Develop Bugs

[UNOFFICIAL] LineageOS 15.1

Introduction:
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* I have not tested every single stuff in the ROM, stuff can and will be broken
* Whatever I know is broken is mentioned below, don't blame me if something dosen't work
*/
Bugs:
OTG
Offline charging
Selinux permissive
Requirements:
TWRP 3.2.x or higher
Instructions:
Download the build
Reboot to recovery
Flash the latest build
Flash latest gapps
Reboot
Downloads:
ROM
Gapps
The Kernel:
I think that a part for this is needed. This Kernel, that took us months of work, is a project by me and @faizauthar12 that aims porting the z2 kernel the nearest possible to the CAF kernel without any useless edit from ZUK itself. Because of that lots of ZUK edits aren't there at all in this kernel and the dtsi are done more ordinately.
Kernel source code
Credits:
LineageOS Team
@davidevinavil, we worked together during the whole Oreo bringup and we still are as a team
@faizauthar12 for the kernel collaboration
@varotone and cosme for their very good LOS 14.1 devices
All the other contributors
Source code:
ROM sources
Common device tree
Vendor tree
XDA:DevDB Information
LineageOS 15.1, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
DD3Boh, davidevinavil, varotone, Faiz Authar and everyone else who contributed to the device tree and kernel
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: AOSP
Version Information
Status: Beta
Created 2018-01-01
Last Updated 2018-01-01

Reserved

It's here.. Finally - Lineage 15.x
HDR+ from GcamMod and Deepsleep is perfectly working here. Good work, Davide Garberi
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Waiting for this from so long. Thanks everyone.

nice

Awesome!

very nice:good:

Yuhuuuu
It's here!!
It's here everyone
Lineageos !!!

How to enable navbar?

DivyanshuJ said:
How to enable navbar?
Click to expand...
Click to collapse
The following should work.
Add the below line to build.prop and reboot
qemu.hw.mainkeys=0

greatcoder said:
The following should work.
Add the below line to build.prop and reboot
qemu.hw.mainkeys=0
Click to expand...
Click to collapse
It worked.

very nice

Finally.. my fav lineage os is here.. awesome.. hope it gets continuous support.. best new year gift..
Any screenshots?

SteelBodyX said:
Finally.. my fav lineage os is here.. awesome.. hope it gets continuous support.. best new year gift..
Any screenshots?
Click to expand...
Click to collapse
here

Wow, had Lineage on my S5mini an was happy. Thanks for giving it to us.
Questions:
Does that ROM also has U-Touch configuration?
Does it wake up on HOME button press? Can I disable wake on button press?

HEllo! I'm coming from AOSP V5 but i can't install this ROM, it gives me error during the installation on TWRP 3.1

alain_aibu said:
HEllo! I'm coming from AOSP V5 but i can't install this ROM, it gives me error during the installation on TWRP 3.1
Click to expand...
Click to collapse
Update TWRP to latest 3.2.1

Are the text too tiny or is it due to Dpi settings?

Great work! ?
---------- Post added at 07:58 PM ---------- Previous post was at 07:58 PM ----------
SteelBodyX said:
Are the text too tiny or is it due to Dpi settings?
Click to expand...
Click to collapse
DPI settings

Good rom but lineage settings are absent/ not working. For IE, when I search for lockscreen torch, I fin the setting but got FC when clicking on it. I also have some FC with magisk 15.
Well, I go back on AEX 5.1 till it gets more stable.

[BOOT A/B GSIs] [UNOFFICIAL] LineageOS 16.0 A-only system-as-root

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Bugs :
None
Instructions :
Download the latest build, system-as-root recovery and gapps
Reboot to recovery
Flash TWRP-3.3.0-z2_plus-SAR-signed.img
Flash the latest build, (magisk) and gapps
Reboot
Downloads :
TWRP, Lineage system-as-root and Permissiver_v3 (for GSIs): here
Gapps : OpenGapps
Notes :
Using this build you'll be able to boot A/B system images on our z2_plus (A-only device)
Only Clean Installation Please
Bug Report Without logs means nothing
This build is mainly for GSIs flashing, it won't be updated very frequently. For anything else use the official build here
Do not report here in case any GSI doesn't boot, but report it to the ROM author
On this build you'll only be able to flash A/B system images, A-only ones won't work
To go back to a non system-as-root ROM you just need to flash the official TWRP and do a clean installation of a normal A-only build
Check https://source.android.com/devices/bootloader/system-as-root for a proper system-as-root documentation
Reporting Bugs :
DO NOT Report bugs if you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Sources :
Device tree (common): https://github.com/zuk-devs/android_device_zuk_msm8996-common/tree/staging/system-as-root
Device tree (z2_plus): https://github.com/zuk-devs/android_device_zuk_z2_plus/tree/staging/system-as-root
Kernel : https://github.com/DD3Boh/android_kernel_zuk_msm8996/tree/staging/system-as-root
TWRP device tree: https://github.com/DD3Boh/twrp_device_zuk_z2_plus/tree/android-9.0-sar
In case you want to build with system-as-root, make sure to pick this
If you appreciate my work on Z2 and my effort to keep this device active and alive you can donate to me via paypal here
XDA:DevDB Information
A-only system-as-root, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
DD3Boh, davidevinavil, kubersharma, kenny3fcb, YaroST12
Source Code: [url]https://github.com/LineageOS/[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: ZUI 3.5 bootloader
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-05-05
Created 2019-05-05
Last Updated 2019-05-05

Reserved

Reserved
List of GSI's:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Erfanoabdi's semi/GSIs (includes Android Q, Android P ports from Google Pixel Devices etc:
https://mirrors.lolinet.com/firmware/gsi/
Note: Use only A/B System Images with above system-as-root enabled LineageOS build
If you face issues flashing GApps on a GSI (which doesn't include GApps by default ofcourse) try the following steps
* After Flashing System Image *
-> Backup System Image
-> Wipe System, Data
-> Restore System Image
-> Flash GApps
-> Reboot
What works?
Everything in the above build, but it might differ in Generic System Image for example: VoLTE might be broken and pushing ims.apk in the system might fix it but not necessarily. Default Camera app can be unstable using third party camera can be a good option.
Tested GSIs:
* Erfanoabdi's Pixel Android Q dp2 - A/B slot image
* Erfanoabdi's Generic Android Q dp2 - A/B slot image

I'll take one as well..
Reserved..

Reserved

why everyone doing reserved??
i want to join u guys!

Lol
Our reserved was to add something important later if needed.

Deleted ...

Reserved

kubersharma said:
Lol
Our reserved was to add something important later if needed.
Click to expand...
Click to collapse
Nice picture :highfive:

New Lineage and TWRP builds for system as root synced to upstream.
Enjoy

Okay, This is something interesting!

DD3Boh said:
New Lineage and TWRP builds for system as root synced to upstream.
Enjoy
Click to expand...
Click to collapse
Thanks for your continued support for our device.

Yes, could someone please tell what's the difference between this one and the official lineage is 16?

Nice work. In theory, would it be possible to flash the latest Android Q Beta 5 official GSI using this?
https://developer.android.com/preview/gsi-release-notes#downloads
Here's a guide from XDA that explains the process:
https://www.xda-developers.com/install-android-q-beta-gsi-project-treble/

P650SE said:
Nice work. In theory, would it be possible to flash the latest Android Q Beta 5 official GSI using this?
https://developer.android.com/preview/gsi-release-notes#downloads
Here's a guide from XDA that explains the process:
https://www.xda-developers.com/install-android-q-beta-gsi-project-treble/
Click to expand...
Click to collapse
Well I didn't get a response to this so I decided to try it for myself. Turns out that the official Android Q Beta 5 GSI provided by Google (on the Android website) boots fine on Z2 Plus. However, during the setup process at the point where it asks 'Choose screen lock', the page is empty (just white space) and thus it is not possible to continue from here.
So instead I will try reverting back to stock TWRP and flashing the A-only build of Android Q Beta 5 by Erfanoabdi.

[ROM]UNOFFICIAL[EOL[10] LINEAGEOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
https://www.los-legacy.de/​
LineageOS is based on the Android Open Source project with additional contributions from many people within the Android community.
It can be used without the need to have a Google application installed.
LineageOS still contains various hardware-specific code that is slowly becoming open source anyway.
Your changelog is what was merged into Gerrit.
All the source code for LineageOS is available in LineageOS.Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Known problems:
Android Auto (not tested)
tell me
!!! OTA update is set up !!!!
Updates can be downloaded and installed on your mobile phone via lineageos_updates.
If it is not possible to install the update automatically, or if you want to install it manually, please proceed as follows,
(Selects in two steps) install/select memory/internal memory/parent folder/data/lineageos_Updates.
selects the build and installs it and everything else you want to install, then restarts.
Initial installation:
Before you begin, save
Remove the PIN protection and then restart for TWRP recovery.
Erase data under Advanced (do not format data - this will erase the internal memory)
Delete system and cache under Advanced
Flash required firmware
Flash ROM + Gapps or nanodroid
Optional - Flash supported root
Optional -xXx-No-Verity-Treble_v4.zip ONLY if it should be decrypted
Restart
Update installation:
Before you start, save
Restart for TWRP resume
Required Flash firmware, if a new one is available
Flash ROM
Optional - xXx-No-Verity-Treble_v4.zip ONLY if it should be decrypted
Restart
Downolads:
Twrp:
Twrp
TWRP by codeworkx
Firmware:
Firmware OP5
Firmware OP5/T
Magisk:
Magisk-v20.xx.zip
Magisk Canary Channel - Bleeding Edge Builds
No Verity:
XxX No Verity v4.0
Gapps:
Gapps arm64 pico or nano
Only for non gapps users
NanoDroid Magisk module
Reporting Bugs :
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
XDA:DevDB Information
[ROM]UNOFFICIAL[EOL[10] LINEAGEOS 17.1, ROM for the OnePlus 5
Contributors
Exodusnick
Source Code: https://github.com/LineageOS/android_kernel_oneplus_msm8998
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 26.03.2020
Created 2020-03-27
Last Updated 2020-10-21

Screenshots

Reserve

Added to the OnePlus 5 Index Thread here.

Hi ,
what firmware do I have to flash before flashing the rom?

firmware_H053_oneplus5.zip

is it necessary to install gapps in this rom? and which one is it ?

If you don't need gapps you can install without
Or nanodroid
It's all in the op thread.

i will maybe building for the op5 T, but it will be a blind build, as i do not own the device .

Exodusnick said:
i will maybe building for the op5 T, but it will be a blind build, as i do not own the device .
Click to expand...
Click to collapse
Many builds for OP5T are blind, if there are many people testing and reporting bugs it is managable, don't know about this community's size

I do not practice the community?
It was just an info from me......

Exodusnick said:
Screenshots
Click to expand...
Click to collapse
Is this a theme ?
Or is this the default lineageOS theme ?

Added to channel on TG here: [Mod edit] link removed

So this rom is build using crDroid sources
Device tree & kernel
??

zaibansari20 said:
So this rom is build using crDroid sources
Device tree & kernel
??
Click to expand...
Click to collapse
https://github.com/los-legacy/android_device_oneplus_msm8998-common
https://github.com/los-legacy/cheeseburger
https://github.com/los-legacy/local_manifests

-why do you propose the update today if I already have today's build?
-Dash charge not work
- see image
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk

eNVy said:
Is this a theme ?
Or is this the default lineageOS theme ?
Click to expand...
Click to collapse
Is default lineageOS theme.

zaibansari20 said:
So this rom is build using crDroid sources
Device tree & kernel
??
Click to expand...
Click to collapse
Yes the sources are of crdroid.
But I build lineagos and there is nothing of crdroid in them. Unless the kernel is from crdroid

New update is available
Changelog
- Synced with lineageos sources
- Fix lineageos update app changelog
Download link
https://www.los-legacy.de/17.1/cheeseburger

op updated
-thread name changed
-added Onplus 5T Rom
-added Firmware Onplus 5T

[EOL][ROM][12L][AURORA][OFFICIAL] LineageOS 19.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 12.x (S),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : https://lineageos.org/
About LineageOS Legal : https://lineageos.org/legal/
Important Information
1. This ROM will never work with any versions of Google Camera (GCam)!
2. You need to flash Stock Android 10 before flashing this ROM.
Downloads Links
LineageOS 19.1:
Official builds: Link
Google Applications (optional):
MindTheGapps: https://wiki.lineageos.org/gapps
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
Please refer to the official installation guide at https://wiki.lineageos.org/devices/aurora
Issues and reports
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Share a log of the error with Logcat for example
Also thanks to:
Olivier
Sjll
The LineageOS Team
The CyanogenMod Team
Everyone involved in working and testing
XDAevDB Information
Lineage 19.1 for Xperia XZ2 Premium, ROM for the Xperia XZ2 Premium
Contributors
dtrunk90
Source Code: https://github.com/LineageOS
Donation
https://paypal.me/dtrunk90
ROM OS Version: Android 12L
ROM Kernel: Linux 4.9
ROM Firmware Required: Official Android 10.0 firmware
Based On: LineageOS
Version Information
Status: Stable
Created 2022-05-05
Last Updated 2022-06-23

Reserved

dtrunk90 said:
Click to expand...
Click to collapse
Great, thank You! I tried to install camera-0.3.0-tama. Same behaviour as before...
My problem:
I want
-to use a modern OS with actual service
-to work with banking apps (s-pushtan)
-to make pictures with the original Sony camera app
Camera is only working in conjunction with magisk and safetynet-fix
The banking app doesn´t like magisk&Co
I do not find a solutrion to hide magisk,zygisk, su, custom ROM, lsposed, hide_props, hide_my_app_list and so on...
@dtrunk90 do you see any solution (for example integrate the camera app into LOS)?

very nice

der.lange said:
Great, thank You! I tried to install camera-0.3.0-tama. Same behaviour as before...
My problem:
I want
-to use a modern OS with actual service
-to work with banking apps (s-pushtan)
-to make pictures with the original Sony camera app
Camera is only working in conjunction with magisk and safetynet-fix
The banking app doesn´t like magisk&Co
I do not find a solutrion to hide magisk,zygisk, su, custom ROM, lsposed, hide_props, hide_my_app_list and so on...
@dtrunk90 do you see any solution (for example integrate the camera app into LOS)?
Click to expand...
Click to collapse
Sorry for the late response. I don't think this app should be included into the rom. There's still a crash with slow motion and even if I fix that i would have to ask the lineage devs if it's allowed. In my opinion camera2 covers most needs pretty good.

Official builds are now available!
In order to switch from unofficial to official builds a clean flash is required. Please refer to the official installation guide on how to clean flash properly.
In order to upgrade from official 18.1 to 19.1 please update recovery first (see https://wiki.lineageos.org/devices/...rily-booting-a-custom-recovery-using-fastboot) and then follow this guide: https://wiki.lineageos.org/devices/aurora/upgrade

good

This ROM is now EOL. Last official build can be downloaded here in case someone wants to after 19.1 builds aren't available on the Lineage website anymore.

[OFFICIAL] [12.1] LineageOS 19.1 [z2_plus]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Bugs :
You tell me
Instructions :
Download the latest build
Reboot to recovery
Flash the latest build
Reboot
Downloads :
ROM : LineageOS
Gapps: MindTheGapps
Notes :
Only Clean Installation Please
Bug Report Without logs means nothing
Reporting Bugs :
DO NOT Report bugs if you installed Xposed or weird magisk modules
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Sources :
Device tree (common): here
Device tree (z2_plus): here
Kernel : here

Reserved

Thank you very much!

@DD3Boh Thanks a ton for Lineage 19.1 for Zuk z2 plus. Sir, any specific reason why Zuk Z2 Plus is yet to get a Lineage 19.1 official build? Thanks and as always appreciate your efforts.

When to put up the official website

The first 19.1 official build is finally out!
You can find the download link in the first post
Enjoy

@DD3Boh Already downloaded it from lineage OS site when it appeared there. Keep up the good work. Thank you.

guys, is miracast working for you?

Tried this build and it doesn't detect my 2nd sim card.

Does encryption work well for you?I got a blackscreen and reboot when I draw pattern to start Android.

Just did a clean install, button page in Settings does NOT work

build20220901
button setting does not work

The fix for button settings has just been pushed on Lineage's github, so that will be fixed in the next nightly
Sorry for the issue

Guys is this rom good for daily drive

i am trying to upgrade from pixysOS 2.4 android 9 rom to this lineage 19.1 rom
but after patching system unconditionally it ended with unable to mount /vendor error
plz tell me what to do

Ankit5228 said:
i am trying to upgrade from pixysOS 2.4 android 9 rom to this lineage 19.1 rom
but after patching system unconditionally it ended with unable to mount /vendor error
plz tell me what to do
Click to expand...
Click to collapse
Try different twrp, vendor sometimes don't need to be wiped. I had that issue before due to treble twrp version I used check for that.

Thanks for the official support for Android 12, but for now it looks too raw in comparison with LOS 11.
1) The animations and overall system speed are much slowlier than it was in LOS11.
2) On the home screen there is a reserved space for navigation buttons, I can't hide it, navigation buttons are turned off in the settings. And there are some extra space from the right side of the battery icon.

LineageOS 19.1 custom rom Google camera and stock camera focus problem please fix this problem.

Atanu Chakra Borty said:
LineageOS 19.1 custom rom Google camera and stock camera focus problem please fix this problem.
Click to expand...
Click to collapse
For me it's crashing the device when I use google camera version 8.4, 8.5. Now am using google playstore gcam version old one and it works.