Does this ROM support OTG? My first Noob flash to JT1510365's unofficial lineageos 15.1 went great. However, no OTG. App checkers show question marks (chainfire usb host diagnostics) or missing xml files using usb host check. Regular usb charging/adb commands work fine. Any suggestions? Otherwise what a great boost to slow tablet. N7 2013 32g. Hope ive finally posted in correct area.
Related
hi guys,
Is there anyway to enable usb host feature in htc one v, and is it possible to host a pen drive to it.
i m currently using ignorance rom v3 and tk kernel 3.0.16
thnxs in advance............
USB OTG? The Titanium-KISS kernel has that feature. Read in the thread about it.
MameTozhio said:
USB OTG? The Titanium-KISS kernel has that feature. Read in the thread about it.
Click to expand...
Click to collapse
Ok so titanium kiss has the feature to host usb. but how to enable it, i searched the net and found a software called usb host controller.
as instructed i installed busybox and tried to host a Toshiba 8 gb pendrive using otg cable.It is shows S3c driver is not installed, usb host is active though but in file manager there is no sign of usb. please help......!
Anyone know how to get USB Host to work on the SGH-i257m or any of it's redesignes?
You have to search for:
- a custom Kernel for your firmware version that is supporting USB-OTG
- a USB-OTG cable with external power
Sent from my black pearl using Tapatalk
I have already tested it with USB Host Diagnostics from the play store and im running Cyanogenmod on my phone.
Anyways the program said under ANDROID API I have the claims support and the classes were found but the device wasnt detected
Under KERNEL I have claims support but no device detected.
While under ROOTED API it says N/A for claims and device
So my question is Is there any way to activate Host Mode on the OS side or 3rd Party Wise?
IMHO the S4 mini has no hardware usb host controller.
You need "y otg cable" and external power and custom kernel
IMHO the latest cyanogenmod kernel probes for usb host hardware but says not found
The cyanogen kernel does not hace the otg support
If you have an "y cable" Try f4k kernel
So first of all, here's the disclaimer: I know NOTHING about building stuff, and I have a VERY slow network to even sync the sources required to make it on my own (I live off of 90KB/s)
For the past 2 days I've been banging my head into the wall trying to figure out a way to get my TP-LINK TL-WN321G to work on OOS or CM or a chrooted Kali Linux. Apparently some modules need to be configured into the OnePlus 3 kernel in order for the rt2501/rt2573 to be recognized by the device via USB OTG.
So the humble request is as follows: Is there ANYONE nice enough to actually sync a kernel source (OOS or CM13) and modify the kernel to support the modules necessary for all of this to work? If I can make a chrooted kali linux along with a working wifi adapter that supports monitor mode, I can practically ace my Senior Project.
Thank you!
Hi guys.
I have been working on a project to port NetHunter to Jiayu S3 (advanced for me , MT6752 platform) , working okay so far.
Tho I was still unable to start a new thread in DEVELOPMENT area . This is my first post in XDA. XDA helped me for many informations tho mostly all I care is the dev area so unable to say even a thank-you.
Any way I am here preparing to make a contribution for XDA. More talk with me so I can post the project earlier.
Kernel is modified and patched based on LoliTeam's project on Github.
mac80211 patched with script provided by Offensive-Security , HID manually patched regarding "Kernel-3.10-Nexus9.patch". Not exactly the same yet similar.
Additional Package of NetHunter is built under construction of [email protected]
Tested on AICP 6.0 UNOFFICIAL for JIAYU S3a MT6752 ( Should work on JIAYU S3 normal too I guess. never tried )
Progress:
OTG: Fix the 5V Power Supply for OTG so we can mount more than a USBdisk , like Mouse/Keyboard/JoyStick/WirelessAdapter , all avaliable now.
DuckHunter HID attack: working. Tho simple HID attack item didnt work , no idea why.
BadUSB MITM: RNDIS enabled. Capable to redirect the traffic of the computer you connected through your phone. (DHCPD on phone required, do it manually)
WiFi MITM: built-in wireless adapter does not support Monitor Mode so built-in Nethunter WiFi MITM does not work either. But we can do it manually , with a external USB via an OTG cable
Kali Chroot: Working
USBkeyboard(as HID device): Working
cSploit: Working
Shodan: Working
OpenVPN for Android: Working
VNC: Working
MSF: Working
Not working:
aircrack-ng toolkit: seldom working. But can be replaced by manually command.
War Driving: not working normally , because aircrack-ng. Not planning a fix.
Router Keygen: Only support built-in adapter. Giving it up.
Not tested:
RF Analyzer: No equipment. No plan on it.
Unsolved:
$ifconfig wlan1 mode monitor Wrong command but cause phone stuck (may be kernel panic)
Mana-Toolkit with wlan1 same , phone no responding. SO DO MITM MANUALLY , dont use mana.
Problems:
Battery Power is consumed faster.
Easier to heat up.
I think they are bearable
It has many drawbacks but still working great considering its condition.
Keep project on track:
@ https://github.com/offensive-security/kali-nethunter
@ https://github.com/DKingCN/nethunter-devices
@ https://github.com/DKingCN/android_kernel_jiayu_s3_h560
@ https://github.com/DKingCN/android-keyboard-gadget
Now you are able to build it on your own.
I will release it later when I got enough posts.
Thread closed by OP request.
Sup everyone,
I had this phone for 2 years before the wifi hardware died. It's rooted, twrp installed, everything works except wifi/bluetooth.
I don't use this phone for calls so no sim card no 3G or 4G that is.
So in the long search for alternate ways to get internet I came across several posts about using USB to ethernet adaptors, and that's what I've been trying to get for the past 3 days.
I have 2 USB to Ethernet adaptors Asix Ax88772C and Davicom DM9601 which I insert via a standard OTG adapter so they are not the ones that have the 5 pin USB (OTG like cable)
I've read that Asix is supported and built in G3 D855 kernel, OTG checker detects it but no internet whatsoever.
DM9601 is not supported by vanilla kernel so it's not detected (maybe because it's for Ax88772A and B not the C)
I have a kali linux and I installed all prerequisites to build kernel and modules so I tried compiling asix.ko usbnet.ko and dm9601.ko against various D855 kernels and tried several ready made D855 kernels too ..... everything ended up with errors when trying to insmod or modprobe the ko files
I really have tried everything to be tried and so my only hope is to flash a kernel with those modules built in namely usbnet asix and dm9601.
The kernel sources I'm using currently are the Navel-855 ones, and the kernel is also the latest Navel kernel.
Any help or guidance would be deeply appreciated
Tia
everything ended up with errors when trying to insmod or modprobe the ko files
Click to expand...
Click to collapse
Post the dmesg output, also try Omar's kernel (github.com/oxavelar/D85X-Kernel-Gamma)
Thanks!
I'll give it a shot as for dmesg output I'll post it when ready.
here's the log https://www.dropbox.com/s/mklm36wegzyxy4e/log.csv?dl=0
or here https://justpaste.it/1461v
amt000 said:
here's the log https://www.dropbox.com/s/mklm36wegzyxy4e/log.csv?dl=0
or here https://justpaste.it/1461v
Click to expand...
Click to collapse
Might sound dumb but, did you enable it in the defconfig?
waau said:
Might sound dumb but, did you enable it in the defconfig?
Click to expand...
Click to collapse
you mean while building the ko file or when installing it on the phone?
amt000 said:
you mean while building the ko file or when installing it on the phone?
Click to expand...
Click to collapse
Meant in the kernel defconfig, like so
CONFIG_USB_NET_DM9601=y
Seems like DM9601 is not set by default on most kernels
https://github.com/CAF-G3/kernel_lge_g3/blob/n-mr1/arch/arm/configs/lineageos_d855_defconfig#L1607
https://github.com/oxavelar/D85X-Ke...ch/arm/configs/lineageos_d855_defconfig#L1534
https://github.com/Team-OctOS-Devic.../arm/configs/cyanogenmod_d855_defconfig#L1529
https://github.com/LineageOS/androi...ch/arm/configs/lineageos_d855_defconfig#L1534
waau said:
Meant in the kernel defconfig, like so
CONFIG_USB_NET_DM9601=y
Seems like DM9601 is not set by default on most kernels
https://github.com/CAF-G3/kernel_lge_g3/blob/n-mr1/arch/arm/configs/lineageos_d855_defconfig#L1607
https://github.com/oxavelar/D85X-Ke...ch/arm/configs/lineageos_d855_defconfig#L1534
https://github.com/Team-OctOS-Devic.../arm/configs/cyanogenmod_d855_defconfig#L1529
https://github.com/LineageOS/androi...ch/arm/configs/lineageos_d855_defconfig#L1534
Click to expand...
Click to collapse
I followed this guide
https://forum.xda-developers.com/showthread.php?t=2131825
and yes used:
make menuconfig
[Navigate using arrow keys and enter]
Device Drivers ->
Network device support ->
USB Network Adapters ->
Multi-Purpose USB Networking Framework ->
[PRESS SPACEBAR until an M appears on the left]
[M] Multi-purpose USB Networking Framework
[M] ASIX AX88xxx Based USB 2.0 Ethernet Adapters
[M] DM9601 Based USB 2.0 Ethernet Adapters
then make && make modules and got the ko files in /kernel/drivers/net/usb/
weird thing I found now is that insmod or modprobe fail to load all the modules in /system/lib/modules
not just the ones I made. It seems something else if affecting my error