Related
Mine motog5s updated to stock fw and root uninstalled after it it hangs on boot screen. I flashed stock fw again with fastboot but after restart mobile didn't display anything not even vibrate just blinking notification when connect usb wire . how to unbrick only shows qualcomm hs dloader 9008 what to do, pls. reply.
You cannot log into fastboot mode?
qualcomm hs dloader 9008 = EDL mode, you should be able to restore with QFIL: https://forums.lenovo.com/t5/MOTO-E-1st-Gen/Moto-E-Not-Boot-Up/td-p/3231144 but it looks like motorola doesn't provide the files ... most likely you'll need a service center
Do not use QFIL. To unbrick, we need the blankflash file for G5S. And it is not on the Internet yet. Do not use the blankflash of any other models. Your best bet is to take the phone to a service center.
---------- Post added at 11:46 AM ---------- Previous post was at 11:46 AM ----------
Did you try holding the power down button and turning on the phone to enter bootloader?
Thanks for the reply the service center guys sayin as bootloader is unlocked out of warranty. They said mobile is rooted without checking the mobile as its not turning on, how they can say that its rooted . They just talking on phone with other persons but cant provide any solution what can be done.
Please provide any other solution.
ASHDCBZ said:
Thanks for the reply the service center guys sayin as bootloader is unlocked out of warranty. They said mobile is rooted without checking the mobile as its not turning on, how they can say that its rooted . They just talking on phone with other persons but cant provide any solution what can be done.
Please provide any other solution.
Click to expand...
Click to collapse
You downloaded the unlock key from Moto website by giving them your device serial number. That's how they know you unlocked bootloader. Service center won't help you. But fortunately, there is a way to revive your phone. But I'm not getting the blankflash file anywhere.
Tell me what exactly did you do to your phone.
Thank you,
Ok I just flahsed & tried stock roms, root & custom roms. Then I flashed stock rom of mine region firmware npp26.102.19 then motorola gave the updates to npp26.102.55-1 Dec. patch. Then next day new update came Feb patch npp26.102.55-4 just after it mobile started hanging & when restart it stuck on boot, not booting just stuck on boot animation. I tried TWRP recovery it said encrypted then I entered the unlock pin then it shows all the folders. Then I again fastboot npp26.102.19 to solve the issue but after flashing & restart it did not boot nor screen on no vibration tried several times but no response, when connect with pc or charger a white notification light blinking only & it detected as QHUSB_BULK something like that then I searched for it & install driver then shows as qualcomm dloader 9008.
Ok you should never flash an older bootloader over never one. It's a classic mistake that you made. I suppose we need the blankflash file to repair your phone. Let's wait to see what senior devs say.
ShattrdChain said:
Ok you should never flash an older bootloader over never one. It's a classic mistake that you made. I suppose we need the blankflash file to repair your phone. Let's wait to see what senior devs say.
Click to expand...
Click to collapse
Hmmmmmmmm
Please provide blankflash soon file I'll try.
there is no notification light on my g5s. what is blinking on yours?
Andrew Joseph said:
there is no notification light on my g5s. what is blinking on yours?
Click to expand...
Click to collapse
Next to front flash right side a white light is blinking. Try pressing power button then it will show.
nope. can't find it. the g5s plus has a 'secret' notification light. can't find anything about the g5s having the same.
what phone do you have?
Andrew Joseph said:
nope. can't find it. the g5s plus has a 'secret' notification light. can't find anything about the g5s having the same.
what phone do you have?
Click to expand...
Click to collapse
Its Moto G5s XT1795.
when you connect your device with PC what driver it shows fastboot, ADB or mtp or else QHUSB_BULK qualcomm dloader 9008.
does this only happen when you root your phone?
Can someone Help Us?
Hey, i have unlock the bootloader of my phone and flash the updated rom in my device. After that my phone is just off, i press the power button but it don't turn on, connect do pc or chargers but it not turn on, that is the hard brick, can i have a solution to this?
I have this:
"The Hardbrick tutorial you always craved for
Let's get some things straight
Forget flashing stock firmware anymore this makes permanent changes to your phone's firmware but this is the only thing that will resurrect the fallen lad
Requirements
Albus blankflash
Qualcomm drivers
Adb and fastboot
Bootloader from Albus
Steps
Get the Qualcomm drivers installed… make sure you disable Driver Signature Enforcement for your windows version
Run the script in albus blankflash to get into a dummy bootloader
Now flash bootloader and partition files and recovery from addison2potter.zip
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash recovery recovery.img
Now try flashing a stock firmware it will flash but you will not be able to boot right now
Now flash or boot TWRP recovery
fastboot flash recovery TWRP.img
fastboot boot TWRP.img
Now flash the debloated stock ROM or the TWRP Flashable stock build by Gtrcraft
(This is needed to get RIL back )
You should be able to boot into the stock ROM now
Now you can go back to TWRP and flash any ROM of your choice ".
But i don't know if it will work, because i don't know if this files can match my model: moto g5s xt1792
And sorry but i can't post links yet.
Please Help Us.
brunovsc said:
Hey, i have unlock the bootloader of my phone and flash the updated rom in my device. After that my phone is just off, i press the power button but it don't turn on, connect do pc or chargers but it not turn on, that is the hard brick, can i have a solution to this?
I have this:
"The Hardbrick tutorial you always craved for
Let's get some things straight
Forget flashing stock firmware anymore this makes permanent changes to your phone's firmware but this is the only thing that will resurrect the fallen lad
Requirements
Albus blankflash
Qualcomm drivers
Adb and fastboot
Bootloader from Albus
Steps
Get the Qualcomm drivers installed… make sure you disable Driver Signature Enforcement for your windows version
Run the script in albus blankflash to get into a dummy bootloader
Now flash bootloader and partition files and recovery from addison2potter.zip
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash recovery recovery.img
Now try flashing a stock firmware it will flash but you will not be able to boot right now
Now flash or boot TWRP recovery
fastboot flash recovery TWRP.img
fastboot boot TWRP.img
Now flash the debloated stock ROM or the TWRP Flashable stock build by Gtrcraft
(This is needed to get RIL back )
You should be able to boot into the stock ROM now
Now you can go back to TWRP and flash any ROM of your choice ".
But i don't know if it will work, because i don't know if this files can match my model: moto g5s xt1792
And sorry but i can't post links yet.
Please Help Us.
Click to expand...
Click to collapse
Yes tried this & other blank flash it show only this-----
Failed identify board. Wrong package?
ERROR: error loading package
FAILED: qb_flash_singleimage()->error loading package
other tried this also----------
Found this can anyone try
https://www.droidsavvy.com/unbrick-qualcomm-mobiles/
qfil also not flashing sahara error.
I have tried this but there's an error
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
em QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
em QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
ASHDCBZ said:
Its Moto G5s XT1795.
when you connect your device with PC what driver it shows fastboot, ADB or mtp or else QHUSB_BULK qualcomm dloader 9008.
Click to expand...
Click to collapse
i haven't tried to root or connect via adb or anything else. my phone is just plain stock from factory.
brunovsc said:
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
em QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
em QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
Same error shows in Qfil.
Andrew Joseph said:
i haven't tried to root or connect via adb or anything else. my phone is just plain stock from factory.
Click to expand...
Click to collapse
So is it not switch on or displaying anything.
After trying to flash Pie my G7 stuck in fastboot mode. Download mode is unavailable so I not can reset the stock ROM.
After it reboots it boots into only to fastboot mode and is stuck in a loop now.
An even bigger problem is that now the bootloader is locked and the unlock.bin file can not unlock the bootloader.
ADB mode is not working!
DOWNLOAD mode is not working!
SYSTEM mod does not work!
There is only FASTBOOT mode that is in the loop
Does anyone have any suggestions?
Prosjak said:
After trying to flash Pie my G7 stuck in fastboot mode. Download mode is unavailable so I not can reset the stock ROM.
After it reboots it boots into only to fastboot mode and is stuck in a loop now.
An even bigger problem is that now the bootloader is locked and the unlock.bin file can not unlock the bootloader.
ADB mode is not working!
DOWNLOAD mode is not working!
SYSTEM mod does not work!
There is only FASTBOOT mode that is in the loop
Does anyone have any suggestions?
Click to expand...
Click to collapse
Try to get into lgup to flash a kdz, if you cant do that you might be SOL
LGUP does not detect phone, download mode is not working
hi
Prosjak said:
LGUP does not detect phone, download mode is not working
Click to expand...
Click to collapse
Please contact me, I can help you recover the device
PjLyTam said:
Please contact me, I can help you recover the device
Click to expand...
Click to collapse
How to contact you and how you can help me.
If you want to help write this here to help this benefit to anyone who has this or similar problem
Thank you
Prosjak said:
After trying to flash Pie my G7 stuck in fastboot mode. Download mode is unavailable so I not can reset the stock ROM.
After it reboots it boots into only to fastboot mode and is stuck in a loop now.
An even bigger problem is that now the bootloader is locked and the unlock.bin file can not unlock the bootloader.
ADB mode is not working!
DOWNLOAD mode is not working!
SYSTEM mod does not work!
There is only FASTBOOT mode that is in the loop
Does anyone have any suggestions?
Click to expand...
Click to collapse
Fastboot --set-active=a
LameMonster82 said:
Fastboot --set-active=a
Click to expand...
Click to collapse
Thank you for your reply
The problem is that the bootloader is locked
C:\ADB>Fastboot --set-active=a
Setting current slot to 'a'...
FAILED (remote: Slot Change is not allowed in Lock State)
finished. total time: 0.003s
Problem solved
Octoplus/Octopus LG 2.9.3
Reset FRP Lock
1. Attach testpoint, and connect phone with Micro USB cable (don´t use USB hubs!).
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn´t installed a driver.
3. Release testpoint and press "Reset FRP Lock" button.
Emergency mode
To enter emergency mode, disconnect cable, disconnect battery, press and hold "Vol+" button and connect USB cable.
My lucky day
What version of G7 use?
Sent from my LM-G710 using Tapatalk
PjLyTam said:
Please contact me, I can help you recover the device
Click to expand...
Click to collapse
i got this problem too.. please help with that
Prosjak said:
Octoplus/Octopus LG 2.9.3
Reset FRP Lock
1. Attach testpoint, and connect phone with Micro USB cable (don´t use USB hubs!).
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn´t installed a driver.
3. Release testpoint and press "Reset FRP Lock" button.
Emergency mode
To enter emergency mode, disconnect cable, disconnect battery, press and hold "Vol+" button and connect USB cable.
My lucky day
Click to expand...
Click to collapse
how i can do this?
My G710EM has a problem with my lockback BL. I can't boot the system and it will prompt "Your device has failed a routine safety check and will not boot. This may be a temporary problem. If this message occurs repeatedly, visit this link on Another device and refer to the red case:g.co/ABH Your device will power off automatically after a while.” With LGup brush kdz brush does not go in, fastboot “fastboot flash unlock unlock.bin” prompt is invalid
* Target reported max download size of 536870912 bytes
Sending 'unlock' (1 KB)...
OKAY [ 0.004s]
Writing 'unlock'...
FAILED (remote: Flashing Unlock is not allowed
)
Finished. total time: 0.011s
I don't know what to do.
I had the very same problem as OP. I tried to install pie with LGUP (G710EM20b_00_OPEN_EU_OP_0508.kdz) but ended in fastboot loop.
After whole night of trying different things (being a noob means less sleep) I managed to run the phone in download mode. Starting from there I was able to install my previous rom. Both failed update and rescue operations were done on Win 10.
What I tried and didn't work:
- Fastboot --set-active=a
Code:
C:\ADB>Fastboot --set-active=a
Setting current slot to 'a'...
FAILED (remote: Slot Change is not allowed in Lock State)
finished. total time: 0.003s
- Unlocking with unlock.bin. Didn't save the msg but saw it somewhere in another thread. I needed to install/point drivers first because the device was not recognized in Win.
- Solutions for G6 for going into download mode. The download mode icon was displayed for a second and then going to fastboot again.
- LG Flash Tool 2014 - I just followed a guide for older phones but it didn't work. Didn't try again.
What did work:
1. I found this post on reddit (remove spaces or PM me, I'm not allowed to post links):
Code:
https:// www .reddit. com/r/LGG3/comments/2qe5sr/in_need_of_serious_help_stuck_in_fastbootno/cn5f2qr/?utm_source=share&utm_medium=web2x
Quoting the post
At first, you'll need a working fastboot environment, you'll find out how to set it up on your own. Then you'll need the laf.img, I can upload mine if you want or I could help you extracting one out of a kdz file. Put the laf.img in the same folder like your fastboot.exe, then hold shift and right click, then click on "open command panel here" or however it's called in English. Type "fastboot flash laf laf.img" (Edit: It would probably better to use "fastboot boot laf.img" instead because of the bootloader lock). If that works, you at least have a working download mode.
Click to expand...
Click to collapse
2. I used LG_Firmware_Extract_v1.2.6.1 and extracted dz file from aforementioned pie file. The I extracted two laf files for the kz file. In my case they were: laf.img_180534 and laf.img_81990.
3. I took one of these files (sry, don't remember which one, but they have the same size - didn't check if they're the same) renamed it to laf.img and put a folder where fastboot.exe is.
4. I did
Code:
fastboot boot laf.img
and voila: the phone was in download mode!
5. After that LGUP the previous rom and the phone is working again. Here I needed few tries. At first the were some problems, then I tried different combinations (1.14, 1.15, w/ and w/o uppercut). I think LGUP 1.15 (1.14 with patch) did the work. I was able to "refurbish" the phone.
Hope it's useful for others. If anyone could prepare a guide from this description or/and tell why it worked - please feel free to do so.
I think I will wait some time before trying pie again
Garlikus said:
I had the very same problem as OP. I tried to install pie with LGUP (G710EM20b_00_OPEN_EU_OP_0508.kdz) but ended in fastboot loop.
After whole night of trying different things (being a noob means less sleep) I managed to run the phone in download mode. Starting from there I was able to install my previous rom. Both failed update and rescue operations were done on Win 10.
What I tried and didn't work:
- Fastboot --set-active=a
Code:
C:\ADB>Fastboot --set-active=a
Setting current slot to 'a'...
FAILED (remote: Slot Change is not allowed in Lock State)
finished. total time: 0.003s
- Unlocking with unlock.bin. Didn't save the msg but saw it somewhere in another thread. I needed to install/point drivers first because the device was not recognized in Win.
- Solutions for G6 for going into download mode. The download mode icon was displayed for a second and then going to fastboot again.
- LG Flash Tool 2014 - I just followed a guide for older phones but it didn't work. Didn't try again.
What did work:
1. I found this post on reddit (remove spaces or PM me, I'm not allowed to post links):
Code:
https:// www .reddit. com/r/LGG3/comments/2qe5sr/in_need_of_serious_help_stuck_in_fastbootno/cn5f2qr/?utm_source=share&utm_medium=web2x
Quoting the post
2. I used LG_Firmware_Extract_v1.2.6.1 and extracted dz file from aforementioned pie file. The I extracted two laf files for the kz file. In my case they were: laf.img_180534 and laf.img_81990.
3. I took one of these files (sry, don't remember which one, but they have the same size - didn't check if they're the same) renamed it to laf.img and put a folder where fastboot.exe is.
4. I did
Code:
fastboot boot laf.img
and voila: the phone was in download mode!
5. After that LGUP the previous rom and the phone is working again. Here I needed few tries. At first the were some problems, then I tried different combinations (1.14, 1.15, w/ and w/o uppercut). I think LGUP 1.15 (1.14 with patch) did the work. I was able to "refurbish" the phone.
Hope it's useful for others. If anyone could prepare a guide from this description or/and tell why it worked - please feel free to do so.
I think I will wait some time before trying pie again
Click to expand...
Click to collapse
Thanks for you guide.. I follow it but unfortunatly after "fastboot boot laf.img" I get this message from my LG:
"Your device has failed a routine safety check.... it will reboot after a while.."
davinik84 said:
Thanks for you guide.. I follow it but unfortunatly after "fastboot boot laf.img" I get this message from my LG:
"Your device has failed a routine safety check.... it will reboot after a while.."
Click to expand...
Click to collapse
I recall I also had some error msg, it could've been the same. Now I don't remember what I exactly did next as most my actions were more or less random. Either I tried the same command but with other laf.img file (from the rom I used before), or I tried to restart the phone into download mode (vol- and power together and then vol+ after screen goes black) or tried the same file again.
Hope it helps.
davinik84 said:
Thanks for you guide.. I follow it but unfortunatly after "fastboot boot laf.img" I get this message from my LG:
"Your device has failed a routine safety check.... it will reboot after a while.."
Click to expand...
Click to collapse
I have the same problem as well. I follow the guide but I received the same error message
domenico.dalpiaz said:
I have the same problem as well. I follow the guide but I received the same error message
Click to expand...
Click to collapse
Check if the phone is recognized in LG Bridge. If so, then choose update error recovery from software update tab. Again, I don't remember if it worked immediately or did I need to reinstall drivers and/or choose a proper driver in device manager (generic ADB vs LG...) and/or restart the phone.
domenico.dalpiaz said:
I have the same problem as well. I follow the guide but I received the same error message
Click to expand...
Click to collapse
I have same error too ...
DenisVelev said:
I have same error too ...
Click to expand...
Click to collapse
Based on other threads, e.g. https://forum.xda-developers.com/v20/how-to/restore-v20-to-100-stock-bricked-devices-t3524903 and https://www.reddit.com/r/lgg6/comments/axd17d/lg_g6_eu_glh870_bricked_after_update_your_device/
try:
install the LG Bridge updater software on a computer, go to updates, click the "correct update errors" button. Then plug in your turned-off phone while holding down the volume up button. It should switch to download mode and reinstall all software from the PC. Yes, this will erase all data but it should unbrick your phone (unless the hardware's broken I guess)
Click to expand...
Click to collapse
Garlikus said:
Based on other threads, e.g. https://forum.xda-developers.com/v20/how-to/restore-v20-to-100-stock-bricked-devices-t3524903 and https://www.reddit.com/r/lgg6/comments/axd17d/lg_g6_eu_glh870_bricked_after_update_your_device/
try:
Click to expand...
Click to collapse
Cannot put in download mode. Only Fastboot. For a secound show download mode after that show fastboot mode.
Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of what to do?
Tks!
riickseven said:
Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of what to do?
Tks!
Click to expand...
Click to collapse
Download Your Latest ota zip from
https://mirrors.lolinet.com/firmware/moto/channel/official/
then flash via rsd lite that will fix your phone and reset it
Help download
motorola/aljeter/aljeter:9/PPPS29.55-35-12-3/a0b9b:user/release-keys
So, a few months ago I rooted my device with twrp and then installed magisk manager... A few days later the manager stopped working and I got tired of not being able do do nothing so I tried to unroot. I used mi flash to flash the daisy rom and it didn't work so I tried to load to the twrp app and flash through there. Didn't work either. From then on every time I boot the device it shows the message "the system has been destroyed" and Bc of that I searched for solutions. I kinda found one. I boot to fastboot mode and with the platform tools I write on the command line ". /fastboot devices" and then it shows my device. After I write ". /fastboot boot continue" and it starts booting the device and it has worked for like 2 months but 2 days ago I had to reboot my device Bc it started to freeze but when I load to fastboot mode and plug it to the pc it show a prompt saying "the device is not recognized" and the device reboots to the message "system has been destroyed". Pls help, I've searched everywhere and didn't find any solution
Are you have your bootloader unlocked? I guess no, the most "easy" solution for your problem is test point , never fail, you need to download Qualcomm drivers (search in Google) open your device connect your device, your phone need to be recognized like 9008 in manager drivers of your PC then flash stock room in mi flash (flash all option) my recommendation is flash 10.0.13.0 or 10.0.18 version of stock rom, good luck.
Os_Herdz said:
Are you have your bootloader unlocked? I guess no, the most "easy" solution for your problem is test point , never fail, you need to download Qualcomm drivers (search in Google) open your device connect your device, your phone need to be recognized like 9008 in manager drivers of your PC then flash stock room in mi flash (flash all option) my recommendation is flash 10.0.13.0 or 10.0.18 version of stock rom, good luck.
Click to expand...
Click to collapse
Yes, my bootloader is unlocked, and is not recognized on the miflash tool.
I cant't even boot the phone to edl mode
0flip3 said:
Yes, my bootloader is unlocked, and is not recognized on the miflash tool.
I cant't even boot the phone to edl mode
Click to expand...
Click to collapse
you are trying to get to edl mode by typing command "fastboot oem edl" when phone is in fastboot?
hi all.
for recent days i am using my mobile Moto Z2 play i want to upgrade to android 10 using custom rom but its failed with error everytime . i unlocked bootloader and rooted . Please help me
error:
Start up failed:
Your device didnt start up successfully. Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Error: failed to load kernel!
Fastboot Reason: Fall-through from recovery boot mode USB connected
Go to last firmware pie retail ALBUS_PPS29.133-30_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml