I heard people brick their phones after flashing magisk. Is that their fault or it's just that magisk doesn't work on this phone yet?
Seems to be the later.
I will test some Magisk versions today.
The manager installs just fine, I downloaded the image from Mi and extracted the boot.img from their firmware. It seems to have been patched just fine with the Magisk app, I haven't flashed it yet, haven't figured out how to get to download mode on this phone. They have a custom boot loader and custom recovery on it. adb reboot download just reboots the phone. I went through the motions of unlocking the bootloader per their instructions but they're having me wait a week before I can unlock the bootloader. I'm hesitant to flash magisk before unlocking the bootloader and making sure I can re-flash with twrp if needed.
Flashing magisk bricks the phone, flashing patched boot.img also bricks the device.
Kingoroot anyone ?
A loot of people brick their phones.. but the sad part is to recover it back.. I dont know why is so hard to unbrick almost everyone Xiaomi phones...
tze_vitamin said:
A loot of people brick their phones.. but the sad part is to recover it back.. I dont know why is so hard to unbrick almost everyone Xiaomi phones...
Click to expand...
Click to collapse
bricking rn8p due to magisk installation is easy to recover by flashing boot.img from stock rom.
astrakid said:
bricking rn8p due to magisk installation is easy to recover by flashing boot.img from stock rom.
Click to expand...
Click to collapse
So did you manage to actually flash or install magisk and obtain root?
donkyshot said:
So did you manage to actually flash or install magisk and obtain root?
Click to expand...
Click to collapse
no, root is not working. but it is easily possible to recover a bootlooping rn8p.
astrakid said:
no, root is not working. but it is easily possible to recover a bootlooping rn8p.
Click to expand...
Click to collapse
Such a shame, I can't believe there's no custom recovery and root available yet for such a popular device. Let's wait and see.
Hey,
This guy here at the twrp thread says that he managed to root with Magisk 19.3.
rrk said:
Hello all,
Can somebody tell me how to replace Chinese ROM with Global one.
I am waiting now for bootloader unlock, abt 100 hrs remain, thanks in advance
Click to expand...
Click to collapse
Is this possible yet? Looking to buy this phone.
razerphynx said:
Is this possible yet? Looking to buy this phone.
Click to expand...
Click to collapse
Should be quite similar to before, but if you flash preloader & lk, you can recover from these bricks. That said, I've never had magisk bricking it for me.
I am on MIUI 12, Android 10, Chinese Beta Rom and I have Magisk installed as well...
Any update on a fully working method to root our device?
Android 11, custom ROM, CFW
astrakid said:
bricking rn8p due to magisk installation is easy to recover by flashing boot.img from stock rom.
Click to expand...
Click to collapse
There is an easier way.
I had twrp as recovery and when i flashed magisk v20 zip it bricked both the normal system and recovery
It was saying "The system has been destroyed"
So i was doing random stuff and found the solution
1) go to fastboot
2) from pc execute the "fastboot flash recovery twrp.img" you probably know how to install twrp
3) then boot to recovery
4) enter password and allow modifications
5) go to reboot > System
Thats how i did it.
I have not tested with other custom recoveries
Hope I help
nakedowl said:
I will test some Magisk versions today.
Click to expand...
Click to collapse
Did other versions of magisk work
Related
Hi everyone
Sorry I am confused; there does not seem to be an ultimate universal root / twrp installation guide for the Xiaomi Mi A2 Lite phone (my son's phone) in 2019.
No offense intended but all these various posts on the topic just help to confuse people!
I managed to unlock the bootloader but can anybody please tell me what is the easiest / user-friendliest way to install twrp (which version?) and root the phone so that I may proceed with flashing LineageOS afterwards to get rid of all the bloatware.?
what about these partitions A & B?
Thanks a lot in advance
https://github.com/tkchn/daisyinstall/blob/master/README.md
This is the guide youre looking for
@barumbads: Thank YOU!
[EDIT] er... this is for flashing a custom rom!
I did some extra research out of XDA
[Guide] How to root Xiaomi Mi A2 Lite
and
How To Root Mi A2 / A2 Lite (Magisk) and Install TWRP Recovery
but again... confusing! which one should I go for?
(I already tried the later one and created another post following an issue with it!)
BenG7 said:
which one should I go for?
Click to expand...
Click to collapse
It depends on what you want to do.
Root doesnt need TWRP, just Magisk. There's a guide on here.
Flashing custom ROMs needs TWRP. Each custom ROM has specific instructions.
There's no one-size-fits-all solution for this phone.
a1291762 said:
It depends on what you want to do.
Root doesnt need TWRP, just Magisk. There's a guide on here.
Flashing custom ROMs needs TWRP. Each custom ROM has specific instructions.
There's no one-size-fits-all solution for this phone.
Click to expand...
Click to collapse
Hi @a1291762 & thanks.
This is what I am saying it is confusing; I have been thru a few phones (samsungs, LGs, lately Xiaomi...)
and the process was first install twrp then root and then you could flash roms
I know when you flash LineageOS, you get root included in dev options so from your explanations I will look how to flash LineageOS but currently I'm struggling installing twrp as you have seen in my other post
BenG7 said:
This is what I am saying it is confusing; I have been thru a few phones (samsungs, LGs, lately Xiaomi...)
and the process was first install twrp then root and then you could flash roms
Click to expand...
Click to collapse
My last phone didn't have A/B or encryption or use Magisk for rooting... So for me everything about this phone was new and different.
I started with stock (android one means I didn't immediately want a custom ROM). Then added Magisk. I added TWRP after edxposed caused me bootloops (magisk manager CLI can run from TWRP). I haven't installed a custom ROM yet but I've got a custom splash and bootanim.
hello guys! im rooting phones some years now but first time im afraid to do that i see alot hard bricks etc so i want to ask
i have the last firmware now global (phone is global 2) if i put twrp for magisk i have to stop upgrade the phone right?
second. i never liked stock roms so again... if i put twrp i can flash whatever rom i want or there are steps every time so i wont brick the phone? thank u guys for ur time
dont do it
For rooting stock ROM, you can flash twrp and flash magisk but you should be careful to pick a recovery which is for android 10 and also not for CFW.
For flashing custom roms, you should read the megathread. It's not very complicated and if you follow the exact steps, you will not get bricked.
alexmanu1 said:
For rooting stock ROM, you can flash twrp and flash magisk but you should be careful to pick a recovery which is for android 10 and also not for CFW.
For flashing custom roms, you should read the megathread. It's not very complicated and if you follow the exact steps, you will not get bricked.
Click to expand...
Click to collapse
with custom rom i need 1 twrp version? or for let's say remix os i need that twrp for lineage i need this twrp.
demezakos said:
with custom rom i need 1 twrp version? or for let's say remix os i need that twrp for lineage i need this twrp.
Click to expand...
Click to collapse
It's all explained in the megathread, sir. For custom ROMs you need CFW recovery but for you to be on CFW you need to flash CFW with a non-CFW recovery.
Best way to do it is in the CrDroid post.
Have a nice day!
tl;dr: flash Android 9 then megathread
demezakos said:
hello guys! im rooting phones some years now but first time im afraid to do that i see alot hard bricks etc so i want to ask
i have the last firmware now global (phone is global 2) if i put twrp for magisk i have to stop upgrade the phone right?
second. i never liked stock roms so again... if i put twrp i can flash whatever rom i want or there are steps every time so i wont brick the phone? thank u guys for ur time
Click to expand...
Click to collapse
i tried rooting with magisk on latest android 10 miui 11 , basically you will fail safetynet and basic integrity will fail as well you can try to hide fingerprint with magisk busybox and props module and type su to give termux root access and edit fingerprint to pixel 4 but it's not guaranteed i don't know if there is google attestation hardware in begonia anyways you can try.
here's a pic from pixel experience safetynet.(not rooted)
https://imgur.com/a/A6eqlSg
Hi,
I use a RMX2063 since last month, rooted with the TWRP method I found in this forum since day 0. I tried to install the lastest OTA update, that was released last week (RMX2063 _11_A.22), but I have issues to keep magisk working.
Either I do a clean install or a dirty flash, I enter into a bootloop every time I flash lastest magisk version (20.4). Otherwise, the phone works OK if I reflash the OTA and use it without rooting.
Any solutions to that, so I don´t have to downgrade the phone?
Jpigas said:
Hi,
I use a RMX2063 since last month, rooted with the TWRP method I found in this forum since day 0. I tried to install the lastest OTA update, that was released last week (RMX2063 _11_A.22), but I have issues to keep magisk working.
Either I do a clean install or a dirty flash, I enter into a bootloop every time I flash lastest magisk version (20.4). Otherwise, the phone works OK if I reflash the OTA and use it without rooting.
Any solutions to that, so I don´t have to downgrade the phone?
Click to expand...
Click to collapse
It doesn't work. In order for me to get root afterwards is to flash the latest for rmx2061, extract the boot.img, modify it with magisk and flash the modified boot.img afterwards
mepadiernos said:
It doesn't work. In order for me to get root afterwards is to flash the latest for rmx2061, extract the boot.img, modify it with magisk and flash the modified boot.img afterwards
Click to expand...
Click to collapse
First of all, thx for the quick response.
I think I already tried that, you mean flashing the modified boot.img via TWRP? (install -> install image -> "boot")?
After that I had another bootloop ("system image is destroyed" realme message)
Jpigas said:
First of all, thx for the quick response.
I think I already tried that, you mean flashing the modified boot.img via TWRP? (install -> install image -> "boot")?
After that I had another bootloop ("system image is destroyed" realme message)
Click to expand...
Click to collapse
I was actually referring to flashing via fastboot.
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
mepadiernos said:
I was actually referring to flashing via fastboot.
Click to expand...
Click to collapse
The phone enters bootloop anyway (system destroyed), but thank you anyway @mepadiernos. Any other idea?
Jpigas said:
The phone enters bootloop anyway (system destroyed), but thank you anyway @mepadiernos. Any other idea?
Click to expand...
Click to collapse
Hmmm, I do remember that the twrp provided here for the Realme 6 Pro breaks encryption after I upgraded to .27 so I had to flash the .20 for rmx2061 via stock recovery. I had to put the ozip in the microsd. I believe that will factory reset the phone. When it does I went through the process of setting up my phone sans root. I installed magisk manager and proceeded to patch the extracted boot image from the ozip, the update for the rmx2061, and flashing via fastboot. So, I have root but no twrp.
mepadiernos said:
Hmmm, I do remember that the twrp provided here for the Realme 6 Pro breaks encryption after I upgraded to .27 so I had to flash the .20 for rmx2061 via stock recovery. I had to put the ozip in the microsd. I believe that will factory reset the phone. When it does I went through the process of setting up my phone sans root. I installed magisk manager and proceeded to patch the extracted boot image from the ozip, the update for the rmx2061, and flashing via fastboot. So, I have root but no twrp.
Click to expand...
Click to collapse
It doesn´t worked for me, buy, anyway, I´m planning to downgrade due to the very high power consumption. Nowadays the phone struggles to reach 3-4h screen on, versus the 6h I managed to reach on previous version. What do you guys think about it?
Can anyone write an up-to-date guide on precisely what I need to do to install TWRP on a global-edition, fully updated (MIUI 12) Note 8 Pro today?...
There are three different guides and none of them work. I'm not interested in custom firmwares or anything else besides TWRP. I just want to install TWRP and magisk.
We are in the same boat...
Edit: N/A
Are you able to unlock your bootloader?
Also, pay really close attention to the warning at the top of the TWRP downloads page for your device.
WARNING: This device hard bricks really easily for unknown reasons. Restoring device without spending real money is impossible as of now. Don't flash TWRP unless you are an advanced user who knows what he is doing.
Click to expand...
Click to collapse
Additionally, there are a lot of weird quirks all over the place, which makes your device... non-optimal for modding.
Let me know if you really want help with this.
I really just wanted root and didn't realize you aren't supposed to use TWRP for it on new phones (especially this one.)
sfaeium said:
I really just wanted root and didn't realize you aren't supposed to use TWRP for it on new phones (especially this one.)
Click to expand...
Click to collapse
It's not that you're not supposed to use TWRP. It's that you need to know what you're doing.
That device you have is very easy to brick. I'm just making sure.
If you do only want root, that is very easy. First: do you have an unlocked bootloader? Second: exactly what software version do you have?
LoganDark said:
It's not that you're not supposed to use TWRP. It's that you need to know what you're doing.
That device you have is very easy to brick. I'm just making sure.
If you do only want root, that is very easy. First: do you have an unlocked bootloader? Second: exactly what software version do you have?
Click to expand...
Click to collapse
I have read many post about "how to root RN8P" but in none of these there was a clear and decisive answer!
For example mine RN8P with A9 and bootloader unlocked go in bootloop everytime im trying to install TWRP ---->
twrp-3.4.0-0-begonia.img28.5M2020-06-21 22:25:46 EDT
so what custom recovery i need to install???
roberto_1986 said:
I have read many post about "how to root RN8P" but in none of these there was a clear and decisive answer!
For example mine RN8P with A9 and bootloader unlocked go in bootloop everytime im trying to install TWRP ---->
twrp-3.4.0-0-begonia.img28.5M2020-06-21 22:25:46 EDT
so what custom recovery i need to install???
Click to expand...
Click to collapse
I would recommend installing Magisk first since then you can use the TWRP installer.
LoganDark said:
I would recommend installing Magisk first since then you can use the TWRP installer.
Click to expand...
Click to collapse
wait...i dont understand....
usualy first u need to install the recovery then u can root your phone....
can u explain better pls?
roberto_1986 said:
wait...i dont understand....
usualy first u need to install the recovery then u can root your phone....
can u explain better pls?
Click to expand...
Click to collapse
Installing Magisk from recovery is a legacy option and no longer recommended. The recommended method of installing Magisk consists of patching the boot image using the Magisk Manager app and then using fastboot to flash the patched boot image to the phone.
Installing TWRP is then as easy as using Magisk Manager to flash the TWRP installer zip, then reinstalling Magisk using direct install.
In order to retrieve a boot image to patch, you need to download the update you are using to a computer, then use a tool like Payload Dumper to extract the boot.img.
Kind of complex but it's the only option if installing TWRP without it bootloops you.
LoganDark said:
Installing Magisk from recovery is a legacy option and no longer recommended. The recommended method of installing Magisk consists of patching the boot image using the Magisk Manager app and then using fastboot to flash the patched boot image to the phone.
Installing TWRP is then as easy as using Magisk Manager to flash the TWRP installer zip, then reinstalling Magisk using direct install.
In order to retrieve a boot image to patch, you need to download the update you are using to a computer, then use a tool like Payload Dumper to extract the boot.img.
Kind of complex but it's the only option if installing TWRP without it bootloops you.
Click to expand...
Click to collapse
Well ty for your answer but i really cant understand your explanation....
also there is another way to install a custom recovery and its LR TWRP!
i did many month ago with success but a week ago for wrong im uninstalled magisk so now i have to repeate all from zero...
I find that LR TWRP from this thread but unfortunately the link is dead ----> here so can u tell me where i can find that version of LR TWRP 1104??
also can u show me a link for your guide also??? ty very much
roberto_1986 said:
Well ty for your answer but i really cant understand your explanation....
also there is another way to install a custom recovery and its LR TWRP!
i did many month ago with success but a week ago for wrong im uninstalled magisk so now i have to repeate all from zero...
I find that LR TWRP from this thread but unfortunately the link is dead ----> here so can u tell me where i can find that version of LR TWRP 1104??
also can u show me a link for your guide also??? ty very much
Click to expand...
Click to collapse
I don't own this device so I don't know any guides. The process is the same for most devices and the scripts will automate it for you.
Like I said, find a software update for your phone (search "miui 12.4.847.37586 OTA update zip" or similar), use Payload Dumper to extract a boot.img, transfer it to your device, install Magisk Manager and use that to patch the image, download the patched image to your computer, boot the phone into fastboot and flash the new boot image, and you'll have Magisk.
From there, go to the official TWRP website and download the "twrp-installer" for your device. Use Magisk Manager to install it. Then direct install Magisk to keep root.
LoganDark said:
I don't own this device so I don't know any guides. The process is the same for most devices and the scripts will automate it for you.
Like I said, find a software update for your phone (search "miui 12.4.847.37586 OTA update zip" or similar), use Payload Dumper to extract a boot.img, transfer it to your device, install Magisk Manager and use that to patch the image, download the patched image to your computer, boot the phone into fastboot and flash the new boot image, and you'll have Magisk.
From there, go to the official TWRP website and download the "twrp-installer" for your device. Use Magisk Manager to install it. Then direct install Magisk to keep root.
Click to expand...
Click to collapse
sry i dont understand can u explain more easly?
I am from the Philippines. Rooting my old tablet MyPhone brown 1, with Nougat OS installed, is my biggest frustration. Tried Kingroot & Kingoroot but failed so anyone who can help me Pls.!!!
roberto_1986 said:
sry i dont understand can u explain more easly?
Click to expand...
Click to collapse
I know it's a lot to look at but please do just try to follow them in order. Each step is only a few words long.
What software version is your phone at?
xdagogo2017 said:
I am from the Philippines. Rooting my old tablet MyPhone brown 1, with Nougat OS installed, is my biggest frustration. Tried Kingroot & Kingoroot but failed so anyone who can help me Pls.!!!
Click to expand...
Click to collapse
this thread are for redmi note 8 pro this is not the correct place to ask....>.>
roberto_1986 said:
this thread are for redmi note 8 pro this is not the correct place to ask....>.>
Click to expand...
Click to collapse
Sorry !!!I,m new member!
LoganDark said:
I know it's a lot to look at but please do just try to follow them in order. Each step is only a few words long.
What software version is your phone at?
Click to expand...
Click to collapse
Well this is the version i have installed:
Redmi Note 8 Pro EEAStableFastbootV11.0.3.0.PGGEUXM9.03.5 GB2019-12-10Download
roberto_1986 said:
Well this is the version i have installed:
Redmi Note 8 Pro EEAStableFastbootV11.0.3.0.PGGEUXM9.03.5 GB2019-12-10Download
Click to expand...
Click to collapse
Hey!! Fun fact, you don't need to use payload dumper for that! Download the "Full ROM" with "Type: Recovery", and unzip it. Inside there will be a "boot.img". That's what you patch using Magisk Manager.
Seeing a lot of issues with Android 11 and 12 unlocking the bootloader and applying root. Is now not a good time to upgrade or should I wait for a boot image?
Not quite sure what you're referring to, but there are zero issues with unlocking the bootloader or rooting your device...
I can't speak for TWRP. I have had issues with it the last few versions so I had to make due without it. If I am mistaken about having twrp on the OP9 Pro on the newest LE2125 c61 update, I'd be interested.
Anyway, my response is mostly to address your question regarding root. Here are the steps that worked for me.
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
I have been rooted since day one on both A11 & A12. I'm running stock and haven't had a single issue.
Avoid TWRP, it's known to not work properly on A12
If you like to flash a custom ROM. Follow the instructions and you will be fine.
I am coming off the oneplus 7pro was enjoying TWRP and Magisk, with Exposed now I am hearing TWRP isn't working on anything above 10.0 ver. Guess I have to do so more research or pay Monfrio a ransom to work on TWRP.
intense21 said:
I am coming off the oneplus 7pro was enjoying TWRP and Magisk, with Exposed now I am hearing TWRP isn't working on anything above 10.0 ver. Guess I have to do so more research or pay Monfrio a ransom to work on TWRP.
Click to expand...
Click to collapse
there is no need for TWRP...
Smedslund said:
I have been rooted since day one on both A11 & A12. I'm running stock and haven't had a single issue.
Avoid TWRP, it's known to not work properly on A12
If you like to flash a custom ROM. Follow the instructions and you will be fine.
Click to expand...
Click to collapse
How do you root without twrp? or you mean to just boot twrp and not install it?
CtrlValCanc said:
How do you root without twrp? or you mean to just boot twrp and not install it?
Click to expand...
Click to collapse
Use Magisk, patch bootimg , install and reboot.
Read this usefull guide.
Smedslund said:
Use Magisk, patch bootimg , install and reboot.
Read this usefull guide.
Click to expand...
Click to collapse
thank you, i couldn't find what boot.img to download (and how), but this guide has already all!
CtrlValCanc said:
thank you, i couldn't find what boot.img to download (and how), but this guide has already all!
Click to expand...
Click to collapse
I always just sideload. (downdload magisk apk & rename to zip before)
this way you do not need the extra boot.img I think.
vincemue said:
I always just sideload. (downdload magisk apk & rename to zip before)
this way you do not need the extra boot.img I think.
Click to expand...
Click to collapse
could you explain better? I never used sideload before. What commands do you use?
CtrlValCanc said:
could you explain better? I never used sideload before. What commands do you use?
Click to expand...
Click to collapse
If you want to install any add-ons, Reboot to Recovery, then when your device reboots, click Apply Update, then Apply from ADB, then adb sideload filename.zip those packages in sequence. (GAPPS or Magisk for example)
for example for magisk:
download the newest magisk apk version
after download, rename it and instead of .apk do it .zip
go into revovery and click Apply Update, then Apply from ADB
command is : "adb sideload Magisk-v2X.X.zip"
you must exchange X for your version.
Boot images gets patched
please note that I am not an expert, that is just what I found somewhere and use since then.
if you need more information you could also check the install instructions for lineageOS to get to know some basics: https://wiki.lineageos.org/devices/lemonadep/install