hi
i flashed stock rom on my mi a2 lite and it was perfect but after 1 week the notifications does not work and it seems phone is on silent !!!
but after factory reset it works good again
nothing ?!?
If something gets working after a reset and stop working while you use the device, it means it your fault and maybe an app is interfering with profiles/notifications.
Related
hello i'm mi 5s 4gb/128gb user
yesterday, i was using cyanogenmod 13 but i want to use miui again
so i restored nendroid backup from twrp recovery
that was start of diaster..
after this. fingerprint scanner mostly doesn't work
sometimes fingerprint scanner work correctly after reboot, it doesn't work.. and sometimes... it works...
i did many many method (global rom, china rom via edl mode, fastboot mode) but everything has same result,
so i looked at my logcat
it says
QFP : QfpThreadMatch::execute: match result -3: QFP_INSUFFICIENT_COVERAGE
with my finger or not logcat said same result
why my fingerprint scanner doesn't work?
is it hardware issue?
sorry for poor english
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
jlmcr87 said:
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
Click to expand...
Click to collapse
???
Maybe placebo effect but people are saying Global rom had improved fingertip detection rate.
If i were you, i would flash as stock as possible, recovery, bootloader, lock status, everything, just to determine software versus hardware failure.
Hope for the best, as this kind of life cycle premature failure freak me out, first stucked autofocus sensor now this!!!
jpg3927 said:
???
Click to expand...
Click to collapse
You change the software and then ask if it´s hardware?
jlmcr87 said:
You change the software and then ask if it´s hardware?
Click to expand...
Click to collapse
yes it's strange
jpg3927 said:
yes it's strange
Click to expand...
Click to collapse
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
EpicSauce said:
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
Click to expand...
Click to collapse
i solved it
i think this was problem of driver
so i needed rollback of driver
first. i flashed 6.10.13 eu rom over 6.12.29
it occurs bootloop
second. i flashed 6.12.29 over 6.10.13 again. and fingerprint works like charm again!
Exists the cyanogenmod for Mi5s?
Still very buggy. We have to wait for xiaomi to release the source code to get nice CM .
The fingerprint happened to me too, it just stopped working.
Flash the stable global using fastboot, it will erase everything, and will be great again.
Don't restore with Titanium backup, I had all kind of weird problems everytime I tried.
One of the worst fp sensors ever. I tried all the tricks mentioned in several places, detection rate stays very low.
Sent from my MI 5s using Tapatalk
LucaOwner said:
Exists the cyanogenmod for Mi5s?
Click to expand...
Click to collapse
Linage os
As state at the title, is there any rom that have run both camera? I know GCam is better, just it feel weird buying smartphone that got 2 camera at back and not using it.
I have a GCam port and Mi A2 port installed and working on RR!
I don't think that it is a matter of rom. By the way, I'm using masik 2.5 and I'm using both mi and google camera.
i am using both on i guess any rom, dunno where the problem is.
just flash rom, reboot, make your setup, flash mi cam port, reboot, start, sometimes not working after first boot, but works on second boot, then install gcam. isi going. never had any issues using them both
Got it, thanks alot guys
(I am not a developer who created the below files, i am just a crazy boy who always install many stuffs for making phone more interesting, so credit for making the below files goes to the developers who created it, i just discovered the method by which stock camera will work on pie roms)
Hey Guys, I am visiting Many posts on xda for stock camera for mi a1 but still i found nothing which will work.. but now after Many tries i found on method which works for me..
So download the files given in below link
https://drive.google.com/folderview?id=1Ops1ScNLjtyPRy8k8nLhc0UhcDY-LfzP
Requirements:- Rooted Mi A1 (This method may also work in other phones but i had mi a1 so, i only tested in it) and also i tested in hovoc os , it may work in other roms too
Whats working
Almost all things working except slow motion
Installation process
1) Download All files in your phone.
2) Install Mi_A2_Camera_app_port-v3.zip ( In magisk) and reboot the phone.
3) then After reboot, now Install tissot-stock-camhal_v2.zip ( In magisk) and then reboot the phone.
4) After reboot, open camera and it will ask for permissions or u can give permissions from settings too. ( Portrait mode will still not work)
5) Now install Selinux changer app and set it to permissive and reboot the phone, now check the portrait mode if it is lagging then uninstall selinix changer app and reboot again, thats it
This method may not work for all but its works for me running with hovoc os.. so try it may work for u guys too, if it is working then hit thanks and sorry for my bad English
(I am not a developer who created the below files, i am just a crazy boy who always install many stuffs for making phone more interesting, so credit for making the below files goes to the developers who created it, i just discovered the method by which stock camera will work on pie roms)
No guarantee, it will work but u must try it.. its works for me
I m just tired to type this post so i copy pasted from my Mi A2 camera thread:laugh:
Hey Guys, I am visiting Many posts on xda for stock camera for mi a1 but still i found nothing which will work.. but now after Many tries i found on method which works for me..
So download the files given in below link
https://drive.google.com/folderview?id=1ZlSDutHYC83DMbNPPtUjSl7DaoNnn9dC
Requirements
Rooted Mi A1 with Magisk
(I have only tested in Hovoc os, this methed may works in other roms too..)
Whats working
Almost all things working except slow motion
Installation process
1) Install tissot-stock-camhal_v2.zip in Magisk and reboot the phone.
2) Install sulinux changer app and set it to permissive.
3) Now install the miui camera app Normally.. after installation reboot the phone
4) check the portrait mode, if it is lagging then uninstall sulinux changer app and reboot for final time, thats it Mi A1 camera will works fine now:fingers-crossed:
This method may not work for all but its works for me running with hovoc os.. so try it may work for u guys too, if it is working then hit thanks and sorry for my bad English
Hello,
I would like to ask a question about a subject that I have been dealing with for weeks.
I have been using Eu beta rom on all my Xiaomi devices for many years. And now i'm using Poco F3 with EU Beta (lastest)..
About 1 month ago, I bought myself a car with Android Auto support. Eu rom is working fine except 1 issue on car screen. There are several programs on the multimedia device that can be used to play the screen of the mobile phone and/or the files on the connected mobile phone. The most famous and beautiful employee (youtube and web browser supports) is a program called FERMATA Auto . When installing this FERMATA Auto on the phone, it is necessary to install a tool with the installer program so that it does not get stuck in google blocks. However, although I have done all these correctly, FERMATA Auto does not appear on the vehicle screen while it is working properly on the phone. Other programs that do similar tasks don't work either. Although I tried dozens of times, I couldn't run it, and when I installed and tried this FERMATA on another xiaomi device, it worked on my first try. So I tried switching from eu beta to eu stable to see if the problem is with my device or the rom, but it still didn't work. When I installed Pixel expirence and tried it on the same day, it worked again on my first try. I think there is something in the rom that is preventing this. Especially because of call recording and continuous support, I don't plan to switch to another rom other than EU rom.
Anyone have any ideas on this?
FARMATA, FATMATA, FERMATA… which one is it?
Yes, same issue with stock miui and Android auto
kurtschmeichel said:
FARMATA, FATMATA, FERMATA… which one is it?
Click to expand...
Click to collapse
So sorry. I correct it. So it's FERMATA Auto
amarprat87 said:
Yes, same issue with stock miui and Android auto
Click to expand...
Click to collapse
I try with my friend Poco X3 with stock rom and it was working with my car. Also Pixel rom is working with my Poco F3 and my car. :-o