[Guide] How To Flash Oxygen OS Pie GSI on Realme 5 Pro - Realme 5 Pro Guides, News, & Discussion

[Guide] How To Flash Oxygen OS Pie GSI on Realme 5 Pro - Realme 5 Pro Guides, News, & Discussion

Screenshots
Click here to see all Previews
I tested this on Realme 5 Pro Indian variant, I am not sure if it's working for Realme Q ( china variant or not ) So try at own risk
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
Steps to flash oxygen os pie gsi
Download AB gsi from here
Download vbmeta (los vbmeta) and los boot.img
Oxygen OS GSI link will be updated when new update of gsi is available
Changelog of GSI
System
• Fixed an issue with Expanded Screenshots
• Updated Android security patch to 2019.10
• General bug fixes and improvements
_______________________________________________________________________________________
Follow GSI ROM flashing guide -->
Flash color os (if you aren't using cos already) (stock vendor is required that's why )
Flash twrp
Wipe data , cache , dalvik , system
Flash system.img (gsi )
Flash lineage os boot img
Flash lineage os vbmeta.img (if you didn't already flashed it, no need to flash this after changing rom everytime)
Reboot
Note:
If it boots back to recovery after rebooting then Format data and reboot (internal will be erased)
if it fails to boot into system factory reset it in twrp that should work ^_^
_______________________________________________________________________________________
Good Things :
Volte works
Safetynet passed without any modules
Bugs :
Same bugs as other gsi (Missing fingerprint, face unlock, bt audio calls and few more ? ?* )
The camera doesn't work in most apps
MTP works but shows internal-only
some third-party apps unable to detect and use sd card (MX player and few more)
No notch support ( So some test on the status bar is getting hidden in borders ;p )
Bugs with workaround :
Switch off or restart it will not work, just shows a blank screen
(Hold Power off + volume down + volume up for few seconds to power off )
Can't log into google play directly
Workaround :
Need to install play services apk inorder to log into Google account
Download from here
To get Camera Working
you can flash Oxy-ify Module from magisk it'll add oxygen os camera app so you can take pics with it. Gcams should work as well.
Mx player like apps unable to read/use sd card
Workaround: flash sdcard enabler magisk module
Go to mx player >> settings >> list >> folder >> add
/Mnt/media_rw/sdcard_id
Not a bug but screen resolution is different than our device but you can change that (this will be helpful in all gsi )
1) download termux app
https://play.google.com/store/apps/details?id=com.termux
2) run commands
Code:
su
wm size 1080x2340
3) reboot device
How to Root Any GSI ?
Flash UPDATE-unSU-signed.zip : Download from here
Flash Magisk ZIP : Download from here
Reboot into System
(install magisk apk manually if it doesn;t show up in app drawer )
Credits:
Thanks to all realme XT Telegram guys for sharing working Oxygen OS GSI and for providing some bug fixes
@THErealpisharody , @Nandha4a @Bava7325, @officialpro )
Thanks to @thesprintster for his hard work with Kernel Sources , Device tree ,For building Los and TWRP for us.
also for providing vbmeta and boot image.
Credits for all work go to Developers, Erfan GSI for making Oxygen OS GSI.
Do hit :good: If this guide helped you
Let me know if it works for you or not :highfive:
Don't expect much as it's GSI ;p read comments if there is any ;p
i'll keep updating post for new version and new bugs and workarounds ;p
let me know in comments if you notice anything that's not written in post

:fingers-crossed: post updated
I hope it helped someone try out and experience oxygen os :crying:
I'll keep updating all workaround and bug fixes i can try ?
This same guide and fixes will help Realme 5 pro and even realme XT users (just flash your device los vbmeta and los boot img)

Another bug workaround is First Touch. You can download init.target.rc from POSP thread and put a fix to /vendor/etc/init/hw or /system/etc/init and change permission to 0644 a.k.a rw-r-r-

Tegarcs142 said:
Another bug workaround is First Touch. You can download init.target.rc from POSP thread and put a fix to /vendor/etc/init/hw or /system/etc/init and change permission to 0644 a.k.a rw-r-r-
Click to expand...
Click to collapse
Thanks for reporting
i forgot to update that
You can Download and flash this zip and it'll fix it.
Works on all roms ^_^ , just made it twrp flashable
https://sourceforge.net/projects/rmx1971/files/Touch Fix Art_chan_Realme5pro.zip/download

is this thread still up, i'm stuck with my phone, it keep loading on the bootscreen, not going to set up screen any guide?

This thread is no longer required
As we have better oxygen os port now
https://telegra.ph/OxygenOS-for-realme-5-ProQ-RMX1971-By-Joji-Xavier-02-16

Related

[10.0][STABLE] AOSiP Quiche beta

Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27

Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?

gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended

When viperos q?

Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse

i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)

schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip

Thanks for the rom, what base is needed?, is November security patch?

Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work

opal06, kudos for signature spoofing built-in, I can use microG.

Can i update kernel to Celexas kernel v.2. (from devotag) ?

Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.

Plis build with nitrogen kernel

test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident

schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.

celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.

lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right

Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?

good job

I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP

GSIs fixed builds for hi6250 (emui8)

Havoc 3.0 Q gsi fixed build for Huawei P10 Lite
About
Originally Havoc 3.0 Q gsi based on v204 compiled by ExpressLuke , but for Hi6250 some bugs persist , so I managed to fix them and repacked the IMG then highly compressed.
Fixed
* Camera * media ( sound , video , YouTube ..) * NFC * battery usage * auto brightness * phone Info's ( build number , model , manufacturer , device name .. ) * added Havoc bootanimation .
Bugs
* Offline charging ( requires permissive kernel , Labyrinth kernel 2.0 by Dil3mm4 tested * Blurry can be fixed in phh treble settings > Huawei features > 3rd option ( disabling hwcomposer ).
Installation
* Extract img from xz archive * go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) * flash the image in system image partition * flash root (optional) NOTE1: If you are coming from Android 9 flashing root is a MUST DO ! NOTE2: Flash only the Magisk zip linked in this post ! * reboot to System * reboot to TWRP * flash gapps (optional) * Enjoy !!!
Download
https://mega.nz/#!2S4xxQ6C!f0KJlCA_9_yyJzWZAtlNYVJHktSuyyFY7p82kXK4caM
Twrp recommended ( by @Pretoriano80 ):
https://mega.nz/#!LLhBXSzY!3runNNoW9z1tOHSu-heIUhyy-4u8XHvc8rZMsn547so
Magisk.phh:
https://mega.nz/#!uX4k1KjS!2gnUV3IyLt8XXf4NO3RyZEJnt5YNJQ8tY9i11oGfKYM
Credits: @phhusson ExpressLuke @haky 86 @DarkJoker360 @Dil3mm4
Regards!
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x,bootloader unlocked and TWRP
Based On: AOSP
Version Information
Status: Stable
Created 2019-12-01

6 hrs SoT

Hami_Do said:
6 hrs SoT
Click to expand...
Click to collapse
Wow that's really impressive for a 3000 mAh device! Many people aren't getting that on the Note 10 Plus!

Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?

TureX said:
Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?
Click to expand...
Click to collapse
No, it's simply Havoc GSI with several fixes included especially for our device/platform and no, gapps are not included (you would have known if you read the first post more carefully )

TureX said:
Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?
Click to expand...
Click to collapse
For gapps , pico worked for me as it should , from here :
https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/

Hami_Do said:
For gapps , pico worked for me as it should , from here :
https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/
Click to expand...
Click to collapse
Hi! I Guess for Who hasn't a working twrp Is not possible to flash gapps. Thanks for your work and sorry for my english

TureX said:
Hi! I Guess for Who hasn't a working twrp Is not possible to flash gapps. Thanks for your work and sorry for my english
Click to expand...
Click to collapse
the suggested twrp in first post works perfectly on most hi6250 ( emui 8 ) , plus it has an option ( exclude OEM path from data wipe ) from there you don't need to format data & internal storage to boot any gsi/dssi AFAIK.
Only sometimes installing gapps requires resize system from advanced wipe menu.

thanks.. any build for havoc 2.9 ?

How can I remove the bottom pad that appears when I want to use the keyboard?

itsm03 said:
thanks.. any build for havoc 2.9 ?
Click to expand...
Click to collapse
the best 2.9 build here:
https://sourceforge.net/projects/ha...90912-phhgsi_arm64_a-Official.img.xz/download
1- wipe system data cache
2-flash havoc 2.9 and boot up to system
3- reboot to twrp and :
4- flash offline charger fix for pie
5- flash nfc patch for pie
6- flash hwcomposer ( follow instructions )
7- flash gapps and magisk ( optional )
Enjoy.
All flashable patches you find them here:
https://forum.xda-developers.com/p10-lite/how-to/gsis-manual-fixes-hi6250-devices-t3936745
ghassan haddad said:
How can I remove the bottom pad that appears when I want to use the keyboard?
Click to expand...
Click to collapse
Join https://t.me/hi6250group telegram group , there you can share your screenshots to understand the issue.

Hami_Do said:
Join https://t.me/hi6250group telegram group , there you can share your screenshots to understand the issue.
Click to expand...
Click to collapse
I Couldn't post pictures since new members need to wait, add to that I got only one answer telling me that it may not be possible.
I was referring to this pad in the picture

Now Gsi's based on v207 and later are stable , here you find latest Havoc Q gsi :
https://sourceforge.net/projects/expressluke-gsis/files/HavocOS/Ten/ARM64/A/
Probably only NFC patch is needed :
https://forum.xda-developers.com/p10-lite/how-to/gsis-manual-fixes-hi6250-devices-t3936745/page3
=========

No way to boot on my phone (WAS-LX1A)...stuck on boot, after some minutes its reboot, other minutes and then goes in erecovery.
I tried also a totally clean install starting with last firmware stock (WAS-LX1AC432B390) install (dload method) and then flashing Havoc 3.0 (based on v207) system file from fastboot.
Nothing to do and I came back beaten to Android 8.0
.....any help pls?
or maybe it is easier to buy a P30 lite
Tx
Toti

Achieve is currupt :-/

i get Error while flashing image, here is the log

Erro 255
I get error while flashing image here is the log

I have the saame problem on WAS-LX1
anvetoti said:
No way to boot on my phone (WAS-LX1A)...stuck on boot, after some minutes its reboot, other minutes and then goes in erecovery.
I tried also a totally clean install starting with last firmware stock (WAS-LX1AC432B390) install (dload method) and then flashing Havoc 3.0 (based on v207) system file from fastboot.
Nothing to do and I came back beaten to Android 8.0
.....any help pls?
or maybe it is easier to buy a P30 lite
Tx
Toti
Click to expand...
Click to collapse
Any help?
Help this guy and me, please!

From my experience with flashing this device it is most likely that either your device is still encrypted or there are magisk leftovers or data partition wasn't wiped correctly, that's causing rom not to boot. And always use pretoriano's twrp_0.5_test, works best. Sometimes it boots to erecovery, but you can try to reboot and it might work then.

NeoPreacher said:
From my experience with flashing this device it is most likely that either your device is still encrypted or there are magisk leftovers or data partition wasn't wiped correctly, that's causing rom not to boot. And always use pretoriano's twrp_0.5_test, works best. Sometimes it boots to erecovery, but you can try to reboot and it might work then.
Click to expand...
Click to collapse
I think you're right, I also think it's due to encryption or data partition (not magisk because I made a clean installation), because I had the same problem, stuck on boot, with all the Roms (PIE and Q) that require TWRP.
The only rom without problems was OpenKirin-OmniROM Pie Alpha 6.2 which does not require a custom recovery for installation !!
Do you have any operational suggestions to give me or I just have to try with pretoriano's twrp_0.5_test ??
What do you think if :
- In a stock recovery I do a factory reset
- From fastboot I do fastboot erase system, userdata and cache (or better to use format command for userdata?)
- the I flash system.img
- then I flash TWRP
- and then install magisk and gapps from TWRP?
TX

[SGSI][Pie][Semi-bugless]MIUI 11

Welcome to MIUI sGSI For Galaxy J7 2017
TESTED ON J730X
Some information you should know..
This is a fully working MIUI sGSI with Android version 9.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
I don't own any files here, except patch files.
So, we are here with sGSI. It's normally called "unstable" and "not for daily usage" so users are recommended to go for GSI. But GSI lacks features and has AOSP-like design that some users may be bored of that. And now we finally break that law. sGSI can now be used as daily drivers.
As the nature of these sGSI go, it was a non stop battle for almost 3 weeks straight to get it to this point where all features are working as expected. if you appreacite this work Hit the Thanks button
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES:
Based on MiuiMiX 11 by MMX Team 9.12.26 using ErfanTools
Android 9.0
MIUII 11 Features
Semi-SIM support (Currently one SIM only)
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full MIUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Kernel:
You can choose either latest CronosKernel by @ananjaser1211, or KRAKEN kernel by @SPARTANICUS
Install steps:
ensure you have LATEST TWRP from Here
Download all the files in the DOWNLOAD section
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash Project Spaget 3.0 (not X!) here and follow the steps there.
Flash MIUI-Aonly-9-20191230-ErfanGSI.img to SYSTEM
Flash your desired kernel, either Cronos or KRAKEN (must be using Treble version)
[IMPORTANT] Flash Magisk in order to have patch working
Flash sGSI-Patch.zip
Flash NFC Patch
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
Install Google Play Services apk in Downloads section in order to get setup working
Setup your rom and READ the F.A.Q for more information.
BUGS:
Signal bar doesn't work (always empty) but it's acturally working
FM Radio (No FM Radio app in image)
Only one SIM is working at the moment
VoLTE not working (need another fixes)
SCREENSHOTS:
Imgur
CREDITS:
IF you helped in this GSI and i forgot you, tell me in a PM or in a reply
@ananjaser1211 for his Project Spaget, CronosKernel and HUGE contribution for Exy7870
@SPARTANICUS for KRAKEN Kernel
@SrCDA for his NFC patch
@erfanoabdi for his tools to port GSIs
And the rest of EliteTeam
DOWNLOADS ARE IN POST 2

DOWNLOADS:
Official Treble support Group : Telegram
----------------------------------------------------------------
All files are uploaded here: Google Drive
GSI: Here (My Google Drive acted up and does not let me upload any more files)

FAQ:
Good idea to read this F.A.Q While the rom is installing
Notes:
Q : Brightness bar not working / Camera doesn't work
A : You have flashed Spaget X instead of Spaget 3.0. Reinstall again
Q : Phone doesn't detect any SIM cards
A : Flash latest Cronos/KRAKEN kernel
Q : Everything on my screen is so small [J730 only]
A : Go to Settings > Developer settings > Set screen density to 411
Q : I got front camera stretch
A : Change resolution from 16:9 to 4:3
Q : Can I use front flashlight?
A : No, Samsung has their own libs, for now no apps can use front flashlight. Back flashlight still works
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : the phone wont install any apps
A : Reboot

One more

does the rom have some type of error for daily use

VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work

The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip

What android version is this? Can i flash the official magisk? There's no camera stretch bug? Like other gsi rom?

gabriel.oliveira.brito said:
The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
Click to expand...
Click to collapse
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
gabriel.oliveira.brito said:
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip
Click to expand...
Click to collapse
Thanks for noticing, I forgot to rename the file.

NindoS said:
VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
Click to expand...
Click to collapse
I don't use VoLTE, so I couldn't test if it works. Can you tell me which Magisk module you used?
NindoS said:
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work
Click to expand...
Click to collapse
Nice

Updated FAQ and sGSI patch. I forgot to add an important fix in patch, so anyone using this MIUI, reflash the new patch right now :good:

I tried again, followed all the steps as requested. On the first boot, I restarted the phone after approximately 30 seconds. But I still bootloop. I'm using Project Spaget 3.0, but I can't find a topic in the forum. Could you send me your Project Spaget zip file?
My logcat is on attachments

nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work

Working fine but having bug
I have a bug with the WhatsApp application when viewing the stories that contain videos are not played and the app freezes.
I attach my log Cat about the error

I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have

dani_hedz said:
I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have
Click to expand...
Click to collapse
It's sGSI related problem, don't know why it happens

argenmu09 said:
nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work
Click to expand...
Click to collapse
It works for me

Wi-Fi not working

[ROM][9.0][UNOFFICIAL] [G800H] LineageOS 16.0 [07-11-2020]

LineageOS 16.0 for S5 Mini G800H
DO NOT FLASH IT ON EXYNOS VARIANT G800F/M/Y OR YOU WILL BRICK YOUR DEVICE
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
Wifi
Sound
MTP
Video Playback
Fingerprint Sensor
Ril (Mobile data,calls, sms and stuff)
Sensors
Buttons and their backlight
SELinux
Bluetooth
Wifi HotSpot
Camera
GPS
Not Working:
you tell
Requirements:
- latest marshmallow firmware
- TWRP
- a rooted S5 Mini G800H
Downloads:
ROM: GDrive
Recovery: GDrive
Instructions:
-Flash the twrp zip from the downloads
-reboot to recovery
-wipe everything but microsd card
-install ROM
-optional, install opengapps nano or pico
Reboot!
Telegram Group : link
Credits and thanks:
LineageOS
Alastor89 and Thargorsson
Jackeagel
AlaskaLinuxUser
Samsung
anyone else I forgot
Changelog:
Code:
[B]07.11.2020[/B]
Fixed sensors, again
Fixed GPS
[B]27.10.2020[/B]
Fixed offline charging
Fixed earpiece
Fixed capacitive buttons
Switched CPU governor to interactive
Synced with latest lineage source
October security patch
Switched to official LOS MSM8226 kernel
Switched to official LOS MSM8226-COMMON device tree
Stability and performance improvements
[B]07.03.2020[/B]
Fixed Bluetooth FC
Fixed sepolicy permissions for sensors
[B]06.03.2020[/B]
Initial Alpha release
Source:
Code:
[url=https://github.com/LineageOS/android_kernel_samsung_msm8226]kernel[/url]
[url=https://github.com/LineageOS/android_device_samsung_msm8226-common]common[/url] [B]WIP[/B]
[url=https://github.com/S3NEO/android_device_samsung_kmini3g]device[/url] [B]WIP[/B]
[url=https://github.com/S3NEO/android_vendor_samsung_kmini3g]vendor[/url] [B]WIP[/B]
XDA:DevDB Information
LineageOS kmini3g, ROM for the Samsung Galaxy S5 Mini
Contributors
isbon, Alastor89, Thargorsson
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2020-03-06
Created 2020-03-05
Last Updated 2020-11-07

Reserved

Great work! :good:

Cool. A great day for the S5 MINI. Thank you. Is the fingerprint reader working? Are two SIM cards active?

it will bring my zombi G800H to life again. Great work

Hello
I proceed according to the description:
1. install the twrp from the download section (Go into your existing twrp> Install> Install image> select the recovery image> flash) - here I select the recovery partition
-wipe everything but microsd card
-install ROM - error pops up here:
E: unkown command
Updater process enden with ERROR: 7
Can I ask you for help in installation? How to install ?

tom1ko said:
Hello
I proceed according to the description:
1. install the twrp from the download section (Go into your existing twrp> Install> Install image> select the recovery image> flash) - here I select the recovery partition
-wipe everything but microsd card
-install ROM - error pops up here:
E: unkown command
Updater process enden with ERROR: 7
Can I ask you for help in installation? How to install ?
Click to expand...
Click to collapse
Try rebooting to twrp after flashing the recovery image.

OK, I have already installed, I confirm that there is support for two SIM cards and the fingerprint reader also works, thanks again for this rom, great work

Hello. You cannot hear the caller during a conversation. It actually helps to insert and pull out the mini jack cable - but you must repeat this for each new conversation. In contrast, the fingerprint reader works like a rocket - much better and faster operation than about stock rom

Hi! Just installed here, thanks for the ROM! Flashlight is working OK. Back and recente apps buttons work fine when I turn the device on, but after some time they stop working. Recent apps does not work at all and back button works as holding the recent apps open, dividing the screen. Also the battery icon shows as it is charging event after it stops charging. Everything works again after a reboot.

tom1ko said:
OK, I have already installed, I confirm that there is support for two SIM cards and the fingerprint reader also works, thanks again for this rom, great work
Click to expand...
Click to collapse
Hello, can you please share how did you solve mentioned error ? I have the same, thanks!

Hey. You have to, as he wrote "isbon" or "Try rebooting to twrp after flashing the recovery image" after restarting twpr after uploading recovery image once again you go to twpr and only upload rom

Hello there! Is The rom usuabble?
I think I will install the phone accordingly, if Rom will be improved regularly.
Is rom what time going to stable?
Thanks u very much

would it work on G800R4 US CELLULAR?

Are there screenshots of rom?

mistiko247 said:
Are there screenshots of rom?
Click to expand...
Click to collapse
I will upload a few later.

Soft is a masterpiece - it works beautifully on the phone, much faster than on the samung firmware. The phone is fully functional. Thank you very much to the creators. The phone got a second life - I sincerely recommend it to others.

when complete flash rom and After the logo for a few minutes back to recovery !!!! whey ?

have you done wipe everything but microsd card?

when flash rom is complete and after the logo for a few minutes returns to recovery ...
I don't know what's up, any idea?

[Unofficial] [Stock-based] Lineage 15.1 for Xperia X Performance [EOL]

Lineage 15.1 for Xperia X Performance [Stock based]
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.x (Pie),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : http://lineageos.org
About LineageOS Legal : http://lineageos.org/legal/
Important Information
1. This ROM has nothing related to ODM images! So you don't need to ask/install anything like that, just follow the instructions.
2. This ROM will never work with any versions of Google Camera (GCam)!
3. You need to flash Stock 41.3.A.2.149 before flashing this ROM.[
4. This ROM is suitable for dual and single model
5.VoLTE is supported, but you need to enable it on stock firmware at first./COLOR]
Downloads Links
LineageOS 15.1:
Unofficial: https://www.androidfilehost.com/?w=files&flid=307067
A special twrp recovery for this ROM:
https://www.androidfilehost.com/?fid=8889791610682924454
Google Applications (optional):
OpenGapps: http://opengapps.org/ (ARM64->Android 9.0->Pico, Nano or Micro)
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
LineageOS clean install:
Download the latest build of LineageOS ROM
Full wipe and factory reset (recommended / backup to make sure not to loose data)
Flash the LineageOS ROM zip from the Recovery
Flash the GApps to have the Google Applications (optional)
Every additional zip you want to flash (optional)
Reboot
LineageOS update/upgrade:
Download the latest build of LineageOS ROM
Wipe cache and dalvik cache
Flash the latest LineageOS ROM zip from the Recovery
Every additional zip you want to flash (optional)
Reboot
LineageOS addonsu for root access:
Download the addonsu for arm64: LineageOS Downloads / Extras
Flash the zip on a working Lineage installation (once)
Upon ROM updates, the addonsu is preserved
Reboot
About the builds:
Source: https://github.com/sony-msm8996
Issues and reports
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Share a log of the error with CatLog for example
Also thanks to:
The LineageOS Team
The CyanogenMod Team
The SODP Team.
Chippa_a
Everyone involved in working and testing
Contributors
Sjll, Olivier
ROM OS Version: 8.1
ROM Kernel: Linux 3.18.x
Version Information
Status: Stable

FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Ok
- Camera: Ok
- Camcorder: Ok
- Lights: Ok
- MicroSD: Ok
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- DRM: No test
- Offline Charging: No
- USB: Ok
- USB Tethering: Ok
- USB OTG: Ok
- Encryption: No
- SEPolicies: Permissive

Result
I tested the project you didn't test and I can test it once. Now I know that GPs and microSD are working
And I hope you will continue to optimize lineages OS based on sodp

LeafNic said:
I tested the project you didn't test and I can test it once. Now I know that GPs and microSD are working
And I hope you will continue to optimize lineages OS based on sodp
Click to expand...
Click to collapse
Thanks for feedback.

New version uploaded, it is stable now.

will you make los 17.1 for it?. your build make my device cool not like treble, i can cook eggs on it

um....btw , he is the one who maintain project treble on dora
correct me if i'm wrong

Thestardr said:
will you make los 17.1 for it?. your build make my device cool not like treble, i can cook eggs on it
Click to expand...
Click to collapse
LOL
amnesia1408 said:
um....btw , he is the one who maintain project treble on dora
correct me if i'm wrong
Click to expand...
Click to collapse
Yup.

Is there a guide to isntall this? I got the bootloader unlocked using the key generet with the IMEI from the sony website, but when I tried "fastboot boot recovery.img", the phone just booted up normally.
I then tried flashing the recovery.img, this was reported as succesful, but the phone still booted normally whenever i did "adb reboot recovery".
Right now I got it back to stock, with bootlaoder locked and 41.3.A.2.149 NOBA installed.

try to boot to recovery manually
turn off your phone
hold power+volume down to turn on your phone
it take time to enter recovery mode so be patient

amnesia1408 said:
try to boot to recovery manually
turn off your phone
hold power+volume down to turn on your phone
it take time to enter recovery mode so be patient
Click to expand...
Click to collapse
I tried that now. I can see the "Sony" logo on the screen for around 5 seconds, but then a very brief red flash and the phone reboots. This behavior repeats itself while holding power and volume down.
If I release any of the two buttons during the "Sony" logo, the phone boots the system normally.

you can try out recovery at the project treble pie thread , i think the fstab file is still same with this recovery , well i dont think it worth to try , it consume your time to reinstall the stock if it fail when installing the rom
good luck if you want to try that

MartinFierce said:
Is there a guide to isntall this? I got the bootloader unlocked using the key generet with the IMEI from the sony website, but when I tried "fastboot boot recovery.img", the phone just booted up normally.
I then tried flashing the recovery.img, this was reported as succesful, but the phone still booted normally whenever i did "adb reboot recovery".
Right now I got it back to stock, with bootlaoder locked and 41.3.A.2.149 NOBA installed.
Click to expand...
Click to collapse
some version of twrp dont work with this phone so it will boot to system instead of twrp, it dont care how many times you have tried. try using sjii twrp-Q, its support many roms

Hi, thanks for the continued development!
Can I flash this rom over the one based on SODP?

leandrox said:
Hi, thanks for the continued development!
Can I flash this rom over the one based on SODP?
Click to expand...
Click to collapse
you should flash 41.3.a.2.149 first and then install for original performance
edit: but why. sodp support gcam and more hyper performance

can someone give me a link download firmware 41.3.a.2.149 pls

Thestardr said:
you should flash 41.3.a.2.149 first and then install for original performance
edit: but why. sodp support gcam and more hyper performance
Click to expand...
Click to collapse
Thanks, yes, I will stay on the SODP based ROM.

SikeClaus said:
can someone give me a link download firmware 41.3.a.2.149 pls
Click to expand...
Click to collapse
you can download it on xperiasite.pl here
say no to xperifirm, xperifirm dont have imei after flash (aka imei error, this mean no sim card will work and *06# will crash. i face this)

Thestardr said:
you can download it on xperiasite.pl here
say no to xperifirm, xperifirm dont have imei after flash (aka imei error, this mean no sim card will work and *06# will crash. i face this)
Click to expand...
Click to collapse
Xperifirm always worked fine for me

Thestardr said:
say no to xperifirm, xperifirm dont have imei after flash (aka imei error, this mean no sim card will work and *06# will crash. i face this)
Click to expand...
Click to collapse
Fine here , you should choose the correct region

Develop Bugs

welcome