This are the Asia Mango ROMs for the HTC HD7 and the HTC 7 Mozart.
This ROMs supports English, Traditional Chinese, and Simplified Chinese.
RUU_Mozart_S_hTC_Asia_WWE_4.06.707.00_5.69.09_RELEASE.exe
http://depositfiles.com/files/qx0ungbkd
RUU_Schubert_S_hTC_Asia_SEA_WWE_4.05.728.01_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
http://depositfiles.com/files/9du1fa8q5
!!!Warning!!! Users with HSPL devices must procede with caution.
Here is another link::
http://www.megaupload.com/?d=ZEHYYXGP
These ROMs support english
RUU_Mozart_S_hTC_Asia_WWE_ ...
RUU_Schubert_S_hTC_Asia_SEA_WWE_ ...
day2die said:
This is the Asia Mango ROMs for the HTC HD7 and the HTC 7 Mozart.
This ROMs also support Traditional Chinese and Simplified Chinese.
RUU_Mozart_S_hTC_Asia_WWE_4.06.707.00_5.69.09_RELEASE.exe
http://depositfiles.com/files/qx0ungbkd
RUU_Schubert_S_hTC_Asia_SEA_WWE_4.05.728.01_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
http://depositfiles.com/files/9du1fa8q5
Click to expand...
Click to collapse
OMG! It really comes.
How is for Trophy and Pro7?
How about the support of Japanese?(may be Korean as well)
Kudos day2die for your contributions!
Do you know if this is the same rom HTC is flashing on schubert (hd7) and mozart handsets in Taiwan starting today?
Again, many thanks -- cheers!
do you have the Asia_WWE ones, without the "SEA" because my device isn't compat with it, and i've amlost killed my phone by installing wrong image
aquanaut88 said:
Kudos day2die for your contributions!
Do you know if this is the same rom HTC is flashing on schubert (hd7) and mozart handsets in Taiwan starting today?
Again, many thanks -- cheers!
Click to expand...
Click to collapse
Yes, it is.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
henry084 said:
OMG! It really comes.
How is for Trophy and Pro7?
How about the support of Japanese?(may be Korean as well)
Click to expand...
Click to collapse
Well, this ROMs are for Taiwan and Taiwan only have the HTC HD7 and HTC 7 Mozart.
---------- Post added at 06:13 PM ---------- Previous post was at 06:07 PM ----------
aramadsanar said:
do you have the Asia_WWE ones, without the "SEA" because my device isn't compat with it, and i've amlost killed my phone by installing wrong image
Click to expand...
Click to collapse
You can use the image, just without signed spl.nbh.
thank you
Finally, a MANGO ROM with Chinese language pack...
By the way, I would like to know if the following procedure is correct to flash this:
1) download the package and remove the signed.nbh file..
2) shut down my Mozart and fire it on with VOL+DOWN button holding
3) run the RUUupdateutility.exe
4) wait for the flashing to finish
is this correct?
Also, details of my phone:
HTC Mozart worldwide generic phone bought in Malaysia
updated to NoDo through Official Zune and hence it is locked
OS: 7.0.7392.0
Firmware: 2250.21.13301.707
Hardware: 0004
Radio Software: 5.65.09.25_22.45.50.21U
Radio Hardawre: A.102.0.D4
Bootloader: 1.33.2250.1(123643)
any tutorial is appreciated. Thank you!
arbelnox, you will also need HSPL. It's a risky procedure if you want to try.
EDIT: I want to make clarification that HSPL is only require if your region is not supported.
My specs (Taiwan Device) are a bit different than yours:
OS: 7.0.7392.0
Firmware: 2250.21.30102.707
Hardware: 0002
Radio Software: 5.65.09.25a_22.45.50.21U
Radio Hardawre: A.102.0.D4
Bootloader: 1.33.2250.1(119314)
FWIW, both with and without SPL_signed.nbh produce invalid vendor (294) error.
I see... so HSPL is required... thank you... then I guess I will do some more studying first before proceed to flash it...
Thanks a lot
Just a quick heads-up...
On WP-Central, a user shows the Taiwan ROM with a slightly different version than the one uploaded by day2die.
http://www.wpcentral.com/mango-ruus-available-taiwan
The version shown for both Schubert and Mozart RUU's is 4.1.100.1332.
This appears to be different than 4.05.728.01. Maybe same file, different file names?
Where credit is due, the article references this thread.
Also in the article, it clarifies languages include Traditional Chinese, Simplified Chinese, English.
Cheers
i gog to update my HD7..... downloading the ruu now...
I'm going to go to my local Taiwanese HTC store and have my Mozart officially flashed this weekend. I'm currently running Mango 7714 and want to get proper version; Chinese language support will be a big bonus (as my girlfriend uses my phone alot, plus will increase re-sale value here in Asia).
My only concerns:
- I assume everything will be wiped by this re-flash? I have to reinstalled all apps, and will lose all sms messages?
- Will this leave my Mozart unbranded and on the official HTC update path via Zune? I'm worried Tango will come out and I'll be stuck on an old ROM..
- Should I revert back to Nodo before taking it to the shop?
- I'm a software developer, and I was planning on releasing an app for WP7. Live account is tied to the UK store. This won't affect my ability to test apps on the phone will will it?
Sorry for dumb questions, I'm not too clued up on WP7 ROM stuff
Well pretty sure I'm going to do it anyway as I want REAL Mango and would rather let the phone-shop take the risk of flashing. Will let you guys know how it goes!
yee ha.... done... now its RTM mango on my HD7.....
smoother then the beta...
---------- Post added at 02:12 PM ---------- Previous post was at 02:09 PM ----------
arbelnox said:
I see... so HSPL is required... thank you... then I guess I will do some more studying first before proceed to flash it...
Thanks a lot
Click to expand...
Click to collapse
i updated my HD7 and i dont have HSPL installed....
just went to bootloader mode (vol down and power up the phone) and wait for the PC to install the drivers, and then run RUU...just like the old days of WM6.5...
truffle1234 said:
yee ha.... done... now its RTM mango on my HD7.....
smoother then the beta...
---------- Post added at 02:12 PM ---------- Previous post was at 02:09 PM ----------
i updated my HD7 and i dont have HSPL installed....
just went to bootloader mode (vol down and power up the phone) and wait for the PC to install the drivers, and then run RUU...just like the old days of WM6.5...
Click to expand...
Click to collapse
really? Good... but what does this RTM actually means? "Release To Manufacturer"?
Anyway, so if I'm updating all the way using the Official Zune to get Stock NoDo in the past, I can just update using the RuuUpdate.exe from bootloader?
No other steps required at all?
truffle1234 said:
yee ha.... done... now its RTM mango on my HD7.....
smoother then the beta...
---------- Post added at 02:12 PM ---------- Previous post was at 02:09 PM ----------
i updated my HD7 and i dont have HSPL installed....
just went to bootloader mode (vol down and power up the phone) and wait for the PC to install the drivers, and then run RUU...just like the old days of WM6.5...
Click to expand...
Click to collapse
Would you mind telling me the display language options now on your HD7?
what to do if youre on DFT Freedom ROM to flash this ROM? DFT team said if you flash RUU i will loose my HSPL.
so is that means i can flash this ROM just fine?
Do I need This firmware .. My HD7 firmware is 7720..
day2die said:
Yes, it is.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
Well, this ROMs are for Taiwan and Taiwan only have the HTC HD7 and HTC 7 Mozart.
---------- Post added at 06:13 PM ---------- Previous post was at 06:07 PM ----------
You can use the image, just without signed spl.nbh.
Click to expand...
Click to collapse
well, i tried that, but it produces invalid vendor id error
Deleted posted
Why would you do that, in the first place?
Stuff like that really dont go on here one its not justt in a folder its in a hidden partition and 9 outa 10 times only reason someone wants to do somethin like this is cause there iemi is blacklisted which we do not support
---------- Post added at 10:04 AM ---------- Previous post was at 09:56 AM ----------
Basicly what u r asking is iemi tampering which is illeagle in most countries
如果你是中国的用户，请直接看这个帖子了解详情：http://bbs.wfun.com/thread-992275-1-1.html
Please ignore the quote here if you're not from China.
Click to expand...
Click to collapse
Have you bought the Phablet Cube WP10 T698 and soft bricked it? If the answer is yes, you're lucky.
I just got the stock firmware from a Chinese forum (In fact, it's from the quote above).
I don't know if it works on T598, but just give it a try.
How to use it:
1. Download the firmware I provided.
2. Extract the archive and install the driver. You may need to enter disable driver signature enforcement mode before install the driver if you're running 64-bit Windows. Please Google for it if you don't know how to enter.
3. Power off the phablet and enter the Recovery mode (A lightning with a cog in white) by press the combination key [Vol +] + [Power]. If you encounter boot loop, keep press the combination key until you see the lightning with a cog.
4. Open a command prompt with Administrator privileges and change the working directory to the place that you extracted the firmware. If you're using PowerShell, type "cmd" and execute before proceed. For example, if you extracted the firmware to "D:\CUBE_T698_Stock_FW\Firmware" , type the command below to change working directory.
Code:
cd /d "D:\CUBE_T698_Stock_FW\Firmware"
5. Connect your phablet to PC. After the phablet is recognized and the driver is installed, type the command below to check if your phablet is listed.
Code:
ffutool -list
6. If everything is ready, type the command below to flash the firmware.
Code:
ffutool.exe -flash flash.ffu
Following steps are really tricky, please read carefully.
7. After the firmware flashed, your phablet should reboot, and the phablet should enter the factory menu. Unplug your phablet, and tap "关机" (Power Off in Chinese), "确认" (OK in Chinese) to power off your tablet.
In case that you can't recognize Chinese character, I attached screenshots below.
8. After your phablet is completely powered off, re-enter the Recovery mode that display the lightning and cog.
9. Type the command below to disable factory menu.
Code:
ffutool -setBootMode 0
10. After your phablet reboots, you can finally use your phablet and pick a language.
11. You may need to use Interop Tools by @gus33000 to modify the model in order to get further updates. I recommend you to change the model to Lumia 650 since the specifications are similar.
According the experience the OP writed in the post I quoted, I attached the recommended version (1.5) below.
Code:
PhoneManufacturer=MicrosoftMDG
PhoneMobileOperatorName=000-CN
PhoneManufacturerModelName=RM-1154_15729
PhoneModelName=RM-1154
PhoneHardwareVariant=RM-1154
If the phablet doesn't contain the language you're speaking, please reply, I'll post another guide for installing extra languages to your phablet.
You may need the checksum of Stock Firmware:
Code:
File: CUBE_T698_Stock_FW.zip
Size: 1291801211 Bytes
MD5: 8817E33DEBD002900B745974B921FB61
SHA1: 8D327D9B2400BB1636584055DE1CF8D4BDD4F26C
CRC32: A6495317
have FFU? just use WPID
This golden information, and if you speak Chinese we need your help...
Hi there!
This is very very valuable information. Its good to know how to refresh the CUBE tablet! Now that we know for certain that the Cube can be flashed to the original firmware, what we need to know now if how to fix all the other outstanding problems, namely:
Problem 1: Display position on the screen
Problem 2: Netflix doesn't work on this device.
I need you to speak Chinese and visit the Chinese language wfun forum and ask Chinese developers how to fix the screen positioning and how to unblock Netflix and get Netflix to work on this device.
If you can help me, you are help the entire community of users who own the CUBE WP10 device.
Please help us solve the screen position problem and the Netflix problem.
(Also check all my other threads and post on the CUBE WP10 - It will help you know how much I know)
---------- Post added at 12:24 PM ---------- Previous post was at 12:08 PM ----------
From the bbs.wfun forum:
我实际使用中，有个值得注意的bug，表现为识别的触摸点比实际的触摸点要往屏幕下边偏移约2mm，而且主要表现在顶部位置，越往屏幕下方尝试，越不明显。
具体可以下载一个绘图APP测试。说这个bug完全不影响使用那是假的，只不过没有到难以接受的地步而已，平时不常点击顶部位置不会有所察觉（我也是点击智机社区APP顶部的签到和登录按钮之后才发现的）。这个bug还是希望厂家尽快放出解决方案，至少要在新售的机型里面解决，我自己也会尝试找找看能否用户自行修复。
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
屏幕偏移感觉无法接受
---------- Post added at 12:30 PM ---------- Previous post was at 12:28 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 01:11 PM ---------- Previous post was at 12:35 PM ----------
可惜屏幕有问题，我早就买了，屏幕一直有偏移=_=
klorofill said:
Hi there!
This is very very valuable information. Its good to know how to refresh the CUBE tablet! Now that we know for certain that the Cube can be flashed to the original firmware, what we need to know now if how to fix all the other outstanding problems, namely:
Problem 1: Display position on the screen
Problem 2: Netflix doesn't work on this device.
I need you to speak Chinese and visit the Chinese language wfun forum and ask Chinese developers how to fix the screen positioning and how to unblock Netflix and get Netflix to work on this device.
If you can help me, you are help the entire community of users who own the CUBE WP10 device.
Please help us solve the screen position problem and the Netflix problem.
(Also check all my other threads and post on the CUBE WP10 - It will help you know how much I know)
---------- Post added at 12:24 PM ---------- Previous post was at 12:08 PM ----------
From the bbs.wfun forum:
我实际使用中，有个值得注意的bug，表现为识别的触摸点比实际的触摸点要往屏幕下边偏移约2mm，而且主要表现在顶部位置，越往屏幕下方尝试，越不明显。
具体可以下载一个绘图APP测试。说这个bug完全不影响使用那是假的，只不过没有到难以接受的地步而已，平时不常点击顶部位置不会有所察觉（我也是点击智机社区APP顶部的签到和登录按钮之后才发现的）。这个bug还是希望厂家尽快放出解决方案，至少要在新售的机型里面解决，我自己也会尝试找找看能否用户自行修复。
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
屏幕偏移感觉无法接受
---------- Post added at 12:30 PM ---------- Previous post was at 12:28 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
敢问屏幕偏移是怎么解决的？
---------- Post added at 01:11 PM ---------- Previous post was at 12:35 PM ----------
可惜屏幕有问题，我早就买了，屏幕一直有偏移=_=
Click to expand...
Click to collapse
Yeah, I'm a Chinese and I'm glad to help you.
How do we fixe the display offset?
hikari_calyx said:
Yeah, I'm a Chinese and I'm glad to help you.
Click to expand...
Click to collapse
YESSSS!!! Okay is there anywhere on the internet where we can find a solution to the display positioning/offset problem.
可惜屏幕有问题，我早就买了，屏幕一直有偏移=_=
敢问屏幕偏移是怎么解决的？
Unfortunately, the screen has a problem, I have bought this long ago, the screen has been offset = _ = Dare I ask how to solve the screen offset?
I really really really want to fix the display position/Screen offset issue... I have be searching everywhere I can for answers for a 3 weeks now...
lehetne a telefon nyelvét magyarrá tenni????
phone menü hungaryan????
Has anyone figured out the Netflix issue? It seems to be with all paid content because Hulu is not working as well.
Previous message :
Hello,
Like i said in the title i got a problem when i flashed a new rom and now my k5 (version A6020a40) show lenovo and nothing. He apparead on windows as QUALCOMM HS-USB QDLoader 9008 (COM 3).
I tried to flash a new rom with QFIL and a rom by shreps but when i start the download he said previous firmware : (nothing) , new firmware : WS and failed to download.
Tried with
rom A6020a40_S029_160705_16G_ROW_qpst
rom A6020a40_S027_160519_16G_ROW_QPST
So if someone know or have an idea i take it
And sorry by advance i'm French so i lack of vocabulary
Thanks in advance
If any person have this problem try to do the rescue option of Lenovo Moto Smart Assisant.
It worked for me and i now have my system back with the stock firmware.
But you will have the stock rom so if you wan't to save your data i can't help you
no i have solve. ı can help. you dont know.
---------- Post added at 11:54 AM ---------- Previous post was at 11:53 AM ----------
i need 10 post.
---------- Post added at 11:55 AM ---------- Previous post was at 11:54 AM ----------
6 post left
HELLO TO ALL I AM NEW IN THIS ...
I'm bored and I have a lumia 820 to experiment
I was wondering if it is possible to install windows 10 for phones TECHNICAL PREVIEW in 2018
I found the CAB in a post of xda:
https://forum.xda-developers.com/windows-10-mobile/cab-windows-10-phones-t3029904
I'm just an amateur looking to experiment with the phones and I have nothing better to do. hahaha! :silly:
Excuse my bad English, is the google translator.
You won't be able to upgrade to Windows 10 with the two cabs that is in the link.
---------- Post added at 06:08 AM ---------- Previous post was at 06:07 AM ----------
https://forum.xda-developers.com/windows-10-mobile/guide-win10-mobile-offline-update-t3527340/page37 try to follow this thread to upgrade to Windows 10
you need installed lumia denim. it will easy to install win 10 mobile