Develop Bugs

HTC ONE E9 + ROOt

Hi,
I bought this phone some mounts ago and I had some problems with one of the preinstalled apps . I'd like to root the phone the only problem is that I m a nooby and don t quite know how to do it , can someone give me some info or instructions on how to do it .
And can u tell me what is the difference between A55ML and e9pw(A53ML).
Thx

TheDarkOne1 said:
Hi,
I bought this phone some mounts ago and I had some problems with one of the preinstalled apps . I'd like to root the phone the only problem is that I m a nooby and don t quite know how to do it , can someone give me some info or instructions on how to do it .
And can u tell me what is the difference between A55ML and e9pw(A53ML).
Thx
Click to expand...
Click to collapse
Hi Brother
There Are 2 Methods To Root Your Phone
First
1 Unlock Your Bootloader (You Should Go To HtcDev.Com And Follow Their Steps)
2 Flash TWRP RECOVERY With ADB
3 And Then Flash SuperSU.Zip
The Second Method
1 Download KingRoot App
2 Open It And Hit Root!
But My Choice Is Method 1
Cause Then U Can Make Nandroid Backup And Etc.
Then,A55 Is HTC One E9+
But, A53 Is HTC One E9
If You Have Any Question, I'm Glad To Help You!

There's another option - go to HTCdev to unlock your bootloader, It's a simple procedure, then find a TWRP for your device (mine is A55ML), and go to Magisk thread. Flash Magisk as per instructions - it has it's own built-in root and init.d simulator. The best part is that Magisk will let you run everything in systemless mode - with Magisk you'll have root, xposed, busybox, and various other modules. All of them without touching the system partition. It's very easy to unroot if you decide to do so for some reason. I even got to install Viper Audio. Also there's module that enables writing on external sd card. Since i got Magisk i got to modify a lot of things with systemless xposed. Good luck!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

vanshee said:
There's another option - go to HTCdev to unlock your bootloader, It's a simple procedure, then find a TWRP for your device (mine is A55ML), and go to Magisk thread. Flash Magisk as per instructions - it has it's own built-in root and init.d simulator. The best part is that Magisk will let you run everything in systemless mode - with Magisk you'll have root, xposed, busybox, and various other modules. All of them without touching the system partition. It's very easy to unroot if you decide to do so for some reason. I even got to install Viper Audio. Also there's module that enables writing on external sd card. Since i got Magisk i got to modify a lot of things with systemless xposed. Good luck!
Click to expand...
Click to collapse
But With Magisk There Is No Way To Use Lucky Patcher!
It Runs Like For A Non-Rooted Device

Mohammad_pd said:
But With Magisk There Is No Way To Use Lucky Patcher!
It Runs Like For A Non-Rooted Device
Click to expand...
Click to collapse
true, but i never had the need to use lucky patcher anyway. I'm sure there's other options. With the lack of a custom rom for this phone, Magisk is the closest you can get in modding your device without brick it. I mean, most of the stuff is systemless so less chance to brick it. With all the xposed goodness only option i miss in MM is a doze. Currently i have 27 xposed modules.

vanshee said:
true, but i never had the need to use lucky patcher anyway. I'm sure there's other options. With the lack of a custom rom for this phone, Magisk is the closest you can get in modding your device without brick it. I mean, most of the stuff is systemless so less chance to brick it. With all the xposed goodness only option i miss in MM is a doze. Currently i have 27 xposed modules.
Click to expand...
Click to collapse
Lucky Patcher To Patch Poweramp Or Something Else...!
What Modules You Use?!
Can U Say Them?

Mohammad_pd said:
Lucky Patcher To Patch Poweramp Or Something Else...!
What Modules You Use?!
Can U Say Them?
Click to expand...
Click to collapse
Careful! Apps like Lucky Patcher are not very welcomed over here. There's plenty of free apps to try. Personally i'm using AIMP with Viper Audio. It works miracles compared to built-in options. Oh, and xposed modules i currently use: Adblocker, All notifications expanded, Amplify, App settings, Always expandable notifications, Awesome pop-up video, Clarity, DS Battery saver, Fix LP Memory leak, Greenify, Handle external storage, Notification manager, Sense Toolbox, Xinsta, Youtube adaway, Youtube background play. That's the ones always active. And i play many more to try them out. The list grows with time.

vanshee said:
Careful! Apps like Lucky Patcher are not very welcomed over here. There's plenty of free apps to try. Personally i'm using AIMP with Viper Audio. It works miracles compared to built-in options. Oh, and xposed modules i currently use: Adblocker, All notifications expanded, Amplify, App settings, Always expandable notifications, Awesome pop-up video, Clarity, DS Battery saver, Fix LP Memory leak, Greenify, Handle external storage, Notification manager, Sense Toolbox, Xinsta, Youtube adaway, Youtube background play. That's the ones always active. And i play many more to try them out. The list grows with time.
Click to expand...
Click to collapse
I Used Sense Toolbox Before, It Reduces My Device Speed, But I'm Using Normal Framework,Not The Systemless One...
You Are Making Me To Go And Install Magisk...???

vanshee said:
There's another option - go to HTCdev to unlock your bootloader, It's a simple procedure, then find a TWRP for your device (mine is A55ML), and go to Magisk thread. Flash Magisk as per instructions - it has it's own built-in root and init.d simulator. The best part is that Magisk will let you run everything in systemless mode - with Magisk you'll have root, xposed, busybox, and various other modules. All of them without touching the system partition. It's very easy to unroot if you decide to do so for some reason. I even got to install Viper Audio. Also there's module that enables writing on external sd card. Since i got Magisk i got to modify a lot of things with systemless xposed. Good luck!
View attachment 4046740 View attachment 4046741 View attachment 4046742 View attachment 4046743
View attachment 4046748 View attachment 4046749 View attachment 4046750 View attachment 4046751
Click to expand...
Click to collapse
I'm currently using E9pw_Android5.0_Sense70_E1 rom with TWRP v2.860, and to be honest the ROM is decent but that's all to it. i tried in the past to install xposed but failed multiple times. I saw your comment on Magisk and i was wondering if i could install it on my ROM as well.
what ROM are you using currently? is it an updatable ROM?
I'm from South East Asia btw thanks.
some details of my htc:
HTC E9pw a55ml dtul
arm64 architecture

Ok. And a fair warning - Everything you do is on your own risk. I'm not responsible if you brick your device. As that being said, i'll give you links and tell you exactly what i did to make it work.
First and most important - do yourself a favor - make a complete backup in TWRP.
I see you're using old version of TWRP, here's the new one - it works way better. https://forum.xda-developers.com/one-m9/one-e9/recovery-twrp-recovery-3-0-0-1-t3321147
Flash the image trough recovery and reboot into recovery to load the new one. Now you can do a new backup with the new recovery or just move on. I did a new recovery - it might be a slower way to do things like that but it is way safer like that.
Next - Magisk, https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download latest Magisk, and uninstaller as well, put them in the root of your sdcard. Download xposed and it's uninstaller from here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
In recovery flash Magisk and then xposed. Reboot and you're good to go. You might want to clear cache and dalvik/art. At least that's the way i did it. Magisk installs it's own systemless root so no need for searching for SuperSU or other. Whatever happens - TWRP will say there's no root and will ask you to install - do not do that. Magisk will root your phone but TWRP can't detect it - never install other root if you do install Magisk!!!
With magisk and xposed installed in systemless mode it's up to you what other modules you will use.
There's another way to do that but i never used it. Download the Magisk Manager app from play store and it offers to do everything from within the app.
If everythig goes well go say thanks to the devs in their threads. Don't thank me - i just save you time not to search thing all over the XDA.

dude127 said:
I'm currently using E9pw_Android5.0_Sense70_E1 rom with TWRP v2.860, and to be honest the ROM is decent but that's all to it. i tried in the past to install xposed but failed multiple times. I saw your comment on Magisk and i was wondering if i could install it on my ROM as well.
what ROM are you using currently? is it an updatable ROM?
I'm from South East Asia btw thanks.
some details of my htc:
HTC E9pw a55ml dtul
arm64 architecture
Click to expand...
Click to collapse
I Suggest You NOT To Use Magisk
You Can Say Why...?!
Cause With Phh Superuser You Can't Use Many Things, For Example To Make A Swap File For Ram By Ram Expander And Something Else.
The Only Point That Magisk Have, It's About Viper4Android Fx, But Htc Devices Speakers Are Great Without It Too.
Other Point Is To Be Systemless, But If You Are Very Sensitive On Your Device, Make A Nandroid Backup, And Enjoy Your Full Controlled Device.
If You Are Worry About OTA Updates, Don't Worry, If HTC Release Updates, Just Flash Your Boot Image, Recovery Image And Then System Image By ADB, Then Check For Updates, Let Phone Update, And Then Install TWRP And More...!
Good Luck!

[Guide][10+11][Root] EdXposed + Gravity Box for OOS

Disclaimer: By attempting anything in this thread you assume full responsibility for your actions and your device. I make no promises or guarantees that your phone won't brick itself, bootloop, wipe your data, or catch fire. There is always an inherent risk with this sort of thing, you must accept that risk before you proceed.
This guide will help you get GravityBox running on your OP8 Pro running OOS 10 or 11
Note for Android 11: This post was originally for Android 10 only. Newer versions have been posted for Android 11, so make sure you download the correct ones. The screenshots are still from Android 10, but the process is the same for both.
(Yes, the GravityBox thread also has install steps which as basically a condensed version of this guide, but sometimes it's nice to see something a little more device specific and detailed.)
Android 10: At least on my device this passes SafetyNet and WideVine L1 (Netflix HD)
Android 11 is not passing currently, but I will update if I get that working.
My Model and Versions
Original Guide (Android 10)
OnePlus 8 Pro IN2025
Oxygen OS 10.5.13.IN11AA
Magisk 21.1 (21100)
Magisk Manager 8.0.3 (314)
Magisk 23.0
Riru - Core v21.3
Riru - EdXposed v0.4.6.4 (4563) (SandHook)
EdXposed Manager 4.5.7
GravityBox [Q] v10.0.1
Updated December 2021 (Android 11)
Oxygen OS 11 11.0.9.9.IN11AA
Magisk 23.0
Riru 25.4.4
EdXposed 5.2.2
EdXposed Manager 4.6.2
GravityBox [R] 11.0.5
In theory this should work for any model and any version of OOS 10 / 11, but if your device or OS version are different your mileage may vary.
Note: Newer versions of the above may exist. While it is likely fine to run newer versions, I would strongly urge you to use exactly the above Riru and EdXposed versions unless you know what you are doing.
This guide assumes
You have already unlocked your bootloader
You have already rooted your device
You are running OxygenOS, not a custom ROM
This guide will help you
Configure Magisk
Install and Configure EdXposed
Install GravityBox
Let's get started!
Step 1: Downloads
Download the following and put them on your device. In the "Download" folder is fine, as long as they are accessible by Magisk.
Android 11 Downloads
Download: Magisk 23.0
Download: Riru 25.4.4
Download: EdXposed 5.2.2
Download: EdXposed Manager 4.6.2
Download: GravityBox [R] 11.0.5
Android 10 Downloads
Download: Magisk 23.0
Download: magisk-riru-v21.3.zip
Download: EdXposed-SandHook-v0.4.6.4.4563.-release.zip
Download: EdXposedManager-4.5.7-45700-org.meowcat.edxposed.manager-release.apk
Download: GravityBox_Q_10.0.1.apk
Step 2: Installation
Install EdXposed Manager APK
In Magisk go to the Modules tab and choose "Install from Storage". Select the Riru zip, let it flash, and reboot your device
In Magisk go to the Modules tab and choose "Install from Storage". Select the EdXposed zip, let it flash, and reboot your device
Open EdXposed Manager, make sure it says "EdXposed Framework is active" and you see the correction version in the Device section below.
Install GravityBox [Q] (Android 10) or GravityBox [R] (Android 11) APK from your Downloads.
You should get a popup from EdXposed prompting you to Activate and Reboot. Do that. If you don't get the prompt you can manually activate the module in EdXposed Manager and then reboot your device.
If done right, EdXposed Manager's "Framework" tab should look something like this:
Step 3: Configuration
Note: Android 11 doesn't seem to pass SafetyNet for me, but you can give these steps a try and see if it works better for you.
Android 10, however, worked great.
We need to configure Magisk and EdXposed the right way if we want to pass SafetyNet. This means enabling Magisk Hide, running EdXposed in Application Blacklist Mode, and blacklisting the Google Services Framework.
In Magisk go to Settings and enabled MagiskHide. Then go to the SuperUser (shield icon) tab and go to MagiskHide at the top of the list
Click "Show system apps" and "Show OS apps", then enable (hide) the following:
Google Services Framework
Google Play Store
Google Play Services
Google Pay
(Optional) Anything else matching "Google Play" that you have installed
In EdXposed go to Settings and scroll down to the Framework section and confirm the following settings:
App List Mode: Enabled
White List Mode: Disabled
Instant Module List: Disabled
De-optimize Boot Image: Disabled
Disabled Resource Hooks: Disabled
Force Hook Modules: Enabled
Pass SafetyNet: Enabled
Disable Verbose Logs: Your Preference
Disable Module Logs: Your Preference
It should look something like this:
Next, in EdXposed Manager go to the Applications tab and blacklist (enable) the following:
Google Services Framework
Google Play Store
Google Play Services
Google Pay
(Optional) Anything else matching "Google Play" that you have installed
Again, it should look something like this:
Finally, reboot your device.
Now launch GravityBox and you should be all set. Enjoy!

Troubleshooting
GravityBox cannot find system framework and exits
Try EdXposed YAHFA instead of SandHook. You can get it here: EdXposed-YAHFA-v0.4.6.4.4563.-release.zip
Remove EdXposed SandHook
Reboot
Install EdXposed YAHFA using Magisk the same way you installed SandHook.
Reboot
Try GravityBox again.
As far as I know they both offer the same functionality, but sometimes one will not work for you while the other does. Neither one caused any problems for my device, but YAHFA did not work for me while SandHook did.
My device does not pass SafetyNet
Press your Recent Apps key
Close everything
Open EdXposed Manager
Open Magisk Manager
Run the SafetyNet Check again
It should pass now. If it doesn't, go back and make sure your apps are both configured the way the guide says, and then reboot.
You can use the "DRM Info" app to verify your Widevine level.
My device won't boot or is bootlooping
Because this is a Magisk module, that is our safety net.
Boot into TWRP (See the TWRP thread for details)
Flash the Magisk Uninstaller (From the Downloads section above)
Reboot
Remove Riru Core and EdXposed modules from Magisk Manager
Reboot
Reboot to TWRP and flash Magisk
Before you try again, make sure you follow the steps exactly. Re-download the files in case they were corrupt or incomplete.
You can also try installing them directly from the Magisk Modules tab instead of downloading from Github.

Thanks for taking the time, did this a while back but safety net was borked plus so many mods haven't been updated..
Have been waiting for them to support 11.
Have you tried installing on 11 yet?

I won't be moving to Android 11 until TWRP, EdXposed, and Gravity Box announce support for it. The new version doesn't offer me anything beyond security patches for now, and as someone who dislikes the new UI I'd rather not start using it until I have more control over it.

Very good guide! Kudos

vsTerminus said:
I won't be moving to Android 11 until TWRP, EdXposed, and Gravity Box announce support for it. The new version doesn't offer me anything beyond security patches for now, and as someone who dislikes the new UI I'd rather not start using it until I have more control over it.
Click to expand...
Click to collapse
Lol fair enough.

Does your safetynet always stay passed? Mine sometimes stops working.

Is it possible to add seconds, date and change the icon style in the status bar using EdXposed + Gravity Box?

just so you know it works on 8t on android 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nice to see it's working on A11! Really the only thing that should change are the versions you install.
Thanks for posting!

Just necroing my own thread to say that I finally (lol) updated to Android 11 and was also able to get this working with the following versions
- Riru 25.4.4: https://github.com/RikkaApps/Riru/releases/tag/v25.4.4
- EdXposed 5.2.2: https://github.com/ElderDrivers/EdXposed/releases/tag/v0.5.2.2
- EdXposed Manager 4.6.2: https://github.com/ElderDrivers/EdXposedManager/releases/tag/v4.6.2.0.0
- GravityBox [R] 11.0.5: https://github.com/GravityBox/GravityBox/releases/tag/v11.0.5_r
Riru v26 exists but seems to break compatibility with older modules and EdXposed hasn't been updated since then to be compatible. 25.4.4 is the latest 25.x release and seems to work fine.
So far SafetyNet is not passing, but I'll keep trying.

Question Zygisk/MagiskHide Issue

Has anyone been able to successfully use Pokémon Go/Pikmin Bloom since the removal of MagiskHide? I've tried Xposed Modules, Riru modules, and a handful of other things to try and get them to work. I've also tried Google searching for countless hours on other possible ways to get it to work with no luck.

Check the 23011 update released yesterday.

I don't play it but I installed to see if i could replicate your problem but it worked for me. You shouldn't need any modules to get it to work. Test safetynet to make sure you're passing and review the modules you've installed if safetynet is tripping.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

l_mike said:
Check the 23011 update released yesterday.
Click to expand...
Click to collapse
What is in there update?

hallo dare said:
I don't play it but I installed to see if i could replicate your problem but it worked for me. You shouldn't need any modules to get it to work. Test safetynet to make sure you're passing and review the modules you've installed if safetynet is tripping.
View attachment 5443167View attachment 5443169View attachment 5443171
Click to expand...
Click to collapse
Could you see any stop or gym? You map is empty and that won´t help, sorry.

TheKnux said:
Has anyone been able to successfully use Pokémon Go/Pikmin Bloom since the removal of MagiskHide? I've tried Xposed Modules, Riru modules, and a handful of other things to try and get them to work. I've also tried Google searching for countless hours on other possible ways to get it to work with no luck.
Click to expand...
Click to collapse
Have you tired Smali Patcher?

Smedslund said:
Could you see any stop or gym? You map is empty and that won´t help, sorry.
Click to expand...
Click to collapse
I live in the middle of the country. There is no such buildings, but you can see the Country roads. That any good?

hallo dare said:
I live in the middle of the country. There is no such buildings, but you can see the Country roads. That any good? View attachment 5443191
Click to expand...
Click to collapse
Yes. Thanks!

TheKnux said:
Has anyone been able to successfully use Pokémon Go/Pikmin Bloom since the removal of MagiskHide? I've tried Xposed Modules, Riru modules, and a handful of other things to try and get them to work. I've also tried Google searching for countless hours on other possible ways to get it to work with no luck.
Click to expand...
Click to collapse
Just use magisk 23.0 it works fine even with ob1. As ive said before. And riru dont work with zygisk. At least not now

SafetyNet isn't passing for me. At all. Latest magisk Alpha (Chinese). This is what I'm using currently with Magisk.

Also, this is what I get when I run YASNC. T-Mobile 9 Pro, converted to international, running OB1. Never had this issue before MagiskHide was removed.

hallo dare said:
I don't play it but I installed to see if i could replicate your problem but it worked for me. You shouldn't need any modules to get it to work. Test safetynet to make sure you're passing and review the modules you've installed if safetynet is tripping.
View attachment 5443167View attachment 5443169View attachment 5443171
Click to expand...
Click to collapse
Thanks so much for testing. I disabled all modules, rebooted, and checked safetynet (check my latest post) and that's the result I got.

Here's the result from another SafetyNet checking app. First screenshot is with all modules disabled, second is with modules enabled except anything to do with Riru/Xposed.

TheKnux said:
Here's the result from another SafetyNet checking app.
Click to expand...
Click to collapse
Use magisk props hide module with the device fingerprint.

Dashwood Foxe said:
Use magisk props hide module with the device fingerprint.
View attachment 5443317
Click to expand...
Click to collapse
What device fingerprint are you using? You're on the latest Magisk with MagiskHide removed?

TheKnux said:
What device fingerprint are you using? You're on the latest Magisk with MagiskHide removed?
Click to expand...
Click to collapse
Yes, I just use the OnePlus 9 pro device id ontop of..well you guessed it lol.

Lol on top of the 9 Pro? I'm assuming? Still waking up so correct me if I'm wrong.
What does tour Magisk settings look like. Is Zygisk disabled or MagiskHide?
Mind trying this? It's not available in my country yet so that's why it's from this site. Not available to me on the Play Store.
Pikmin Bloom APK 70.0 Download for Android - Latest version 2023
Do you want to enjoy a fun and new unique adventure game? Try Pikmin Bloom APK for Android now and enjoy an augmented reality game from Nintendo. Enjoy it now.
techbigs.com

TheKnux said:
Lol on top of the 9 Pro? I'm assuming? Still waking up so correct me if I'm wrong.
What does tour Magisk settings look like. Is Zygisk disabled or MagiskHide?
Mind trying this? It's not available in my country yet so that's why it's from this site. Not available to me on the Play Store.
Pikmin Bloom APK 70.0 Download for Android - Latest version 2023
Do you want to enjoy a fun and new unique adventure game? Try Pikmin Bloom APK for Android now and enjoy an augmented reality game from Nintendo. Enjoy it now.
techbigs.com
Click to expand...
Click to collapse
My setup:

****. I didn't have Google Play Services or Google Play Store ticked. Gonna reboot and see.
This is what my props says.

TheKnux said:
****. I didn't have Google Play Services or Google Play Store ticked. Gonna reboot and see.
This is what my props says.
Click to expand...
Click to collapse
Hit 1, follow prompts to select fingerprint (just use the 9 pro's, even if the module says you already are), reboot and presto.

Magisk 24.1 downgrade: warning!

This morning Magisk notified me about the update available (from 23.0 to 24.1). To cut the long story short, it was a complete failure and I was able to revert back to 23.0.
First upgrade went unsuccessful. Magisk stopped loading. Root was lost. Yet it has succeeded to write something into boot, so uninstalling app and reinstalling 23.0 didn't help. Reboot into patched BL didn't give 23.0 root permissions to patch the BL. I have succeeded to patch stock BL with 24.1 and boot into that, then install 24.1. This has root but fails safety net. Now you need to manually flash safetynet-fix-v2.2.0.zip because Magisk does not do magisk hide anymore. That is lost and module library is lost, plus safety net check tool is lost too. OK, with the fix it can pass the basic check, but for example Citi mobile app sees the root anyway. I have decided to downgrade to 23.0 because I only see a loss in functionality without any benefits.
Now you cannot patch BL with 23.0 if you have 24.1 there. You cannot do it if you flash stock BL but have traces of 24.1 app. The only thing which worked for me: in the functional 24.1 app select 'uninstall magisk', 'complete uninstall', then do root from start: install app 23.0, boot into patched with 23.0 BL, direct install from the app. Half a day is lost.
To prevent it from offering any further upgrade I went into app settings, selected custom update channel and pasted there a link to the 23.0 manifest from github. So long as the project is there that shall work.
Bottom line: beware magisk above 23.0!

Bro , you got wrong, just upgraded magisk 24.1,
please read the changelogs of new version ....
https://github.com/topjohnwu/Magisk/releases
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

unknow91 said:
Bro , you got wrong, just upgraded magisk 24.1,
please read the changelogs of new version ....
https://github.com/topjohnwu/Magisk/releases
View attachment 5522143View attachment 5522145View attachment 5522147
Click to expand...
Click to collapse
I was not happy with the whole experience and with the final result when it was finally working. If someone is like me here is the warning and the way to downgrade or prevent an upgrade.
Then an important thing to note: this is the point when the author went to the other side of the barricade, which is reflected in the changelog. From this point it will be a completely different app.

magisk hide not working?

So bad. Same Problem. Magisk Sygisk not working with XPosed. I need Xposed and Magisk Hide/Sygisk.
Thats a wrong change. Wjy they do that? Its so bad. It was wokring and in a new version not. Bad change in Magisk history.

To prevent it from offering any further upgrade I went into app settings, selected custom update channel and pasted there a link to the 23.0 manifest from github.
Click to expand...
Click to collapse
@rampitec, can you please share the link?

MasterBody said:
magisk hide not working?
Click to expand...
Click to collapse
It is removed from magisk. That's in the whatsnew.

thexile said:
@rampitec, can you please share the link?
Click to expand...
Click to collapse
That's the stable 23.0 from github: https://raw.githubusercontent.com/t...4e59f631280cc26ccc6d40a7cf04f7f37/stable.json

MasterBody said:
magisk hide not working?
Click to expand...
Click to collapse
setting, configure denylist

@rampitec:
You're my liberator after I spent hours with that crap. I wonder how you came up with the URL as I could only find the resolved host topjohnwu.github.io mentioned a Wireshark capture to see what the Magisk app tries to retrieve when the default "stable branch" is selected. Maybe I was overcomplicating things.
Anyway, while I might be missing something here in general, it is difficult not to indulge oneself in a rant because what kind of a retarded bull**** is that to remove a feature (whether being replaceable by that Zygisk stuff with yet again addition effort or not yet to be seen) which allows to get apps at least halfway running by hiding the fact of having root access (whereas the necessity also only arises thanks to moronic programming and nowadays pseudo-security paranoia, especially by insecure-by-definition banking apps on the very same device) with no damn easy way to downgrade again or at least select the version one wants.
It is beyond comprehension why also that Magisk manager doesn't offer to simply select the version of preference in case a newer one breaks what was working before. God forbid, instead, even the version 23.0 apparently tries to load parts of the newer 24.1 one now which leads to (non-working) duplicates of the manager ("Magisk" & by default "Settings" then) instead of repackaging itself to only one instance of course.
It is annoying enough that regular application providers forces users into that constant having-to-update-crap but it is almost real life satire for me that even nominally sophisticated ones such as that John Wu Magisk guy* follows the same idiocy.
* who owes me hours of my lifetime while I owe you at least a beer, rampitec!

Everyone needs to start posting their devices and if they are 64 bit ONLY or 64 bit and 32 bit capable because Magisk 24.1 does not support any device that supports 32 bit. If you subscribe to TopJohn Wu, on Twitter, you get notifications with explanations.
https://twitter.com/topjohnwu?t=e4SCxqjXOBnGIqQLc1uNJg&s=09
We can not understand why you get the results you have unless we know your device and OS and you need to know if your device is 64 bit ONLY, or 64 bit and 32 bit capable.
Pete R

little-endian said:
@rampitec:
You're my liberator after I spent hours with that crap. I wonder how you came up with the URL as I could only find the resolved host topjohnwu.github.io mentioned a Wireshark capture to see what the Magisk app tries to retrieve when the default "stable branch" is selected. Maybe I was overcomplicating things.
Click to expand...
Click to collapse
Not much of my work really. Found a link on youtube how to set the channel to some version. Go to github magisk repo, browse for needed version, select view file, select "raw", copy the URL of the page. This is the update channel.

Thank you! It worked for me. After going back to 23, I have changed the update channel url to 0.0.0.0, so there is no update at all. And it's back to normal again.

rampitec said:
That's the stable 23.0 from github: https://raw.githubusercontent.com/t...4e59f631280cc26ccc6d40a7cf04f7f37/stable.json
Click to expand...
Click to collapse
Application hiding process is done, thank you very much. I've been editing the 23.0 version with apktool m for hours. I couldn't think that only the url link would be the solution to get rid of the version upgrade, I was surprised and a very good idea came to my mind. I will integrate the url into the classes.dex file. The new version is a complete disgrace, too bad, don't install it. Tr to En Google Translate

Have you ever seen that Magisk 23 recognizes the root but when update it gets N/A and the app doesn't work but SuperUser still get access. I tried to do trough Path Boot andZip Odin(S7 Edge Android 8.0)
I formatted the device, re-do Stock Rom but dont work.
the App 24, 24.1 or Canary keeps not working (N/A). Less than 8.0.7 work normally
I applied a custom with Android 10,11 and 12. It works

You can patch boot.img over magisk 23.0 apk installer in android and flashed this patch_magisk_boot.img over fastboot / adb on pc. Magisk 23.0 is now work. Downgrade 24.1. Magisk Hide is back and edxposed works.

tI tried to do this, but the magisk 23 app doesn't allow me to patch without updating to 24.1 first..

RootPoG0 said:
tI tried to do this, but the magisk 23 app doesn't allow me to patch without updating to 24.1 first..
Click to expand...
Click to collapse
uninstall magisk befor. magisk root and app.

rampitec said:
...Half a day is lost...
To prevent it from offering any further upgrade I went into app settings, selected custom update channel and pasted there a link to the 23.0 manifest from github. So long as the project is there that shall work.
Bottom line: beware magisk above 23.0!
Click to expand...
Click to collapse
rampitec said:
That's the stable 23.0 from github: https://raw.githubusercontent.com/t...4e59f631280cc26ccc6d40a7cf04f7f37/stable.json
Click to expand...
Click to collapse
Thank you! I had a feeling something weird was going on and I was ignoring the update notification for a few days now. Good thing I did some digging before installing magisk 24.1.

Hello! I'm on a galaxy s9+ running android 10.
I didn't pay attention and clicked on update, and i regret it so much!
i am on magisk 24.1 with zygisk and ramdisk both set to "yes".
I have the uiversal safetynet fix v2.2.1 and google play services and play store hidden on the denylist
I can't pass safetynet, it fails on "basic integrity" and on "cts profile match"
so upset i updated!

[HELP] Magisk question

Hi!
Yesterday i did fresh install / ROOT my RN8P (EEA - V11.0.3.0.PGGEUXM) after long time and i installed magisk V23 (to test if Magisk hide working yet on some app) but when im tryed to
install SafetyNet (V 2.1.1) it tell me to install Riru but to install Riru now i have to install Magisk V24 altleast.....
So my question is...its better i install again last version of magisk (V25.2)?
There is any module that working like magisk hide? i was out of modding for some month so im not up to date yet....
Any answer will be apprecitated ty!

Yes, I prefer installing Magisk 25.2 as it comes with Zygisk which hides itself from other apps.
If that still doesn't works then you can install Shamiko. A module for Zygisk which hides root completely from the device.
If your device doesn't pass the SafetyNet test after installation then it's probably because of the Magisk patched image flashed into the device since nowadays apps can detect if it's a stock android or not.
But I am pretty sure that there are other modules to hide that too.
Sent by me from A50s with TWRP and S12 Revolt Corvus OS.

Someone Anyone said:
Yes, I prefer installing Magisk 25.2 as it comes with Zygisk which hides itself from other apps.
If that still doesn't works then you can install Shamiko. A module for Zygisk which hides root completely from the device.
If your device doesn't pass the SafetyNet test after installation then it's probably because of the Magisk patched image flashed into the device since nowadays apps can detect if it's a stock android or not.
But I am pretty sure that there are other modules to hide that too.
Sent by me from A50s with TWRP and S12 Revolt Corvus OS.
Click to expand...
Click to collapse
- Ok ty so much! so its better im upgrade to last version because its better then v23?
- The problem of installing SafetyNet on V23 its because u need to install Riru that dont support anymore the V23!
So u need to upgrade mandatory to V24 wich make it useless because the last version its better then V24!
PS
I has already had installed v25 but some game detect it and dont let me play that why i downgrade to V23...

Someone Anyone said:
Yes, I prefer installing Magisk 25.2 as it comes with Zygisk which hides itself from other apps.
If that still doesn't works then you can install Shamiko. A module for Zygisk which hides root completely from the device.
If your device doesn't pass the SafetyNet test after installation then it's probably because of the Magisk patched image flashed into the device since nowadays apps can detect if it's a stock android or not.
But I am pretty sure that there are other modules to hide that too.
Sent by me from A50s with TWRP and S12 Revolt Corvus OS.
Click to expand...
Click to collapse
Ok im installed again Magisk v25.2 and installed last safetynet (2.3.1) but its me or they removed safetynet check from magisk??? why they did that???
How to check if my safetynet is passed???
Also i noticed ALL modules is gone....
Wich modules i have to install also???
Also i noticed my Zygisk is marked as yes and ramdisk as no....my ramdisk need to be set as yes?
ty so much.

roberto_1986 said:
Ok im installed again Magisk v25.2 and installed last safetynet (2.3.1) but its me or they removed safetynet check from magisk??? why they did that???
How to check if my safetynet is passed???
Also i noticed ALL modules is gone....
Wich modules i have to install also???
Also i noticed my Zygisk is marked as yes and ramdisk as no....my ramdisk need to be set as yes?
ty so much.
Click to expand...
Click to collapse
Hey!
Sorry for the late reply.
Well for safety net check you have to update the app or simply it isn't available for your device.
You can download the official SafetyNet check app from Playstore.
For ramdisk it depends on your Firmware.

roberto_1986 said:
- Ok ty so much! so its better im upgrade to last version because its better then v23?
- The problem of installing SafetyNet on V23 its because u need to install Riru that dont support anymore the V23!
So u need to upgrade mandatory to V24 wich make it useless because the last version its better then V24!
PS
I has already had installed v25 but some game detect it and dont let me play that why i downgrade to V23...
Click to expand...
Click to collapse
For game detection you have to go to Zygisk > Select Apps for list > Save > Enforce list > Reboot.

Someone Anyone said:
For game detection you have to go to Zygisk > Select Apps for list > Save > Enforce list > Reboot.
Click to expand...
Click to collapse
Im installed both app and magisk to last version! also i have installed EEA MIUI V11.0.3.0.PGGEUXM A9 is the stock firmware! Any other module u suggest i have to install???
I remember i had installed busy box and other modules that i dont remember!
Another weird thing is when im made fresh install seems like most app didnt update to last version why???
ty again for your answer^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

roberto_1986 said:
Im installed both app and magisk to last version! also i have installed EEA MIUI V11.0.3.0.PGGEUXM A9 is the stock firmware! Any other module u suggest i have to install???
I remember i had installed busy box and other modules that i dont remember!
Another weird thing is when im made fresh install seems like most app didnt update to last version why???
ty again for your answer^^
View attachment 5791443
Click to expand...
Click to collapse
Magisk Patch blocks the Google Framework for some time that's why most of the time it is suggested to complete the setup without internet.
For ramdisk your device might not have one but it shouldn't be a problem.
Do you have TWRP installed?

roberto_1986 said:
Im installed both app and magisk to last version! also i have installed EEA MIUI V11.0.3.0.PGGEUXM A9 is the stock firmware! Any other module u suggest i have to install???
I remember i had installed busy box and other modules that i dont remember!
Another weird thing is when im made fresh install seems like most app didnt update to last version why???
ty again for your answer^^
View attachment 5791443
Click to expand...
Click to collapse
You might also have flashed Magisk in recovery partition just like me.
However it will work just normal.

Someone Anyone said:
You might also have flashed Magisk in recovery partition just like me.
However it will work just normal.
Click to expand...
Click to collapse
Hi!
Yes i have installed LR TWRP 3.3.1 - 1104
That is a variant of TWRP recovery!
I remember this was the only recovery that work for my RN8P because the other make my phone stuck...now idk if there is other recovery that work...there is better one?
Also what did u mean for ""Magisk Patch blocks the Google Framework for some time that's why most of the time it is suggested to complete the setup without internet.""
I have rooted my phone many time and this never happend...so what i have to do?
I have to make again fresh install and install every app before the ROOT?
Or this will fixed after couple time???
what i have to do???
Ty again for your support!!!

roberto_1986 said:
Hi!
Yes i have installed LR TWRP 3.3.1 - 1104
That is a variant of TWRP recovery!
I remember this was the only recovery that work for my RN8P because the other make my phone stuck...now idk if there is other recovery that work...there is better one?
Also what did u mean for ""Magisk Patch blocks the Google Framework for some time that's why most of the time it is suggested to complete the setup without internet.""
I have rooted my phone many time and this never happend...so what i have to do?
I have to make again fresh install and install every app before the ROOT?
Or this will fixed after couple time???
what i have to do???
Ty again for your support!!!
Click to expand...
Click to collapse
I don't think that you have to root it again.
It is going to get fixed in a couple of time.
I had suggest you would Install Orange Fox since old stuff results in Faulty.

The TWRP 3.6.1 is better for nt8pro

Someone Anyone said:
I don't think that you have to root it again.
It is going to get fixed in a couple of time.
I had suggest you would Install Orange Fox since old stuff results in Faulty.
Click to expand...
Click to collapse
Hi!
I dont know whats happend because i have ROOT my pone many time without issue but now after made fresh install and rooted again my phone i receive "no sim card" after root and upgraded to last version on magisk (25.2 )
Another weird thing is after couple reboot the icon "no sim card" disappeare and my root is gone....any tip pls???