I've noticed with my GNEX that it seems like all of the sudden it won't auto dim. When I unlock the device it will brighten if needed, however if I walk into a dimmer area it will not auto dim. Is this the normal behavior for the light sensor?
I'm used to my Xperia Play which would constantly adjust the screen up and down.
My auto-brightness setting sets the screen brightness lower than the lowest actual brightness setting regardless of whether I'm in light or dark.
There's a fix for it here: http://forum.xda-developers.com/showthread.php?t=1377410&highlight=auto+screen+brightness
I haven't tested that out though.
Kinbote said:
My auto-brightness setting sets the screen brightness lower than the lowest actual brightness setting regardless of whether I'm in light or dark.
There's a fix for it here: http://forum.xda-developers.com/showthread.php?t=1377410&highlight=auto+screen+brightness
I haven't tested that out though.
Click to expand...
Click to collapse
Yea I was worried maybe the brightness sensor was not working since. Turns out my wife's droid 2 with CM7 acts the same way. Lowest setting until you unlock at which time it only increases the brightness, never decreasing.
I've seen a couple posts about delays with adaptive brightness, but this is a different item. I'm seeing that the adaptive brightness alters the brightness a little too dramatically. In a somewhat dark room (not pitch black) the brightness will be at absolute minimum even when the brightness is about 1/3 up on the slider. In a moderately bright room that same brightness setting will be near maximum.
Does anyone else notice this as an issue? I'm just wondering if it's normal (ie, software calibration issue) or if the brightness sensor might not be seated correctly.
It's normal. Or at least it sounds like it is working the same way mine is. And yes, IMO it is a little too sensitive. The Lux app works beautifully if you want an alternative. Also, the goog is known for tweaking this feature over time with updates.
I've noticed this too. The biggest thing for me is walking down the street at dusk (so not dark out yet) I can't read the screen as it turns it all the way down, then, when I walk under a street light, it turns it all the way up to full! It's one extreme or the other, there seems to be no middle ground.
In other words "adaptive brightness has mind of its own!"
This is why I have always kept this setting off. The brightness just changing on its own always annoyed me.
When it works properly (and it should) for ones uses, it's great, it's automatic, what's not to like? It's a pita to always have to change brightness manually just to see a phone display depending on ambient lighting which varies immensely for many users.
jbdan said:
When it works properly (and it should) for ones uses, it's great, it's automatic, what's not to like? It's a pita to always have to change brightness manually just to see a phone display depending on ambient lighting which varies immensely for many users.
Click to expand...
Click to collapse
I agree. I have it set to maybe around 15-20% (centered over the WiFi symbol below it) and I never need to touch it. Gets dark enough for night driving and bright enough to read outside. Never found it stuck on one or the other when it shouldn't be.
Sent from my Nexus 5X using Tapatalk
If you buy the app Lux you can customize how it adapts your brightness. The free version is good to but you have to use mostly default settings. By default it only adapts brightness when the screen turns on.
I leave my phone set for Adaptive Brightness.
First, it's annoying that setting the manual brightness to max and then turning on Adaptive Brightness means that I can't achieve super dim display in dark.
Anyhow, so I leave my phone set to Adaptive Brightness all the time.
And it usually adjusts my display bright or dim(ish) as needed.
Then randomly it'll just go to the absolute dimmest setting and stay there even after a reboot.
I have to toggle Adaptive Brightness off and back on again.
Anyone else seeing this behavior?
I think it's time to give Lux Brightness app another shot.
Hopefully they've worked out the bugs since the last time I used it.
CZ Eddie said:
I leave my phone set for Adaptive Brightness.
First, it's annoying that setting the manual brightness to max and then turning on Adaptive Brightness means that I can't achieve super dim display in dark.
Anyhow, so I leave my phone set to Adaptive Brightness all the time.
And it usually adjusts my display bright or dim(ish) as needed.
Then randomly it'll just go to the absolute dimmest setting and stay there even after a reboot.
I have to toggle Adaptive Brightness off and back on again.
Anyone else seeing this behavior?
I think it's time to give Lux Brightness app another shot.
Hopefully they've worked out the bugs since the last time I used it.
Click to expand...
Click to collapse
I've not had any issues with mine, do you have a tempered glass screen protector that covers the sensor on the front of the phone? It may be detracting light confusing the sensor.
Nope, no covers. Nekid phone here.
With adaptive brightness on my screen frequently (every 20 seconds or so) changes brightness slightly even when the ambient light isn't changing. It's very annoying when reading and most noticeable with light backgrounds.
Is this a common issue or does it sound like I have a defective sensor?
dmacarth said:
With adaptive brightness on my screen frequently (every 20 seconds or so) changes brightness slightly even when the ambient light isn't changing. It's very annoying when reading and most noticeable with light backgrounds.
Is this a common issue or does it sound like I have a defective sensor?
Click to expand...
Click to collapse
Same here.
So annoying I had to turn adaptive off.
Seems to be when I move, probably changing sensor and it's too sensitive. My head mush change/reflect light on sensor
Anyway it's so distracting that I can't use adaptive brightness, except when pitch dark I can set to 0% adaptive to have lowest light output
Sent from my Pixel 2 XL using Tapatalk
Yep, reminds me of a disco strobe light!
No issues here. I actually think the brightness swing is much better than the OG Pixel XL. I can just leave the setting at 50%. On the OG XL I'd have to turn the brightness down in the living room with lighting from 1 lamp and a tv because it'd be burning my retinas.
I installed Lux Dash and disabled "adaptive brightness" and let Lux handle it. You can go into the profile editor for Lux and setup different presets for different levels of light, you can also adjust the min and max allowed brightness and even setup how you want it to adjust brightness (fade, only set on unlock, dynamic, etc)
It has really made this screen amazing and even helps with battery because most the day my screen doesn't go above 15-20%
AndrasLOHF said:
No issues here. I actually think the brightness swing is much better than the OG Pixel XL. I can just leave the setting at 50%. On the OG XL I'd have to turn the brightness down in the living room with lighting from 1 lamp and a tv because it'd be burning my retinas.
Click to expand...
Click to collapse
I've been fine here with the Adaptive Brightness too. Doesn't change too often at all for me.
Sent from my Pixel 2 XL using Tapatalk
I installed Lux also and that did the trick. I assume the sensor is fine since Lux uses it with no problem. It's odd that some of us are having problems and others aren't but it doesn't seem to be a sensor issue.
Having this same issue any solution?
Mzzyhmd said:
Having this same issue any solution?
Click to expand...
Click to collapse
I'm curious but how exactly is it reacting for you? Are you just sitting in bed with the lights on and it's still adjusting up and down the brightness? Cause that's what I'm doing right now and it hasn't fluctuated at all. If I put it on the bedside table it'll brighten up and when I pick it up it dims but that's it.
Sent from my Pixel 2 XL using Tapatalk
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Mzzyhmd said:
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Click to expand...
Click to collapse
I'm curious to hear what the tell you. Lux has helped me a lot bit I still notice it. To be fair I think I only notice in a dim or dark room with the TV on but this is the first phone I've used where it's noticeable to me. I'm also wondering if this is how it's supposed to work or if there's something wrong with my phone.
Mzzyhmd said:
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Click to expand...
Click to collapse
What I described was too much? Sounds appropriate to me. If there's extra light on the phone, I want it to get brighter. If that light goes away, I want it to get dimmer. Now if it was happening with no light changing then I would be annoyed. I keep it at 29% with Adaptive Brightness on and it's not too dark in outside light and not too bright in pitch dark.
Sent from my Pixel 2 XL using Tapatalk
I'm having the same issue. I'm on my second Pixel 2 XL so I don't think it's a sensor problem. I only notice it in lower lighting but it's really annoying when it happens. Haven't seen this issue on any other phone. Im trying out Lux now and set it to only adjust when waking up. There were similar issues when Lux was set to Dynamic.
Ever since Google thought they knew better than everyone else and got rid of auto brightness for adaptive brightness, it's been trash for me. I CONSTANTLY have to raise it in dark rooms and lower it in bright rooms. AKA, I might as well turn it off because I'm manually adjusting it every time anyway.
All in all, it's terrible.
Hobox10 said:
Ever since Google thought they knew better than everyone else and got rid of auto brightness for adaptive brightness, it's been trash for me. I CONSTANTLY have to raise it in dark rooms and lower it in bright rooms. AKA, I might as well turn it off because I'm manually adjusting it every time anyway.
All in all, it's terrible.
Click to expand...
Click to collapse
You know Adaptive Brightness is a mix of manual and auto brightness right? I remember auto brightness actually having the issues you're describing because there was no way to adjust it if it was set. If you have Adaptive Brightness on high enough, it should be bright enough in dark and bright situations. I believe people's issues are that it adjusts too often or the opposite, it's too dark in light rooms and too bright in dark rooms.
EeZeEpEe said:
You know Adaptive Brightness is a mix of manual and auto brightness right? I remember auto brightness actually having the issues you're describing because there was no way to adjust it if it was set. If you have Adaptive Brightness on high enough, it should be bright enough in dark and bright situations. I believe people's issues are that it adjusts too often or the opposite, it's too dark in light rooms and too bright in dark rooms.
Click to expand...
Click to collapse
Yeah I know it's supposed to be a mix somewhat. It's supposed to match the setting you set to whatever the surrounding brightness is relative to your brightness setting.
That's exactly WHY it's trash in my opinion though. It's a flawed methodology. I don't want it matching my setting relative to anything. I want it low in the dark and bright in bright rooms or the sun to be legible and not more. It tries to do some meet-you-in-the-middle garbage and it just doesn't work well.
Hobox10 said:
Yeah I know it's supposed to be a mix somewhat. It's supposed to match the setting you set to whatever the surrounding brightness is relative to your brightness setting.
That's exactly WHY it's trash in my opinion though. It's a flawed methodology. I don't want it matching my setting relative to anything. I want it low in the dark and bright in bright rooms or the sun. It tries to do some meet-you-in-the-middle garbage and it just doesn't work well.
Click to expand...
Click to collapse
I found the threshold for the lowest brightness in pitch dark with Adaptive Brightness on to be 29%. That should be dark enough in dark rooms and outdoors it's readable to me. What percentages have you been trying?
Mines doing the same thing. Did anyone work out whether it was hardware?
I used a sensor app to see what light was reporting, and it was stable. I can only assume it's a bug.
For those who aren't sure - if the screen is on, and not moving, without any changes to ambient or direct light, every 20 or so seconds the screen will dim to a warmer colour, and then 20 seconds later will brighten to a whiter colour.
superbestfriends said:
Mines doing the same thing. Did anyone work out whether it was hardware?
I used a sensor app to see what light was reporting, and it was stable. I can only assume it's a bug.
For those who aren't sure - if the screen is on, and not moving, without any changes to ambient or direct light, every 20 or so seconds the screen will dim to a warmer colour, and then 20 seconds later will brighten to a whiter colour.
Click to expand...
Click to collapse
Yeah I had a feeling that's what people might be experiencing.
To add on to this thread, this is also occuring on my gen 1 Pixel.
Ever since I upgraded to 8.1 the adaptive display will brighten/darken while the phone is sitting still in a constantly lit room.
I also appear to have lost much of the granularity in the brightness selecting bar. The first 25% or so is as dim as it goes, and only after that does it begin to alter the brightness. Previously it would begin around 10% on the bar.
Additionally, the logic behind adaptive brightness seems to have gotten worse. I previously left my brightness setting always in the same place, and no matter where I was it was either dim enough (at night) or bright enough (during the day).
Real unhappy with this update.
Worked Perfectly fine on Oreo but ever since the update when unlocking the screen Display Brightness goes to 0 if i have adaptive brightness on.
anyone else having the issue? so far only solution is to turn that feature off
jasonx3 said:
Worked Perfectly fine on Oreo but ever since the update when unlocking the screen Display Brightness goes to 0 if i have adaptive brightness on.
anyone else having the issue? so far only solution is to turn that feature off
Click to expand...
Click to collapse
+1
You will have to keep the feature on and keep on correcting brightness when it's too low, until the system finally understands your preferences
It took me almost 2 full days constantly playing with brightness slider, but now it's all good :good:
Seems that brightness artificial inteligence is a bit lazy....
Mellow971 said:
You will have to keep the feature on and keep on correcting brightness when it's too low, until the system finally understands your preferences
It took me almost 2 full days constantly playing with brightness slider, but now it's all good :good:
Seems that brightness artificial inteligence is a bit lazy....
Click to expand...
Click to collapse
really? that's a lot of work for someone who unlocks the screen too often. i prefer older auto brightness where you set a base amount and forget it.
jasonx3 said:
really? that's a lot of work for someone who unlocks the screen too often. i prefer older auto brightness where you set a base amount and forget it.
Click to expand...
Click to collapse
I agree with you, I think that the learning is a bit long and I don't understand the need to always go back to zero (it's painful)
But I must admit that once the system is calibrated, it is more efficient than the older one
This is because it is based not only on the ambient light, but also on your personal preferences.
Give it a try, If you unlock your phone very often it should take less time...
Pixel ambient services
I did not have this problem at all after updating to Pie. I never had to manually readjust.
Maybe try to train you light sensor by placing it under bright light (it should then be on the highest brightness) and afterwards in complete darkness (brightness should be lowest now).
After having witnessed very bright light and complete darkness, the sensor should already have it's baselines and should actually switch accordingly.
However if you for any reason still don't like the low brightness in dark rooms you would obviously do that manually.