I bought my F900F from Thailand, and I stay in India, I downloaded the firmware from the Sammobile and flashed using ODIn but no luck I am still on Thai Firmware not Indian but whereas on the Sammobile site it says for India.
Can anyone guide me or help me. I want Indian firmware as For Samsung Pay and other things are much different for 2 regions.
deadlyheart4u said:
I bought my F900F from Thailand, and I stay in India, I downloaded the firmware from the Sammobile and flashed using ODIn but no luck I am still on Thai Firmware not Indian but whereas on the Sammobile site it says for India.
Can anyone guide me or help me. I want Indian firmware as For Samsung Pay and other things are much different for 2 regions.
Click to expand...
Click to collapse
I'll try to help you. Please tell me the exact steps you took to flash the firmware including what Odin said when the flashing was complete.
seh6183 said:
I'll try to help you. Please tell me the exact steps you took to flash the firmware including what Odin said when the flashing was complete.
Click to expand...
Click to collapse
I just waited it for to reboot and started normal, i didn't do anything else but it was the same for Thailand only.
Exact steps:
I downloaded the INU firmware from sammobile
ODIN 3.1.3
Put the extracted files in AP / CP / BL/ CSC
Ran the update
It happened and completed -> Pass
Then i waited for phone and it was still Thai Firmware.
deadlyheart4u said:
Exact steps:
I downloaded the INU firmware from sammobile
ODIN 3.1.3
Put the extracted files in AP / CP / BL/ CSC
Ran the update
It happened and completed -> Pass
Then i waited for phone and it was still Thai Firmware.
Click to expand...
Click to collapse
Hi, friend!
Do you have call record on Thai Firmware?
Yes I do
https://www.dropbox.com/s/ht6dsgvn8dbpvbd/Screenshot_20191108-071348.jpg?dl=0
https://www.dropbox.com/s/l1cmyj7pkbfhv4h/Screenshot_20191108-071330.jpg?dl=0
I'd like to change region. How to do that? Any idea, anybody?
i dont think anyone has any answer.
deadlyheart4u said:
I bought my F900F from Thailand, and I stay in India, I downloaded the firmware from the Sammobile and flashed using ODIn but no luck I am still on Thai Firmware not Indian but whereas on the Sammobile site it says for India.
Can anyone guide me or help me. I want Indian firmware as For Samsung Pay and other things are much different for 2 regions.
Click to expand...
Click to collapse
Didn't you ask the same question on SamMobile?
You can't change the CSC from Thailand (THL) to India (INU)
henklbr said:
Didn't you ask the same question on SamMobile?
You can't change the CSC from Thailand (THL) to India (INU)
Click to expand...
Click to collapse
Cant it be done anyway, I am really unable to use samsung pay.
Up theme
Related
Hi my phone is galaxy A520F the first version of my mobile was from Afghanistan country then i installed India Firmware now my phone is Full Indian and i download Afghanistan country firmware and Odin3 Says Fill how can i fix it.
Please help
Kashif.abobker said:
Hi my phone is galaxy A520F the first version of my mobile was from Afghanistan country then i installed India Firmware now my phone is Full Indian and i download Afghanistan country firmware and Odin3 Says Fill how can i fix it.
Please help
Click to expand...
Click to collapse
the indian version of the firmware is newer than the afghan. wait until afghan get update and you'll be ok to flash...
Nougat
When my device A520F Gets nougat??
Nougat should come late July / early August
hi guys, i first installed the russian Nougat update because in germany (DBT) it wasnt out like 2 weeks ago.
So now it's out and i flashed the original german one over it with wiping everything. So far so good. The problem that i have now is that my orginal CSC "DBT" isn't activated.... it automatically installed the "BTU" CSC (UK)
My question now: How can i change back to DBT? I flashed the german CSC again but i doesn't seem to work that way :/ I added some screenshots from Samsung Phone Info App. The Original CSC-Code line is also blank whyever....
thx in advance!
https://forum.xda-developers.com/showpost.php?p=43553707&postcount=14 if it doesn't work i have another method
the same thing with my phone (i have flashed an XEF )
but this csc is not important at all .....
-You have german language
-the playstore have the same apps
- you have the same samsung fonctions apps and parameters .
-the modem have the same European bands
.....
Yeah i flashed the Portuguese rom and somehow got the sloveanian csc. I tried using the method above for changing but it didnt work. It doesnt matter, its the same stuff anyway.
The other method is to flash a single CSC rom and after flash DBT CSC
Chaos107 said:
The other method is to flash a single CSC rom and after flash DBT CSC
Click to expand...
Click to collapse
I know that but where will i download the portuguese rom? I cant from sammobiel at 15kb/s. Im kinda screwed. **** it my phone is slovenian now, i have a new nationality **** it.
StewieTech said:
I know that but where will i download the portuguese rom? I cant from sammobiel at 15kb/s. Im kinda screwed. **** it my phone is slovenian now, i have a new nationality **** it.
Click to expand...
Click to collapse
try to download firmware from here at fullspeed: http://updato.com/firmware-archive-select-model
or here http://live.samsung-updates.com/index.php?device=SM-A520F if you got a premium account from uploaded.net or rapidgator
ill try one of the methods now and i'll report my result than
warboss said:
try to download firmware from here at fullspeed: http://updato.com/firmware-archive-select-model
Click to expand...
Click to collapse
Ah cool bro, thanks!
That's really weird. I installed the german Vodafone software and get this:
warboss said:
hi guys, i first installed the russian Nougat update because in germany (DBT) it wasnt out like 2 weeks ago.
So now it's out and i flashed the original german one over it with wiping everything. So far so good. The problem that i have now is that my orginal CSC "DBT" isn't activated.... it automatically installed the "BTU" CSC (UK)
My question now: How can i change back to DBT? I flashed the german CSC again but i doesn't seem to work that way :/ I added some screenshots from Samsung Phone Info App. The Original CSC-Code line is also blank whyever....
thx in advance!
Click to expand...
Click to collapse
Can you please tell me what is your Knox Warranty Void status after all that flashing? I'm concerned about warranty if I flash german firmware which doesn't have the same csc as mine.
Loulou-13 said:
the same thing with my phone (i have flashed an XEF )
but this csc is not important at all .....
-You have german language
-the playstore have the same apps
- you have the same samsung fonctions apps and parameters .
-the modem have the same European bands
.....
Click to expand...
Click to collapse
Can you tell me your Knox Warranty Void status after flashing that?
marchoffmmann said:
Can you tell me your Knox Warranty Void status after flashing that?
Click to expand...
Click to collapse
my knox is OK ! not tripped... 0-0
i have flashed a "pure" official signed firmware, providing to sammobile beru safe and serious ...
I repeat for csc ! it's not important at all !!!! :angel:
i have an unbranded BTU (multi-csc) firmware ...
Loulou-13 said:
my knox is OK ! not tripped... 0-0
i have flashed a "pure" official signed firmware, providing to sammobile beru safe and serious ...
I repeat for csc ! it's not important at all !!!! :angel:
i have an unbranded BTU (multi-csc) firmware ...
Click to expand...
Click to collapse
Sorry for interuption, but i just want to confirm - you had French firmware and then you flashed Russian and then again went back to French and your original csc has changed during this but your warranty isnt void? Thank you very much.
marchoffmmann said:
Sorry for interuption, but i just want to confirm - you had French firmware and then you flashed Russian and then again went back to French and your original csc has changed during this but your warranty isnt void? Thank you very much.
Click to expand...
Click to collapse
sorry ,i didn't have precised ...
original provider firmware (sfr france) MM 6==> flash XEF unbranded MM6 firmware with odin providing to sammobile ( but it's a multi-csc firmware and BTU is the csc-master)==> i wait OTA for N7
But when i have flashed this MM unbranded ,i didn't have had problem with my knox
As i have said ,if you flash a FULL official signed firmware ,in theory it's ok :good:
same on me ! rom is from romania and csc is from CZ. what this means ? csc
if i downgrade to mm ? now from nougat
i need to tranfere from firmware Russia csc A720FOXY2AQF8 to firmware Egypt csc A720FOJV1AQF1 by using odin 3 but talled me that fail to complete.
how you figure out >!?
ehab rashad said:
i need to tranfere from firmware Russia csc A720FOXY2AQF8 to firmware Egypt csc A720FOJV1AQF1 by using odin 3 but talled me that fail to complete.
Click to expand...
Click to collapse
Use version A520FXXS2AQH1. it will work fine, Download from the following link:
https://www.sammobile.com/firmwares/galaxy-a5/SM-A520F/EGY/download/A520FXXS2AQH1/185136/
Hello
i don't know if this question was asked before i tried to search but nothing
i came from xperia xz and flashing was just as easy as downloading the FTF and flashing in flash mod
i bought my S9 that was stuck at 1 Dec 2018 software and no new updates are available (even with smart switch) to download so my best solution is to update it manually using ODIN
i used to have a galaxy gear watch and s5 and flashing was also simple but i came across a thread that said something about CSC Version and i am sacred that i may brick the phone while trying to update it
can someone point me in the right directions ?
my CSC : G960FOXM2CRLI
Service provider SW ver.
SAOMC_SM-G960F_OXM_KSA_PP_0002
KSA/EGY, EGY/XSG
baseband version
G960FXXU2CRLI
build number
PPR1.180610.011.G960FXXU2CRLI
and i live in egypt but the phone was sold is KSA if that's matters
any help please ?
thanks in advance
iSpammer said:
Hello
i don't know if this question was asked before i tried to search but nothing
i came from xperia xz and flashing was just as easy as downloading the FTF and flashing in flash mod
i bought my S9 that was stuck at 1 Dec 2018 software and no new updates are available (even with smart switch) to download so my best solution is to update it manually using ODIN
i used to have a galaxy gear watch and s5 and flashing was also simple but i came across a thread that said something about CSC Version and i am sacred that i may brick the phone while trying to update it
can someone point me in the right directions ?
my CSC : G960FOXM2CRLI
Service provider SW ver.
SAOMC_SM-G960F_OXM_KSA_PP_0002
KSA/EGY, EGY/XSG
baseband version
G960FXXU2CRLI
build number
PPR1.180610.011.G960FXXU2CRLI
and i live in egypt but the phone was sold is KSA if that's matters
any help please ?
thanks in advance
Click to expand...
Click to collapse
If there are no updated KSA firmwares for your S9, flash any CSC for the G960F, Germany (DBT ) has the latest June update
If you have KSA sim card need to flash KSA firmware with only Home CSC also and if you have EGY sim card and will come OTA downloads
KSA/KSA,KSA/XSG
PUMA007 said:
If you have KSA sim card need to flash KSA firmware with only Home CSC also and if you have EGY sim card and will come OTA downloads
KSA/KSA,KSA/XSG
Click to expand...
Click to collapse
Does not matter what SIM is in the phone
I have O2U SIM (United Kingdom) and DBT Firmware (Germany)
*Detection* said:
Does not matter what SIM is in the phone
I have O2U SIM (United Kingdom) and DBT Firmware (Germany)
Click to expand...
Click to collapse
And me i have XSG phone from dubai and i have SEE firmware and sim card and OTA update com ewry mounth
PUMA007 said:
And me i have XSG phone from dubai and i have SEE firmware and sim card and OTA update com ewry mounth
Click to expand...
Click to collapse
Well yes you need CSCs to match for OTA, but it is not necessary for normal usage, once my region releases the latest update I will flash back for OTA
so it's normal to flaash any firmware even if the CSC doesn't match? only the phone model number right? flashing on ODIN like thr normal way kust like the s5? nothing else need to be done ? like enabling/disabling stuff on developper options ? OEM unlock? sorry for my noobies questions
iSpammer said:
so it's normal to flaash any firmware even if the CSC doesn't match? only the phone model number right? flashing on ODIN like thr normal way kust like the s5? nothing else need to be done ? like enabling/disabling stuff on developper options ? OEM unlock? sorry for my noobies questions
Click to expand...
Click to collapse
Normal if your own region CSC has not updated their firmware yes, but you will not receive OTA updates until the CSCs match and will have to flash manually each update
There is a big thread about it so I'm not going to go into it in detail here, quick search should find what you need
Nothing else needed, boot to download mode and flash with Odin 3.13.1
Thank you
iSpammer said:
Thank you
Click to expand...
Click to collapse
Have a read through here, should help explain a few things
https://forum.xda-developers.com/galaxy-s9/help/changing-csc-s9-t3884699
Hi,
Can anyone upload Australian firmware for LTE version? I am stuck on R825FXXU1ASJ3 Sweden version. My samsung pay is not working.
Thanks
Australian Firmware
kazim.asghar said:
Hi,
Can anyone upload Australian firmware for LTE version? I am stuck on R825FXXU1ASJ3 Sweden version. My samsung pay is not working.
Thanks
Click to expand...
Click to collapse
I might have the current Australian csc rom with me and hopefully could share it with you but before that....
How do you plan to change it to Australia without changing the csc of watch via combination firmware which, apparently is not available as of now for the 825F model.
amandeepN4 said:
I might have the current Australian csc rom with me and hopefully could share it with you but before that....
How do you plan to change it to Australia without changing the csc of watch via combination firmware which, apparently is not available as of now for the 825F model.
Click to expand...
Click to collapse
I used a combination file from a paid website and it was a wrong file. It bricked my watch and I got it fixed from samsung under warranty. Can you share the firmware you have? Which one is it?
kazim.asghar said:
I used a combination file from a paid website and it was a wrong file. It bricked my watch and I got it fixed from samsung under warranty. Can you share the firmware you have? Which one is it?
Click to expand...
Click to collapse
Man I know the paid site all have the wrong combination files. They are cheating and misleading the people that too after taking money. I know what must have happened you flashed a 825U firmware which was listed under 825F section in that website.
Good for you were in warranty. Rest the firmware i had was the same OLB available on that website. So no use.
amandeepN4 said:
I might have the current Australian csc rom with me and hopefully could share it with you but before that....
How do you plan to change it to Australia without changing the csc of watch via combination firmware which, apparently is not available as of now for the 825F model.
Click to expand...
Click to collapse
Hi Aman, Do you rom for R825F OLB, can you share it?