Develop Bugs

GT-N7100 Android 4.1.2 problem

Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.

Try reading through Dr Kevin's threads again, just to be sure. Re-download the rom you want, from a different source and double check the MD5. Doesn't sound permanent, just a bad flash. Make sure you wipe everything again.

Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there

Dean_M said:
Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there
Click to expand...
Click to collapse
There's a link it here... http://androidromupdate.com/2013/04...much-smoother-android-4-1-2-jelly-bean-build/
Might the same as the Sammobile but if the MD5 checks out, it should be fine.
Sent from my GT-N7100 using XDA Premium 4 mobile app

I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware

Dean_M said:
I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware
Click to expand...
Click to collapse
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.

AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?

Dean_M said:
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?
Click to expand...
Click to collapse
The one file has all the other files like modem,csc in it.. This kind of error usually happens if the data is not wiped out. But as you said you have already done that several times, I don't know what might be the problem..
As you said that you are having unlocked N7100, I hope you downloaded this file http://www.hotfile.com/dl/229498497/9ffa6b9/N7100XXDME6_N7100OXXDME2_BTU.zip.html

Yes thats what i thought that all files were included in the one yes that is the exact one i have on it now i also tried it from different sources just typed *#1234# into the dialler what i have is ap: N7100XXDME6 CP:N7100XXDME4 CSC:N7100XXDME2 ? I appreciate the Help

AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
Dean_M said:
Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.

jdomadia said:
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
Click to expand...
Click to collapse
Screenshots of both logs

Dean_M said:
Screenshots of both logs
Click to expand...
Click to collapse
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.

jdomadia said:
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.
Click to expand...
Click to collapse
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?

Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
Usually the product code is set when you Factory reset your phone in Recovery mode.. In your case it has not changed.
I checked in the Sammobile for Ireland based roms. But all seems to be carrier branded. So BTU rom should ideally work as it contains EIR CSC

Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762

jdomadia said:
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762
Click to expand...
Click to collapse
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen

Dean_M said:
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen
Click to expand...
Click to collapse
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck

jdomadia said:
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck
Click to expand...
Click to collapse
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction

Dean_M said:
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction
Click to expand...
Click to collapse
Yes Sure someone more knowledgeable can help,you can PM your problem to Dr.Ketan (Search in this forum) he is rely genius.

Look my signature for N7100 toolbox, find PIT and download it
extract to .pit
Flash that PIT for PIT tab of odin (selecting pit will auto select re partition optiuon, keep it selected)
Again repeat but this time along with ROM file (single file ROM also enough). Rom file for PDA and pit file for PIT
Flash and report back.

[Q] Generic IMEI after OTA 4.3 upgrade

Hello to everyone, I was wondering if anyone can help with this. I have a Galaxy Note 2 branded by an Italian company (3hg Italia). It recently received its update to Android 4.3 (update N7100XXUEML2). It was the official update OTA, the phone is not rooted and it had the stock ROM on it. The update somehow messed up my IMEI making it appear as the generic 0049 forcing me on "Emergency calls only" mode. I already tried flashing the same ROM with Odin and repeating the update with KIES, but while the updates always results successful the IMEI remains 0049. I never made a backup of the EFS folder for this phone since I haven't rooted it or flashed any different ROM on it yet. There is any chance that the phone made an automatic backup? I live in the States right now and Samsung tells me I need to ship it back to Italy to have it fixed, but that costs a lot and would take forever, and I would much prefer try to solve the problem locally. Any suggestions would be greatly appreciated, if not for any fix that I can try myself, at least some place on the West Coast that can fix the problem!
Thank you!
Lorenzo

Oh I forgot to add that because of Hardware problems I recently sent my phone to Samsung and they replaced the motherboard, which fixed the problem I was having. I don't know if that could be related!

rext said:
Oh I forgot to add that because of Hardware problems I recently sent my phone to Samsung and they replaced the motherboard, which fixed the problem I was having. I don't know if that could be related!
Click to expand...
Click to collapse
Here's solution : http://forum.xda-developers.com/showthread.php?t=2539731

phluid01 said:
Here's solution : http://forum.xda-developers.com/showthread.php?t=2539731
Click to expand...
Click to collapse
I'm afraid that fix works just if you have your actual IMEI, I instead have the generic IMEI that starts with 0049. But I will check it out! Thanks!

rext said:
I'm afraid that fix works just if you have your actual IMEI, I instead have the generic IMEI that starts with 0049. But I will check it out! Thanks!
Click to expand...
Click to collapse
Then you should simply flash another modem from here : http://forum.xda-developers.com/showthread.php?t=2044937 ... flash a custom recovery first.

phluid01 said:
Then you should simply flash another modem from here : http://forum.xda-developers.com/showthread.php?t=2044937 ... flash a custom recovery first.
Click to expand...
Click to collapse
Thank you so much! I'll take a look into it tomorrow and try it!

rext said:
Thank you so much! I'll take a look into it tomorrow and try it!
Click to expand...
Click to collapse
So I found someone nice enough to give me a hand with this situation, but still no luck yet! Here what they say:
At first glance, the EFS data on the phone was corrupt. I re-generated
that data and restored it to the phone without success.
The GSM radio itself is operational, and the firmware for it is
installed and functional. diagnostic data flows to the towers and back
to the phone but it's not reading the IMEI from the copy of
nv_data.bin contained within EFS. I've re-generated and installed
those files as well, again with no luck.
I rolled the device back to it's original factory firmware and radio
baseband, then ran through the update for the radio baseband, which
also regenerates the contents of EFS, and still no luck.
Given the situation, anyone have other suggestions?

can someone please help me?

this may be the dumbest thing i have ever done. and i feel stupid.
so i saw that 8.0.0 was released for the A5 BTU.
i assume mine was BTU because it was unbranded and I bought my phone from Carphone.
i install the firmware, only to know that i have no service. and in settings it shows up a wierd carrier that i cannot access.
so i plug it into smart switch on my pc, and it shows up as XER instead of BTU.
im so confused, can someone please help me? i feel really dumb
(i have left a screenshot of wierd carrier)
my imei and baseband also show up as unknown

YoMarshMellow said:
this may be the dumbest thing i have ever done. and i feel stupid.
so i saw that 8.0.0 was released for the A5 BTU.
i assume mine was BTU because it was unbranded and I bought my phone from Carphone.
i install the firmware, only to know that i have no service. and in settings it shows up a wierd carrier that i cannot access.
so i plug it into smart switch on my pc, and it shows up as XER instead of BTU.
im so confused, can someone please help me? i feel really dumb
(i have left a screenshot of wierd carrier)
my imei and baseband also show up as unknown
Click to expand...
Click to collapse
Same problem here with weird settings app...(A320FL)

Pagan_Serpent said:
Same problem here with weird settings app...(A320FL)
Click to expand...
Click to collapse
in trying to go back to nougat, do you also have the t roaming thing?

YoMarshMellow said:
in trying to go back to nougat, do you also have the t roaming thing?
Click to expand...
Click to collapse
Yes..

I found a fix, reflash the Oreo image but make use of each file in the compressed zip. So the bl file goes to the bl section, ap file goes into ap, cp into cp, csc into csc...
U will lose all ur data though so be careful
I feel like a retard not knowing this lol

YoMarshMellow said:
I found a fix, reflash the Oreo image but make use of each file in the compressed zip. So the bl file goes to the bl section, ap file goes into ap, csc into csc etc...
U will lose all ur data though so be careful
I feel like a retard not knowing this lol
Click to expand...
Click to collapse
So the CSC is the problem 'cause when I flashed Oreo, I used AP, BL and CP but no CSC...

Pagan_Serpent said:
So the CSC is the problem 'cause when I flashed Oreo, I used AP, BL and CP but no CSC...
Click to expand...
Click to collapse
Yes, my problem is a bit different as i only flashed ap so i had no service functionality but after i had reflashed, the phone erased itself and i was back on oreo with the proper settings app and with the ability to make calls and send text messages.
I think it would help to use odin 3.13/3.13.1.

YoMarshMellow said:
this may be the dumbest thing i have ever done. and i feel stupid.
so i saw that 8.0.0 was released for the A5 BTU.
i assume mine was BTU because it was unbranded and I bought my phone from Carphone.
i install the firmware, only to know that i have no service. and in settings it shows up a wierd carrier that i cannot access.
so i plug it into smart switch on my pc, and it shows up as XER instead of BTU.
im so confused, can someone please help me? i feel really dumb
(i have left a screenshot of wierd carrier)
my imei and baseband also show up as unknown
Click to expand...
Click to collapse
Hey, flash modem.bin file from old stock rom and you are good to go ! Had this issue with my S4 .

Question Baseband Version UNKNOWN

Tried everything. Searched through the webs for past couple of days. Everything failed.
Majority of articles are from times of Ancient Rome. None work and are outdated.
Reflashed stock with nand erase and pit file. Checked and failed.
Tried root related solutions? Checked and failed.
Searched modem file. Failed.
Downgrade to prev version? No longer plausible. Due to BIT.
I flashed and reflashed with odin numerious of times. Nothing. Useless. Absolutely useless.

did u solve it?

Did you guys find anything? I think I'm gonna go check at a repair shop for someone with the z3x box and hope for the best.

Mighty_Rearranger said:
Did you guys find anything? I think I'm gonna go check at a repair shop for someone with the z3x box and hope for the best.
Click to expand...
Click to collapse
any luck?

dronkit said:
any luck?
Click to expand...
Click to collapse
Nope, he said no matter what rom he flashed it was always unknown IMEI.
However I found something interesting, turns out my IMEI and baseband numbers are intact when I check them from recovery. Maybe downgrading this phone should fix that, although I'm not sure if it is possible.

Mighty_Rearranger said:
Nope, he said no matter what rom he flashed it was always unknown IMEI.
However I found something interesting, turns out my IMEI and baseband numbers are intact when I check them from recovery. Maybe downgrading this phone should fix that, although I'm not sure if it is possible.
Click to expand...
Click to collapse
no, its not possible because of the bit.... can you try using an old modem to see if it solves the problem?

applesucksLmao said:
no, its not possible because of the bit.... can you try using an old modem to see if it solves the problem?
Click to expand...
Click to collapse
You mean like flashing an older modem? How can I do that?

Mighty_Rearranger said:
You mean like flashing an older modem? How can I do that?
Click to expand...
Click to collapse
its the CP file in odin

try flashing one from may or august.. don't try november or newer

You need to download an older firmware (older than november, never try that ****ty november update!) of your country's a32 and use just the cp file

applesucksLmao said:
You need to download an older firmware (older than november, never try that ****ty november update!) of your country's a32 and use just the cp file
Click to expand...
Click to collapse
I'll get an older firmware from sammobile and get back to you if anything different happens. Just as a note, someone here on XDA said they were able to downgrade when using a Magisk altered ROM.
Edit: I found something similar on another samsung phone here on XDA: thread here.

Mighty_Rearranger said:
I'll get an older firmware from sammobile and get back to you if anything different happens. Just as a note, someone here on XDA said they were able to downgrade when using a Magisk altered ROM.
Edit: I found something similar on another samsung phone here on XDA: thread here.
Click to expand...
Click to collapse
Could you flash it with a magisk modified rom?

@Mighty_Rearranger maybe you could try flashing an android 12 gsi? https://forum.xda-developers.com/t/...sing-odin-without-twrp-phh-lineageos.4114435/ I don't have the phone with me right now so I can't test it

applesucksLmao said:
You need to download an older firmware (older than november, never try that ****ty november update!) of your country's a32 and use just the cp file
Click to expand...
Click to collapse
OK I tried doing that and now phone is bootlooping with secure check fail md1img error, that's the anti-downgrade thing complaining. No luck down the downgrade hallway.
I think the only option is to wait for a possible solution from the Magisk people or check if a future update somehow fixes the problem.

Mighty_Rearranger said:
Nope, he said no matter what rom he flashed it was always unknown IMEI.
However I found something interesting, turns out my IMEI and baseband numbers are intact when I check them from recovery. Maybe downgrading this phone should fix that, although I'm not sure if it is possible.
Click to expand...
Click to collapse
how do you check them from recovery? I was able to see them once after a botched flashing, entering download mode, there was a "show barcode" option or something like that.
I have read in an older thread in this forum, some guy solved it by downgrading, but to a version which is impossible to downgrade to for us, because our phones already came with the AUJ4 firm, and acannot go back.

applesucksLmao said:
@Mighty_Rearranger maybe you could try flashing an android 12 gsi? https://forum.xda-developers.com/t/...sing-odin-without-twrp-phh-lineageos.4114435/ I don't have the phone with me right now so I can't test it
Click to expand...
Click to collapse
what's the idea? there aren't any custom roms, are there?
or you mean this way it could be possible to downgrade?

dronkit said:
what's the idea? there aren't any custom roms, are there?
or you mean this way it could be possible to downgrade?
Click to expand...
Click to collapse
if someone manages to create twrp for a32 4g maybe there's a way back

applesucksLmao said:
if someone manages to create twrp for a32 4g maybe there's a way back
Click to expand...
Click to collapse
TWRP lets you bypass the binary version check?

Mighty_Rearranger said:
TWRP lets you bypass the binary version check?
Click to expand...
Click to collapse
i don't know probably, and we could get a backup from someone with a not fricked phone and edit it to our imeis

Question [fixed] rooted a325m suddenly no imei, no sim

I rooted my a325m by patching the stock AP file with magisk, had to use FRP hijacker by hagard to be able to flash the patched file. I root uninstalled several apps for debloating. The phone worked fine for like a couple of weeks, and now, suddenly I find there's the no SIM indication, and in settings -> about phone it says IMEI: unknown, and in software information it says bandbase version: unknown.
The firmware version I used was exactly the same as when I bought it, A325MUBU2AUJ4, with the right csc (ARO in my case).
EDIT: after a couple reboots, the bandbase version now shows, but still no IMEI or SIM detected.
Can anyone help me? What happened? What can I do? Thanks in advance!

flash all the with odin the correct rom. the twrp unstable and more like shell and who knows what bugs have magisk. until why have a good recovery i would no root my phone reallly if you want to unisstall the software from samsung and google i would say to use the universal debload https://github.com/0x192/universal-android-debloater.

UPDATE: it got unknown baseband againI
I relocked the bootloader and now in download mode I have an option to "show barcodes" pressing the side button. The barcodes show the right IMEI and serial number. Maybe stuff wasn't erased, just inaccesible by the rom?
I was told by a technician to flash the original ROM (already did) then root again. Tried several versions but not an older bandbase because downgrade is forbidden by the bootloader, apparently, to no avail. Would try a newer baseband but i'm afraid it will not work and will be unable to go back to the origial baseband version.
Weird thing is, there is the EFS directory but no /data/nvram or /dev/nvram

Same happened to me.
I tried everything I could think of to get the IMEI back and couldn't.
It was still under warranty and I took it to Samsung.
Before taking it I unrooted it and locked it again.
They fixed it for me with no problem.

edukardo said:
Same happened to me.
I tried everything I could think of to get the IMEI back and couldn't.
It was still under warranty and I took it to Samsung.
Before taking it I unrooted it and locked it again.
They fixed it for me with no problem.
Click to expand...
Click to collapse
How did you root it?
as I understand, after rooting, warranty is void since it implies flashing a magisk patched boot image or AP tar. In my case I was indeed able to relock the bootloader and flash the original firmware but upon entering download mode, it shows "warranty void 0x01".
was it the same in your case?

Flashed original firmware, relocked phone, and then went to Samsung Office. I had no problem with it

edukardo said:
Flashed original firmware, relocked phone, and then went to Samsung Office. I had no problem with it
Click to expand...
Click to collapse
most likely the warranty vod bit was on (you can check it yoursef by entering odin mode) and they didn't notice
so you got it fixed for free?
did they mention what did the fix consist in? I heard they say they change the motherboard, which is a lie, they just write the nvram or efs with the right stuff
ah sos de argentina? lol where did you take it? to a samsung store? I'm from neuquen and got it at musimundo, but here's a samgung store too

myself i was thinking of waiting for an update which should be soon, lock bootloader, flash some official rom and pull off the cable so it gives an upgrade error and doesn't enter download mode, then take it to the store

Unroot before update and unlock

wipe the cache partition . then reset the phone using recovery mode . this is at you own risk .

did you fix it?

applesucksLmao said:
did you fix it?
Click to expand...
Click to collapse
nope, went to samsung, got rejected cause warranty bit on, no choice but take it to a service and I suppose they could do something with Chimera Tool, Z3X or something like that, which, as I've seen, claims to fix it in minutes (and the client gets charged handsomely, like 100 USD)
From Samsung I got the same bullsh*t I read in some threads: "this phone has been tampered with and it's a hardware problem, the board must be replaced"

For the technically savvy, I got a strange Magisk log which kind of looks like it may be the problem. It seems to try to "unlock"* some devices on bootup but gets "permission denied". One of them may be the nvram or something like that. I have an EFS directory but no NVRAM directory anywhere or /dev/nvram.

very strange, i guess we gotta not use magisk until its bug fixed.. i have seen other people have the same problem too, but anyways, i sent my phone to get probably JTagged for 54 us dollars, if they fix it well, great right, but if they dont i guess ill have to buy another motherboard from samsung or go to another city... and the best part is that while my phone is there, im using an S4 mini from 2013 with custom android 11 rom hehe

i saw that auh firmware causes empty imei in another thread and to flash aug, maybe you could try this? https://forum.xda-developers.com/t/has-anyone-successfully-rooted-this-a32-4g.4326193/post-85788523

applesucksLmao said:
very strange, i guess we gotta not use magisk until its bug fixed.. i have seen other people have the same problem too, but anyways, i sent my phone to get probably JTagged for 54 us dollars, if they fix it well, great right, but if they dont i guess ill have to buy another motherboard from samsung or go to another city... and the best part is that while my phone is there, im using an S4 mini from 2013 with custom android 11 rom hehe
Click to expand...
Click to collapse
or atleast use magisk with aug or even older firmware if you can... is your a32 A325M or A325F?

well, your firmware is A325MUB"U2"AUJ4 and that means u cant downgrade to older versions that have binary1 so maybe you could try using samsung's new version which was released past month

applesucksLmao said:
very strange, i guess we gotta not use magisk until its bug fixed.. i have seen other people have the same problem too, but anyways, i sent my phone to get probably JTagged for 54 us dollars, if they fix it well, great right, but if they dont i guess ill have to buy another motherboard from samsung or go to another city... and the best part is that while my phone is there, im using an S4 mini from 2013 with custom android 11 rom hehe
Click to expand...
Click to collapse
what's JTagged?

applesucksLmao said:
i saw that auh firmware causes empty imei in another thread and to flash aug, maybe you could try this? https://forum.xda-developers.com/t/has-anyone-successfully-rooted-this-a32-4g.4326193/post-85788523
Click to expand...
Click to collapse
I found it impossible to downgrade, download mode doesn't allow it. Couldn't find a tutorial to do it either.

applesucksLmao said:
well, your firmware is A325MUB"U2"AUJ4 and that means u cant downgrade to older versions that have binary1 so maybe you could try using samsung's new version which was released past month
Click to expand...
Click to collapse
I did, I tried all combinations rooting/unrooting with the new magisk 24.1 the new version, A325MUBS2AVA1
It's a 325m btw