Develop Bugs

[Q] tmo z2 force cant flash stock, but will boot other rom

hey guys,
the z2 i have is doing something off the wall, it will boot to the du rom and work, but if i try to flash all from the fastboot screen, it kicks major errors.
i did notice that in the messages the "baseband" is missing.
Ive tried numerous drivers, stock roms for tmo, etc, and nothing ever works. i cant even get twrp to load following all the instructions.
Please help before i go bald

Here is the screen of the fastboot scree I get

undisputedfb said:
Here is the screen of the fastboot scree I get
Click to expand...
Click to collapse
run
Code:
fastboot getvar all
Please post it here after you remove the IMEI line
Sent from my ali using XDA Labs

sd_shadow said:
run
Code:
fastboot getvar all
Please post it here after you remove the IMEI line
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
here is the output::
C:\Users\undisputed\Downloads>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224X9HV3
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 84693F2A
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: (removed)
(bootloader) meid:
(bootloader) date: 04-08-2018
(bootloader) sku: XT1789-04
(bootloader) carrier_sku: XT1789-04
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4326
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:8.0.0/OCX
(bootloader) ro.build.fingerprint[1]: 27.109-36/43:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.11.43.nash_tmo_c.
(bootloader) ro.build.version.full[1]: tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g6174029 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Dec 8 05:13:04 CST 2017
(bootloader) git:abl: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) git:xbl: MBM-3.0-nash_tmo-9869834-180130
(bootloader) gitmic: MBM-3.0-nash_tmo-9869834-180130
(bootloader) git:rpm: MBM-3.0-nash_tmo-b13e14f-180130
(bootloader) git:tz: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:hyp: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:devcfg: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:cmnlib: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:cmnlib64: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:keymaster: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:storsec: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) gitrov: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 7
all: listed above
finished. total time: 0.697s

undisputedfb said:
run
here is the output::
C:\Users\undisputed\Downloads>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224X9HV3
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 84693F2A
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: (removed)
(bootloader) meid:
(bootloader) date: 04-08-2018
(bootloader) sku: XT1789-04
(bootloader) carrier_sku: XT1789-04
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4326
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:8.0.0/OCX
(bootloader) ro.build.fingerprint[1]: 27.109-36/43:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.11.43.nash_tmo_c.
(bootloader) ro.build.version.full[1]: tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g6174029 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Dec 8 05:13:04 CST 2017
(bootloader) git:abl: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) git:xbl: MBM-3.0-nash_tmo-9869834-180130
(bootloader) gitmic: MBM-3.0-nash_tmo-9869834-180130
(bootloader) git:rpm: MBM-3.0-nash_tmo-b13e14f-180130
(bootloader) git:tz: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:hyp: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:devcfg: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:cmnlib: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:cmnlib64: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:keymaster: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) git:storsec: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) gitrov: MBM-3.0-nash_tmo-7d478e6-180130
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 7
all: listed above
finished. total time: 0.697s
Click to expand...
Click to collapse
You are using
https://mirrors.lolinet.com/firmware/moto/nash/official/TMO/
Sent from my ali using XDA Labs

I tried the flashall with the 8.0 firmware and and won't load. Rsdlite won't even see the device, yest fastboot see's it. I've reinstalled the drivers numerous times. I'll try again with firmware from the link you provided tomorrow and see what it does.

I should be able to do it from the fastboot screen from the first post, right?

undisputedfb said:
I tried the flashall with the 8.0 firmware and and won't load. Rsdlite won't even see the device, yest fastboot see's it. I've reinstalled the drivers numerous times. I'll try again with firmware from the link you provided tomorrow and see what it does.
Click to expand...
Click to collapse
RSD Lite doesn't work with most Windows 10 machines unless they shipped with Windows 7 or XP
Sent from my ali using XDA Labs

I get this when trying flashall with the firmware I downloaded from the link::

undisputedfb said:
I get this when trying flashall with the firmware I downloaded from the link::
Click to expand...
Click to collapse
Have you tried LMSA's Flash rescue option?
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ali using XDA Labs

sd_shadow said:
Have you tried LMSA's Flash rescue option?
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
negative, says " failed to match connected device" and i did choose the correct model from the barcodes screen - xt1789-04

Check your cable and make sure you're using a 2.0 port off the motherboard if possible. Make sure adb and fastboot files are up to date, and that your flashall.bat is correct.

Stuck in bootloop after failed .IMG install

Hello all. Hoping someone can help me out. After quite a few years of being out of the phone tinkering world, I ended up with a G6 play lying around and wanted to try LOS 16.00 as a test to see if it could be a daily driver for me.But unfortunately I ended up in a boot loop somewhere. I think? I backed up the stock .IMG with ADB but reflashing what I think is the stock file, or any other .IMG files have not been working. Hoping someone can lend a hand, Thanks!

ThinkL16 said:
Hello all. Hoping someone can help me out. After quite a few years of being out of the phone tinkering world, I ended up with a G6 play lying around and wanted to try LOS 16.00 as a test to see if it could be a daily driver for me.But unfortunately I ended up in a boot loop somewhere. I think? I backed up the stock .IMG with ADB but reflashing what I think is the stock file, or any other .IMG files have not been working. Hoping someone can lend a hand, Thanks!
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
Post it here after you remove the IMEI line.
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Post it here after you remove the IMEI line.
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Really appreciate the help, Thank you! If I'm not mistaken it should be the Unlocked Motorola retail model.
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 8
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZL52289K8M
(bootloader) cid: 0x0032
(bootloader) channelid: 0x81
(bootloader) uid: B01230FF00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
----------------------------------IMEI Line removed
(bootloader) meid:
(bootloader) date: 09-15-2018
(bootloader) sku: XT1922-9
(bootloader) carrier_sku: XT1922-9
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Apr 4 21: 6: 2 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/jeter/jeter:9/PPPS29.118-
(bootloader) ro.build.fingerprint[1]: 68-9/329ef:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.15.jeter.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-04300-89xx.0
(bootloader) version-baseband: M8920_34.26.11.75R JETER_NA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-gc55108dd264
(bootloader) kernel.version[1]: 9 ([email protected]) (gcc version 4.9
(bootloader) kernel.version[2]: .x 20150123 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Sat Apr 4 11:42:06 CDT 2020
(bootloader) sbl1.git: MBM-2.1-jeter_retail-5e077487fa-200404
(bootloader) rpm.git: MBM-2.1-jeter_retail-fcf56e9a-200404
(bootloader) tz.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) devcfg.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) keymaster.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib64.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) prov.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) aboot.git: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: bwaca
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown

sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Post it here after you remove the IMEI line.
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Update! So I'm still able to boot to the bootloader, and I was just able to boot into TWRP. So what would be the next step in the process? I was looking to go to LOS or something with some better privacy than stock android.

ThinkL16 said:
What does getvar all say?
Really appreciate the help, Thank you! If I'm not mistaken it should be the Unlocked Motorola retail model.
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 8
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZL52289K8M
(bootloader) cid: 0x0032
(bootloader) channelid: 0x81
(bootloader) uid: B01230FF00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
----------------------------------IMEI Line removed
(bootloader) meid:
(bootloader) date: 09-15-2018
(bootloader) sku: XT1922-9
(bootloader) carrier_sku: XT1922-9
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Apr 4 21: 6: 2 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/jeter/jeter:9/PPPS29.118-
(bootloader) ro.build.fingerprint[1]: 68-9/329ef:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.15.jeter.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-04300-89xx.0
(bootloader) version-baseband: M8920_34.26.11.75R JETER_NA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-gc55108dd264
(bootloader) kernel.version[1]: 9 ([email protected]) (gcc version 4.9
(bootloader) kernel.version[2]: .x 20150123 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Sat Apr 4 11:42:06 CDT 2020
(bootloader) sbl1.git: MBM-2.1-jeter_retail-5e077487fa-200404
(bootloader) rpm.git: MBM-2.1-jeter_retail-fcf56e9a-200404
(bootloader) tz.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) devcfg.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) keymaster.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib64.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) prov.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) aboot.git: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: bwaca
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
Click to expand...
Click to collapse
Ok if you want to go back to stock use this firmware
https://mirrors.lolinet.com/firmware/moto/jeter/official/BWACA/
See
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my ali using XDA Labs
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
ThinkL16 said:
What does getvar all say?
Update! So I'm still able to boot to the bootloader, and I was just able to boot into TWRP. So what would be the next step in the process? I was looking to go to LOS or something with some better privacy than stock android.
Click to expand...
Click to collapse
Not sure what custom ROMs are available for your device.
Look for ROMs for Jeter not Ajeter
Sent from my ali using XDA Labs

sd_shadow said:
Ok if you want to go back to stock use this firmware
https://mirrors.lolinet.com/firmware/moto/jeter/official/BWACA/
See
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my ali using XDA Labs
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
Not sure what custom ROMs are available for your device.
Look for ROMs for Jeter not Ajeter
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Thank you! I got everything back via ADB commands to stock. Any recommendation on how to get LOS going?

Just got LOS 16 with no gapps going via TWRP recovery, perfect. Thanks for the help!

Sprint: Revert from LineageOS 17.1 to Stock OREO - Wifi and Sim not working

Hi
I got my mobile with Android 9 installed on my sprint (XT1789-03). I installed lineageOS 17.1 and worked fine without any issues. But after a month it starts rebooting randomly. So I tried flashing the update but this cause it not to boot and it goes to lineage animation and then reboots. So I installed Sprint Retail Android 8.0: XT1789-03_NASH_SPRINT_8.0.0_OCXS27.109-48-20_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
It installed without any issues. But now my baseband is not found (written in bootloader). My wifi and sim not working.
Please anyone help me solve this issue

@Uzephi

Hasan Khurshid said:
Hi
I got my mobile with Android 9 installed on my sprint (XT1789-03). I installed lineageOS 17.1 and worked fine without any issues. But after a month it starts rebooting randomly. So I tried flashing the update but this cause it not to boot and it goes to lineage animation and then reboots. So I installed Sprint Retail Android 8.0: XT1789-03_NASH_SPRINT_8.0.0_OCXS27.109-48-20_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
It installed without any issues. But now my baseband is not found (written in bootloader). My wifi and sim not working.
Please anyone help me solve this issue
Click to expand...
Click to collapse
Same problem here, but XT1789-04
IMEI shows up fastboot getvar, but in fastboot it says "Baseband: <not found>". Wifi doesn't work and the network mac address is 0200000000. Firmware is stuck at 8.0.0. I can flash and run any ROM (Lineage, stock) but Wifi nver works and baseband always says not round.
I've tried a dozen different NON-HLOS.bin files and flashalls and nothing will give me baseband back.
This doesn't work:
https://forum.xda-developers.com/z2...m-tmo-z2-force-27-1-5-flashall-march-t3917070

ryazbeck said:
Same problem here, but XT1789-04
IMEI shows up fastboot getvar, but in fastboot it says "Baseband: <not found>". Wifi doesn't work and the network mac address is 0200000000. Firmware is stuck at 8.0.0. I can flash and run any ROM (Lineage, stock) but Wifi nver works and baseband always says not round.
I've tried a dozen different NON-HLOS.bin files and flashalls and nothing will give me baseband back.
This doesn't work:
https://forum.xda-developers.com/z2...m-tmo-z2-force-27-1-5-flashall-march-t3917070
Click to expand...
Click to collapse
I hope you haven't tried any nonhlos that was not made for your mobile. Have you tried flashing the last AT&T firmware? If not, You can download from here: https://mirrors.lolinet.com/firmware/moto/nash/official/ATT/

@ryazbeck How did you lost your baseband?

@ryazbeck How did you lost your baseband?

Hasan Khurshid said:
@ryazbeck How did you lost your baseband?
Click to expand...
Click to collapse
I followed the official guide and after it was complete my baseband was dead. It seems the Lineage team has given a big **** you to Moto Z2 Force users
https://wiki.lineageos.org/devices/nash/install
---------- Post added at 04:59 PM ---------- Previous post was at 04:41 PM ----------
Hasan Khurshid said:
@ryazbeck How did you lost your baseband?
Click to expand...
Click to collapse
Hasan Khurshid said:
I hope you haven't tried any nonhlos that was not made for your mobile. Have you tried flashing the last AT&T firmware? If not, You can download from here: https://mirrors.lolinet.com/firmware/moto/nash/official/ATT/
Click to expand...
Click to collapse
Hasan, I finally got it to work using this guide
https://forum.xda-developers.com/z2...m-tmo-z2-force-27-1-5-flashall-march-t3917070
The only difference is that I booted into stock recovery and formatted everything before using the updated Flashalls on the 27.1.7 TMO rom. Both of those files are attached at the thread I linked.

ryazbeck said:
I followed the official guide and after it was complete my baseband was dead. It seems the Lineage team has given a big **** you to Moto Z2 Force users
https://wiki.lineageos.org/devices/nash/install
Click to expand...
Click to collapse
Yes it seems like some people are having issues with LOS. One person on reddit also had similar problems with LOS. It's good to hear that your phone is in working condition again but mine is sprint so I can't follow that guide. Is your baseband showing now?

Hasan Khurshid said:
Yes it seems like some people are having issues with LOS. One person on reddit also had similar problems with LOS. It's good to hear that your phone is in working condition again but mine is sprint so I can't follow that guide. Is your baseband showing now?
Click to expand...
Click to collapse
Yep, it shows up now.
Have you tried using that guide with this firmware?
https://firmware.center/.zdrive/z_gdrive_viewer.php?ID=1nH3cofg7EK5KUFbKsnGbZsbagNzQQBcE
here's another download of the same firmware https://androidfilehost.com/?fid=746010030569960275

ryazbeck said:
Yep, it shows up now.
Have you tried using that guide with this firmware?
https://firmware.center/.zdrive/z_gdrive_viewer.php?ID=1nH3cofg7EK5KUFbKsnGbZsbagNzQQBcE
here's another download of the same firmware https://androidfilehost.com/?fid=746010030569960275
Click to expand...
Click to collapse
I can't go back to nougat as I am already on Oreo. So nougat modem will not work.

Hasan Khurshid said:
Hi
I got my mobile with Android 9 installed on my sprint (XT1789-03). I installed lineageOS 17.1 and worked fine without any issues. But after a month it starts rebooting randomly. So I tried flashing the update but this cause it not to boot and it goes to lineage animation and then reboots. So I installed Sprint Retail Android 8.0: XT1789-03_NASH_SPRINT_8.0.0_OCXS27.109-48-20_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
It installed without any issues. But now my baseband is not found (written in bootloader). My wifi and sim not working.
Please anyone help me solve this issue
Click to expand...
Click to collapse
You are in dead end...
The pie baseband is not compatible with Oreo...
Do bankflash to save the life or go ahead to trash it out
Sent from my LG-LS997 using Tapatalk

cgigate said:
You are in dead end...
The pie baseband is not compatible with Oreo...
Do bankflash to save the life or go ahead to trash it out
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
It never had a pie baseband or modem. And I never flashed it. But still I can't get it to work. Also for blankflash I cannot go into edl mode. Stock roms are all working fine but without sim and wifi.

Hasan Khurshid said:
It never had a pie baseband or modem. And I never flashed it. But still I can't get it to work. Also for blankflash I cannot go into edl mode. Stock roms are all working fine but without sim and wifi.
Click to expand...
Click to collapse
If you insist "Stock roms are all working fine", then you don't need to do anything.
You lost baseband, you don't have any wireless things: no wifi, no mobile signals...
It is even cannot be a phone.....but may have Bluetooth...
When you fastboot , then you have EDL mode...
Sent from my LG-LS997 using Tapatalk

cgigate said:
If you insist "Stock roms are all working fine", then you don't need to do anything.
You lost baseband, you don't have any wireless things: no wifi, no mobile signals...
It is even cannot be a phone.....but may have Bluetooth...
When you fastboot , then you have EDL mode...
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
Sorry I meant stock roms boot up fine whereas custom roms like LOS can't boot up on my phone. Any solution for no wifi & sim?
fastboot oem blankflash command shows command restricted.

bro i can help you! you need to start the phone and then you need to enable oem unlock at the developer options it will be grayed out you will need another phone to share internet via bluetooth and connect your moto z2 force as its the only thing you can enable bluetooth after that just open the playstore login to your account and oem unlock will be available enable it and put your phone into bootloader mode unlock the bootloader flash the stock rom and restart the phone once its done
note: restart the phone after stock rom is done but without locking the bootloader
after that go to reset options at system settings then reset the phone and start the phone again and you will do this until you get wifi and sim once everything is working again now you can relock the bootloader and reset the phone and everything will be ok again, send pm if you need assistance because my english is not so good

Manuelmartad said:
bro i can help you! you need to start the phone and then you need to enable oem unlock at the developer options it will be grayed out you will need another phone to share internet via bluetooth and connect your moto z2 force as its the only thing you can enable bluetooth after that just open the playstore login to your account and oem unlock will be available enable it and put your phone into bootloader mode unlock the bootloader flash the stock rom and restart the phone once its done
note: restart the phone after stock rom is done but without locking the bootloader
after that go to reset options at system settings then reset the phone and start the phone again and you will do this until you get wifi and sim once everything is working again now you can relock the bootloader and reset the phone and everything will be ok again, send pm if you need assistance because my english is not so good
Click to expand...
Click to collapse
I appreciate that you want to help me. But my bootloader is already unlocked and I can flash stock roms.

Hasan Khurshid said:
I appreciate that you want to help me. But my bootloader is already unlocked and I can flash stock roms.
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_sprint-ab41784-190705
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: SPRINT
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224D2CB4
(bootloader) cid: 0x0032
(bootloader) channelid: 0x86
(bootloader) uid: 77D1F1DC
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: xxxxxxxxxxxxxxxxxxxxxx
(bootloader) meid:
(bootloader) date: 08-28-2017
(bootloader) sku: XT1789-03
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4144
(bootloader) iccid: 89011202000056485193
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:9/PPX29.159-23/
(bootloader) ro.build.fingerprint[1]: 113ea:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.11.23.nash.retail
(bootloader) ro.build.version.full[1]: .en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-06500-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g1f14820 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Jul 5 09:27:21 CDT 2019
(bootloader) git:abl: MBM-3.0-nash_sprint-ab41784-190705
(bootloader) git:xbl: MBM-3.0-nash_sprint-9869834-190705
(bootloader) gitmic: MBM-3.0-nash_sprint-9869834-190705
(bootloader) git:rpm: MBM-3.0-nash_sprint-b13e14f-190705
(bootloader) git:tz: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:hyp: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:devcfg: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:cmnlib: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:cmnlib64: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:keymaster: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:storsec: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) gitrov: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: sprint
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
Finished. Total time: 0.200s

Hasan Khurshid said:
What does getvar all say?
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_sprint-ab41784-190705
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: SPRINT
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224D2CB4
(bootloader) cid: 0x0032
(bootloader) channelid: 0x86
(bootloader) uid: 77D1F1DC
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: xxxxxxxxxxxxxxxxxxxxxx
(bootloader) meid:
(bootloader) date: 08-28-2017
(bootloader) sku: XT1789-03
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4144
(bootloader) iccid: 89011202000056485193
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:9/PPX29.159-23/
(bootloader) ro.build.fingerprint[1]: 113ea:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.11.23.nash.retail
(bootloader) ro.build.version.full[1]: .en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-06500-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g1f14820 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Jul 5 09:27:21 CDT 2019
(bootloader) git:abl: MBM-3.0-nash_sprint-ab41784-190705
(bootloader) git:xbl: MBM-3.0-nash_sprint-9869834-190705
(bootloader) gitmic: MBM-3.0-nash_sprint-9869834-190705
(bootloader) git:rpm: MBM-3.0-nash_sprint-b13e14f-190705
(bootloader) git:tz: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:hyp: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:devcfg: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:cmnlib: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:cmnlib64: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:keymaster: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:storsec: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) gitrov: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: sprint
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
Finished. Total time: 0.200s
Click to expand...
Click to collapse
Normally I refer to this site
https://mirrors.lolinet.com/firmware/moto/nash/official/Sprint/
This is the newest version on that site for Sprint is
XT1789-03_NASH_SPRINT_8.0.0_OCXS27.109-48-20_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Which is Android 8
You have PPX29.159-23/.... Which is Android 9
So you must have flashed a Retail version or the site hasn't been updated.
You could try Lmsa's flash rescue option
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
And see which firmware version it wants to flash.
If it can determine what firmware is needed you will be given a chance to download it and then asked if you want to flash.
If you aren't sure if it's right,
copy the full filename and post it here.
Sent from my payton_sprout using XDA Labs

Hasan Khurshid said:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_sprint-ab41784-190705
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: SPRINT
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224D2CB4
(bootloader) cid: 0x0032
(bootloader) channelid: 0x86
(bootloader) uid: 77D1F1DC
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: xxxxxxxxxxxxxxxxxxxxxx
(bootloader) meid:
(bootloader) date: 08-28-2017
(bootloader) sku: XT1789-03
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4144
(bootloader) iccid: 89011202000056485193
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:9/PPX29.159-23/
(bootloader) ro.build.fingerprint[1]: 113ea:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.11.23.nash.retail
(bootloader) ro.build.version.full[1]: .en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-06500-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g1f14820 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Jul 5 09:27:21 CDT 2019
(bootloader) git:abl: MBM-3.0-nash_sprint-ab41784-190705
(bootloader) git:xbl: MBM-3.0-nash_sprint-9869834-190705
(bootloader) gitmic: MBM-3.0-nash_sprint-9869834-190705
(bootloader) git:rpm: MBM-3.0-nash_sprint-b13e14f-190705
(bootloader) git:tz: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:hyp: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:devcfg: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:cmnlib: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:cmnlib64: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:keymaster: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) git:storsec: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) gitrov: MBM-3.0-nash_sprint-9059a28-190705
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: sprint
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
Finished. Total time: 0.200s
Click to expand...
Click to collapse
you flashed a wrong version there is no pie for sprint variant

Required help- IMEI unknown, no baseband xt1789-06

Hi,
Thanks in advance.
I got a device in which someone has tried installing Lineage and lost IMEI number and Baseband. Now the device is running on Lineage 17.1 and has Lineage recovery. It is a xt1789-06 Indian device. Doesn't exctly know what all steps he followed. Now i tried lot of steps from lot of forums. But nothing helped. Can someone help me with it.

ProGamer02224 said:
Hi,
Thanks in advance.
I got a device in which someone has tried installing Lineage and lost IMEI number and Baseband. Now the device is running on Lineage 17.1 and has Lineage recovery. It is a xt1789-06 Indian device. Doesn't exctly know what all steps he followed. Now i tried lot of steps from lot of forums. But nothing helped. Can someone help me with it.
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Code:
PS F:\minimal_adb_fastboot_1.4.3_portable> .\fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_att-641a15b-180503
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EMEA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 6GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224RHWDL
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: 8AE9CED6
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 356518080619415
(bootloader) meid:
(bootloader) date: 02-07-2018
(bootloader) sku: XT1789-06
(bootloader) carrier_sku: XT1789-06
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3838
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:8.0.0/OPXS27.10
(bootloader) ro.build.fingerprint[1]: 9-49-12/13:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.401.13.nash.retai
(bootloader) ro.build.version.full[1]: l.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g0b041a7 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Nov 2 10:52:10 CDT 2018
(bootloader) git:abl: MBM-3.0-nash_att-641a15b-180503
(bootloader) git:xbl: MBM-3.0-nash_att-9869834-180503
(bootloader) git:pmic: MBM-3.0-nash_att-9869834-180503
(bootloader) git:rpm: MBM-3.0-nash_att-b13e14f-180503
(bootloader) git:tz: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:hyp: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:devcfg: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:cmnlib: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:cmnlib64: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:keymaster: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:storsec: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:prov: MBM-3.0-nash_att-7d478e6-180503
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 2
all: listed above
finished. total time: 0.219s

ProGamer02224 said:
Code:
PS F:\minimal_adb_fastboot_1.4.3_portable> .\fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_att-641a15b-180503
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EMEA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 6GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224RHWDL
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: 8AE9CED6
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 356518080619415
(bootloader) meid:
(bootloader) date: 02-07-2018
(bootloader) sku: XT1789-06
(bootloader) carrier_sku: XT1789-06
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3838
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:8.0.0/OPXS27.10
(bootloader) ro.build.fingerprint[1]: 9-49-12/13:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.401.13.nash.retai
(bootloader) ro.build.version.full[1]: l.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g0b041a7 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Nov 2 10:52:10 CDT 2018
(bootloader) git:abl: MBM-3.0-nash_att-641a15b-180503
(bootloader) git:xbl: MBM-3.0-nash_att-9869834-180503
(bootloader) git:pmic: MBM-3.0-nash_att-9869834-180503
(bootloader) git:rpm: MBM-3.0-nash_att-b13e14f-180503
(bootloader) git:tz: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:hyp: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:devcfg: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:cmnlib: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:cmnlib64: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:keymaster: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:storsec: MBM-3.0-nash_att-7d478e6-180503
(bootloader) git:prov: MBM-3.0-nash_att-7d478e6-180503
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 2
all: listed above
finished. total time: 0.219s
Click to expand...
Click to collapse
This should be the correct firmware
https://mirrors.lolinet.com/firmware/moto/nash/official/RETIN/
XT1789-06_NASH_RETIN_8.0.0_OPXS27.109-49-12_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Try just flashing
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk

Hi,
Now if I install any custom ROM,
I get
Checking for digest file...
Step 1/2
Step 2/2
Updating partition details
Done.
Even in this the step 1/2 loads fully, but step 2/2 stays in zero for a while and then directly says updating partition details. The ROM doesn't gets installed after this.

mot e 5 play xt1921-1 OTA file download pleaae

Lost imie and baseband.tried flash roms but keep getting message gpt..bin error spent like a week trying to figure this out please help.

ghettozo said:
Lost imie and baseband.tried flash roms but keep getting message gpt..bin error spent like a week trying to figure this out please help.
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com

sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
PS C:\Users\Me\Downloads\ADB FASTBOOT FILES WINDOWS> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 7
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZY322RBWLD
(bootloader) cid: 0x0032
(bootloader) channelid: 0x81
(bootloader) uid: 7053A6DC00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 351839090672631
(bootloader) meid:
(bootloader) date: 05-22-2018
(bootloader) sku: XT1921-1
(bootloader) carrier_sku: XT1921-1
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/james_t_f/james_f:8.0.0/O
(bootloader) ro.build.fingerprint[1]: CP27.91-51-4/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5480efb-0001
(bootloader) kernel.version[1]: 6-gd2768b6 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Fri Jul
(bootloader) kernel.version[3]: 20 10:36:48 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a07261-dirty
(bootloader) tz.git: git=7ddbcd0b3e
(bootloader) devcfg.git: git=7ddbcd0b3e
(bootloader) keymaster.git: git=7ddbcd0b3e
(bootloader) cmnlib.git: git=7ddbcd0b3e
(bootloader) cmnlib64.git: git=7ddbcd0b3e
(bootloader) prov.git: git=7ddbcd0b3e
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: bwaca
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.316s

MOD ACTION:
Thread closed. The same issue is being discussed HERE