Develop Bugs

PDair Ultra Clear Screen Protector Review [PHOTOS]

Today i got my PDair ultra clear screen protector.
I got it because i needed a screen protector and i didn't find the spigen flex HD on amazon until a day after i placed my order, so i got this.
It comes in a small plastic bag, nothing fancy, inside you get ONE protector (i thought there would be at least 2 but i was wrong), a cleaning cloth, a "soft card" aka piece of plastic to squeeze out air bubbles and the obligatory instructions demonstrating how to apply on the iphone (the front "selling" image is also of an iphone).
It's a dry application protector with two layers to peel off.
I should warn you so you don't make my mistake, the protector, once you remove the "step one" protective layer is EXTREMELY electrostatic. It picked up dust from the surrounding table like there was no tomorrow. So now i've got a bit of dust under my protector, but it's nothing serious, though it may bother some people.
It applies very nicely, this is my first screen protector ever and i managed to get it on the first time with no bubbles in the middle.
The sides and edges have some bubbles but i think thats just from the dust, or i didn't apply it correctly.
The protector itself is invisible, except for the edges of the plastic, and it's a bit harder to swipe now it's on, like it's a bit sticky.
Maybe that will wear off over time, will update this post if it does. It still collects fingerprints and smudges, but it's just a little bit better than without the protector.
It offers good protection, and fingernails do not leave a mark, neither does rubbing metal on it, though very sharp objects do leave a mark. (see last picture, i tested it with the sharp end of a screwdriver and pushed quite hard. It does scratch but the screen beneath is OK)
One more thing , it does not cover the whole screen, on the top and bottom there is about 3mm of glass to the edge, and on the sides it goes to the curved part. I use the case mate tough case so it does not bother me.
And thats it, pics below, any questions ask me and i will try to answer.
PICS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Skinomi Tech Glass first impressions/mini review

Hello everyone. I just got the chance to install the Skinomi Tech Glass tempered glass screen protector that I ordered off of Amazon a couple days ago for $14.95 after I noticed that my Nillkin chipped in a couple of spots on top of the screen protector and proceeded to crack.
The overall packaging of the Skinomi is done rather well and unless heavy items is stacked on the packaging the screen protector should be safe during transport. I chose the Skinomi product over other products because of a lifetime replacement warranty they have on the product so if this screen protector happens to chip or lift up because of a poor manufacturing process I have that extra piece of mind. Some features this product has is as mentioned before a lifetime warranty, a thin profile(seems thinner than Nillkin although the official specs has it the same), rounded edges, oleophobic coating, and a proximity sensor cutout. Installation was a breeze and the fit is much like the Nillkin with a couple of millimeters of space around the edges. So far I am quite satisfied with the product, I will upload pictures of the installation soon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Does is come with a back protector as well? I noticed my Nillkin has small chips at a few spots as well. One of them looks like it's cracked slightly but it's so thin you don't notice it. I'm thinking it'll blow out eventually though so I'll have to replace sooner or later. Damned if I know how how it would have chipped since I've never dropped it or keep it near anything that could do it.
The cheap back protector that comes with the Nillkin seems to be doing the job, it's scratched to hell! So I'll never not have anything on the back.

No the Skinomi does not come with a back protector, just the front. I still have my Nillkin back cover still on the phone.
I am assuming the keys in my pocket caused the chips on my Nillkin because I never dropped my phone either.

Forgive me if this sounds stupid, is this meant to be use in place of the stock glass that comes on the Z1?

Nith2 said:
Forgive me if this sounds stupid, is this meant to be use in place of the stock glass that comes on the Z1?
Click to expand...
Click to collapse
no. it covers the glass, so you technically have 2 layers of glass on the front of your phone.

Screen Protectors!

Hi guys,
Can you recommend good quality screen protector? Any good brand?

I looked but I don't think I want one. I'm a fan of glass and I don't see that happening for the watch.

I got a set of 6 EZGuardz screen protectors on EBay for less than $3. It fits right to the edge of the glass perfectly and is 100% invisible. I can feel a slight difference when swiping. It's just a tiny bit less slippery feeling. But the peace of mind knowing that I'm not gonna accidentally scratch the screen is well worth it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

BlastTyrantKM said:
I got a set of 6 EZGuardz screen protectors on EBay for less than $3. It fits right to the edge of the glass perfectly and is 100% invisible. I can feel a slight difference when swiping. It's just a tiny bit less slippery feeling. But the peace of mind knowing that I'm not gonna accidentally scratch the screen is well worth it.
Click to expand...
Click to collapse
I bought a set as well

I bought some Skinomi MatteSkin protectors that fit well enough, but I thought they made the screen look too fuzzy. I usually like matte finish anti-glare screen protectors, but I didn't like these particular ones on this watch. I'm going naked for now.

I ordered a set of two from XtremeGuard's website. They have a promotion going on where you can get 91% off using the promo code Christmas91 and purchasing three items. Should get it in the next few days. Will report back.

I bought the Skinomi TechSkins (the kind that you have to spray before applying) and I am happy with it. It has a lifetime guarantee (or so they say) but I have 6 of em so I doubt I'll ever need to take them up on that. It had a few bubbles for the first day or two but those started to face and now it isn't even noticeable. I can feel a slight change in the ability to slide my finger on it, but i'm comfortable with it.

Received my XtremeGuard protector (ordered 2, but only received one). Applied just like their other protectors, which was very easy. Looks good and no issues whatsoever. Not bad for the price either considering it was 91% off.

CSX321 said:
I bought some Skinomi MatteSkin protectors that fit well enough, but I thought they made the screen look too fuzzy. I usually like matte finish anti-glare screen protectors, but I didn't like these particular ones on this watch. I'm going naked for now.
Click to expand...
Click to collapse
recommend me some good skin protector those i can use for my watch.

Best OnePlus 7 Tempered glass screen protectors

I'm about to buy the OnePlus 7 and I want to get a good Tempered glass screen protector for this smartphone.
For my several older smartphones I didn't have such a good experience with screen protectors in general.
Are you going to get OnePlus 7? What Tempered glass screen protector are you planning to use?
For now I might get this one:
MOD EDIT: LINK REMOVED
Posting affiliate links is not allowed on XDA.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'll be watching for an Ultimate Shield 3D protector, they're usually reasonably priced but good quality.

yokodev said:
I'm about to buy the OnePlus 7 and I want to get a good Tempered glass screen protector for this smartphone.
For my several older smartphones I didn't have such a good experience with screen protectors in general.
Are you going to get OnePlus 7? What Tempered glass screen protector are you planning to use?
Click to expand...
Click to collapse
I always use rhinoshield. The preinstalled plastic protector will be sufficient until rhinoshield starts producing theirs. OnePlus tempered glass is garbage and cracks in your pocket under normal circumstances. I have a front and rear impact protection on my OnePlus 6 and the screen and back are still in perfect condition.

djsubterrain said:
I'll be watching for an Ultimate Shield 3D protector, they're usually reasonably priced but good quality.
Click to expand...
Click to collapse
I like what Ultimate Shiled has to offer and went with them even though they're in the UK and I'm in the US.

I ordered the TGSP/Nylon Case bundle with my OP7 and finally got round to installing it today. As per normal, it's not an easy process to remove the protector from its backing and work out all the bubbles but now it is done I have to say that it is a good fit and once the fingerprint sensor was retrained works very well.
I used the included clear case to aid alignment and now that it is on I only have a very slight bit of lift at the top left corner which is only visible with the screen off or dark. I can live with that. Doesn't seem to clip the screen noticeably either.
As you would expect, it is fully compatible with the Oneplus cases. It is also perfect with the Spigen Liquid Air.
In short, expensive but a good fit.
**Update: A couple of gentle strokes after a couple of hours an the one bit of lift is now gone. Result.

Review case and tempered glass from Nillkin

Today i received case and tempered glass from Nillkin. First i need to say that i always have good experience with they tg. When i install tg i turn off phone. But my advice is that you install tg when you have screen turn on. You will get better perception where to install tg. Tg is perfect size to cover screen. Case friendly. And you get all for installation. In package you get some tipe of tg for back camera.
Link for glass: https://nillkin.org/smartphones-acc...es/nillkin-samsung-galaxy-s10e-s10-lite-h-pro
Twinkle case that i get is soft case. Case is made from 5 different materials. The frame is environmentally friendly and flexible TPU, PC back shell. Combination of hardness and softness. Easy to apply and take off. Affixed with high-grade PU leather and blended with reflective glass particles. The surface is woven polyester mesh. Reflective glass particles process makes it twinkling under different light. Case have some rainbow effect on back side that looks cool when you are outside. Case is slim, very good in hand with ok grip. Buttons work perfect, cutouts are where they should be.
Link for case: https://nillkin.org/smartphones-acc.../nillkin-samsung-galaxy-s10e-s10-lite-twinkle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nice! I'm looking for a screen protector that works with a Speck case and this might fit the bill.
Based on my S7 experience, the lip of the Speck case can cause issues for screen protectors that cover too much of the face.
EDIT: It's cheaper off Aliexpress vs Nillkin storefront

That screen protector looks much smaller than the device screen.

Krikoo said:
That screen protector looks much smaller than the device screen.
Click to expand...
Click to collapse
Yes, It covers only the visible screen part. The bottom"lip" part stays uncovered.

Can you post a photo with the phone's screen on? That'll help us see the coverage better. Thanks!