0.3: https://xiaomifirmware.com/download/11586/
So to revive ur fone, u do dis. Dis was how i did mine.
1. After downloading a rom of choice, u extract on ur pc using winrar, 7zip or izarc. U basically open the archive using any of these software n copy out the folder contained. The name usually starts with "daisy global ...."
2. U open the extracted rom folder. U will see a bunch of files including "flash_all.bat" etc and a folder called "images".
3. Click on the address bar of d rom folder and copy the address. Den open "mi flash tool" and paste d copied address in the mi flash tool address bar n click on refresh.
4. Boot ur phone to fastboot mode, using "power" & "volume down" buttons together.
connect d phone to ur pc via usb cable.
5. Open ur adb folder and open the adb command window.
Type in the following, one after the other n click enter:
" fastboot devices " dis to confirm the adb connection
" fastboot oem edl " dis to enter edl mode. Ur fone led starts blinking at 1sec intervals.
6. Back to mi flash tool, u click on "refresh". After a second ur fone should be seen as a COM port "COM 10"
7. At d bottom right, u shd find 3 options. Selct "clean all". This shd leave ur bootloader unlocked after the process.
8. U click on "flash" button at the top right. All things going well, within 10 mins the process shd be done and u will see "green" indicator with "success".
9. Hold ur fone n press d power botton for 10 secs. Then ur fone shd power up. Give ur fone exactly about 5 mins to come up "look at the clock & dnt assume"
Dis is an edit of others tutorials. But this is exactly how it worked for me. As long as u use any of the 3 roms i linked u.
Unless i use edl mode, it jus doesnt work for me.
Good luck. Leta know how it goes. And pls click thanks if i helped u.
Problem solved
Thread closed at OP request

How to do test point after show THE SYSTEM HAS BEEN DESTROYED

After upload 10.2.9.0 my phone was bricked with this message. The system has been destroyed:silly:
I have tried all the methods that exist for other Xiaomi phones because this is very new and I do not find tutorials for this mobile and whenever I do the test point and give it to flash it gives me the following error
dump error: <? xml version = "1.0" encoding = "UTF-8"?> <data> <log value = "ERROR: Only nop and sig tag can be recevied before authentication." /> </ data> <? xml version = "1.0" encoding = "UTF-8"?> <data> <response value = "NAK" /> </ data>
I have tried with China stable rom, China developer, global stable. I have tried with 3 cables. It always gives the same error
I resort to the test point because I can only enter Fastboot, I can not go into recovery. I do not have a Xiaomi account associated in my Device and neither do I have debug usb enabled. My last option was the test point.
It reached the step where the pc recognizes me as Qualcomm 9008 and when I flash the fastboot decompressed rom I get the error mentioned above.
Let's see if someone helps me tell me where I do it wrong.
Please help me
Husca said:
After upload 10.2.9.0 my phone was bricked with this message. The system has been destroyed:silly:
I have tried all the methods that exist for other Xiaomi phones because this is very new and I do not find tutorials for this mobile and whenever I do the test point and give it to flash it gives me the following error
dump error: <? xml version = "1.0" encoding = "UTF-8"?> <data> <log value = "ERROR: Only nop and sig tag can be recevied before authentication." /> </ data> <? xml version = "1.0" encoding = "UTF-8"?> <data> <response value = "NAK" /> </ data>
I have tried with China stable rom, China developer, global stable. I have tried with 3 cables. It always gives the same error
I resort to the test point because I can only enter Fastboot, I can not go into recovery. I do not have a Xiaomi account associated in my Device and neither do I have debug usb enabled. My last option was the test point.
It reached the step where the pc recognizes me as Qualcomm 9008 and when I flash the fastboot decompressed rom I get the error mentioned above.
Let's see if someone helps me tell me where I do it wrong.
Please help me
Click to expand...
Click to collapse
FIXED IT (at least temporarely)
- boot into fastboot mode. press volume down and power until you see the mi bunny.
- install and run minimal adb and fastboot on a pc
- plug phone to pc
- run "fastboot devices" you should see a line with device id & fastboot
- run "fastboot continue"
wait for it
tadam you will be back into the old miui 10.2.9.
first thing you should do is dev options, mi unlock and bind phone & account. (that way you can then unlock)
credits: laviniuc
Derfeeel said:
FIXED IT (at least temporarely)
- boot into fastboot mode. press volume down and power until you see the mi bunny.
- install and run minimal adb and fastboot on a pc
- plug phone to pc
- run "fastboot devices" you should see a line with device id & fastboot
- run "fastboot continue"
wait for it
tadam you will be back into the old miui 10.2.9.
first thing you should do is dev options, mi unlock and bind phone & account. (that way you can then unlock)
credits: laviniuc
Click to expand...
Click to collapse
Omg :good:
this method has worked
you're my idol
thanks for saving me
I tried power off and then on I have same problem but using your tip I can restart again. Now I need unlock bootloader, but then? Have I instalo TRWP and flash 10.2.3.0 version?
after you unlock you should have options that werent there on locked:
- twrp from fastboot, format and custom rom
- miflash the latest tgz
havent tried any myself, still on locked, waiting time 6 days
or you can just fastboot continue on each restart, xiaomi should fix the update eventually...
laviniu_c said:
after you unlock you should have options that werent there on locked:
- twrp from fastboot, format and custom rom
- miflash the latest tgz
havent tried any myself, still on locked, waiting time 6 days
or you can just fastboot continue on each restart, xiaomi should fix the update eventually...
Click to expand...
Click to collapse
Have you also tried to flash the official global rom using miflash but it has not left you flash because you had the bootloader locked? I tried a lot of times and always said ERROR
If I have unlocked bootloader will I can flash all roms using tgz in Miflash?
Husca said:
Have you also tried to flash the official global rom using miflash but it has not left you flash because you had the bootloader locked? I tried a lot of times and always said ERROR
If I have unlocked bootloader will I can flash all roms using tgz in Miflash?
Click to expand...
Click to collapse
after you unlock yes, the miflash SHOULD work.
i havent tried because my unlock is on the 7 days timer.
yes. when the phone was bricked i tried with miflash and kept getting error. sometime just error, others also 'cannot erase in locked mode'
Anyone can enter in recovery after unbrick by ADB?
parfetto said:
Anyone can enter in recovery after unbrick by ADB?
Click to expand...
Click to collapse
i cannot, maybe some of the users who managed to fully install 10.3.1 might be able to.
laviniu_c said:
i cannot, maybe some of the users who managed to fully install 10.3.1 might be able to.
Click to expand...
Click to collapse
you must flash complete Image with XiaoMIFlash! after this you can install TWRP too.
nill3bor said:
you must flash complete Image with XiaoMIFlash! after this you can install TWRP too.
Click to expand...
Click to collapse
nodoby (i think) has the 10.3.1 pfbeuxm tgz for eea because it wasnt ever released. so clearly some users do manage to flash the recovery package too. im hoping those are able to boot into recovery too...
I try to with recovery flash, 10.2 zip and 10.3 zip and have sussed installations but no recovery.
After boot it bricks again and don't have recovery
---------- Post added at 02:19 PM ---------- Previous post was at 02:16 PM ----------
parfetto said:
I try to with recovery flash, 10.2 zip and 10.3 zip and have sussed installations but no recovery.
After boot it bricks again and don't have recovery
---------- Post added at 02:19 PM ---------- Previous post was at 02:16 PM ----------
Click to expand...
Click to collapse
Hello, I think that's because you need to use the "fastboot" file and not the "recovery".
Try this one for instance:
https://bigota.d.miui.com/V10.2.3.0...BEUXM_20190403.0000.00_9.0_eea_60219f14d6.tgz
It's a Good help.
Now just need an authorised account to mi flash ?
quick update/question:
anyone with 201903 working ota? or 201904 failing? (the manufacturing date is printed on the phone box back, bottom right near the sn barcode)
parfetto said:
It's a Good help.
Now just need an authorised account to mi flash
Click to expand...
Click to collapse
load here last version: https://xiaomiflashtool.com/download/xiaomi-flash-tool-20181115
or installer here: https://www.xiaomigeek.com/download-xiaomi-mi-flash-tool.html
work here without account or any login fine!
Use the right Image and unzip the file!
use downloadlink from kagazushi or use V10.2.3.0 or
V10.2.9.0.PFBEUXM
nill3bor said:
load here last version: https://xiaomiflashtool.com/download/xiaomi-flash-tool-20181115
or installer here: https://www.xiaomigeek.com/download-xiaomi-mi-flash-tool.html
work here without account or any login fine!
Use the right Image and unzip the file!
use downloadlink from kagazushi or use V10.2.3.0 or
V10.2.9.0.PFBEUXM
Click to expand...
Click to collapse
Have you do test point? I have locked BL
parfetto said:
Have you do test point? I have locked BL
Click to expand...
Click to collapse
sorry my BL is unlocked!
@parfetto,
which version (MiFlash) did you try?
install version and 20180528 or older - you not need an account!
it's just a test...
Derfeeel said:
FIXED IT (at least temporarely)
- boot into fastboot mode. press volume down and power until you see the mi bunny.
- install and run minimal adb and fastboot on a pc
- plug phone to pc
- run "fastboot devices" you should see a line with device id & fastboot
- run "fastboot continue"
wait for it
tadam you will be back into the old miui 10.2.9.
first thing you should do is dev options, mi unlock and bind phone & account. (that way you can then unlock)
credits: laviniuc
Click to expand...
Click to collapse
laviniu_c said:
after you unlock you should have options that werent there on locked:
- twrp from fastboot, format and custom rom
- miflash the latest tgz
havent tried any myself, still on locked, waiting time 6 days
or you can just fastboot continue on each restart, xiaomi should fix the update eventually...
Click to expand...
Click to collapse
Hi.
Can you tell me when I try FLASHING which have I choose: "CLEAN ALL" or "CLEAN ALL AND LOCK"?
Husca said:
Hi.
Can you tell me when I try FLASHING which have I choose: "CLEAN ALL" or "CLEAN ALL AND LOCK"?
Click to expand...
Click to collapse
CLEAN ALL is ok, other will locked you bootloader!

Please Help [Stuck on boot logo, can't boot to recovery or ROM]

Stuck on boot logo !!!!! :crying:
Can't :
1. Can't boot to ROM (as doing so just stays on boot logo)
2. Can't boot into recovery (as doing this gets me to either black screen or just boots back to the boot logo)
Can :
1. Can enter bootloader
2. Can able to use fastboot commands
Tried:
1. flashing stock ROM several times,
2. flashing stock recovery
3. flashing twrp recovery
:crying:
Check my guide. It might come handy.
https://forum.xda-developers.com/le...-lenovo-p2-t4006405/post80955105#post80955105
alirazaagha said:
Check my guide. It might come handy.
https://forum.xda-developers.com/le...-lenovo-p2-t4006405/post80955105#post80955105
Click to expand...
Click to collapse
Friend thanks for the reply but your link just says "Duplicate thread. "
hackiee said:
Friend thanks for the reply but your link just says "Duplicate thread. "
Click to expand...
Click to collapse
Yes, it was. Check this one.
https://forum.xda-developers.com/lenovo-p2/how-to/guide-unbrick-unlocked-lenovo-p2-t4006401
alirazaagha said:
Yes, it was. Check this one.
https://forum.xda-developers.com/lenovo-p2/how-to/guide-unbrick-unlocked-lenovo-p2-t4006401
Click to expand...
Click to collapse
Thanks for your post friend, but, your guide doesn't fulfill my situation.
As, I am stuck on bootliader or boot logo.
I have flashed all firmwares s048,s233,s244,s51 through fastboot but none of them able to get me out of it.
Even tried flashing various recoveries both stock and twrp but neither of them helped
If, anyhow I can be able to enter into TWRP. It will solve the problem. But, I don't know nothing seems to work.
Even tried corrupting the bootloader and then flashing blankflash, but that too didn't able to get me out of the bootlogo.
Please help ?
alirazaagha said:
Yes, it was. Check this one.
https://forum.xda-developers.com/lenovo-p2/how-to/guide-unbrick-unlocked-lenovo-p2-t4006401
Click to expand...
Click to collapse
Hey, can you please do 1 thing.
Can you provide an image of the bootloader mode of your lenovo p2, if, there's something to lookup idk
I am attaching image of my bootloader, if you can look into it.
Thanks
hackiee said:
Hey, can you please do 1 thing.
Can you provide an image of the bootloader mode of your lenovo p2, if, there's something to lookup idk
I am attaching image of my bootloader, if you can look into it.
Thanks
Click to expand...
Click to collapse
It's alright.
alirazaagha said:
It's alright.
Click to expand...
Click to collapse
nothing strange ? Ok thanks
hackiee said:
nothing strange ? Ok thanks
Click to expand...
Click to collapse
Yep. Go ahead. You can try S244 firmware to try and boot your phone. If it boots then update accordingly as I mentioned in my guide.
alirazaagha said:
Yep. Go ahead. You can try S244 firmware to try and boot your phone. If it boots then update accordingly as I mentioned in my guide.
Click to expand...
Click to collapse
Still no luck! :crying: flashed S244 several times but nothing.
Can you confirm one more thing.
When I give
"Fastboot format system" I get :
"Formatting is not supported for file system with type 'raw'."
screenshot attached. Please check
hackiee said:
Still no luck! :crying: flashed S244 several times but nothing.
Can you confirm one more thing.
When I give
"Fastboot format system" I get :
"Formatting is not supported for file system with type 'raw'."
screenshot attached. Please check
Click to expand...
Click to collapse
OK so you are not following my guide Check .txt file attached in that guide and if you are still unsure then ask me.
alirazaagha said:
OK so you are not following my guide Check .txt file attached in that guide and if you are still unsure then ask me.
Click to expand...
Click to collapse
I have checked the text file of your guide, and they are the same instructions which I have been following since start. :silly:
The "fastboot format system" is a command which I used to do on my Moto G, and was able to format system successfully.
But, I don't remember if it used to work on P2 or not , that's why I asked you. If, you can use that command to check the output on your device.
Thanks
hackiee said:
I have checked the text file of your guide, and they are the same instructions which I have been following since start. :silly:
The "fastboot format system" is a command which I used to do on my Moto G, and was able to format system successfully.
But, I don't remember if it used to work on P2 or not , that's why I asked you. If, you can use that command to check the output on your device.
Thanks
Click to expand...
Click to collapse
Hmmm so you haven't read .txt file carefully. Command is:
Fastboot ERASE system
See the difference now? :silly:
Please, discuss it on that thread if need so others could also benefit from it.
alirazaagha said:
Hmmm so you haven't read .txt file carefully. Command is:
Fastboot ERASE system.
Click to expand...
Click to collapse
OMG, yes brother, I already know the command, and I have used it several times, the fastboot ERASE command, but, as mentioned several timesin the past, it is not solving my problem.
As, I am still not able to enter into any recovery(neither stock nor twrp), and not able to boot and OS.
That's why, I wanna try "Fastboot format system" command.
If, somehow that solves my problem
hackiee said:
OMG, yes brother, I already know the command, and I have used it several times, the fastboot ERASE command, but, as mentioned several timesin the past, it is not solving my problem.
As, I am still not able to enter into any recovery(neither stock nor twrp), and not able to boot and OS.
That's why, I wanna try "Fastboot format system" command.
If, somehow that solves my problem
Click to expand...
Click to collapse
OK. I though that you only tried Format command not erase. You should skip this command and do the whole process. I have added this command so that previous system files are erased. But, I booted my phone without using this command first time. Second time, I tried to see if I can do it all in a single process then I added this command and it worked without any issues and all the process went smooth and phone booted like a new one.
Try all commands but skip erase system command.
stuck on logo , have access to fastboot only
My phone stuck on logo when i open it or when i insert charger
when i try to open recovery(volume up + down) it turned off and i can't open recovery by any way
i can access fastboot
i tried your instruction and Lenovo+P2+UnBrick+OneTeam-EypCnn and all other fastboot roms
i tried install Twrp and stock recovery
i tried blankflash
that didn't help ,i can only access fastboot
what is your recommendation ? it's a hardware issue ?
DrGhost001 said:
stuck on logo , have access to fastboot only
My phone stuck on logo when i open it or when i insert charger
when i try to open recovery(volume up + down) it turned off and i can't open recovery by any way
i can access fastboot
i tried your instruction and Lenovo+P2+UnBrick+OneTeam-EypCnn and all other fastboot roms
i tried install Twrp and stock recovery
i tried blankflash
that didn't help ,i can only access fastboot
what is your recommendation ? it's a hardware issue ?
Click to expand...
Click to collapse
Did you find any solution?
Same issue here, I guess it's a hardware issue: SSD is damaged ?
fastboot erase system
fastboot format:ext4 system
Maybe related to the file system ?
i have the same probelm, do you guys find any solution ?

never ending boot after stock ROM install

My Mi A2 Lite had stock rom v10.0.18.0, unlocked bootloader, Magisk v20.3 and TWRP using Offain v3.3.1.
I wanted to try dotOS custom ROM and followed this tutorial:
https://github.com/tkchn/daisyinstall
I begin with step 1 installing daisy global image v10.0.18.0 with flash_all.sh.
First time the script froze in the beginning.
I restarted it and it finished without errors but the following boot never ends.
I tried the same procedure with v10.0.3.0.
No errors and a never ending boot.
I tried to reinstall twrp from Offain using fastboot.
It looks OK but I can not press any button because the first twrp screen is frozen.
Now I can only enter fastboot.
adb does not recognize the device but fastboot seems to be working.
I am woried about my batery. I cannot see if it is charging because the boot is never ending. When I left fastboot without connecting USB cable I can turn off the phone but if I connect the charger the phone begins to work as if booting again and again.
What can I do to install the stock ROM without issues?
renatogui said:
My Mi A2 Lite had stock rom v10.0.18.0, unlocked bootloader, Magisk v20.3 and TWRP using Offain v3.3.1.
I wanted to try dotOS custom ROM and followed this tutorial:
https://github.com/tkchn/daisyinstall
I begin with step 1 installing daisy global image v10.0.18.0 with flash_all.sh.
First time the script froze in the beginning.
I restarted it and it finished without errors but the following boot never ends.
I tried the same procedure with v10.0.3.0.
No errors and a never ending boot.
I tried to reinstall twrp from Offain using fastboot.
It looks OK but I can not press any button because the first twrp screen is frozen.
Now I can only enter fastboot.
adb does not recognize the device but fastboot seems to be working.
I had frozen twrp screen before but usually managed to fix just by restarting the phone and using twrp offain in adb.
I am woried about my batery. I cannot see if it is charging because the boot is never ending. When I left fastboot without connecting USB cable I can turn off the phone but if I connect the charger the phone begins to work as if booting again and again.
What can I do to install the stock ROM without issues?
Click to expand...
Click to collapse
1- Download this: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
2- Create a new folder on your C drive and name it: adb
3- Extract & place everything from the platform-tools into your adb folder
4- Download this: https://drive.google.com/open?id=1SKIlWS-y6kNI4YIE2Sj4_9CcRJ9W0xTh
5- Extract & place it to your adb folder
6- Reboot your phone to TWRP and wipe it, then reboot to bootloader
7- Connect your phone to your PC
8- Go into the daisy_global_images_V10.0.9.0.PDLMIXM_9.0 folder and run: flash_all.bat
A window will pop up and install the stock mi a2 lite rom. Let it finish then your phone boot up. You will have to update your phone since this stock rom that I linked is a pretty old one.
Someone had a similar question in another forum, so I just copy my answer from there. If you have adb already installed you can ignore the first 3 steps.
I had frozen twrp screen a couple of times but managed to fix it by restarting the phone and re-open the powershell window in adb. I use twrp-daisy-3.2.3-0-offain.img
I'm afraid I cannot do step 6 as my TWRP is not working any more.
The remaining procedure I already did with 2 different daisy images V10.0.18.0 and 10.0.3.0.
In both cases the stock ROM was installed but the phone didn't finish to boot.
Why do you think it would be different if I use V10.0.9.0?
You said you fix frozen TWRP restarting the phone and re-openning the powershell in adb. My phone did not restart and adb does not work.
I was thinking I did not try to install stock image using MiFlash tool. I can do it if I get a windows computer available.
I saw people suggesting fastboot oem edl but I could not find a clear explanation of the procedure.
I understood that I must use MiFlash in that case too but the steps are not clearly defined and I need a windows computer anyway.
Does someone have a step by step to use fastboot oem edl?
renatogui said:
I'm afraid I cannot do step 6 as my TWRP is not working any more.
The remaining procedure I already did with 2 different daisy images V10.0.18.0 and 10.0.3.0.
In both cases the stock ROM was installed but the phone didn't finish to boot.
Why do you think it would be different if I use V10.0.9.0?
You said you fix frozen TWRP restarting the phone and re-openning the powershell in adb. My phone did not restart and adb does not work.
Click to expand...
Click to collapse
No particular reason behind 10.0.9.0 ... I just had that uploaded to my drive and when I posted this to another forum I didn't wanted to "waste" time to search for a link so I just used mine. Anyways u have to wipe your phone before installing stock rom.
The way I fixed mine is not working for you so Im afraid Im out of ideas.
Hope someone can help you out with it
thanks, anyway for your kind and quick answer.
I'd suggest giving MiFlash a try. Because a few times I tried flashing with the script file bundled with the stock ROM, I also had some bootloops, but MiFlash fixed the issue. When it comes to EDL flashing:
1 - Grab the 20160401 version of MiFlash from here : https://www.xiaomiflash.com/download/ (You need this version because it's the only MiFlash version that's capable of EDL flashing, mind you, you need a Windows PC and 64-bit hardware for this)
2 - Connect the phone in fastboot mode and type this command :
Code:
fastboot oem edl
Hit enter, this will take the phone into EDL mode, which means the screen will go black and the notification LED will start blinking.
3 - Now you're in EDL mode, open the MiFlash version I mentioned and Browse to find the location the stock ROM is stored, then hit refresh so that the software can recognize the phone.
4 - Hit flash to start flashing, but remember EDL flashing is a very fragile process, so make sure you don't lose power/shutdown the app while it's doing its job. After a successful flash, the app will say it is successful. Unplug the phone and start holding the power button to reboot. If you want to lock the bootloader, make sure to hold vol down as well and go into fastboot then re-lock the bootloader with :
Code:
fastboot oem lock
5 - Voila!
Thank you marstonpear for the detailed answer.
I will try MiFlash this evening and will post the result here.
I am very glad to count with more experienced people in fixing my errors.
Hello marstonpear,
I downloaded daisy image v10.0.13.0 that was suggested in XiomiFlash how to and try to flash it.
I got the error "mismatch image and device". This is very strange. Never had this before flashing with fastboot.
Do you think I could scrambled mi A2 lite so MiFlash cannot recognize it as a mi A2 lite anymore?
The only different think I did was interrupting my first flasing try using ^C when it was frozen.
I made 2 other tries after this with no errors. The only problem was the never ending boot.
My next try will be using image v10.0.18.0, the one I had installed before all this problems begin.
renatogui said:
Hello marstonpear,
Click to expand...
Click to collapse
marstonpear said:
I'd suggest giving MiFlash a try.
Click to expand...
Click to collapse
Quote marstonpear, like the quote above so that he get notification about your comment.
BTW, I never see this error before, you can try to google it.
coolwei1 said:
Quote marstonpear, like the quote above so that he get notification about your comment.
BTW, I never see this error before, you can try to google it.
Click to expand...
Click to collapse
I'm sorry. I tried hard how to quote and did'nt find.:cyclops:
I am almost learning...
marstonpear said:
I'd suggest giving MiFlash a try. Because a few times I tried flashing with the script file bundled with the stock ROM, I also had some bootloops, but MiFlash fixed the issue.
Click to expand...
Click to collapse
mismatched image and device error when MiFlashing image.
There are some sugestions about erasing the first 2 lines in flashing script ( where the daisy ROM is cheched in the image and the hardware) and flash again.
I am not sure this is a good idea. I'm affraid things could become worse.
But I am sure there is a Xiaomi Mi A2 Lite writen in the phone box and the image I used was daisy_global_images_V10.0.13.0.PDLMIXM_20190813.0000.00_9.0_5d0d486f04
What is next step?
renatogui said:
mismatched image and device error when MiFlashing image.
There are some sugestions about erasing the first 2 lines in flashing script ( where the daisy ROM is cheched in the image and the hardware) and flash again.
I am not sure this is a good idea. I'm affraid things could become worse.
But I am sure there is a Xiaomi Mi A2 Lite writen in the phone box and the image I used was daisy_global_images_V10.0.13.0.PDLMIXM_20190813.0000.00_9.0_5d0d486f04
What is next step?
Click to expand...
Click to collapse
If you're sure your device is daisy - Mi A2 Lite, you can delete the first line of the .sh or .bat to skip verification. Simplest way to verify your device is indeed Mi A2 Lite is checking the back cover of the phone and seeing the androidone logo there. If the logo is there go on with the procedure of deleting the first line of the code, then flashing it. Never interrupt the flashing process as it may cause the device's hardware to fail afterwards. I'd suggest using 10.0.13.0 for flashing as that one is the latest ROM that's provided as full version by Xiaomi. If you're still using Linux/MacOS to flash the firmware, I had an issue before on my Mac that didn't let me flash the stock ROM: flash_all.sh was wrongly formatted, so I had to add "./" (dot slash without the quotation marks) to the beginning of every line in the code that began with "fastboot" to make it work.
TL;DR : If device is daisy and you're on Windows, delete the first line and try again. If device is daisy and you're on Linux/MacOS, add "./" in front of every line that starts with "fastboot" in flash_all.sh
marstonpear said:
If you're sure your device is daisy - Mi A2 Lite, you can delete the first line of the .sh or .bat to skip verification. Simplest way to verify your device is indeed Mi A2 Lite is checking the back cover of the phone and seeing the androidone logo there. If the logo is there go on with the procedure of deleting the first line of the code, then flashing it. Never interrupt the flashing process as it may cause the device's hardware to fail afterwards. I'd suggest using 10.0.13.0 for flashing as that one is the latest ROM that's provided as full version by Xiaomi. If you're still using Linux/MacOS to flash the firmware, I had an issue before on my Mac that didn't let me flash the stock ROM: flash_all.sh was wrongly formatted, so I had to add "./" (dot slash without the quotation marks) to the beginning of every line in the code that began with "fastboot" to make it work.
TL;DR : If device is daisy and you're on Windows, delete the first line and try again. If device is daisy and you're on Linux/MacOS, add "./" in front of every line that starts with "fastboot" in flash_all.sh
Click to expand...
Click to collapse
Yes, there is the androidone logo in the back.
I had to interrupt the flashing the very first time because it stop before end like frozen.
You say I can damaged the hardware doing this?
renatogui said:
Yes, there is the androidone logo in the back.
I had to interrupt the flashing the very first time because it stop before end like frozen.
You say I can damaged the hardware doing this?
Click to expand...
Click to collapse
Yes the flash storage on the phone can be damaged just by interrupting the flashing process, especially while EDL flashing. So make sure you kill other unnecessary processes on your PC before you start flashing so it does not hang again.
marstonpear said:
If you're sure your device is daisy - Mi A2 Lite, you can delete the first line of the .sh or .bat to skip verification.
TL;DR : If device is daisy and you're on Windows, delete the first line and try again. If device is daisy and you're on Linux/MacOS, add "./" in front of every line that starts with "fastboot" in flash_all.sh
Click to expand...
Click to collapse
Now I know the reason of mismatching. All the scripts bundled with Xiaomi_Mi_A2_Lite_V10.0.13.0.PDIMIXM_20190807.0000.00_Global_9.0_XFT are made for jasmine. I will find another image more trustworthy than this one.
marstonpear said:
Yes the flash storage on the phone can be damaged just by interrupting the flashing process, especially while EDL flashing. So make sure you kill other unnecessary processes on your PC before you start flashing so it does not hang again.
Click to expand...
Click to collapse
I used the image v10.0.13.0 from https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
I check the scripts to verify if they are for daisy and flashed using MiFlash20191206.
At the end I got this error:
Not catch checkpoint [\$fastboot -s.*lock] .flash not done
:crying:
renatogui said:
I used the image v10.0.13.0 from https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
I check the scripts to verify if they are for daisy and flashed using MiFlash20191206.
At the end I got this error:
Not catch checkpoint [\$fastboot -s.*lock] .flash not done
:crying:
Click to expand...
Click to collapse
for others having the same probem I've learn in another thread that this error is issued because I did not choose the lock option below right of MiFlash tool. That is why it didn't catch the lock checkpoint. But the end of the message is not true because at this checkpoint, the flashing is already done. I simply turn the phone off and on again and the boot was normal.
Thanks for all that help me specially marstonpear.
Thread closed... until next problem.

Categories

Resources