Related
[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Really?
mrhaley30705 said:
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Click to expand...
Click to collapse
Would that actually work cuz im stuck in the same situation... and i just got my tab today after repairs. and i dont wanna screw it up again cuz of parents so im just gonna give it a try to see if it works
Help
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
If you can get your device back into download mode, you could relay the stock firmware from www.stockbroker.net. Select the file you downloaded under pda in Odin and flash it. Hope this helps. You can try to root again from there.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Upgraded to 4.1.1 even after soft-brick !
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Dezzy87 said:
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
Click to expand...
Click to collapse
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
macuruso said:
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
Click to expand...
Click to collapse
can you get into download mode
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
i have the same error (firmware upgrade encountered an issue. please select recovery mode in kies and try again) on my Samsung Galaxy Tab 2 10.1 but i dont have this
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
I cant get my tablet in download or recovery, Kies doesnt recognise my tablet either? what do i do? please if someone has solved it plz plz plz tell me
Also when i plug my tablet into my PC i get "USB device not recognised" how do i fix that too?
akshar102 said:
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Click to expand...
Click to collapse
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
djcnote562 said:
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
Click to expand...
Click to collapse
This is for the S3, flashing it's firmware on the Note 2 won't work. I highly suggest you go on the Note 2 section.
I found a fix for this problem
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Re: [Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try agai
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Sent from my GT-P5113 using xda app-developers app
Download cwm-touch-i717-120414.tar.md5
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
How any pages did you go back to find this thread? It literally has sat, answered and untouched for close to 2 months
it worked
man it worked used the error screen as download mode and it reflashed with even all my settings awesome .... thanks
use one of the $8 dongles. supersimple
cheers
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
You are my hero! Ignore that little girl beneath your post, I'm glad you took the time to post the solution.
Ainol novo 8 discover flashing firmware error
Sir i have ainol novo 8 discover it has a problem that when i install firmware files on my discover with firmware tool there have a problem is data.img file cant install on my tblet software shows WRITE DATA PARTITION FAILED..and u can see screen shot also plzzzz help me what i do.plzz thanks in advance.
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
suppose trongwi
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
note2nooby said:
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
Click to expand...
Click to collapse
Please it is a request , I need a precise method to overcome this problem ... some files in your suggested link doesnot work especially Hotfile.com
Thank you for reading
where can I download "Recovery Package/ROM"? Hotfile.com is not available anymore
Thank you
removed
simple google search gave me this , try to download!
Edit : i took the link off , because it could harm your phone if you are coming from 4.3 android
Ajmal khan
I faced the same problem few days back...
Start kies on ur laptop ( dont connect ur phone yet )
Choose initialisation option
Enter model number
Enter serial number
Now connect ur phone with pc in download mode
Pls make sure u have high speed net for 2-3 hrs...
Bcuz kies download the full rom as per ur serial number
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
note2nooby said:
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
Click to expand...
Click to collapse
No No and Honestly I didnt try that ... I just wanted to freshen my mobile by reinstalling official Firmware 4.1.2 .... oh anyways good news is that I recovered my mobile by following the bellow steps ..
1. Downloaded Official Firmware "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar"
2. Opened Odin
3. and upload the "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar" in PHONE section under PDA (Not PDA) & pressed Start
4. The installation went well but with problems in upgrading applications and continual restarting.
5. again opened Odin and this time I uploaded the official Firmware in PDA and installation went well
6. Booting and registeration also went well.
7. Mobile is back on life
But But
Now my colleague has messed with Note 3 and it also gives the same msg as i had in the beginning "firmware upgrade encountered an issue".
Thank you max621 for your kind help, I will try those for Note3 instead.
Thanks for reading.
ajmalkhan360 said:
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
Click to expand...
Click to collapse
Try to Remove the battery and try to access the RECOVERY
the FIRMWARE was damaged.
I wish that you have nandroid backups there.
I already experienced that and just rebooted to recovery and restoring by nandroid.
Glad to see your phone is back up and running ...
next time you want refresh your phone , just do simple factory reset!
Glad to hear that u recovrr ur phone.. but for note3 u must install kies3 first....
Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
umaga2012 said:
Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
Click to expand...
Click to collapse
did you put the .pit file?
I flashed a file with a single package through PDA
Sent from my GT-I8190 using XDA Free mobile app
My samsung grand dous got suddenly off and I had to flash stocks rom with Odin again but the problem is that every time try to flash it strucks on initialsation or setup connection... I tried with multiple ports and Odin versions.. replace battery also but no sucess .. tried pit file then it shows nand write start .. failed
Help please
pratyaksh tyagi said:
My samsung grand dous got suddenly off and I had to flash stocks rom with Odin again but the problem is that every time try to flash it strucks on initialsation or setup connection... I tried with multiple ports and Odin versions.. replace battery also but no sucess .. tried pit file then it shows nand write start .. failed
Help please
Click to expand...
Click to collapse
SOrry wrong forum..
pratyaksh tyagi said:
SOrry wrong forum..
Click to expand...
Click to collapse
Have you asked in your particular phone's model's forum? That should help since we don't even know what phone you have!!
Thanks for moving the thread ..
someone please help with my issue
pratyaksh tyagi said:
My samsung grand dous got suddenly off and I had to flash stocks rom with Odin again but the problem is that every time try to flash it strucks on initialsation or setup connection... I tried with multiple ports and Odin versions.. replace battery also but no sucess .. tried pit file then it shows nand write start .. failed
Help please
Click to expand...
Click to collapse
When I face this problem, i just check the file which im flashing, sometimes it might have not downloaded properly or you might just be flashing firmware of another mobile. Has always worked for me, hope i helped
Hello guys , i have a problem over here . When i try to install a firmware with odin , it stops at system.img file , its stuck over there , but when i flash all files except the AP big one , it boots up to erasing point , and starts to bootloop with tons of errors showing , but whenever i want to flash all the files ( bootloader , CSC , AP ) it stucks at system.img . Do you have any ideas , what method can i try ? can someone give me a guide to flash the rom through ADB ? Much thanks
pearland12 said:
Hello guys , i have a problem over here . When i try to install a firmware with odin , it stops at system.img file , its stuck over there , but when i flash all files except the AP big one , it boots up to erasing point , and starts to bootloop with tons of errors showing , but whenever i want to flash all the files ( bootloader , CSC , AP ) it stucks at system.img . Do you have any ideas , what method can i try ? can someone give me a guide to flash the rom through ADB ? Much thanks
Click to expand...
Click to collapse
Correct firmware?
Reinstall drivers, or try on another pc.
Try another odin (older).
At least 50% battery?
Try another firmware.
Try to flash twrp, and one of the custom roms with twrp.
I've tried most of the things you said , and tried few different rom versions , check the video i've recorded . This happens if i only flash CSC ,BL ,CP files without AP , but when i try to flash AP it gets stuck on system.img forever... https://www.youtube.com/watch?v=06MyTL7vkkw. I've tried with twrp now , it says on the phone '' custom binary blocked my FRP lock
pearland12 said:
I've tried most of the things you said , and tried few different rom versions , check the video i've recorded . This happens if i only flash CSC ,BL ,CP files without AP , but when i try to flash AP it gets stuck on system.img forever... https://www.youtube.com/watch?v=06MyTL7vkkw. I've tried with twrp now , it says on the phone '' custom binary blocked my FRP lock
Click to expand...
Click to collapse
Have you tried samsung switch and others? Maybe a marshmallow rom?
---------- Post added at 03:49 PM ---------- Previous post was at 03:47 PM ----------
pearland12 said:
I've tried most of the things you said , and tried few different rom versions , check the video i've recorded . This happens if i only flash CSC ,BL ,CP files without AP , but when i try to flash AP it gets stuck on system.img forever... https://www.youtube.com/watch?v=06MyTL7vkkw. I've tried with twrp now , it says on the phone '' custom binary blocked my FRP lock
Click to expand...
Click to collapse
Maybe this https://drfone.wondershare.com/factory-reset-protection/solve-custom-binary-blocked.html
Or try a marshmallow rom. Have you stock recovery? If doesnt try to flash and boot into it.
6.0.1 rom gives me some strange errors that wont even make odin start installing it , i dont know what recovery i got , i cant get into it ( by holding power up , home , and power key ) , i cant even power off the phone ... dont know how ...Flashing stock recovery gives me error " kernel rev check fail , device 1 - binary 0 ''
pearland12 said:
6.0.1 rom gives me some strange errors that wont even make odin start installing it , i dont know what recovery i got , i cant get into it ( by holding power up , home , and power key ) , i cant even power off the phone ... dont know how ...Flashing stock recovery gives me error " kernel rev check fail , device 1 - binary 0 ''
Click to expand...
Click to collapse
Search updato.com for latest INS (Indian) firmware for your device. Aim to get ROM ending with QI5
moozer said:
Search updato.com for latest INS (Indian) firmware for your device. Aim to get ROM ending with QI5
Click to expand...
Click to collapse
Why Indian?
moozer said:
Search updato.com for latest INS (Indian) firmware for your device. Aim to get ROM ending with QI5
Click to expand...
Click to collapse
Sure , ill give it a try. How do you know for that file ? It worked for you ?
fromhungarytolnacounty said:
Why Indian?
Click to expand...
Click to collapse
It has more features than other offerings (stickers on camera). May as well!
---------- Post added at 12:53 AM ---------- Previous post was at 12:52 AM ----------
pearland12 said:
Sure , ill give it a try. How do you know for that file ? It worked for you ?
Click to expand...
Click to collapse
I searched and this version came up as possible last one before the security lockdown
moozer said:
It has more features than other offerings (stickers on camera). May as well!
---------- Post added at 12:53 AM ---------- Previous post was at 12:52 AM ----------
I searched and this version came up as possible last one before the security lockdown
Click to expand...
Click to collapse
You think that security is the problem of stucking odin at the system.img ? Im starting to suspect that my phone's memory is simply broken
Update: I tried with the indian version you recommended , same thing happens. Odin freezes at system.img file...
pearland12 said:
You think that security is the problem of stucking odin at the system.img ? Im starting to suspect that my phone's memory is simply broken
Click to expand...
Click to collapse
You can only try bro
Looks like incorrect firmware for the devices' region to me.
You need to post a screen shot of ODIN too.
What is the reason for flashing stock firmware?
pearland12 said:
You think that security is the problem of stucking odin at the system.img ? Im starting to suspect that my phone's memory is simply broken
Update: I tried with the indian version you recommended , same thing happens. Odin freezes at system.img file...
Click to expand...
Click to collapse
What is your model name ? A510x? What is the x?
pearland12 said:
You think that security is the problem of stucking odin at the system.img ? Im starting to suspect that my phone's memory is simply broken
Update: I tried with the indian version you recommended , same thing happens. Odin freezes at system.img file...
Click to expand...
Click to collapse
Did you try on another pc?
I've tried few different rom versions - indian , poland, german, etc. Model name is A520F I tried it on another pc and it freezes at exactly same spot . simce im not home right now ill post a camera photo of odin , im really lazy to do it all over again ...
pearland12 said:
I've tried few different rom versions - indian , poland, german, etc. Model name is A520F I tried it on another pc and it freezes at exactly same spot . simce im not home right now ill post a camera photo of odin , im really lazy to do it all over again ...
Click to expand...
Click to collapse
Is your USB debuggig on from developer options?
zoya4u said:
Is your USB debuggig on from developer options?
Click to expand...
Click to collapse
???
At the moment im compltetely stuck either on odin - system.img , or if i dont flash the system file (Ap) and flash 3 other files i get to bootloop forever , cant get to recovery or safe mode because i cant even power off the phone . Im running out of idea what to try.
Smart switch gets stuck at 6%, same part as odin. Samsung kies cant even detect the device
pearland12 said:
At the moment im compltetely stuck either on odin - system.img , or if i dont flash the system file (Ap) and flash 3 other files i get to bootloop forever , cant get to recovery or safe mode because i cant even power off the phone . Im running out of idea what to try.
Smart switch gets stuck at 6%, same part as odin. Samsung kies cant even detect the device
Click to expand...
Click to collapse
Google ADB
zoya4u said:
Google ADB
Click to expand...
Click to collapse
Can you eexplain what am i supposed to do ? Any help is highly appriciated